Does this Budget $140 AliExpress 10GbE Switch Deserve Your Data?

The landscape of 10 Gigabit Ethernet networking has seen a significant shift over the past few years, with hardware that was once considered enterprise-only gradually trickling down to the consumer and prosumer market. Affordable multi-gig switches, particularly those with 2.5G or SFP-only configurations, are now commonplace. However, the search becomes much more complicated when you’re looking for a compact, budget-friendly 10GbE switch that combines both RJ45 copper and SFP+ fiber ports — and adds basic managed features to the mix. This is precisely where the Goodtop 6-Port 10GbE Managed Switch positions itself, offering four 10GBase-T ports, two SFP+ ports, and a claimed 120Gbps backplane bandwidth, all for around $140 on AliExpress.

At this price point, it’s important to approach products like this with realistic expectations. The Goodtop switch is not aiming to compete with the likes of Cisco, Aruba, or even MikroTik in terms of long-term support or security posture. Like many white-label or lesser-known brands shipping out of China, concerns around firmware transparency, update frequency, and potential vulnerabilities are valid. This is particularly relevant for users planning to expose management interfaces to external networks or integrate these switches into larger, more sensitive environments. Still, for isolated use in lab setups, home networks, or behind firewall-protected infrastructure, devices like this can offer compelling value — if they deliver on core functionality. This review takes a closer look at the Goodtop switch’s physical design, port configuration, internal hardware, software interface, and performance characteristics. Rather than focusing on theoretical specs alone, this analysis is based on hands-on testing to determine where the unit succeeds, where it cuts corners, and what kind of buyer it’s realistically suited for.

Goodtop Budget 6 Port 10GbE Switch Review – Quick Conclusion

The Goodtop 6-Port 10GbE Managed Switch delivers impressive value by combining four 10GBase-T and two 10G SFP+ ports in a compact, low-cost form factor, making it one of the most affordable mixed-media 10GbE switches on the market. It performs reliably under load, supports a full set of essential Layer 2 features like VLANs, link aggregation, and QoS, and provides a practical way for home lab users or small setups to adopt 10G networking without overspending. However, the switch’s low price is reflected in its build quality, fixed-speed noisy fan, and a barebones, unintuitive web interface that may challenge less experienced users. Security features are minimal, with no HTTPS, 2FA, or multi-user support, making it best suited for isolated, firewall-protected environments rather than critical infrastructure. For technically confident users seeking affordable, high-speed connectivity in a controlled setting, the Goodtop switch is a capable and cost-effective option—as long as its limitations are clearly understood.

Goodtop Budget 6 Port 10GbE Switch Review – Design

The Goodtop 6-Port 10GbE switch adopts a compact footprint and minimalist industrial design that aligns with many of the budget-friendly networking products emerging from OEMs in the Chinese market. Its chassis measures 200mm x 118mm x 44mm and is constructed from a thin, painted sheet metal. At just under 700 grams, the device is easy to handle and unobtrusive on a desk or shelf. It supports both desktop placement and wall mounting, the latter made possible by a pair of hook points integrated into the casing. While the construction is adequate for light to moderate use, it doesn’t offer the heft or rigidity seen in more enterprise-leaning gear.

There are no rubber feet to reduce surface vibration, nor any rack-mounting ears included by default. The paint finish is clean but basic, and minor flexing of the panels is possible under moderate pressure. These design choices reflect an emphasis on affordability rather than robustness, and users intending to deploy this switch in harsher physical environments may want to consider added enclosure or structural reinforcement. Still, for indoor use where vibration and temperature control are consistent, the physical form is entirely serviceable.

Thermal management is handled by a single small-diameter fan mounted laterally inside the chassis, supported by perforated ventilation cutouts on the opposing side. This active cooling setup is necessary given the heat output of the internal 10GbE components, particularly when all ports are under load.

During testing, the fan proved effective in maintaining safe thermal levels across typical workloads, with internal temperature readings ranging between 31°C and 36°C depending on ambient conditions and port usage. However, the fan’s acoustic characteristics are worth noting: it operates at a fixed RPM, regardless of system temperature or network activity.

This results in a constant hum that registers between 38 and 41 dBA — not excessive, but certainly noticeable in quiet environments. There are no accessible fan speed controls in the management interface, and the unit lacks thermal sensors or thresholds that would allow for adaptive fan curves.

For users operating this switch in a studio, home office, or any acoustically sensitive environment, the persistent fan noise could be a drawback. Modifications, such as third-party silent fan replacements, may be feasible but would require disassembly and some DIY effort. Overall, the cooling solution works, but its implementation is clearly a compromise between function and cost.

Goodtop Budget 6 Port 10GbE Switch Review – Hardware & Connections

The Goodtop switch is equipped with a total of six 10-Gigabit-capable ports, split between four RJ45 (10GBase-T) and two SFP+ slots. This particular configuration is uncommon at this price tier, especially among switches that offer web-based management. The inclusion of both copper and fiber interfaces in one device provides flexibility for mixed network environments — ideal for users bridging legacy copper infrastructure with newer fiber deployments or integrating NAS devices and uplinks with varying interface standards. All six ports are located on the front panel, clearly labeled and spaced far enough apart to accommodate bulkier cables and transceivers without interference.

The RJ45 ports support standard multi-gig Ethernet protocols, with backward compatibility for 100Mb, 1G, 2.5G, and 5GBase-T connections, depending on cabling. According to the manufacturer’s specs, Cat6 or better is recommended for full 10GBase-T performance up to 100 meters.

The SFP+ ports accept a wide range of 10G transceivers, including DACs (Direct Attach Copper), SR/LR fiber modules, and media converters, offering strong compatibility with third-party optics and hardware.

Despite its low cost, the switch claims a 120Gbps backplane switching capacity and a non-blocking architecture capable of 89.28 million packets per second. While exact benchmarking under full simultaneous port saturation wasn’t possible due to hardware limitations during testing, four concurrent 10GBase-T connections were tested successfully with sustained bidirectional transfers.

Under load, the unit handled transmission reliably without packet loss or obvious performance degradation. Power consumption scales with usage: idle draw sits at approximately 7.5 watts with no connected clients, while active use with four 10G copper links under sustained read/write activity peaked around 19.8 watts.

These values are in line with expectations for a full-10G switch operating with active cooling, and while not low, they are acceptable for most desktop or lab environments. It’s worth noting that due to heat generation and airflow limitations, users may experience rising internal temperatures if all six ports are driven continuously, especially in poorly ventilated setups. However, the flexibility to use either media type and the stable throughput on tested ports suggest that the internal switching logic and port handling are effectively implemented, given the device’s pricing and market position.

Internally, the Goodtop 6-Port 10GbE switch is built around a Realtek chipset configuration comprising the RTL9303 switch controller and RTL8264B PHYs, a pairing commonly found in recent budget and white-label 10G networking products. These components are designed to deliver basic Layer 2 managed functionality with support for VLAN tagging, link aggregation, and other expected switching features. Two medium-sized aluminum heatsinks cover the main chips, with thermal paste applied to ensure contact and heat dissipation, albeit passively reliant on the unit’s single fan for airflow. There is no internal battery backup, surge suppression beyond nominal protection, or modular power regulation — design choices consistent with its low cost.

The unit includes a modest 12Mbit of packet buffer memory and supports a MAC address table size of up to 16K entries, which should be sufficient for most small-to-medium environments. There are no removable components or visible debugging headers, and the board layout is straightforward with no major thermal bottlenecks observed during operation. Overall, the hardware design is minimal but appropriate for the target use case: non-critical environments requiring inexpensive multi-gig connectivity without expectations of advanced redundancy or hardware resilience. While it doesn’t compete with enterprise-class internals in terms of engineering quality or extensibility, it does reflect a competent implementation of entry-level switching silicon with functional thermal management.

Goodtop Budget 6 Port 10GbE Switch Review – Software

The Goodtop switch ships with a built-in web-based management interface that allows users to configure a range of Layer 2 features typical of entry-level managed switches. The interface is accessible via a browser once an IP address is assigned, and no additional software is required. However, the overall presentation and usability of the software are quite basic. The UI lacks visual polish, contextual help, or guided configuration tools. Navigation is functional but unintuitive, with much of the terminology and layout appearing generic and unbranded — a likely result of the firmware being repurposed from a reference design or OEM platform.

There are no wizards or safety prompts to prevent misconfiguration, which could make the switch challenging for less experienced users to manage safely. Additionally, there is no mobile optimization or official companion app, and the interface does not support HTTPS out of the box. Firmware updates are possible via the web console, though update channels or changelogs are not provided, and documentation is sparse.

Despite its limited interface design, the switch includes a solid range of features that are normally found in more expensive units. These include core Layer 2 controls and essential traffic management capabilities, offering flexibility for VLAN segmentation, link aggregation, and network troubleshooting. While these features are mostly geared toward technical users, they cover a surprisingly broad spectrum of functionality for a switch in this price bracket. However, it’s worth noting that the interface offers no access controls beyond a single user account, no two-factor authentication, and no role-based access — all of which may concern users deploying this switch in sensitive or multi-user environments. Fan speed control, system logs, or SNMP monitoring are also absent, limiting the unit’s viability for more advanced administrative needs. Key supported features include:

• VLAN support (802.1Q, VLAN IDs 1–4094)

• Port-based VLAN assignment

• Link Aggregation (LACP)

• Loop detection

• Jumbo frame support (up to 9K bytes)

• MAC address filtering

• Port mirroring

• Broadcast storm control

• QoS / Port-based priority settings

• Traffic statistics monitoring

• Basic firmware upgrade support

These tools are adequate for static network environments or those with fixed segmentation needs, but administrators seeking dynamic configuration, remote logging, or integration with monitoring platforms will find the software lacking in depth.

Goodtop Budget 6 Port 10GbE Switch Review – Verdict and Conclusion

The Goodtop 6-Port 10GbE Managed Switch offers an appealing combination of features that are rarely found together in a product at this price point. With four 10GBase-T copper ports and two 10G SFP+ fiber slots, it caters to users who need to bridge different media types without investing in multiple specialized devices. The unit delivers consistent throughput, a practical management interface, and baseline Layer 2 capabilities suitable for most small-scale, static deployments. For those building or expanding home labs, adding high-speed links between servers and NAS devices, or testing 10GbE equipment without committing to enterprise-level budgets, this switch is a very practical and accessible option. The price tag — typically hovering between $130 and $140 — is particularly compelling when compared with similar switches from established brands, which often cost two to three times as much while offering fewer ports or omitting management functionality.

However, it’s important to understand what trade-offs make that low cost possible. Physically, the unit is built with budget-grade materials, and although the compact design is functional, the thin metal chassis lacks the rigidity and passive cooling features seen in more expensive models. The inclusion of active cooling is necessary given the switch’s full 10GbE capability, but the fixed-speed fan results in a persistent acoustic presence that may not be acceptable in quiet workspaces. In terms of power usage and thermal output, the switch performs within expectations, though it naturally draws more power than multi-gig or 1G devices — something to consider if operating in environments sensitive to power efficiency or heat buildup.

On the software side, the web-based management interface includes a reasonably full feature set for configuring VLANs, link aggregation, QoS, and port monitoring, but the UI is visually dated, lacking intuitive navigation, helpful prompts, or contextual explanations. For seasoned users comfortable with networking terminology and manual configuration, this isn’t a major obstacle. However, newcomers may find the software overwhelming or difficult to use without external guidance. Security is another area where the switch shows its limitations. The absence of HTTPS access, multi-user management, or basic features like two-factor authentication limits its suitability for exposed or multi-tenant environments. Firmware updates are possible, but no public update path or official support channels are offered, making long-term update viability uncertain.

Ultimately, this is a product built around value — and that value is real, as long as buyers know what they’re getting into. The Goodtop switch does not pretend to be a polished enterprise-grade solution, nor does it offer the ecosystem integration or long-term support found in more expensive alternatives. Instead, it provides raw functionality: six full-speed 10GbE ports, a working management layer, and compatibility with a wide range of copper and optical transceivers. For environments that are self-contained, technically managed, and not security-critical, this device offers performance that aligns well with its low cost. For those willing to make small compromises on build quality and user experience, it’s an excellent option for extending 10G connectivity without overspending.

Join Inner Circle

Want to follow specific category? Also Read...N7 AMD 2x 10GbE NAS MotherboarN7 AMD 8845HS 2x 10GbE NAS MotCWWK M8 N150/N355 10Gbe NAS BoCWWK M8 N150/N355 10Gbe NAS BoSynology PS Series Managed 10GSynology Managed 10GbE PoE NetBest QNA-UC10G2T priceGoodtop Budget 6 Port 10GbE MaUniFi USB4/TB4 to 10GbE AdapteUniFi USB4/TB4 to 10GbE Adapte Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

GL.iNet Comet Pro Review

The GL.iNet Comet Pro is the company’s latest remote KVM (Keyboard, Video, Mouse) solution, launched on Kickstarter with shipping scheduled for December 2025. Unlike standard remote desktop tools that require a functioning operating system, a KVM device operates at a much lower level, providing access from cold boot and BIOS onward. This allows users to troubleshoot, install operating systems, and manage systems without direct physical interaction. Positioned as both an upgrade to GL.iNet’s original Comet KVM and as a potential rival to the JetKVM, which attracted considerable attention in 2024, the Comet Pro integrates more modern hardware and a larger feature set. The device includes a quad-core ARM Cortex-A53 processor, 1GB of DDR3 memory, 32GB of onboard eMMC storage, and a 2.22-inch touchscreen for configuration. Alongside HDMI passthrough supporting up to 4K at 30 FPS, it also incorporates Wi-Fi 6 connectivity, Gigabit Ethernet, and a range of accessory integrations such as an ATX power board and Fingerbot for remote power cycling. Early backers can pledge from $99, with campaign tiers running up to $155 depending on bundles, and at the time of writing, the campaign has surpassed £200,000 in pledges with more than 1,900 supporters.

GL.iNet Comet Pro Review – Quick Conclusion

The Comet Pro is a compact KVM device that builds on the foundations of earlier solutions with stronger hardware, built-in storage, dual HDMI with passthrough, and both wired and Wi-Fi 6 connectivity, making it practical for local and remote management tasks. Its touchscreen interface, bundled cables, and accessory support via the ATX board and Fingerbot give it utility beyond basic KVM duties, while low power draw and stable thermals make it suitable for 24/7 use. However, its design also brings limitations, most notably the fixed 32GB eMMC storage with no expansion, the absence of PoE for simplified cabling, and just 1GB of RAM, which may restrict headroom for heavier workloads. Compared with the JetKVM, the Comet Pro is more expensive but offers significantly higher specifications, a more polished and consumer-ready experience, and wireless deployment options, whereas JetKVM appeals to those who prioritise affordability, open-source flexibility, and community-driven extensions. Ultimately, the Comet Pro is best suited for users seeking a stable, ready-to-use appliance, while JetKVM remains the choice for enthusiasts who prefer a leaner, hackable platform.

Important! This is not ‘traditional retail’, this is Crowdfunding!

It is important to note that the Comet Pro is currently a crowdfunding product and not a retail release. Backing through Kickstarter carries inherent risks, as funding a campaign does not guarantee delivery, nor does it ensure the final product will exactly match the early prototypes or promises made during the campaign. GL.iNet has a history of successfully shipping crowdfunded devices, but manufacturing delays, component shortages, or design changes can still occur. Potential backers should approach pledging with awareness of these risks and only commit funds they are comfortable waiting on until the estimated December 2025 shipping window, bearing in mind that schedules may shift.

GL.iNet Comet Pro Review – Design

The Comet Pro adopts a compact desktop form factor measuring 93 × 84 × 47 mm and weighing just 170 g, making it small enough to sit discreetly on a desk or beside a server rack without occupying unnecessary space. Despite this minimal footprint, it integrates a 2.22-inch colour touchscreen on the front panel, which plays an important role in the day-to-day use of the device. This screen is not only employed during initial setup for Wi-Fi and PIN entry but also allows the user to directly toggle remote services on or off, adjust brightness, and check status information such as uptime or network configuration.

Unlike entry-level KVMs that demand all management through a browser, the inclusion of a touchscreen brings a more immediate, appliance-like feel to the unit. Heat management has also been considered, with the case designed with discreet venting along the underside to maintain airflow during continuous operation. In extended sessions, surface temperatures were recorded at up to 49°C at the base, but without throttling or stability issues, showing the design can sustain 24/7 deployment.

Visually, the device takes a utilitarian approach, using a clean matte finish and prioritising ease of connection rather than elaborate styling. One of the more practical design decisions is the use of full-sized HDMI input and output ports. Many compact alternatives rely on mini HDMI or adapter cables, which can create points of failure or add cost, whereas the Comet Pro provides standard connections that integrate directly with PCs, NAS units, or workstations.

The rear panel arranges all I/O in a straightforward, linear layout, including Ethernet, USB power, USB-A for accessories, and the dual HDMI ports, reducing clutter and keeping cable routing manageable. This makes the device particularly well suited for semi-permanent setups where it may sit behind a desk or alongside other networking gear. GL.iNet has also bundled a complete set of cables in the package, including HDMI, USB-C to USB-C, USB-C to USB-A, and Ethernet, ensuring the unit can be deployed without requiring third-party accessories.

Build quality and practicality are at the centre of the Comet Pro’s design choices. At under 200 g, it is easy to reposition, mount, or carry between locations, yet solid enough that it will not slide around when multiple cables are connected. The lack of Power over Ethernet (PoE) is one area that has already drawn attention, as many users favour a simplified single-cable setup that combines power and network.

Instead, the Pro model must rely on USB-C power delivery or its bundled 10 W PSU, which while flexible, requires additional cabling. GL.iNet has confirmed that PoE support is reserved for its separate Comet PoE model, meaning the Pro prioritises wireless and accessory integration instead. Even so, its physical layout and cable-friendly design suggest it is intended for regular use in homelabs, testing environments, or small professional deployments where convenience and low-profile form factor matter more than absolute minimal wiring.

GL.iNet Comet Pro Review – Internal Hardware & Storage

Inside the Comet Pro, GL.iNet has opted for a quad-core ARM Cortex-A53 processor paired with 1GB of DDR3 memory. This is a significant step up from entry-level KVM devices that rely on single-core or lower-clocked CPUs with a fraction of the RAM. In practice, this extra horsepower allows the Comet Pro to handle simultaneous HDMI input and passthrough, touchscreen responsiveness, and background tasks like network services without becoming sluggish. During testing, the system was able to manage multiple connections while remaining responsive, though the limited RAM may still cap future feature expansions. The use of DDR3 memory rather than newer DDR4 or LPDDR standards reflects a balance between cost and compatibility, keeping the device affordable while still delivering adequate performance for its class.

For storage, the Comet Pro is equipped with 32GB of onboard eMMC. This capacity is well above the minimal storage seen in many competing KVM devices, and it serves two primary functions. First, it can be used to host multiple ISO images, allowing the user to boot or reinstall different operating systems remotely without attaching physical media. Second, it can act as a mounted USB drive that provides read and write access to files directly from the host system. While these features add flexibility, the storage has limits. The lack of an SD card slot or USB-based expansion option means the 32GB is fixed, and transfer speeds during testing averaged between 23–25 MB/s. This is sufficient for smaller ISO files or driver discs but noticeably slower when handling larger media.

The choice of eMMC storage also reflects GL.iNet’s attempt to balance convenience with simplicity. eMMC is compact, inexpensive, and integrated directly onto the board, reducing complexity compared to SATA or NVMe alternatives. However, this comes at the cost of speed and upgradability. For most use cases—boot images, firmware updates, and light file transfers—the built-in storage will suffice. Yet users hoping to load multiple large OS images or transfer substantial file sets may find the limits more apparent. Overall, the hardware inside the Comet Pro prioritises straightforward functionality and self-contained operation, providing just enough headroom to support modern usage without straying into higher-cost hardware that would push the device beyond its current Kickstarter pricing tiers.

GL.iNet Comet Pro Review – Ports and Connections

The Comet Pro provides a straightforward but practical set of external connections designed to balance usability with broad compatibility. On the rear panel, users will find a Gigabit Ethernet port, USB-C power input, a USB-A accessory port, and two full-sized HDMI ports for input and output. Unlike some compact KVMs that opt for mini HDMI or USB-based video, GL.iNet has chosen to include full HDMI, reducing the reliance on adapters and making the unit easier to integrate directly into PCs, NAS systems, or servers. This makes it more suitable for users who want a clean installation without juggling conversion cables. The layout also keeps ports well separated, which helps prevent cable congestion when all are in use.

One of the standout design choices is the dual HDMI configuration, offering both an input for capturing video from the host system and a passthrough for maintaining a local display connection. This allows the device to operate in the background without interrupting a user’s normal monitor setup, an advantage for environments where physical access is still required while also keeping remote access enabled. The USB-A port expands functionality further by supporting accessories such as the optional ATX power board and Fingerbot, which extend control over physical system states. These add-ons use standard USB 2.0 signalling, keeping integration simple, while enabling functions like remote power cycling or triggering a hardware reset at the press of a button.

Networking is handled through a single RJ45 Gigabit Ethernet port alongside built-in Wi-Fi 6 support, giving the user flexibility between wired and wireless setups. While the Ethernet interface provides the most stable connection, the inclusion of dual-band Wi-Fi means the Comet Pro does not require a physical LAN cable in every scenario, broadening its deployment options for homelab users or portable testing environments. However, the device lacks Power over Ethernet (PoE) capability, meaning power and network must be provided separately. GL.iNet has directed PoE-focused users to their Comet PoE variant, leaving the Pro model better suited for those prioritising wireless convenience and accessory integration.

• 1 × RJ45 Gigabit Ethernet (10/100/1000)

• 1 × USB Type-C (Power Input, 5V 2A with PD support)

• 1 × USB 2.0 Type-A (Accessory connection, e.g., ATX board, Fingerbot)

• 1 × HDMI Input (Full size)

• 1 × HDMI Output (Full size, passthrough up to 4K@30fps)

GL.iNet Comet Pro Review – Performance and Tests

In practical testing, the Comet Pro demonstrated stable operation across both local and remote connections. When deployed on a local area network over Gigabit Ethernet, video output remained smooth, with latency kept to levels that were difficult to notice in everyday use. The passthrough HDMI supported up to 4K at 30 FPS or 1080p at 60 FPS, making it suitable for both configuration tasks and lighter remote interaction. While not designed for high-performance gaming, the device handled operating system installations, BIOS configuration, and desktop navigation without visible delay. Remote testing via GL.iNet’s relay service also showed responsive behaviour, though these tests were conducted early in the campaign with relatively few users active, making it unclear how well the service will scale under heavier demand.

The device’s quad-core ARM Cortex-A53 processor and 1GB of RAM proved sufficient to manage transcoding and stream adjustments when accessing via browser or desktop applications. The integrated H.264 encoding allows the unit to downscale or compress the video feed to accommodate lower-bandwidth scenarios, ensuring remote sessions remained usable even when connection quality fluctuates.

Audio support, both through HDMI and USB, added another layer of functionality for remote collaboration or troubleshooting, though microphone activation required restarts to take effect. During prolonged use, the touchscreen interface remained responsive, and system access features such as security PINs and two-factor authentication functioned as expected, providing a secure operating baseline.

Storage performance, while not fast, was consistent. Writing data to the 32GB eMMC averaged between 23–25 MB/s, which was sufficient for uploading ISO images and driver discs but noticeably slower for large files. Virtual media mounting worked reliably, allowing ISO files to be presented to the host system as if they were locally connected USB drives.

File sharing via the remote mount function extended this further, making the KVM’s internal storage act as a conventional drive from within the connected operating system. This feature proved useful for transferring smaller files such as utilities or configuration scripts but was limited by the inherent speed of the eMMC storage.

Power consumption during testing remained low, with idle draw measured between 1.5 and 2.5 W and heavier operation drawing up to 4.5 W. Temperatures were also within safe limits, peaking at around 49°C under continuous use with all ports occupied. Importantly, the system did not throttle or show instability during extended testing periods.

While the absence of PoE limited deployment flexibility, the ability to power the device either via the included 10 W PSU or from a client USB port added some versatility. Taken as a whole, the performance tests suggest that the Comet Pro is capable of delivering reliable day-to-day remote access for administrative tasks, though it is not intended for high-throughput or latency-sensitive workloads.

• Video Output: 4K@30 FPS, 1080p@60 FPS

• Encoding: H.264 hardware encoding confirmed

• Average Latency: ~30–60 ms (local and remote, tested)

• Storage Write Speed: 23–25 MB/s (32GB eMMC)

• Idle Power Draw: 1.5–2.5 W

• Active Power Draw: Up to 4.5 W

• Operating Temperatures (Tested): 40–49°C surface depending on panel location

Comet Pro vs JetKVM – Which Should You Buy?

When comparing the Comet Pro to the JetKVM, the most immediate difference is in hardware resources. The Comet Pro offers a quad-core ARM Cortex-A53 processor, 1GB of DDR3 memory, and 32GB of eMMC storage, while the JetKVM relies on a single-core Cortex-A7 CPU with 256MB of RAM and either 4GB or 16GB of eMMC depending on version. This gives the Comet Pro considerably more capacity to handle multiple connections, virtual media, and remote management tasks. The inclusion of a larger 2.22-inch touchscreen further expands its usability, particularly for setup and local controls, whereas JetKVM uses a smaller 1.69-inch panel with more limited functions. From a purely technical perspective, the Comet Pro is the more capable unit, but this comes with a higher entry price.

Networking and connectivity also reveal differing priorities. The Comet Pro includes both Gigabit Ethernet and Wi-Fi 6 dual-band support, allowing deployment without wired LAN, while the JetKVM only provides a 100 Mbps Ethernet port and no wireless option. JetKVM compensates for this with a lightweight, open-source software stack built around WebRTC, which emphasises speed and hackability for developers. It also features an RJ11 extension port for add-ons such as ATX control boards and DC power modules, encouraging community-built extensions. The Comet Pro instead integrates accessory support through USB, offering officially developed add-ons like the ATX board and Fingerbot, but with less emphasis on third-party modification. In short, JetKVM is more open and extensible, while Comet Pro is more self-contained and focused on out-of-the-box deployment.

Price and ecosystem support are another dividing factor. JetKVM launched on Kickstarter at $69 and built momentum on being affordable, transparent, and entirely open source. The Comet Pro starts at $99 for early backers and scales up to $155 for bundles, reflecting its higher hardware cost and added features. JetKVM’s community-driven development and open licensing have made it popular with enthusiasts who value hackability and long-term flexibility, whereas GL.iNet’s approach with the Comet Pro aligns more with a polished, consumer-ready appliance that still integrates optional remote cloud services. Choosing between them comes down to priorities: those seeking raw affordability and open-source collaboration may lean toward JetKVM, while those preferring a more powerful, integrated, and wireless-capable KVM will find the Comet Pro the stronger candidate.

GL.iNet Comet Pro Review – Conclusion & Verdict

The Comet Pro stands out as a more advanced and accessible interpretation of the compact KVM concept, incorporating stronger internal hardware, built-in storage for ISO management, and dual HDMI with passthrough that makes it practical for both remote and local use. The addition of Wi-Fi 6 support expands deployment flexibility, removing the need to always run physical network cables, while the integrated touchscreen interface allows for quick setup and control without relying solely on external software. During extended tests, it maintained stable operation with modest temperatures and low power consumption, making it suitable for continuous use in homelabs or small offices. The inclusion of accessory support, such as the ATX board for full remote boot control and the Fingerbot for physical power cycling, highlights GL.iNet’s attempt to broaden its appeal beyond simple KVM duties into more complete system management. At the same time, limitations such as fixed 32GB eMMC storage with no expansion options, reliance on external power rather than PoE, and the use of only 1GB of RAM show that the product remains firmly aimed at the consumer and prosumer segment rather than enterprise-grade installations.

When placed against the JetKVM, the decision largely depends on what the user values most in a remote management device. JetKVM has built its reputation on affordability, transparency, and openness, offering a $69 price point, an entirely open-source software stack, and an extension port that allows for custom add-ons developed by the community. For enthusiasts, developers, and those who prefer long-term flexibility, it remains an appealing choice.

In contrast, the Comet Pro arrives at a higher entry cost of $99–$155 depending on bundle but compensates with significantly stronger specifications, built-in wireless connectivity, and a more polished, consumer-ready experience that does not require modification or third-party involvement to be fully functional. Kickstarter progress, with more than £200,000 pledged and nearly 2,000 backers already, suggests demand for such a ready-made solution exists. For users who want a stable appliance with a straightforward setup process and modern hardware, the Comet Pro provides the stronger option. For those prioritising hackability and community-driven development above convenience, JetKVM remains the leaner and more customisable alternative.

Join Inner Circle

Want to follow specific category? Also Read...GL.iNet Comet Pro ReviewDo You NEED a WiFi 7 Travel RoGl.iNet Slate 7 WiFi 7 Travel GL.iNet Slate 7 (GL-BE3600) PoGL.iNet Slate 7 (GL-BE3600) PoGL.iNet Puli AX Mobile Router GL.iNet Puli AX Mobile Router Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Terramaster D4 SSD USB4 Enclosure Review

The Terramaster D4 SSD is a four-bay all-flash storage enclosure designed for high-speed external data handling over USB4 connectivity, offering bandwidth of up to 40Gbps. It accommodates four PCIe NVMe M.2 2280 SSDs, allowing a maximum raw capacity of 32TB when fitted with 8TB drives, with larger capacities possible pending future verification. Aimed at professional workflows such as media creation, high-resolution video production, and post-production editing, it is also marketed for gaming environments where low-latency loading and direct game installation are desired. The enclosure does not feature built-in RAID capabilities, instead operating in single-drive mode and relying on the host computer or third-party software for RAID management when required. Measuring 138 x 60 x 140 mm and weighing 392grams, it offers a compact footprint suitable for desktop or mobile editing setups. With active cooling via dual smart fans, wide voltage power input for flexible deployment, and compatibility across USB4, Thunderbolt 3/4/5, and USB 3.x interfaces, the D4 SSD is designed to integrate seamlessly with both Mac and Windows systems, including use as a Mac OS boot drive or as direct expansion for NAS devices with supported ports.

Terramaster D4 SSD Review – Quick Conclusion

The Terramaster D4 SSD is a compact four-bay USB4 NVMe enclosure that delivers high transfer speeds through dedicated PCIe Gen4 x1 lane allocation per drive, managed by the ASMedia ASM2464PDX controller for consistent scaling across single or multiple SSD configurations. While it lacks built-in hardware RAID, this simplifies design, reduces power draw, and allows users to manage RAID through their host system or software tools, offering flexibility for performance or redundancy needs. In testing, it sustained multi-gigabyte throughput under prolonged load without thermal throttling, aided by its dual smart-fan cooling system and low-noise operation, making it suitable for studios and mobile production environments. Its wide voltage input range supports power from standard laptop and mini-PC adapters, and cross-platform compatibility extends to Thunderbolt 3/4/5 and USB 3.x systems, with support for multiple file systems across macOS, Windows, and Linux. Best suited for professionals in media production, post-processing, and high-resolution video editing, the D4 SSD offers a strong balance of speed, efficiency, and portability, though buyers should account for the cost of high-capacity NVMe drives and may wish to add heatsinks for heavy workloads.

BUILD - 10/10

HARDWARE - 7/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 8/10

8.4

PROS

High-speed USB4 interface with up to 40Gbps bandwidth, delivering strong multi-bay NVMe performance.
Dedicated PCIe Gen4 x1 lane allocation per slot ensures predictable scaling without lane-sharing bottlenecks.
Compact and lightweight chassis with active cooling and low noise output, suitable for quiet work environments.
Cross-platform compatibility with Thunderbolt 3/4/5 and USB 3.x, supporting multiple file systems for macOS, Windows, and Linux use.
Low power consumption, even under full load, making it efficient for continuous operation.

CONS

No built-in hardware RAID functionality, requiring RAID to be managed by the host system or third-party software.
No included NVMe heatsinks, which may be needed for sustained heavy workloads.
Performance dependent on host system capabilities and RAID configuration, limiting maximum speeds in some setups.

Where to Buy a Product
			VISIT RETAILER ➤
			VISIT RETAILER ➤

Terramaster D4 SSD Review -Design and Storage

The Terramaster D4 SSD adopts a compact and minimalist design that prioritises space efficiency while accommodating high-performance M.2 NVMe storage. The chassis is constructed with a combination of metal and reinforced plastic to balance durability with weight reduction, making it practical for desktop setups or mobile editing stations. Measuring 138mm in height, 60mm in width, and 140mm in depth, it has a footprint smaller than many portable RAID enclosures yet houses four internal M.2 2280 slots. Ventilation is a key part of the design, with perforations along the chassis and an internal airflow path from the bottom intake to the top exhaust. This airflow design is paired with a smart dual-fan system to keep temperatures stable under sustained workloads. The minimalist exterior is free of unnecessary styling, focusing instead on functionality and discrete operation in professional environments.

Internally, the storage layout is based entirely on NVMe architecture, with each of the four bays supporting PCIe Gen4 x1 bandwidth allocation. This ensures each SSD has dedicated lane access to maintain predictable throughput, rather than sharing limited controller bandwidth as seen in some lower-cost enclosures. The D4 SSD supports up to 8TB per drive, giving a maximum raw capacity of 32TB, though higher capacities may be supported as larger consumer and enterprise NVMe drives are verified. This design choice prioritises performance consistency and reduces the risk of bottlenecks, particularly when drives are accessed simultaneously for large file transfers or multi-stream media editing.

The enclosure is not equipped with a hardware RAID controller, meaning all drives operate in independent single-disk mode by default. Users wishing to configure RAID 0, 1, or other levels must do so using their operating system’s built-in storage management tools or third-party RAID software. This approach reduces internal complexity, lowers power draw, and avoids thermal buildup from additional processing hardware, but shifts configuration responsibility to the user. For some workflows, particularly those involving high-performance NVMe SSDs, host-managed RAID can still deliver substantial speed gains without affecting compatibility.

For cooling, the D4 SSD uses an active design with two 50mm temperature-controlled fans. These are managed by four onboard temperature sensors, adjusting fan speeds based on workload and heat generation. The airflow design is optimised to pass directly over the NVMe modules and the mainboard’s heat-generating components. While the unit does not include NVMe heatsinks by default, there is space to install aftermarket options if desired. Terramaster’s decision not to bundle heatsinks reflects a balance between cost and compatibility, as different SSDs have varying thermal needs, and some users may prefer specific heatsink designs.

From a noise and usability standpoint, the D4 SSD is intended to operate unobtrusively in environments such as home offices, studios, and editing suites. In standby mode with SSDs installed, the noise level is measured at 19dB(A), making it quieter than many desktop PCs and suitable for near-silent workspaces. Combined with its small physical footprint, this makes it a storage device that can be positioned close to the user without being a distraction, even under full load during extended transfers or media rendering sessions.

Terramaster D4 SSD Review – Internal Hardware

Inside the Terramaster D4 SSD, the hardware is built around a dedicated USB4 bridge controller, the ASMedia ASM2464PDX, which is designed to maintain high throughput across multiple NVMe drives without the lane bottleneck issues found in some lower-cost enclosures. Each M.2 slot is wired for PCIe Gen4 x1 bandwidth, providing up to 2,000MB/s potential per drive, which is then aggregated and managed through the USB4 interface.

This design ensures predictable scaling in both single-drive and multi-drive use, with performance closely tied to the host system’s RAID or file management configuration. The PCB is perforated in multiple areas to enhance passive airflow in conjunction with the active cooling fans, helping to maintain SSD performance during sustained workloads such as large file transfers or continuous video editing.

The storage slots themselves support PCIe NVMe M.2 2280 SSDs, making the D4 SSD compatible with a wide range of consumer and professional-grade drives. While the official capacity limit is listed as 8TB per drive, the enclosure is not restricted by proprietary firmware, allowing for potential support of larger modules as they become available. The absence of hardware RAID keeps internal processing simple, reducing latency and power draw, while allowing the enclosure to work equally well in macOS, Windows, and certain NAS expansion scenarios where the RAID logic is handled externally. Additionally, the enclosure supports multiple file systems including NTFS, APFS, exFAT, FAT32, and EXT4, depending on the host environment.

Power delivery to the enclosure is handled through a 24W external adapter, with a wide input voltage range of 12V to 20V for compatibility with common laptop and mini-PC power supplies. This not only makes it more versatile for travel or integration into mobile production setups but also reduces the need for proprietary adapters.

The included USB4 Type-C cable is 0.8m in length and rated for up to 80Gbps, significantly higher than the device’s 40Gbps requirement, ensuring minimal signal degradation over time. Thermal and power management are monitored by four internal sensors, which regulate the fan speeds to balance cooling and noise.

Terramaster D4 SSD Review – Connectivity

The Terramaster D4 SSD keeps its external connectivity simple, focusing on delivering the highest possible throughput over a single interface. The primary connection is a USB4 Type-C port located on the rear of the unit, providing up to 40Gbps of bandwidth when used with a compatible host device. This interface also ensures backward compatibility with Thunderbolt 3, Thunderbolt 4, Thunderbolt 5, and USB 3.x standards, although maximum speeds will vary depending on the protocol supported by the connected system. This approach makes the D4 SSD suitable for a wide range of setups, from modern Mac computers and high-end Windows workstations to certain NAS devices that offer USB4 or Thunderbolt connectivity for expansion.

The unit does not draw power from the USB4 connection, which is essential given the requirements of running four NVMe drives under load. This separation ensures stable power delivery regardless of the workload, preventing thermal throttling or performance drops caused by insufficient bus power.

The only other physical interface elements are the cooling ventilation openings, the power button, and status indicators. The ventilation is positioned to support the enclosure’s top-to-bottom airflow, with exhaust positioned to avoid heat recirculation. The power button is recessed to prevent accidental shutdowns, and the indicator lights provide a quick visual status of drive activity. While the D4 SSD avoids additional ports such as USB hubs or SD card readers, this streamlined design prioritises stability and speed for storage operations, aligning with its role as a dedicated high-bandwidth storage enclosure rather than a multifunction docking station.

Terramaster D4 SSD Review – Performance and Tests

In practical testing, the Terramaster D4 SSD demonstrated performance levels consistent with the capabilities of its USB4 interface and internal PCIe lane allocation. When fitted with a single PCIe Gen4 NVMe SSD and connected to a compatible Windows host system, sequential transfer rates reached around 1,480MB/s for reads and 1,140MB/s for writes in CrystalDiskMark, with mixed 70/30 read/write workloads averaging 1,286MB/s.

AJA System Test results with a repeated 1GB file showed roughly 1,400MB/s read and 1,300MB/s write, while ATTO Disk Benchmark recorded peaks of 1.57GB/s read and up to 1.5GB/s write.

These results represent roughly three-quarters of the theoretical maximum per-lane Gen4 x1 performance, with minor variations attributable to SSD model and host configuration.

With four SSDs installed and configured in RAID 0 via Windows Disk Management, throughput scaled significantly.

In AJA testing, read speeds reached 2,500MB/s and writes 2,300MB/s. CrystalDiskMark produced 2,047MB/s reads and 1,927MB/s writes in sequential tests, with mixed workloads at around 1,799MB/s.

ATTO testing peaked at approximately 2.93GB/s read and 2.66GB/s write. These figures are below the absolute maximum possible for USB4 but remain strong for a host-managed RAID array without dedicated hardware acceleration.

The results indicate that with a more capable RAID implementation, sustained speeds above 3GB/s would be achievable, making the D4 SSD suitable for high-bandwidth applications such as multi-stream 4K or 6K video editing. Thermal performance was another key testing area given the high-speed NVMe drives involved. Under sustained load with all four SSDs active, the enclosure’s dual-fan cooling system maintained stable operating temperatures without noticeable thermal throttling. Noise output, even at maximum fan speed, remained low enough for close-proximity use in an editing suite or home office. The absence of included NVMe heatsinks did not lead to significant overheating in tests, though installing aftermarket heatsinks could be beneficial for prolonged heavy workloads or in warmer environments.

Power consumption measurements showed efficient operation relative to its performance. With all drives in hibernation, draw was close to 1W; in standby, it was 3–4W; and at full load, the system used only 5–6W. This efficiency, combined with the wide voltage input support, makes the D4 SSD practical for mobile production setups and continuous desktop use without significant power overhead. Compatibility was confirmed across both macOS and Windows systems, with macOS tests achieving up to 3,257MB/s reads and 3,192MB/s writes using four Samsung 990 PRO 4TB SSDs in RAID 0 on a Mac mini with an Apple M4 chip.

Terramaster D4 SSD Review – Verdict and Conclusion

The Terramaster D4 SSD positions itself as a compact, high-speed, and flexible all-flash enclosure for users who require consistent bandwidth and expandable capacity over USB4. Its PCIe Gen4 x1 lane allocation per drive, paired with the ASMedia ASM2464PDX controller, ensures that performance scales predictably from single-drive use to fully populated configurations without the bottlenecks common in lower-end enclosures that multiplex lanes. While the absence of built-in hardware RAID will be seen as a limitation for users wanting an all-in-one solution, the decision to leave RAID management to the host system helps keep the enclosure’s design simpler, power consumption lower, and thermal output under better control. This host-managed approach also allows greater flexibility in choosing software RAID solutions optimised for specific workflows, whether for performance (RAID 0), redundancy (RAID 1), or other advanced configurations. Combined with its small footprint, professional-grade cooling, and wide voltage input range, the D4 SSD fits naturally into both fixed and mobile setups where reliable sustained throughput is essential.

From a value and application standpoint, the D4 SSD’s test results put it among the faster multi-bay USB4 NVMe enclosures currently available, especially given its ability to sustain multi-gigabyte transfers under prolonged load without thermal throttling. It is particularly well-suited to professionals in media production, post-processing, and high-resolution video editing who need large, portable, and quiet storage capable of handling multiple uncompressed video streams in real time. The unit’s quiet operation, even when all drives are active, makes it practical for use in audio-sensitive environments, and its compatibility with Thunderbolt 3, 4, and 5 as well as USB 3.x protocols expands its usability across a wide variety of systems. Potential buyers should, however, factor in the additional cost of populating all four slots with high-capacity NVMe SSDs and consider adding aftermarket heatsinks for continuous heavy workloads, as none are included. For those who already operate in environments where RAID is managed externally or within the operating system, the D4 SSD represents a balanced combination of speed, efficiency, and build quality that should appeal to both Windows and macOS professionals seeking long-term, high-performance storage expansion.

Join Inner Circle

Want to follow specific category? Also Read...Week 34 Tech Roundup – UnraiWeek 33 Tech Roundup – TerraTerramaster D1 SSD ReviewTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewTerramaster F4 SSD NAS ReviewTerramaster F4 SSD NAS ReviewTerramaster Prime Day 2025 - ATerramaster Prime Day 2025 - ASynology vs Terramaster NAS - Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

 Synology DS425+ Review – Should You Buy This NAS?

The Synology DS425+ is a 4-bay NAS system launched in mid-2025 as part of the company’s continued refresh of its Plus Series product line, replacing the DS423+. It is designed to serve home power users, creative professionals, and small business environments that require a balance of reliable storage, streamlined software integration, and modest multimedia capabilities. The unit retains a familiar chassis and architecture, featuring the Intel Celeron J4125 quad-core processor (2.0 GHz base, 2.7 GHz burst) with integrated graphics support, 2GB of soldered DDR4 memory (expandable up to 6GB with an additional 4GB Synology module), and two M.2 NVMe slots intended primarily for SSD caching using Synology-verified drives.

Alongside this hardware, the DS425+ runs DSM 7.2 and includes the full suite of Synology services, such as Active Backup, Surveillance Station, Virtual Machine Manager, Synology Drive, and Hybrid RAID (SHR) support. Network connectivity is handled by a single 2.5GbE and a 1GbE port, while two USB 3.2 Gen 1 ports enable external storage or UPS integration. Despite minimal hardware changes over its predecessor, the DS425+ demonstrates Synology’s continued focus on efficiency, low noise output, and energy-conscious operation—important factors for users planning to run a 24/7 NAS. However, these choices also reflect broader changes in Synology’s platform strategy that may not suit every user, especially those seeking higher flexibility or modern internal specifications.

SOFTWARE - 10/10

HARDWARE - 4/10

PERFORMANCE - 6/10

PRICE - 6/10

VALUE - 7/10

6.6

PROS

DSM 7.2 Operating System: Offers a rich suite of first-party apps including Active Backup, Surveillance Station, Synology Drive, and Hyper Backup with strong cross-platform support.
Low Noise and Power Consumption: Quiet 92mm fan setup and efficient power usage (~28W under load) make it ideal for 24/7 operation in home or office environments.
Integrated Graphics (Intel UHD 600): Supports light Plex or Jellyfin hardware transcoding for 1080p media, a rare inclusion in Synology’s 2025 lineup.
Compact and Versatile Design: Small chassis with 4 SATA bays and 2 M.2 NVMe slots for cache acceleration, supporting RAID 5/6 and SHR.
Strong Security Posture: Includes 2FA, SSL, VPN tools, and a proactive PSIRT vulnerability disclosure program for ongoing protection.
Good Thermal Management: Maintains stable drive and system temperatures (~32–35°C) even under moderate load.
Broad Software Ecosystem: Additional apps like Synology Photos, Chat, Office, and Drive make it a multi-functional NAS beyond just storage.

CONS

Strict Drive Compatibility: Requires Synology-only HDDs and SSDs for full functionality; third-party drives trigger warnings or are blocked entirely.
Outdated CPU Platform: Uses a 2019-era Intel J4125 CPU, now underpowered compared to newer Intel N-series or AMD embedded chips.
Memory Upgrade Limitations: Comes with 2GB soldered RAM, upgradeable to only 6GB total, and officially supports Synology-branded memory only.
Limited Connectivity and I/O: No PCIe, eSATA, or SD card support; only one 2.5GbE and two 5Gbps USB ports—lagging behind competitors in 2025.

Where to Buy a Product
			VISIT RETAILER ➤
			VISIT RETAILER ➤

DSM Software Ecosystem and Integration

One of the most compelling reasons to consider the DS425+ is its support for Synology’s DiskStation Manager (DSM), a mature and highly integrated NAS operating system. DSM 7.2, which comes preinstalled, offers a unified and consistent user experience with a wide range of built-in applications tailored for home users, remote workers, and small office setups. Core tools like Active Backup for Business allow centralized backup of entire operating systems, folders, and virtual machines, making the DS425+ useful as a bare-metal recovery or disaster recovery node. Hyper Backup enables encrypted, versioned backups to local, remote, or cloud destinations, while tools like Snapshot Replication provide rapid rollbacks and protection against ransomware.

Synology also offers sector-specific solutions through packages like Surveillance Station and Virtual Machine Manager, the former allowing support for up to 40 cameras (with up to 800FPS at 1080p H.264), and the latter providing basic VM hosting for Linux and lightweight Windows workloads. These tools are tightly optimized for the hardware, with low overhead and accessible browser-based management. Furthermore, the DS425+ supports Synology Hybrid RAID (SHR), giving users more flexibility when mixing drive capacities and minimizing unused storage space compared to traditional RAID models.

DSM extends beyond simple storage management by including companion apps like Synology Photos, Drive, and Chat, all of which are compatible with Windows, macOS, Android, and iOS. The DS425+ integrates these tools with centralized user management, group permissions, and support for LDAP and Active Directory.

For users who value reliability, Synology’s proactive security strategy—including its public security advisories, pen-testing initiatives, and in-house incident response—adds extra confidence to the long-term stability and safety of the system. In many cases, users report that the simplicity and polish of DSM is what keeps them loyal to the Synology platform, even when hardware specifications appear modest.

Strict Drive Compatibility and Locked Storage Expansion

One of the most significant limitations of the DS425+ is its strict enforcement of Synology-only drive compatibility, particularly for both 3.5″ HDDs and M.2 NVMe SSDs. As of mid-2025, this model only allows full functionality when paired with Synology-branded drives, such as the HAT5300 series for hard disks or SNV3410/3510 for SSDs.

If users attempt to install non-Synology drives—even widely used options like Seagate IronWolf or WD Red—the system will either block the drives entirely or present warnings and restrict key functionality, such as RAID rebuild, hot spare assignment, or expansion. This policy represents a significant departure from Synology’s historically broader compatibility stance and has become a source of ongoing controversy among users and reviewers alike.

From a practical standpoint, this limitation can result in higher upfront costs, reduced flexibility in sourcing drives, and long-term concerns about availability and vendor lock-in. For example, Synology’s high-capacity enterprise HDDs are often difficult to find in retail channels and may be priced at a premium compared to similar offerings from Seagate or Toshiba.

Users migrating from older Synology systems who want to reuse perfectly functional drives may find themselves unable to do so, as the new system won’t allow proper array recovery or expansion unless all drives meet the strict compatibility criteria. While this approach enables Synology to tightly optimize performance and reliability, it effectively turns the DS425+ into a semi-proprietary ecosystem where even core storage components are vendor-restricted.

This is particularly frustrating for experienced NAS users who expect to mix and match drives or who run environments where hardware recycling and drive lifecycle management are critical. The decision also impacts future-proofing: users who want to grow their arrays over time must now ensure drive stock alignment with Synology’s approved list, which may change over time or vary by region. Despite DSM’s strengths, this hard stance on compatibility significantly undermines one of the key selling points of NAS platforms—modularity—and could be a dealbreaker for value-conscious users or those with existing disk investments.

Low Noise and Power Efficiency for 24/7 Use

Another advantage of the DS425+ lies in its energy-efficient and acoustically quiet design, which makes it highly suitable for constant operation in homes, studios, or office environments where noise and heat are critical considerations. Based on extended testing, the system consumes just 28.25W under access load and drops to as low as 6.10W in HDD hibernation, making it one of the more economical NAS units in its class when measured over long-term 24/7 usage.

Even when populated with four 4TB hard drives and placed under sustained load, real-world power draw rarely exceeded 44W during high CPU utilization. This is further aided by the relatively low thermal output, with ambient casing temperatures measured around 32°C and drive bays stabilizing at just 35°C under load.

In terms of acoustic performance, the DS425+ is equipped with two 92mm fans, and noise testing shows the system remains quiet enough for close-proximity deployment. In idle mode with the fans on their lowest profile, it registers a sound level between 36 to 38 dB(A), which increases only moderately under load or at medium fan speed. Even when the system was manually set to full fan speed with high drive activity, noise output peaked at 53 dB(A)—still manageable for most non-silent workspaces. This operational profile makes the DS425+ appealing to users seeking a low-maintenance NAS that can be discreetly placed in a shared room, office, or AV rack without introducing unwanted distraction or thermal buildup.

This power and noise behavior also helps prolong component lifespan, particularly in warmer climates or enclosed cabinets, and supports use cases like 24/7 media server operation, offsite backups, or even small-scale CCTV archiving. Importantly, despite these low operating figures, the DS425+ still maintains stability and consistent throughput thanks to the efficiency of the J4125 processor and DSM’s power-aware service management. These characteristics, often underappreciated in specs alone, make it especially suitable for those who want reliable long-term uptime without high energy costs or acoustic interference.

Memory Limitations and Unorthodox Upgrade Path

The DS425+ comes with 2GB of DDR4 memory soldered directly to the motherboard, which is low by 2025 standards even for entry-level NAS devices. While it includes an additional memory slot that allows for the installation of a single 4GB module, the system officially supports a maximum of just 6GB of total RAM. This is an unusual and restrictive configuration, especially when many modern NAS devices now ship with 4GB or 8GB by default, and support 16GB or more—sometimes with dual-channel configurations for better performance. Synology’s strict validation policy also means that only their branded RAM (e.g. D4NESO-2666-4G) is fully supported, and installing third-party modules can trigger warnings in DSM or potentially void support coverage.

This memory ceiling becomes problematic when running DSM features that scale with RAM usage, such as Synology Drive, Snapshot Replication, Virtual Machine Manager, or Surveillance Station. As observed during testing, the DS425+ routinely used 27–38% of its available memory at idle, even without third-party packages installed. This is largely due to DSM’s intelligent memory caching system, which improves performance but leaves little headroom for user-defined workloads. Once additional services or multimedia indexing tasks are introduced, memory utilization climbs quickly, increasing the risk of slowdowns, swap usage, or outright service failure under peak demand.

For users who intend to deploy containers, host multiple camera feeds, or run even a small number of VMs, this limitation may lead to bottlenecks sooner than expected. It also makes the DS425+ a less viable choice for future expansion or multi-user environments. Unlike other NAS brands that allow full third-party upgrade freedom—or systems with dual RAM slots and broader capacity support—Synology’s enforced limitations here represent another example of the platform’s increasingly locked-down approach. For a system marketed to prosumers, the inability to exceed 6GB RAM comfortably is a notable technical and strategic constraint.

Integrated Graphics for Light Media Transcoding

Unlike many NAS units in this price tier, the DS425+ includes an Intel Celeron J4125 processor with integrated Intel UHD Graphics 600, which unlocks hardware-accelerated video decoding and transcoding in supported applications like Plex or Jellyfin. This makes the DS425+ one of the few Synology models in 2025 that still offers integrated GPU support out of the box, especially as newer Synology models with more recent CPUs have increasingly omitted integrated graphics. While the DS425+ is not intended to replace a dedicated media server, its GPU can significantly improve performance and efficiency for on-the-fly transcoding of formats like H.264 and H.265 (HEVC), particularly when streaming to remote clients with bandwidth constraints.

In real-world usage scenarios, this means the DS425+ can handle direct streaming and limited transcoding of 1080p content without overwhelming the CPU, provided the source formats are within the GPU’s supported codec list. During Plex testing, the DS425+ performed adequately with one or two 1080p transcodes running simultaneously, and was also able to manage basic 4K downscaling if the codec was natively supported by the hardware. For home users who have mixed devices—such as smart TVs, mobile devices, and tablets that vary in codec support—the presence of hardware transcoding offers improved flexibility without requiring as much manual conversion or format standardization of their media library.

Additionally, Synology’s native multimedia applications such as Surveillance Station and Synology Photos also benefit from GPU acceleration, helping speed up thumbnail generation, indexing, and playback, especially for high-resolution image and video collections. While raw CPU power in the DS425+ is modest by 2025 standards, the inclusion of integrated graphics helps balance out performance for lightweight graphical workloads and makes the system more viable as a general-purpose media hub. For users considering a NAS for Plex, family media streaming, or small business content previews, this capability adds meaningful value—especially since few modern Synology NAS devices still include Intel-based chips with iGPU support.

Outdated CPU Platform and Limited Performance Headroom

The DS425+ ships with the Intel Celeron J4125, a 4-core, 4-thread processor that was originally launched in late 2019. While it offers modest performance and includes integrated graphics, the J4125 is now significantly behind modern alternatives in both efficiency and raw compute power. Intel itself has discontinued the Celeron branding entirely, moving toward newer architectures like Alder Lake-N and Jasper Lake, which offer improved IPC (instructions per cycle), higher core/thread counts, and better thermal efficiency—all while retaining low power consumption. In comparison, the J4125’s aging 14nm Gemini Lake architecture struggles with heavier multitasking, especially when running services like virtual machines, surveillance workloads, or multiple Docker containers in parallel.

Synology has retained this CPU across several generations of its 2- and 4-bay Plus series models, which makes the DS425+ feel less like a generational upgrade and more like a lateral move. During performance testing, the unit handled DSM core tasks and multimedia indexing smoothly, but CPU load increased sharply under heavier tasks such as simultaneous Surveillance Station streams, Hyper Backup routines, or basic VM instances.

This limited headroom constrains the DS425+ to light-to-moderate workloads, and it can bottleneck more quickly than newer systems from other brands using more recent Intel N-series or AMD Ryzen Embedded CPUs. This is especially important as DSM continues to add new features that may increase background resource consumption over time.

Additionally, the CPU’s lack of support for modern instruction sets or features like AVX can limit compatibility with certain Docker containers or third-party applications that expect more recent hardware. While the DS425+ can serve well as a general-purpose file server or light media NAS, it’s not suited for users who anticipate growth into heavier mixed-use deployments. In a 2025 market where many similarly priced NAS units offer 6- or 8-core CPUs and PCIe Gen 3 or 4 support, the DS425+ feels constrained and unlikely to age well for users with evolving or expanding workloads.

Compact Form Factor with Versatile Storage Options

The DS425+ offers a space-efficient chassis design that houses four 3.5″/2.5″ SATA drive bays, along with two M.2 2280 NVMe SSD slots for caching. This provides a versatile platform for users who want flexible storage layouts without moving to a physically larger or more expensive rackmount or tower system.

The vertical orientation of the chassis, measuring just 166 x 199 x 223 mm, makes it easy to deploy the device in tight workspaces, shelving units, or beneath desks—ideal for small offices, home studios, or AV setups where space is at a premium. Despite its small footprint, the device retains full support for key RAID configurations including SHR, RAID 5/6/10, and JBOD, and offers hot-swappable access to the main drive bays for ease of maintenance.

The inclusion of two M.2 NVMe slots on the base of the unit allows users to improve performance through read/write caching without sacrificing primary drive bays. Although these M.2 slots are limited to Synology-verified SSDs and are not usable for storage pools, they can still offer significant boosts to random I/O performance in multi-user environments or when used with demanding workloads like Synology Drive or VM hosting. Combined with support for SSD TRIM and smart cache algorithms within DSM, the system can be tuned to optimize response times during high-access periods without introducing large amounts of memory overhead.

From a practical standpoint, this layout is beneficial for users managing multiple storage tiers, such as a mix of large-capacity HDDs for archiving and faster SSDs for active projects or virtual machines. Furthermore, the DS425+ supports volume expansion using larger capacity drives, RAID migration options (e.g. from Basic to RAID 5 or RAID 5 to RAID 6), and up to 32 internal volumes, giving users enough headroom for future scaling. These features, while standard in DSM, are fully supported in this chassis and make it easier to adapt the NAS as storage needs evolve—without the need to start from scratch or invest in a new enclosure.

Limited I/O and Underwhelming Connectivity for the Price

While the DS425+ introduces a 2.5GbE network port alongside a legacy 1GbE port, the rest of its I/O configuration is relatively limited and arguably outdated compared to competitors in its price range. The system includes just two USB 3.2 Gen 1 ports, both of which operate at 5Gbps rather than the more modern 10Gbps (Gen 2) speeds that are increasingly common in 2025. There is no SD card slot, no eSATA or PCIe expansion slot, and no HDMI output, all of which are features now appearing on rival NAS systems from QNAP, TerraMaster, and UGREEN—even at similar or lower price points. These omissions restrict how the device can be expanded or integrated into more complex workflows, such as direct-attached backup targets, external GPU support, or quick media ingestion.

The presence of only a single 2.5GbE port also imposes a bottleneck for users wanting to make full use of SSD caching or high-throughput RAID configurations. There is no support for link aggregation, as the 1GbE and 2.5GbE ports cannot be bonded in a meaningful way, and the system lacks support for 5GbE or 10GbE—either onboard or via expansion. In scenarios where large video files, virtual machine images, or multiple users are simultaneously accessing data, the NAS may become network-bound more quickly than other models with multi-GbE or SFP+ connectivity.

Furthermore, while DSM offers support for USB peripherals such as external drives and UPS devices, the limited port count and bandwidth mean there is little headroom for simultaneous external expansions, and the brand limits the support of USB peripherals for security reasons. For example, attaching both an external drive and a USB-connected UPS may require unplugging one to rotate in another device. This may not impact casual home users, but for power users managing workflows like video editing, offsite rotation backups, or multi-location file sync, this level of I/O flexibility feels dated. When factoring in the DS425+’s pricing, which places it near many NAS models with more expansive I/O, this minimalism can be a significant drawback.

Strong Security Framework and Proactive Vulnerability Management

The DS425+ benefits from Synology’s broader emphasis on security, offering a robust framework for data protection, secure remote access, and proactive threat mitigation. DSM includes built-in tools such as firewall rules, auto-blocking of suspicious IPs, HTTPS configuration, and native integration with Let’s Encrypt for SSL certificates. Two-factor authentication (2FA) can be enforced per user or globally, and built-in VPN server options (including OpenVPN and L2TP/IPSec) provide secure tunnels for remote workers or offsite access. For businesses or power users hosting sensitive data, the inclusion of AES-NI hardware encryption ensures efficient at-rest protection without drastically impacting system performance.

What sets Synology apart is its ongoing commitment to security research and response. The company operates a public-facing Product Security Incident Response Team (PSIRT) and regularly updates a detailed security advisory page disclosing vulnerabilities and their mitigations. Synology also participates in Pwn2Own, a white-hat hacking competition, and runs internal bug bounty programs to uncover and patch exploits before they are discovered in the wild. This culture of transparency and preemptive action is especially valuable as NAS devices become more frequently targeted by malware and ransomware threats, particularly those exposed to the internet or used in hybrid cloud workflows.

Additionally, many DSM apps include granular permission management, audit logs, and user-based access rules, giving administrators tight control over file shares, backup targets, and service access. Synology’s Hybrid Share and Cloud Sync tools support end-to-end encryption and offer options to decouple cloud storage keys from the local system, further strengthening data sovereignty. For users concerned with long-term viability and platform trust, Synology’s structured and well-documented security practices help the DS425+ stand out against competitors that may offer more hardware but less attention to software and infrastructure hardening. This makes it a viable choice for users prioritizing data safety in either personal or professional contexts.

Questionable Long-Term Value Amid Shifting Synology Strategy

Another concern with the DS425+ is its position within Synology’s evolving product strategy, which raises questions about long-term support and ecosystem focus. Synology has recently been expanding its BeeStation and BeeStation Plus lines—pre-populated, user-friendly NAS solutions that share similar hardware (in some cases, the same J4125 CPU), but are bundled with drives and offer a simplified DSM variant tailored for general consumers. These systems, while more limited in scope, are marketed as turnkey alternatives with lower pricing and fewer user-configurable components. The DS425+, by contrast, sits awkwardly between Synology’s increasingly restrictive hardware requirements and the emerging shift toward closed, fully managed platforms.

This change in trajectory creates uncertainty for prospective buyers looking for a long-term investment. If Synology continues prioritizing its proprietary hardware and software pairings, users who prefer modularity, drive freedom, or advanced customization may find themselves increasingly constrained. As already noted, the DS425+ enforces tight compatibility rules, limits memory expansion, and restricts NVMe usage to caching only. At the same time, Synology is streamlining its portfolio around devices with even stricter limitations but more mass-market appeal. This raises the possibility that traditional “Plus” models like the DS425+ may be sidelined or see fewer feature updates in future DSM releases, as Synology shifts development toward more controlled environments.

From a cost perspective, the DS425+ is priced around $519, placing it uncomfortably close to more powerful third-party NAS systems that offer better CPUs, more RAM, and greater I/O flexibility. Competing brands frequently offer 4-bay systems with modern N-series Intel processors or embedded AMD chips, 8GB+ of memory, and faster networking, often for the same or lower price. As a result, the DS425+ risks being outclassed not only by its competition, but by Synology’s own growing lineup of prepackaged solutions. Users investing in the DS425+ today may find themselves limited not just by current specs, but by an ecosystem slowly drifting away from the prosumer and enthusiast segment this model was originally meant to serve.

Synology DS425+ NAS Review – Conclusion and Verdict

The Synology DS425+ presents a mixed proposition in 2025. On one hand, it remains a competent 4-bay NAS solution for users prioritizing software integration, low power operation, and quiet, reliable 24/7 usage. Its support for DSM 7.2 and the full suite of Synology applications—ranging from Active Backup to Surveillance Station and Synology Drive—makes it a strong turnkey platform for general-purpose storage, backup, and multimedia needs. Integrated graphics give it an edge in light media streaming scenarios, and its support for M.2 NVMe caching allows for performance optimization without occupying drive bays. It’s a well-built device that continues to “just work,” particularly in home and small office setups where reliability, simplicity, and refined software matter more than raw horsepower.

However, these strengths are increasingly offset by hardware limitations and Synology’s increasingly restrictive ecosystem. The soldered 2GB of RAM, locked 6GB memory ceiling, outdated CPU, limited I/O, and especially the enforced use of Synology-only drives all hinder flexibility and long-term value. When compared to similarly priced alternatives from competing NAS vendors—many of which offer newer processors, faster ports, and full hardware freedom—the DS425+ can feel constrained and overpriced. In addition, Synology’s expanding focus on pre-populated BeeStation devices suggests a possible shift away from traditional DIY-friendly models like this one. For users who are already invested in the Synology ecosystem or who value DSM above all else, the DS425+ may still be a worthwhile buy. But for those seeking hardware scalability, third-party compatibility, or better price-to-performance, it may be worth considering other options or waiting to see how Synology’s roadmap evolves.

Join Inner Circle

Want to follow specific category? Also Read...GL.iNet Comet Pro Review - TheGL.iNet Comet Pro ReviewWeek 33 Tech Roundup – TerraTerramaster D1 SSD ReviewTerramaster D4 SSD USB4 Box ReTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewSynology AI Console ReviewSynology AI Console Review - GDS1825+ vs DXP8800 PLUS NAS - Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

GMKTec G9 NAS (New Improved Cooling Version) Review

Important – My original review of the GMKTec G9 NAS in it’s original design can be found HERE on YouTube and HERE on the NASCompares blog.

The GMKTec G9 NucBox NAS has re-emerged in mid-2025 with a revised cooling design, following a wave of thermal criticism directed at the original release earlier in the year. Still marketed as an SSD-only NAS aimed at home and small office environments, the G9 maintains its core identity—a compact enclosure powered by Intel’s N150 quad-core processor, soldered LPDDR5 memory, and four M.2 NVMe SSD bays. The G9’s primary appeal continues to be its affordability, silent operation, and dual-use flexibility as both a NAS and lightweight desktop system, thanks to the inclusion of Windows 11 Pro and Ubuntu out of the box. However, early buyers and reviewers, including this channel, highlighted persistent thermal issues affecting SSD performance and overall system reliability under load, leading to thermal throttling even during idle states in warmer environments.

In response, GMKTec has issued an updated version of the G9 that retains the same form factor, internal hardware, and I/O but incorporates enhanced passive ventilation on the side and top panels. Though subtle at first glance, these structural changes are designed to improve airflow over the CPU and SSD compartments without increasing noise levels or power draw. In this updated review, we will revisit all aspects of the G9’s design, connectivity, and system behaviour under continuous load, while highlighting what exactly has changed and what remains untouched. The new G9 model introduces targeted thermal improvements, but beyond ventilation, it leaves the original architecture and feature set entirely intact.

GMKTec G9 Ver.2 NAS Review – Quick Conclusion

The improved GMKTec G9 NAS represents a targeted refinement rather than a full redesign, addressing the primary weakness of the original model: inadequate thermal performance. The updated version introduces enlarged ventilation cutouts on the top panel above the CPU fan and replaces the pinhole rear exhaust with a wider mesh, leading to measurable but modest reductions in system temperatures. In 48-hour test scenarios using UnRAID with hourly backup tasks, SSDs without heatsinks in the original unit reached idle temperatures of 66–67°C, while the revised model brought this down to 56–57°C. CPU vent temperatures similarly dropped from 54–56°C to 50–52°C, and rear I/O areas cooled by 5–7°C. These improvements enhance stability during sustained I/O activity but do not eliminate the need for additional SSD cooling—particularly in environments where ambient heat or multi-user access is expected. Internally, the hardware remains unchanged: Intel N150 CPU, 12GB of non-upgradable LPDDR5 memory, four PCIe Gen 3 x2 M.2 NVMe bays, and dual 2.5GbE ports, with storage and network throughput consistent with entry-level expectations. Power consumption remains efficient (19–30W), and noise levels stay low at under 40dB, making it suitable for always-on deployment. However, the continued use of a plastic chassis and base panel still limits effective heat dissipation, and the absence of thermal sensors or fan curve controls further limits its thermal adaptability. Compared to the Xyber Hydra—featuring a metal base, better SSD thermal contact, and 16GB RAM—the G9 now performs better than before but still falls short of what its hardware could achieve with more thoughtful engineering. For users willing to invest in SSD heatsinks and mindful of its limitations, the G9 is now a reasonably balanced entry NAS, though not the strongest performer in its tier.

BUILD QUALITY - 6/10

HARDWARE - 7/10

PERFORMANCE - 6/10

PRICE - 10/10

VALUE - 9/10

7.6

PROS

Affordable price point for a 4-bay NVMe NAS with dual 2.5GbE (typically under $200).
Support for up to 32TB of SSD storage across four M.2 NVMe slots.
Low power consumption (19W idle, ~30W under load) suitable for 24/7 operation.
Improved passive airflow design compared to the original model (lower overall temps).
Dual USB-C power input options for flexible cable management.
Silent operation, even during sustained activity (under 40dB).
Pre-installed OS (Windows 11 Pro and Ubuntu) allows for flexible initial use.
Compact, space-saving enclosure ideal for desktop setups or constrained environments.

CONS

Cooling Improvements are relatively small and No bundled SSD heatsinks, making thermal throttling likely without aftermarket cooling.
Non-upgradable 12GB LPDDR5 RAM limits scalability for heavier workloads.
Plastic chassis and base panel still hinder full thermal dissipation from SSDs.
The Introduction of other NAS such as the Beelink ME Mini and Xyber Hydra has provided appealing alternatives to this device right now

GMKTec G9 Ver.2 NAS Review – Design and Storage

The GMKTec G9 continues to use a compact, matte-black plastic chassis that is closer in design to a mini PC enclosure than a traditional NAS. The vertical design conserves desk space, and the front-facing panel remains clean and understated, with no visible drive trays or status indicators beyond the power button and basic branding. As with the original model, the chassis sacrifices the durability and thermal advantages of metal in favour of a lightweight, cost-efficient build. This makes the device appealing for users with space constraints, but it also signals the system’s budget positioning. The plastic enclosure, while solid enough for day-to-day use, is not especially resistant to heat buildup during sustained I/O operations, which remains one of its most persistent limitations.

Internally, the system supports four M.2 NVMe SSDs, each connected via PCIe Gen 3 x2 lanes. This setup allows up to 32TB of total SSD storage, assuming the use of high-capacity 8TB NVMe drives. The use of SSDs rather than traditional 2.5″ or 3.5″ hard drives enables near-silent operation, faster access times, and lower power consumption. However, SSD-only NAS designs like this one typically require better airflow and heatsinking to mitigate thermal throttling—especially during RAID operations or when used as a media server with multiple concurrent reads and writes. The G9 supports basic RAID via third-party NAS OSs, but due to PCIe lane limitations and lack of onboard RAID management, advanced configurations will rely entirely on software.

One of the primary complaints in the original model was the absence of SSD heatsinks and the system’s poor natural heat dissipation. While pre-built units from GMKTec occasionally shipped with low-profile aluminum heatsinks, user-added drives often ran hot, especially under sustained write loads. The M.2 slots sit stacked vertically inside a cramped compartment behind the lower rear panel, and when combined with a sealed plastic baseplate, heat quickly accumulates. This design still persists in the new version, and although airflow has been improved through the external vents, the interior thermal behaviour remains heavily dependent on user-supplied heatsinks and ambient cooling conditions. Users deploying high-endurance SSDs or running frequent write-intensive tasks will need to factor this into their thermal strategy.

The internal layout is efficient but fixed. There are no modular trays or hot-swap capabilities for the SSDs, and all upgrades must be performed by opening the device. Memory is soldered and therefore non-upgradable, and while there’s internal eMMC storage used for the pre-installed OS, most users will opt to install TrueNAS, UnRAID, or OpenMediaVault onto one of the NVMe drives for full NAS functionality. The passive cooling approach is unchanged in its core design: two internal fans (one for CPU, one system) move air through the case, but without direct thermal contact to the SSDs or a conductive enclosure material, this airflow has limited reach. Placement of the unit in a well-ventilated space remains essential.

The only real physical design changes in the new version are to the external ventilation panels. GMKTec has replaced the original pinhole-style vent on the rear side with a wider mesh grille, which now spans a greater portion of the side panel. Additionally, the top panel has been revised to include a broader cutout directly above the CPU fan, allowing a clearer exhaust path for rising hot air. However, the plastic base and internal heat chamber structure remain unchanged, meaning SSD temperatures are still a potential concern—especially without aftermarket cooling. The updated G9 retains the same core storage architecture as the original, but introduces modest improvements to airflow via enhanced external ventilation.

GMKTec G9 Ver.2 NAS Review – Internal Hardware

At the center of the GMKTec G9 is the Intel N150 processor, a quad-core, four-thread CPU built on the 10nm Twice Lake architecture. Designed for ultra-efficient computing, it operates at a modest 6W TDP, making it ideal for passive or semi-passive cooling environments like compact NAS systems. The N150 runs at a 1.0GHz base frequency and boosts up to 3.6GHz under load, delivering just enough headroom for tasks like SMB/NFS sharing, low-volume web hosting, and basic media playback. Its integrated Intel UHD Graphics support up to 4K at 60Hz output via HDMI or USB-C DisplayPort alt mode, though without hardware acceleration for modern codecs like AV1, its suitability for on-the-fly transcoding is limited. The CPU also lacks advanced server-grade features like ECC memory support, SR-IOV, or high-bandwidth PCIe 4.0 lanes, which reflects its role in cost-conscious, entry-level applications.

The onboard 12GB of LPDDR5-4800 memory is soldered and cannot be replaced or upgraded, a design choice that simplifies manufacturing and keeps costs down but limits versatility in heavier multitasking scenarios. In practice, the memory is sufficient for running one or two lightweight NAS services alongside file sharing, or even a basic Docker container or two, but its soldered configuration leaves no room for future expansion. Notably, the memory is dual-channel, which does help offset some performance constraints—especially in scenarios where the integrated graphics or CPU requires memory bandwidth access. While most users won’t hit the ceiling of 12GB under standard NAS tasks, advanced setups involving active sync with cloud platforms, large-scale Plex libraries, or multiple concurrent rsync/FTP sessions could find the limitation restrictive. Also, unlike some similarly priced competitors, there’s no accessible BIOS option to reserve RAM for cache acceleration, which could have improved responsiveness under heavier I/O loads.

In terms of storage hardware, the G9 offers four M.2 NVMe slots with PCIe Gen 3 x2 interfaces, a configuration that supports up to 32TB of total storage using current consumer-grade drives. Each slot is keyed for M-Key NVMe SSDs and arranged vertically inside the enclosure, though installation requires unscrewing the rear panel and working within the confined internal cavity. The system’s internal PCIe lane distribution is handled through multiple ASMedia ASM1182e switch chips, which divide the CPU’s limited PCIe bandwidth across all four NVMe slots and the dual 2.5GbE interfaces. While the Gen 3 x2 interface is technically capable of 2GB/s per slot, real-world speeds are often lower during concurrent access due to the shared architecture.

This design also limits SSD passthrough capabilities in virtualized environments, and users aiming for high-speed SSD RAID configurations (RAID 5 or 10, for example) may encounter inconsistent write speeds. Additionally, there is no hardware-level thermal throttling safeguard tied to fan curves or SSD temperature sensors, so thermal build-up under load could directly affect sustained throughput unless active cooling measures are installed. The internal hardware of the improved GMKTec G9 remains completely unchanged from the original release—no CPU, RAM, SSD slot layout, or controller chip has been altered in the updated version.

GMKTec G9 Ver.2 NAS Review – Ports and Connections

The GMKTec G9 offers a well-rounded I/O configuration that reflects its hybrid role as both a compact NAS and lightweight desktop appliance. It features two 2.5GbE LAN ports, both of which are directly linked to the CPU via PCIe lanes and can be configured for link aggregation, failover, or isolated network segments. In real-world testing, these ports easily saturate their 312MB/s bandwidth under SMB and iSCSI workloads, making the G9 more capable than traditional Gigabit NAS units. The absence of 10GbE is notable, especially for users planning to deploy NVMe RAID arrays or work in content-heavy environments, but at this price point and power envelope, dual 2.5GbE is still a competitive offering. Notably, both NICs support Wake-on-LAN (WoL), making the system convenient for remote access or low-power automation setups.

For peripheral and expansion support, the G9 includes three USB-A 3.2 Gen 2 ports and a single USB-C 3.2 Gen 2 port, each capable of 10Gbps data transfer. The USB-C port also supports DisplayPort Alt Mode, allowing it to function as an additional video output alongside the two HDMI 2.0 ports on the rear panel. These HDMI ports support 4K resolution at 60Hz and are positioned for users who may wish to operate the G9 as a silent desktop system or a local media playback device via Kodi, Jellyfin, or Plex. However, the G9 does not include USB 4.0, Thunderbolt, or PCIe expandability, limiting options for future upgrades such as external GPUs, additional NICs, or DAS enclosures. In testing, connected peripherals such as USB drives and webcams were recognized instantly under Ubuntu and Windows, confirming basic plug-and-play compatibility.

Power delivery is handled via USB-C PD input, using a 65W external power brick that ships with the unit. Uniquely, the updated G9 introduces a small but notable change: dual USB-C power input points, allowing users to select which side of the device receives the power cable. This change doesn’t increase power capacity or enable redundancy, but it can improve cable management depending on the G9’s orientation on a desk or shelf. However, using one of the USB-C ports for power inherently sacrifices a high-speed data port—an unfortunate trade-off given the unit’s lack of PCIe or expansion bays. No dedicated power switch is present; the unit powers on via the front button or Wake-on-LAN and remains always-on unless shut down via software or OS-level scripts. Compared with the original G9, the only change to I/O is the addition of the second USB-C power input for layout flexibility—otherwise, all ports, speeds, and layout remain the same.

Port Type	Quantity	Specification
2.5GbE LAN	2	Realtek RTL8125, Link Aggregation Supported
USB-A 3.2 Gen 2	3	10Gbps, Backward Compatible
USB-C 3.2 Gen 2	1 (+1 PD)	10Gbps, DisplayPort Alt Mode
HDMI 2.0	2	4K @ 60Hz
Power Input (USB-C)	2	65W USB-C PD (Only 1 used at a time)
Wake-on-LAN	Supported	Both NICs
Audio	None	No 3.5mm jack or digital out

GMKTec G9 Ver.2 NAS Review – Tests and Performance

In synthetic and real-world benchmarks, the GMKTec G9 delivers the level of performance expected from an Intel N150 system with PCIe Gen 3 x2 storage. Read speeds per drive peaked around 1.4–1.5GB/s, aligning well with the theoretical limit of the x2 interface. Write speeds were notably more volatile, ranging between 400–600MB/s depending on SSD type, ambient temperature, and active processes. These numbers, while adequate for file serving, backups, and Docker apps, showed clear limitations when the system was pushed into simultaneous multi-disk writes or parity-based RAID configurations. The presence of ASMedia ASM1182e PCIe switches likely contributes to this variance, as downstream PCIe allocation under pressure introduces contention among the SSD lanes. In typical NAS tasks like SMB and NFS file transfers, however, performance remained consistent and stable, particularly when network activity was confined to single-user access or sequential transfers.

Thermal behaviour is where the most scrutiny falls, given the G9’s original design flaws. Under a controlled 48-hour test using UnRAID with scheduled hourly backups and mixed-use read/write activity, the older G9 unit routinely idled at 54–56°C, with peaks of 66–67°C on SSDs lacking heatsinks.

The improved model saw modest thermal gains, with idle temps reduced to 50–52°C at the CPU vent and around 56–57°C on the SSD layer. Some of this improvement came from the revised ventilation—namely the expanded top-panel fan cutout and rear-side mesh panel—yet the base remained the same thermally isolated plastic panel, and internal fan hardware remained unchanged.

Notably, temperatures around the rear I/O ports dropped by 5–7°C between versions, suggesting that airflow efficiency around the motherboard has improved even if core thermal load remains a challenge.

In terms of noise and power, the G9 performs admirably. Even under load, fan noise remained below 40dB, with idle operation being nearly silent. Power consumption remained within the expected range—19–21W idle and up to 30W under continuous activity—even during the 48-hour write test.

BIOS-level tuning is possible and can slightly reduce power draw or adjust fan thresholds, but no advanced power scaling or fan curve customization is exposed via software in stock OS images. More demanding operating systems like TrueNAS Scale ran stably on the G9 but did little to mitigate thermal behaviour, reinforcing the importance of user-added SSD heatsinks regardless of OS.

The lack of thermal sensors per SSD slot or fan feedback control means sustained operations should be closely monitored in hotter climates or enclosed environments.

Nowhere is the conversation about thermal and hardware design more relevant than in comparison to the Xyber Hydra, a near-identical system that appears to share much of its component sourcing with the G9—right down to the GMK-branded fans. The Hydra ships with 16GB of DDR5 memory, a metal base panel, and most notably, a thermal pad that bridges SSDs to the metal shell, allowing for actual heat transfer rather than passive convection. In direct tests, the Hydra consistently posted 5–10°C lower SSD temps under identical workload, with idle SSDs (no heatsinks) registering around 47–49°C versus 56–57°C in the improved G9.

Though the Hydra lacks branding clarity around its manufacturer, the design appears to be what the G9 should have evolved into: same layout and CPU, but better thermals, more memory, and more thought put into SSD dissipation. In conclusion, while the improved GMKTec G9 offers better thermals than its predecessor, the Xyber Hydra outperforms both G9 variants in every thermal category, making it the superior choice if cooling and memory capacity are priorities.

GMKTec G9 Ver.2 NAS Review – Verdict and Conclusion

The GMKTec G9, in its improved form, shows that the brand has listened—albeit cautiously—to thermal concerns raised by users and reviewers of the original model. The changes introduced in this updated version are minimal but measurable: better ventilation on the top panel and side mesh grille allow modest airflow gains, which result in lower surface and SSD temperatures across the board. Yet, GMKTec has stopped short of making any internal or structural upgrades that would more directly resolve thermal issues, such as introducing a metal baseplate, bundling SSD heatsinks, or adjusting the system’s internal fan architecture. All other hardware elements—CPU, memory, SSD configuration, I/O, BIOS, and software readiness—remain identical. As a result, while the device performs better in heat dissipation than before, it does so by a margin that may not justify an upgrade for existing G9 users. First-time buyers, however, may find it to be a safer choice now—particularly when paired with aftermarket heatsinks and used in moderate workloads.

However, the presence of the Xyber Hydra in the same price bracket poses a critical challenge to the G9’s value proposition. Offering the same N150 CPU, more memory, and a far superior thermal design with an integrated metal heat-spreading base, the Hydra addresses nearly every lingering complaint about the G9 without altering the system’s core layout. For prospective buyers deciding between the two, the G9’s only advantages now lie in its wider availability, slightly more recognizable branding, and marginally more mature firmware support. If those factors matter less than thermal reliability, long-term SSD health, and RAM headroom, then the Hydra is the more complete solution. Ultimately, the improved GMKTec G9 is a more stable and better-performing version of its former self, but its restrained upgrades feel like a missed opportunity in a market where near-clones have already moved ahead in meaningful ways.

Join Inner Circle

Want to follow specific category? Also Read...GL.iNet Comet Pro Review - TheGL.iNet Comet Pro ReviewWeek 33 Tech Roundup – TerraTerramaster D1 SSD ReviewTerramaster D4 SSD USB4 Box ReTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewSynology AI Console ReviewSynology AI Console Review - GDS1825+ vs DXP8800 PLUS NAS - Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Synology DS1825+ vs UGREEN DXP8800 PLUS NAS – Which Should You Buy?

In 2025, the market for high-capacity 8-bay NAS systems has become more competitive than ever, with traditional leaders like Synology now facing serious contenders from newer brands such as UGREEN. The Synology DS1825+ represents the company’s latest flagship in the Plus series, incorporating a more restrictive hardware ecosystem and a focus on long-term software support, surveillance integration, and backup solutions. In contrast, the UGREEN DXP8800 Plus leans heavily into raw hardware capability and customization, offering an unlocked platform for power users and DIY enthusiasts.

This head-to-head comparison explores both systems in terms of design, internal specifications, external connectivity, operating systems, and service ecosystems. Beyond surface specs, we’ll also assess real-world usability, third-party compatibility, and the broader implications of each system’s approach to expansion and user control. Whether you’re choosing a NAS for Plex, virtual machines, business continuity, or scalable 10GbE storage, this article aims to clarify which of these two NAS units better fits different user scenarios in 2025 and beyond.

Check Amazon for the Synology DS1825+ $1149.99	Check AliExpress for the Synology DS1825+ $1149	Check Amazon for the UGREEN DXP8800 Plus $1349.99	Check AliExpress for the UGREEN DXP8800 PLUS  $1149

Quick Summary of the Synology DS1825+ NAS

Synology DS1825+ NAS Review HERE

The Synology DS1825+ is an 8-bay desktop NAS that marks a significant shift in the company’s approach to hardware and compatibility. Equipped with the AMD Ryzen Embedded V1500B processor—a 4-core, 8-thread chip running at 2.2GHz —this system balances power efficiency with performance across general file operations, virtualization, and media hosting. It includes support for up to 32GB of ECC DDR5 memory (2x SODIMM, arriving with 8GB by default), two M.2 NVMe slots for Synology-only SSD caching, and an onboard 10GbE port alongside three USB 3.2 Gen 1 ports. However, Synology’s controversial locked ecosystem continues here, restricting users to only Synology-branded drives for full support and access to storage pools, along with limited use of the NVMe bays strictly for cache, not storage.

While its internal hardware is more capable than previous Plus series models, the DS1825+ removes several features seen in past units. By default, it arrives with 2x 2.5GbE network ports, with the option to scale upto 10GbE with the use of a 1st party upgrade PCIe card, but at this pricepoint many users wuld expect 10GbE as standard. The shift to DSM 7.2 brings a refined software experience, including native Active Backup for Business, Hyper Backup, Surveillance Station, and full Docker support. However, DSM’s increasing reliance on Synology’s own hardware and subscription services, such as C2 Surveillance Proxy and Synology Drive Server, makes it harder for users to customize or expand without sticking to Synology’s ecosystem. Overall, the DS1825+ is best suited for users who want an integrated, secure, and reliable NAS experience with minimal manual setup, provided they are comfortable with the tighter hardware constraints.

Quick Summary of the UGREEN DXP8800 PLUS NAS

UGREEN DXP8800 PLUS NAS Review HERE

The UGREEN DXP8800 Plus is an 8-bay NAS solution that positions itself as a powerful, open-platform alternative for users seeking greater control over hardware and software customization. At the heart of the system is the 8-core, 16-thread Intel Core i5-1235U processor, paired with 8GB of DDR5 memory (expandable up to 64GB), but lacks support for ECC memory. Unlike its Synology counterpart, the DXP8800 Plus supports a much wider range of third-party hard drives and SSDs, and offers 2x Gen 4×4 M.2 NVMe slots that can be used not only for cache but also for primary or tiered storage, depending on the user’s operating system. This flexibility is backed by a user-serviceable layout and BIOS access, which allows full compatibility with alternative NAS OS options such as TrueNAS SCALE, UnRAID, or OpenMediaVault.

Connectivity is another area where the DXP8800 Plus stands out. It features two native 10GbE (RJ45) ports, two 2.5GbE ports, and dual USB4/Thunderbolt 4 ports, dramatically expanding external storage, docking, and display capabilities. This, combined with onboard HDMI output and front-accessible USB 3.2 ports, makes it far more versatile for media creation, backup workflows, and even lightweight workstation use. However, the DXP8800 Plus does not come with a polished first-party NAS operating system—UGREEN’s UGOS Pro remains in early stages, and lacks many of the mature backup, surveillance, and cloud services found in DSM. As such, the DXP8800 Plus is ideal for tech-savvy users who value open architecture, higher hardware flexibility, and self-managed software ecosystems over out-of-the-box turnkey simplicity.

Synology DS1825+ vs UGREEN DXP8800 PLUS NAS – Design and Storage

The Synology DS1825+ maintains the familiar chassis style used in the Plus series, combining functionality with conservative aesthetics. It features a full-sized 8-bay front panel with lockable trays, designed for tool-less insertion of 3.5” SATA drives and optional 2.5” adapters. The main body is a mix of steel and plastic, with a focus on rigidity and reduced vibration. The system lacks any onboard display or LCD, offering only basic LED indicators for system status, drive activity, and alerts, which may frustrate users seeking at-a-glance diagnostics. Access to internal components like the DDR5 ECC RAM and dual M.2 NVMe slots requires removing the top cover and internal caddy brackets, which isn’t as straightforward as it could be—especially given that the NVMe slots are only usable for cache and require Synology-branded drives. Thermal management relies on dual 120mm rear-mounted fans, which operate quietly but are non-replaceable without voiding warranty due to the proprietary fan harness. Physically, the NAS is slightly larger than competing 8-bay units and lacks rubberized feet or vibration isolation, which may be relevant for users placing it on shared work surfaces or desks.

The UGREEN DXP8800 Plus delivers a contrasting design focused on space efficiency, cooling, and user-accessibility. The NAS is housed in a durable metal shell with perforated side panels and a high-density internal structure. Despite its smaller footprint, it manages to accommodate eight SATA bays, two 4X4 M.2 NVMe slots, two SODIMM slots, and active cooling—all while remaining user-serviceable with just a standard screwdriver. The hot-swap trays are spring-loaded and support tool-less 3.5” drives or 2.5” drives via included screws. Access to RAM and SSD slots is streamlined through a simple internal partition design that doesn’t require full disassembly, making upgrades significantly faster than on the DS1825+. The rear exhaust fan is larger than expected for a device this compact, and although thermals are generally within acceptable limits, our testing showed that M.2 SSDs running at PCIe Gen 3 speeds did reach over 65°C during sustained I/O, especially when mounted without aftermarket heatsinks. Unlike Synology, UGREEN includes front-mounted USB 3.2 Gen 2 ports (Type-A and Type-C), ideal for creators and users who frequently move large projects or footage onto the system using direct-attached storage.

When it comes to storage flexibility, the differences are stark. Synology’s DS1825+ enforces a strict hardware compatibility policy, where only Synology-certified HDDs (such as the HAT5300) and SSDs (SAT5200 or SNV3410/3510) are officially supported. Drives outside this list may trigger warnings, be ineligible for pools, or lose access to SMART health readings. NVMe drives cannot be used for storage volumes at all and are locked to caching roles only. These restrictions are enforced by DSM 7.2+ and persist even with the system fully updated.

By contrast, the UGREEN DXP8800 Plus places no such limits. Any SATA or NVMe drive can be used, and users can create pools across mixed-capacity and mixed-brand disks, including enterprise-grade drives. Storage volumes can be configured freely in supported OS environments, and the two M.2 slots can act as primary storage, tiered ZFS vdevs, or cache depending on the OS—TrueNAS SCALE, for instance, recognized all M.2 drives and allowed custom pool creation without issue. This makes UGREEN’s system more attractive to users with existing drives or specific ZFS/Btrfs layouts in mind.

Synology DS1825+ vs UGREEN DXP8800 PLUS NAS – Internal Hardware

he Synology DS1825+ is built around the AMD Ryzen V1500B processor, a 4-core, 8-thread embedded SoC designed specifically for NAS and server workloads. With a fixed base clock of 2.2GHz and no boost functionality, this Zen-based CPU focuses on stability, multi-threaded efficiency, and low power consumption, making it well-suited for consistent background operations like file serving, multi-client backups, and large-scale storage array management. The chip includes AES-NI support for hardware encryption acceleration and offers full compatibility with DSM’s virtualization stack, including Docker and Synology’s Virtual Machine Manager. However, the V1500B lacks an integrated GPU, and the DS1825+ does not support hardware transcoding, making it unsuitable for Plex or media applications that rely on real-time video encoding unless offloaded to cloud services like Synology C2. It’s a reliable and mature processor choice, albeit one that prioritizes stability over flexibility or raw speed.

The DS1825+ ships with 8GB of ECC DDR4 memory (1x SODIMM) installed, with support for up to 32GB across two slots, and ECC is supported on both official and some compatible third-party modules. The internal layout, however, is relatively restrictive. The memory and M.2 slots require tray removal and partial disassembly to access. Synology includes two M.2 NVMe slots that operate at PCIe Gen 3×4, but DSM only allows them to be used for read/write caching and only with Synology SNV3410 or SNV3510 SSDs. These slots are not available for storage pool creation or system boot, regardless of the SSD used. There is no PCIe slot or BIOS access, making this a closed system that enforces Synology’s validation model tightly. While this approach ensures stability, it limits performance tuning and locks users into higher-priced branded components.

The UGREEN DXP8800 Plus uses an Intel Core i5-1235U, a hybrid 10-core (2 performance, 8 efficiency), 12-thread mobile CPU built on the Alder Lake-U architecture. With a boost clock up to 4.4GHz and integrated Intel Xe graphics, it offers both multi-threaded efficiency and hardware video transcoding support via Quick Sync. This is ideal for users running Plex, Jellyfin, or AI-based video analysis locally. The system ships with 8GB of non-ECC DDR4 memory, expandable to 64GB, using standard SODIMM slots. UGREEN’s internal board features 2x M.2 NVMe slots operating at PCIe Gen 4×4 speeds, offering significantly more bandwidth than Synology’s Gen 3 slots. These SSDs can be used for boot, storage pools, or cache, and the system supports a wide range of third-party drives without warnings or restrictions. BIOS access is fully available, allowing installation of operating systems like TrueNAS, UnRAID, or Proxmox. UGREEN’s internal hardware favors openness and customizability, providing users with direct control over performance, expansion, and component choice—at the cost of requiring more technical expertise.

Synology DS1825+ vs UGREEN DXP8800 PLUS NAS – Ports and Connections

The Synology DS1825+ delivers a modest and business-focused range of connectivity options, designed primarily for reliability and integration within an IT-managed environment. It includes 2x 2.5GbE RJ-45 LAN ports, offering basic link aggregation or dual-network failover functionality. While this offers faster-than-Gigabit throughput, the lack of 10GbE out of the box may be limiting for users working with large media files or virtualization workloads, particularly in comparison to other 2025 systems.

The system provides 3x USB 3.2 Gen 1 (5Gbps) Type-A ports, all located on the rear, suitable for UPS integration, external storage, or compatible backup devices. In terms of expansion, Synology includes 2x USB Type-C ports, but these are reserved exclusively for connecting official DX525 expansion units. They do not support data transfer, peripherals, or USB-C accessories and serve only as proprietary expansion interfaces. No HDMI, DisplayPort, or audio outputs are included, and there is no SD card reader. This reinforces Synology’s design philosophy: operate headlessly, manage remotely, and keep the system within the bounds of their validated ecosystem.

In contrast, the UGREEN DXP8800 Plus positions itself as a fully-featured, hybrid-use NAS platform with wide-ranging I/O options for prosumers and professionals. It features 2x 10GbE RJ-45 LAN ports—a clear advantage over Synology’s 2.5GbE setup—offering significantly more bandwidth for media editing, VM hosts, or multi-user environments. On the front, UGREEN includes 2x Thunderbolt 4 (40Gbps) ports, which double as high-speed USB-C for peripherals, external drives, or even eGPU enclosures in supported OS setups. The rear provides 2x USB-A ports at 10Gbps, plus 2x USB 2.0 ports, allowing backward-compatible peripheral support. For display, the system includes 1x HDMI port with 8K output support, connected via Intel’s Xe iGPU, as well as a high-speed SD 4.0 card reader—a particularly valuable addition for content creators offloading camera media directly to the NAS. There is also a PCIe x4 slot for optional hardware expansion. This broad I/O layout enables the DXP8800 Plus to function as a headless NAS, a media server, or even a workstation replacement, depending on the OS you choose to run.

The gap in connectivity between these two NAS systems reflects their broader design philosophies. Synology has deliberately kept the DS1825+ minimal, standardized, and tightly integrated with its ecosystem, which enhances long-term support and serviceability but limits flexibility. UGREEN, on the other hand, offers extensive general-purpose ports that cater to a wider range of workflows—especially for users running Windows, Proxmox, TrueNAS, or virtualized environments. Whether it’s direct media ingestion via SD card, high-speed expansion through Thunderbolt, or dual 10GbE networking, the DXP8800 Plus outpaces the DS1825+ in almost every I/O category. However, this flexibility comes with the expectation that the user is comfortable with open-platform system management and a DIY-style deployment model.

Synology DS1825+ vs UGREEN DXP8800 PLUS NAS – Software and Services

The Synology DS1825+ runs on DSM 7.2, Synology’s mature and widely respected NAS operating system. DSM offers a broad ecosystem of native applications and services, including advanced storage management, multi-tiered backup solutions, virtual machine hosting, and comprehensive multimedia support. Key built-in tools such as Synology Drive, Hyper Backup, Active Backup for Business, Surveillance Station, and Synology Photos provide enterprise-grade data handling in a highly polished interface.

DSM also includes Snapshot Replication with Btrfs, granular folder/file-level restore, and Active Directory integration. Importantly, DSM supports features like Windows ACL permissions, Samba v4, WORM file locking, and two-factor authentication by default, with Synology’s C2 platform offering cloud sync, identity management, and secure backup options. However, DSM has increasingly tied deeper functionality (e.g., certain security tools and snapshots) to Synology-branded storage and expansion hardware, with third-party drive warnings now appearing by default.

UGREEN’s DXP8800 Plus runs UGOS Pro, a Linux-based operating system developed in-house. Now one year into active deployment, UGOS Pro has matured substantially with ongoing updates and wider feature support. The interface is clean and web-accessible, and recent updates have added core NAS functions previously missing. As of the latest firmware, Docker, virtual machine creation, and Jellyfin media server are all natively supported via one-click installs.

Importantly, iSCSI support was also added, addressing a key omission for enterprise or VMware users. 2-factor authentication (2FA) is now present, and security protocols include IP/MAC-level blocking, custom firewall rules, and access control policies. While UGREEN still lacks the depth of anti-ransomware protection found in DSM or QNAP’s QuFirewall, the fundamentals have improved dramatically. Local-only AI services for photo indexing and object recognition have also been refined, with user-selectable models running without internet access.

Where DSM excels in deep integration and business-class reliability, UGOS Pro stands out for its openness and responsiveness to user feedback. Users can enable SSH, customize OS-level settings, and even install TrueNAS, UnRAID, or Proxmox without voiding the warranty, as UGREEN has opted for an open-platform approach.

UGOS also supports Windows file services (SMB), NFS, and web-based file managers, though its permissions system and UI are still somewhat basic compared to DSM. Synology’s first-party software tends to offer higher polish, more documentation, and broader cross-platform support, particularly in cloud-integrated services, whereas UGOS is catching up in functional breadth but remains relatively limited in automation and long-term software ecosystem depth.

Both platforms include mobile apps and browser-based remote access, but Synology’s remote access via QuickConnect is significantly more user-friendly and secure out-of-the-box, while UGREEN’s remote services are best replaced or supplemented by Tailscale, Cloudflare Tunnel, or similar tools. Synology’s Surveillance Station also has years of development behind it with support for hundreds of IP cameras, whereas UGREEN does not yet include native surveillance software in UGOS Pro.

For users seeking a media-focused setup, UGOS offers a good local multimedia experience via Jellyfin, while DSM supports Plex and Video Station (with transcoding limitations depending on CPU). Ultimately, Synology’s DSM remains the more robust, enterprise-ready option, while UGOS Pro presents a highly promising and increasingly competitive open alternative that still favors self-managed users.

Synology DS1825+ vs UGREEN DXP8800 PLUS NAS – Verdict and Conclusion

The Synology DS1825+ remains a compelling choice for users prioritizing reliability, software integration, and long-term support. With the proven DSM 7.2 platform, it offers enterprise-grade tools for file management, backup, virtual machines, and surveillance. Features like Snapshot Replication, C2 cloud integration, and Active Backup for Business provide peace of mind for professionals who want a turnkey experience with minimal maintenance. Although hardware specs such as the Ryzen V1500B CPU and dual 2.5GbE ports might seem modest compared to rivals, they are more than adequate for office environments, multi-user file sharing, and even light virtualization. That said, its increasing reliance on Synology-branded drives and accessories, as well as its lack of GPU support and M.2 NVMe flexibility, could be frustrating for DIY enthusiasts or media-focused users.

By contrast, the UGREEN DXP8800 Plus is a hardware-forward NAS that emphasizes performance, bandwidth, and customization. With a 12-core Intel Core i5-1235U CPU, dual 10GbE, PCIe expandability, and full-speed Gen 4 NVMe slots, it is built for workloads that demand raw power—media servers, high-speed backups, AI indexing, and even containerized apps via Docker. UGOS Pro has matured considerably over the last year, with new features like iSCSI, 2FA, VM hosting, and Jellyfin support making it much more viable than at launch. Still, while UGREEN’s open architecture and wider SSD/drive compatibility are a strength, its software ecosystem isn’t yet as refined or battle-tested as Synology’s DSM, especially for more security-sensitive or compliance-bound environments. Surveillance features and enterprise-level monitoring tools are also still missing or immature in comparison.

In short, the Synology DS1825+ is best suited for SMBs, IT administrators, or content creators who want a dependable, low-maintenance NAS with rich native features and strong vendor support, especially where third-party remote access is limited or not desired. On the other hand, the UGREEN DXP8800 Plus is ideal for prosumers, media professionals, and tech-savvy users who want maximum hardware flexibility, faster internal/external transfer speeds, and the freedom to customize their NAS at the OS level, even if that means dealing with a slightly rougher software experience. If ease of use, documentation, and long-term stability are your priorities, the DS1825+ remains a safe bet. But if you’re looking for value in performance per dollar, more openness, and higher bandwidth potential, the DXP8800 Plus offers a lot for the price.

PROS	CONS	PROS	CONS
DSM 7.2 OS offers mature, stable, and feature-rich ecosystem with professional backup, replication, and VM tools. ECC DDR4 Memory (8GB expandable to 32GB) ensures greater data integrity and system stability. Broad software support including Surveillance Station, Active Backup, C2 Hybrid Cloud, and Hyper Backup. PCIe Gen3 slot allows for 10GbE or 25GbE network expansion or M.2 cache via supported adapters.   Low noise and power efficiency (~23.8 dB, ~60W during access), making it suitable for office environments.	Limited M.2 NVMe support (Gen3x4, only Synology-branded SSDs officially supported). No built-in GPU or transcoding support, limiting suitability for Plex or media conversion workflows.   Locks users into Synology drives/accessories, reducing flexibility and increasing costs over time.	High-performance Intel Core i5-1235U CPU (12-core, 10-thread) enables heavy multitasking, VMs, and AI workloads. Dual 10GbE LAN ports allow for ultra-fast network throughput and multi-client simultaneous access. Two M.2 NVMe Gen4x4 slots support broad range of SSDs for caching or fast storage pools. 64GB DDR5 upgrade support offers excellent memory headroom for Docker, virtualization, and AI indexing.   UGOS Pro now includes Jellyfin, Docker, VMs, iSCSI, and 2FA, closing many early software gaps.	UGOS Pro still lacks polished UI/UX compared to DSM; some features buried or poorly documented. No official Plex support and limited surveillance tools, weakening multimedia and NVR potential.   Brand trust and software maturity still lag behind market leaders like Synology or QNAP.
Check Amazon for the Synology DS1825+ $1149.99	Check AliExpress for the Synology DS1825+ $1149	Check Amazon for the UGREEN DXP8800 Plus $1349.99	Check AliExpress for the UGREEN DXP8800 PLUS  $1149

Join Inner Circle

Want to follow specific category? Also Read...Week 33 Tech Roundup – TerraSynology AI Console ReviewSynology AI Console Review - GSynology DS1825+ vs UGREEN DXPTerramaster F4 SSD NAS ReviewGMKTec G9 Ver.2 NAS Review - CWeek 31 Tech Roundup – 245TBGMKTec G9 NAS (New Improved CoTerramaster F4 SSD NAS ReviewUsing Unverified HDD/SSD on a Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Terramaster D1 SSD Review – Performance Made Sustainable?

The TerraMaster D1 SSD Plus is a compact, single-bay M.2 NVMe enclosure designed to deliver high-speed direct-attached storage over USB4, with a focus on professional workloads that demand both speed and stability. Aimed at users working with large, high-resolution files such as 4K and higher video editing projects, RAW photo archives, and heavy multimedia workflows, it supports transfer rates of up to 3,853MB/s read and 3,707MB/s write when paired with a compatible PCIe Gen 4×4 SSD. This performance level allows a 3GB file to transfer in around one second under optimal conditions, significantly reducing waiting times in post-production processes. The enclosure is compatible with a broad range of connection standards, including Thunderbolt 5/4/3 and USB4/3.2/3.1/3.0, making it adaptable to both modern and legacy system configurations. Measuring 112.5 × 60 × 33 mm and weighing 246g, it features a fully enclosed aluminium alloy body with passive cooling, designed to keep temperatures stable during sustained workloads without introducing fan noise. Additional onboard safeguards provide short-circuit, voltage surge, and electrostatic discharge protection, while its unibody construction aims to withstand continuous use in demanding environments. With no pre-installed SSD, the D1 SSD Plus supports M.2 2280 NVMe drives up to 8TB, giving users the flexibility to choose their own storage based on performance or capacity priorities.

Terramaster D1 SSD Review – Quick Conclusion

The TerraMaster D1 SSD Plus is a compact, bus-powered USB4 enclosure built for sustained high-speed storage with a focus on stability, thermal efficiency, and cross-platform compatibility. Using the ASMedia ASM2464PDX controller with a PCIe Gen 4×4 lane configuration, it can fully exploit 40Gbps bandwidth when paired with a suitable SSD, maintaining 3,000MB/s+ read and 2,500MB/s+ write speeds without throttling during prolonged workloads. Its fully aluminium passive cooling design keeps drive temperatures around 44–45°C under heavy use while remaining completely silent, making it suitable for both desktop and field use. Supporting capacities up to 8TB, multiple file systems, and connection standards including Thunderbolt 5/4/3 and USB 3.x, it integrates easily into macOS and Windows workflows. However, the short 0.3m USB4 cable can limit positioning flexibility, and performance is heavily dependent on choosing a PCIe Gen 4×4 SSD, with no official compatibility list provided. Overall, it offers strong build quality, sustained performance, and portability, making it a capable option for professionals and power users seeking reliable high-speed external NVMe storage.

BUILD - 10/10

HARDWARE - 9/10

PERFORMANCE - 9/10

PRICE - 7/10

VALUE - 8/10

8.6

PROS

High Sustained Performance – Maintains 3,000MB/s+ read speeds and 2,500MB/s+ write speeds under extended workloads without thermal throttling.
Transparent Technical Specs – Clearly states controller model, lane allocation, and maximum tested speeds, aiding informed SSD selection.
Robust Passive Cooling – Fully aluminium chassis with integrated heatsink keeps SSD temperatures around 44–45°C under load.
Broad Compatibility – Works with USB4, Thunderbolt 5/4/3, and USB 3.x systems across macOS and Windows.
Portable and Silent – Compact (112.5 × 60 × 33 mm), fanless design makes it easy to carry and noise-free during operation.
Flexible SSD Choice – Supports PCIe NVMe M.2 2280 drives up to 8TB with multiple file system formats (NTFS, exFAT, APFS, EXT4).

CONS

Short Supplied Cable – 0.3m USB4 cable may be impractical for certain desktop or fixed workstation setups.
Performance Depends on SSD Selection – Using Gen 3 or slower-lane SSDs can reduce speeds by up to half.
No Drive Compatibility List – Lacks detailed recommended SSD model chart to guide optimal performance choices.

Where to Buy a Product
			VISIT RETAILER ➤
			VISIT RETAILER ➤

Terramaster D1 SSD Review – Design and Storage

The D1 SSD Plus adopts a minimalist, industrial-style design built entirely from aluminium alloy, providing both structural durability and efficient passive heat dissipation. Its solid unibody construction not only makes the device more resistant to daily wear but also allows for a larger heat-spreading surface compared to typical plastic or hybrid enclosures. Measuring just over 11 cm in length, it remains small enough for mobile use while retaining the thermal mass needed to handle sustained high-speed transfers without performance throttling. The matte finish helps reduce the appearance of fingerprints and scratches, making it better suited to frequent handling in professional environments.

Internally, the unit supports a single M.2 2280 PCIe NVMe SSD, accommodating capacities of up to 8TB in a single slot. The choice to limit support to NVMe, rather than SATA-based M.2 drives, ensures the interface is not a bottleneck to the USB4 connection. The enclosure uses a PCIe Gen 4×4 lane allocation, meaning that while it can achieve impressive transfer speeds, installing a Gen 3 drive will limit throughput to roughly half the rated maximum. This makes SSD selection critical for users seeking top performance, especially in workflows involving large sequential file transfers or high-speed scratch disk usage.

The passive cooling system is one of the more notable aspects of the D1 SSD Plus’s design. Instead of an active fan, the aluminium chassis itself acts as a heatsink, with thermal pads positioned to draw heat away from the SSD and controller. During testing with repeated large file transfers, drive temperatures peaked at around 44–45°C, and the enclosure exterior measured approximately 41–42°C, remaining well below thermal throttling thresholds. This approach eliminates moving parts, improving reliability and making the device completely silent, a benefit for audio-sensitive production environments.

From a portability perspective, the D1 SSD Plus is supplied with a compact 0.3m USB4 Type-C cable and a soft carry bag for transport. The short cable supports 40Gbps data rates and up to 240W power delivery, though its length may be restrictive for certain setups, such as when connecting to desktop systems positioned under a desk. Weighing just 246grams without a drive, it is light enough to be carried daily yet solid enough to feel substantial in use.

In terms of safety and operational protection, TerraMaster has included components to guard against short circuits, power surges, and electrostatic discharge. These measures, combined with the robust chassis, aim to keep the enclosure operational even in less controlled environments such as on-location shoots or travel-based editing sessions. For storage expansion scenarios, it can act as either a primary drive for active projects or a fast external repository for completed work, depending on the installed SSD’s performance and endurance characteristics.

Terramaster D1 SSD Review – Internal Design

Inside the D1 SSD Plus, the primary component enabling its performance is the ASMedia ASM2464PDX controller. This USB4-to-PCIe bridge is widely used in high-speed external enclosures, offering stable throughput and supporting PCIe Gen 4×4 lane allocation to the installed SSD. TerraMaster is unusually transparent in publicly listing the controller model and lane configuration, information that many manufacturers omit. This clarity helps users understand the real-world performance limits and the importance of pairing the enclosure with a compatible SSD to reach the quoted speeds.

The M.2 slot supports the 2280 form factor exclusively and is physically keyed for NVMe drives, preventing the installation of incompatible SATA models. Internally, thermal pads are pre-positioned to ensure consistent contact between the SSD and the aluminium housing, which doubles as a heatsink. This direct contact method maximises heat transfer efficiency, enabling the enclosure to sustain high-speed operation without thermal throttling. The lack of an active fan reduces power draw and potential mechanical failure points, aligning the product with professional needs for quiet and reliable operation.

The enclosure draws power entirely from its USB4 connection, operating at 5V and consuming up to 7.5W during active read/write workloads. In idle or hibernation mode, this drops to around 5.5W. The absence of a dedicated power supply simplifies setup and enhances portability, though it also means that connection stability is dependent on the host device’s USB port quality and adherence to USB4 or Thunderbolt specifications. This bus-powered approach makes the D1 SSD Plus practical for mobile workstations, ultrabooks, and modern desktops without spare power connections.

Component / Feature	Detail
Controller	ASMedia ASM2464PDX (USB4 to PCIe Gen 4×4 bridge)
Supported SSD Types	PCIe NVMe M.2 2280 only
Maximum Supported Capacity	8TB (single drive)
Lane Allocation	PCIe Gen 4×4
Cooling System	Passive aluminium heatsink with thermal pad contact
Power Source	Bus-powered via USB4 (5V)
Power Consumption	7.5W active, 5.5W hibernation
Thermal Management	Peak SSD temp ~45°C, enclosure ~42°C under sustained load

Terramaster D1 SSD Review – Connection and Bandwidth

The D1 SSD Plus features a single USB Type-C port located at the rear of the enclosure, serving as its sole data and power interface. This port supports USB4 at 40Gbps, ensuring maximum compatibility with modern high-speed standards while maintaining backward support for Thunderbolt 5/4/3 and USB 3.x generations. This allows the enclosure to integrate into a range of environments, from the latest Apple Silicon systems to older Windows workstations. However, TerraMaster notes that certain Thunderbolt 3-equipped Windows PCs may lack complete USB4 protocol support, which can prevent the device from being recognised unless connected to a different port.

The included 0.3m USB4 cable is rated for the full 40Gbps bandwidth and supports up to 240W of power delivery, even though the enclosure itself draws only a fraction of that power. Its short length makes it well-suited for portable laptop-based workflows but less ideal for desktop systems that require longer reach. Users seeking more flexibility may need to source a third-party cable with equivalent specifications to maintain the enclosure’s full performance potential.

Given the high-speed nature of USB4, signal integrity is critical. The D1 SSD Plus uses a reinforced internal connector to reduce wear and maintain a stable connection over repeated cable insertions. Combined with the aluminium body’s shielding properties, this helps minimise data errors and interference, which is particularly relevant when transferring large multimedia files or working directly from the drive in editing software.

Terramaster D1 SSD Review – Tests

In synthetic benchmarks, the D1 SSD Plus achieved results close to its advertised maximums when paired with a high-quality PCIe Gen 4×4 SSD. Using an AJA 1GB test file loop, sustained read speeds were observed between 3,000 and 3,100MB/s, with writes maintaining 2,550 to 2,600MB/s.

Peak measurements during testing reached 3.55GB/s for reads and 2.8GB/s for writes, confirming that the enclosure can deliver high throughput consistently without early throttling. Mixed workload tests, such as a 70/30 read/write access pattern, still sustained around 2,500MB/s, indicating balanced performance even under varied data operations.

CrystalDiskMark results mirrored the AJA findings, with sequential read speeds consistently exceeding 3,000MB/s and writes holding near 2,600MB/s in repeated trials. These figures place the D1 SSD Plus among the faster single-bay USB4 enclosures currently available, particularly in its ability to sustain speeds over prolonged activity. The stability here is largely attributed to the passive aluminium cooling, which prevented temperature-induced drops in transfer rates that are common in less thermally capable designs.

Real-world file transfers also reflected strong performance. A 100GB mixed-content dataset consisting of video clips, high-resolution images, PDFs, and documents transferred in 63 seconds, averaging 1.58GB/s over the duration. While this figure is lower than synthetic benchmark peaks, it remains well above the speeds of typical USB 3.2 enclosures, providing tangible time savings for users moving large batches of files. The ability to maintain high sustained write speeds is particularly beneficial for workflows such as direct-to-disk recording or continuous large dataset backups.

Temperature monitoring during performance testing showed the installed SSD peaking at 44–45°C after over five minutes of sustained large file writes, with the enclosure’s exterior registering around 41–42°C. These results suggest that the cooling system is sufficient to handle extended workloads without user intervention, making the D1 SSD Plus a viable option for scenarios where the drive may be used heavily for prolonged periods, such as editing directly from the external storage.

Terramaster D1 SSD Review – Verdict and Conclusion

The TerraMaster D1 SSD Plus positions itself as a high-speed, bus-powered USB4 enclosure that places equal emphasis on sustained performance, heat management, and compatibility across multiple connection standards. Its integration of the ASMedia ASM2464PDX controller with a PCIe Gen 4×4 lane configuration ensures that it can fully utilise the available 40Gbps bandwidth when paired with a suitable SSD, avoiding the thermal throttling that can undermine performance in less capable enclosures. TerraMaster’s decision to openly publish controller details, lane allocation, and maximum tested speeds gives technically minded buyers more confidence in what the enclosure can achieve, and helps explain why it maintained stability during repeated multi-gigabyte transfer tests in your review. The combination of a compact footprint, aluminium passive cooling, and complete silence during operation makes it suitable not only for static desktop setups but also for field work, where portability and reliability matter. With support for capacities up to 8TB and a choice of file systems including NTFS, exFAT, APFS, and EXT4, it can be easily integrated into both macOS and Windows workflows without major reconfiguration.

There are, however, practical considerations for prospective buyers. The included 0.3m USB4 cable, while capable of full 40Gbps data rates and 240W power delivery, is short enough to be inconvenient for tower PC users or multi-device workstations, and replacing it with a certified high-speed cable may be necessary in such environments. Furthermore, although the enclosure can accept any PCIe NVMe M.2 2280 SSD, achieving top-tier performance depends on selecting a PCIe Gen 4×4 drive, as using Gen 3 or slower-lane SSDs can halve the potential throughput. Your review also highlighted that while TerraMaster frequently notes the importance of Gen 4 drives, they do not provide detailed compatibility charts or recommend specific models, which could help less experienced buyers avoid suboptimal results. In practice, the D1 SSD Plus delivers a combination of sustained speed, thermal efficiency, and solid build quality that positions it as a strong choice for video editors, media professionals, and advanced home users who require portable storage without sacrificing reliability or performance.

Join Inner Circle

Want to follow specific category? Also Read...Week 33 Tech Roundup – TerraTerramaster D4 SSD USB4 Box ReTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewTerramaster F4 SSD NAS ReviewTerramaster F4 SSD NAS ReviewTerramaster Prime Day 2025 - ATerramaster Prime Day 2025 - ASynology vs Terramaster NAS - Synology vs Terramaster in 202 Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Xyber Hydra NAS Review

Note – there is going to be ALOT of comparisons with the GMKtec G9 Nucbox NAS in this review. This is because the Hydra is clearly either built in partnership with GMKtec, or at least using branded components from the same factory (see example below). Likewise given this system’s similarity to the G9 and attempts to improve upon the heat criticisms of that device, it is inevitable that comparisons need to be made. If you want to learn more on it, find out more HERE and HERE .

The Xyber Hydra N150 NAS is a compact, four-bay, flash-focused network storage appliance designed for home users, small-scale media servers, and lightweight virtualization or container workloads. It is powered by the Intel Twin Lake N150 processor, a quad-core, low-power x86 CPU with a 6W TDP, making it energy-efficient while still capable of handling NAS-centric tasks like 4K media playback and multi-client file sharing. The Hydra comes equipped with 16GB of fixed LPDDR5 memory, which is soldered directly to the mainboard, offering slightly more headroom than comparable systems like the GMKtec G9, which ships with 12GB. Out of the box, it includes a 64GB eMMC module with Ubuntu OS pre-installed and ready to boot, enabling first-time users to deploy it with minimal setup. At an introductory price of $218.99, it is one of the more affordable quad-core NAS units in its category, and it even arrives with a 512GB M.2 SSD pre-installed in one of its four PCIe Gen 3×2 slots, saving buyers the immediate cost of adding their own storage.

Although visually and structurally similar to the GMKtec G9, with identical port layouts, vent positions, and internal fans — even down to the GMK-branded fans noted during inspection — the Hydra differentiates itself with a more robust passive cooling solution, a thicker, heat-dissipating metal baseplate, and wireless connectivity that supports UnRAID out of the box. These small but meaningful changes target some of the criticisms of its predecessor while maintaining the same compact form factor and low power consumption, which are critical in a shared home or office environment.

Xyber Hydra NAS Review – Quick Conclusion

The Xyber Hydra N150 NAS positions itself as a compact, affordable, and feature-complete flash-based NAS for home and small office users who prioritize a balance of cost, usability, and functionality. Compared to similarly specced models like the GMKtec G9, the Hydra delivers several notable improvements, including a thicker metal base plate that provides superior passive cooling for the M.2 SSDs and overall system stability under load. The inclusion of 16GB of fixed LPDDR5 memory — higher than many competitors in this category — combined with a preinstalled 64GB eMMC module running Ubuntu and an additional 512GB NVMe SSD in Bay 1 means the device is immediately operational out of the box, requiring no initial storage or OS setup for those who prefer simplicity. The four M.2 NVMe bays each operate at PCIe Gen3 x2, and the system’s dual 2.5GbE ports with link aggregation, HDMI outputs, and Wi-Fi 6 support add flexibility for wired and wireless deployments. During testing, the device handled sustained read and write loads respectably, although full bandwidth potential is naturally limited by the Intel N150 CPU and the available PCIe lanes, which is expected at this price point. The soldered memory and non-upgradable RAM limit future scalability, and the cooling fans require manual adjustment in the BIOS to achieve optimal thermal dissipation during intensive workloads, but neither of these compromises is unusual in this segment. Overall, at its introductory price of $218.99, the Xyber Hydra provides a solid combination of improved thermals, ready-to-use OS and storage, and efficient flash performance in a small, quiet, and energy-efficient chassis — making it a practical choice for users who want a capable NAS solution without the complexities and cost of larger, enterprise-class systems.

BUILD QUALITY - 7/10

HARDWARE - 7/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 9/10

8.0

PROS

Improved thermal design with a thicker metal base plate for better heat dissipation compared to similar models.
Includes 64GB eMMC storage preloaded with Ubuntu OS for out-of-the-box usability.
Ships with a 512GB M.2 NVMe SSD in Bay 1, providing immediate usable storage.
Fixed 16GB LPDDR5 memory — higher than comparable devices — supports more concurrent tasks.
Wi-Fi 6 module with dual antennas, compatible with UnRAID, enabling flexible wireless deployment.
Four M.2 NVMe bays, each supporting PCIe Gen3 x2, allowing up to 4 SSDs for flash storage arrays.
Dual 2.5GbE ports with link aggregation support for improved network throughput.
Compact, quiet, and energy-efficient form factor suitable for home and small office environments.

CONS

Memory is soldered and non-upgradable, limiting future scalability.
PCIe Gen3 x2 and CPU bandwidth constraints limit maximum aggregate performance under full load.
Fans require BIOS adjustments for optimal thermal control during heavy sustained workloads.

Xyber Hydra NAS Review – Design and Storage

The Xyber Hydra N150 follows a minimalistic and highly compact design philosophy, measuring roughly 100mm square and slightly taller than most mini-PC NAS chassis to accommodate the four vertically-mounted M.2 SSD bays. It shares its external dimensions and general visual design with the GMKtec G9, including the placement of dual fans on the underside and venting around the periphery. However, unlike the G9, which uses a plastic bottom panel that does little to aid thermal dissipation, the Hydra replaces this with a solid, vented metal plate that doubles as a passive heat sink for the M.2 drives.

Internally, each M.2 bay is aligned with a pre-applied thermal pad that contacts directly with the thicker metal plate, promoting more even heat spread and helping to avoid the localized hot spots that were reported in earlier reviews of the G9.

The result is a chassis that retains the same small footprint and quiet operation while making better use of its passive cooling surfaces, critical in a flash-based NAS where SSD thermal throttling can become a bottleneck. The overall construction remains lightweight yet rigid, with the entire enclosure built around a metal alloy frame finished with a matte black exterior that resists fingerprints and blends well into modern home or office environments.

On the storage side, the Hydra offers four M.2 2280 NVMe slots, each rated for PCIe Gen 3×2 speeds — a slight but notable advantage over many competitors still using Gen 3×1 lanes per slot.

This configuration allows for theoretical single-drive bandwidths approaching 2GB/s, with practical performance in the range of 1.4–1.5GB/s reads and 1.1GB/s writes as observed in testing.

The system arrives preconfigured with a single 512GB NVMe SSD installed in Bay 1, providing an immediate usable pool of storage alongside the 64GB eMMC that hosts Ubuntu.

Importantly, the eMMC storage is mounted separately, leaving all four M.2 slots fully available for user expansion.

The choice of M.2 storage allows for dense, silent operation with lower power draw than traditional 3.5” or 2.5” drives, but it does limit hot-swapping and requires opening the chassis for upgrades or replacements — a trade-off typical of devices at this size and price point.

Additionally, the Hydra supports popular NAS operating systems beyond the preloaded Ubuntu, such as UnRAID and TrueNAS, which take full advantage of the NVMe-based array and facilitate different RAID configurations. One critical area of focus in the Hydra’s design is the improved thermal management compared to the G9. Temperature testing revealed clear improvements under both idle and sustained load conditions.

AS A REMINDER – THE TEMPS BELOW ARE FROM THE GMKTEC G9:

At idle, with the fans in automatic mode, the surrounding chassis temperature stabilized around 52–54°C, and the baseplate measured approximately 50–52°C after a 24-hour period of light access — respectable figures given the compact enclosure. Under heavier workloads, where all four SSDs were simultaneously subjected to repeated write tests, the baseplate peaked at 62°C with the CPU hitting full utilization. While this level of heat is not unusual for a fully-loaded NVMe NAS, the system took a long time — nearly five hours — to dissipate that heat and return to sub-50°C base temperatures when the fans remained in automatic mode. Switching to manual fan control in the BIOS and setting both fans to maximum brought the temperature down much more quickly, keeping the chassis in the mid-40°C range even under sustained load, albeit at the cost of increased noise and marginally higher power draw.

AND HERE ARE THE TEMPS OF THE XYBER HYDRA NAS FOR COMPARISON:

The improved thermal contact via the thicker metal plate and better thermal pads clearly mitigates some of the thermal throttling concerns seen in earlier systems with less effective heat spreaders.

AND HERE ARE THE TEMPS OF THE XYBER HYDRA NAS FOR COMPARISON:

Power consumption and noise measurements during testing demonstrated the efficiency of the Twin Lake platform. In an idle state with the system fully populated with four NVMe drives and minimal CPU activity (4–6% utilization), power draw stayed at a modest 15.6–15.7 watts. During full-load scenarios, including simultaneous writes to all four SSDs and 100% CPU utilization with fans at maximum, peak power consumption rose to around 26–27 watts.

These figures are reasonable for a small-form-factor NAS and illustrate the platform’s balance of performance and efficiency. Acoustic levels were similarly modest: at idle with fans on automatic, noise levels measured between 30–32 dBA, increasing to 37–38 dBA when the fans were manually set to maximum in the BIOS. This makes the system viable for use in environments where low noise is desirable, without sacrificing much in the way of cooling when needed.

Another noteworthy design element is the inclusion of a Wi-Fi 6 module with two antennas, offering wireless connectivity that is now supported by UnRAID. The wireless module sits beneath the eMMC module and is connected internally without consuming any of the four NVMe slots. This makes it possible to deploy the Hydra wirelessly, adding flexibility in environments where cabling is limited, though for maximum bandwidth the dual 2.5GbE ports remain preferable. The antennas are discreetly mounted to the rear of the chassis, maintaining the device’s clean lines and compact appearance.

The Hydra’s design prioritizes compactness, quiet operation, and efficient use of its internal volume. The choice of an all-NVMe storage configuration, preloaded OS on eMMC, and improved passive cooling all contribute to making it a more capable and thermally balanced alternative to similar NAS devices. The metal baseplate, though seemingly a small change, represents a meaningful improvement in reliability for users planning heavier sustained workloads on a budget-friendly flash NAS.

Below is a summary table of the Xyber Hydra’s tested performance metrics:

Xyber Hydra NAS Review – Internal Hardware

At the heart of the Xyber Hydra N150 NAS is the Intel Twin Lake N150 processor, a 4-core, 4-thread CPU with a base TDP of 6W and burst frequency up to 3.6GHz. This is the same CPU found in the GMKtec G9, offering modest but sufficient processing power for lightweight NAS duties, such as file serving, 4K media playback, and hosting a handful of Docker containers or virtual machines. The Hydra’s choice to stick with the N150 over more power-hungry options like the N355 reflects a deliberate balance between thermals, noise, and power efficiency in such a confined chassis.

The CPU is passively cooled through the same baseplate and active fans that handle SSD thermals, and testing showed it remained below 60°C even during full-load stress tests when fans were set to automatic. When set to maximum in BIOS, the CPU temperature remained even lower, consistently in the mid-40°C range, indicating that the thermal headroom of this setup is acceptable for the N150’s intended use cases. While the CPU is not equipped with QuickSync hardware transcoding found in Intel’s higher-end processors, it did demonstrate capable software transcoding during single-stream 4K Plex playback without pushing the CPU beyond 80% utilization.

One area where the Hydra stands apart slightly from its competitors is its memory configuration. Instead of the 12GB soldered LPDDR5 memory seen in the G9, the Hydra comes pre-equipped with 16GB LPDDR5 memory, also soldered directly to the board and therefore not user-upgradable. This extra 4GB provides additional breathing room for multi-tasking, running memory-intensive services, or hosting larger numbers of containers without encountering swap usage under typical loads. The memory is clocked at 4800MHz and, as expected at this price point, is non-ECC. Given the system’s target market and workload scenarios, this is a reasonable trade-off — ECC memory would nearly double the cost of the system for relatively little gain in this context. The fixed nature of the memory remains a limitation for power users but ensures predictable thermal and power behavior that a socketed SO-DIMM might not allow in such a tightly-engineered package.

Component	Specification
Processor (SoC)	Intel Twin Lake N150, 4 cores / 4 threads, 3.6GHz burst, 6W TDP
Memory	16GB LPDDR5 (4800MHz, soldered, non-upgradable)
eMMC Storage	64GB onboard, preloaded with Ubuntu OS
NVMe Slots	4x M.2 2280 NVMe (PCIe 3.0 x2 per slot)
Cooling	Passive aluminum baseplate with thermal pads + dual active fans
Thermals (CPU)	~45–60°C under load depending on fan settings

Hydra’s internal hardware is clearly aimed at delivering solid performance for home and small-office NAS duties while maintaining a low noise profile and power envelope. While it is not designed for demanding enterprise workloads or highly parallelized tasks, it offers a balanced set of capabilities appropriate to its price and physical footprint.

Xyber Hydra NAS Review – Ports and Connections

The Xyber Hydra N150 NAS offers a fairly comprehensive array of ports and connectivity options, matching its closest competitor, the GMKtec G9, almost identically. On the rear panel, the system is equipped with two Intel i226-V 2.5GbE RJ45 ports, which support link aggregation and failover. These provide a theoretical combined throughput of up to 550–580 MB/s when paired with appropriately configured switches.

While some users may be disappointed by the absence of 10GbE, this is an understandable compromise given the limitations of the N150 CPU’s PCIe lane budget and the heat constraints of such a compact design. As noted during testing, users can reclaim one of the M.2 slots to install a PCIe-to-10GbE adapter, though this does come at the cost of one storage bay.

The networking implementation also includes support for wake-on-LAN (WoL) and PXE boot functionality, adding flexibility for remote management and deployment scenarios. The system also integrates an M.2 Wi-Fi 6 module with dual antenna outputs. This enables wireless network support, now even compatible with UnRAID as of recent updates, and can serve as either a primary or fallback network connection in environments where cabling is not practical.

In terms of USB connectivity, the Hydra provides a total of four ports: three USB 3.2 Gen 2 Type-A ports located on the rear panel, and one USB-C port that is also used for power delivery. The three USB-A ports deliver up to 10Gbps each, which is sufficient for attaching external backup drives, additional storage enclosures, or other peripherals such as a UPS monitoring interface. The USB-C power connector is fed by an external wall-mounted 48W integrated external power brick, which means users cannot simply swap in any generic USB-C charger — it is a dedicated high-wattage supply.

This design choice ensures sufficient and stable power delivery to all internal components even under peak load, but it does limit flexibility somewhat compared to true USB-PD-compatible implementations. Users looking to attach keyboards, mice, or other USB peripherals directly to the system will find that the port count is adequate, though not expansive.

For video output, the Hydra offers two HDMI 2.0 ports, supporting up to 4K resolution at 60Hz. These are useful for initial OS installation or configuration, as well as for users who intend to repurpose the NAS as a hybrid media player or thin client. During testing, the HDMI output worked without issue on both the preinstalled Ubuntu OS and when booting into alternative operating systems. While video output is rarely essential for a headless NAS, its inclusion enhances usability, especially for less experienced users or those deploying the system in multi-role environments. Combined with the USB ports and network interfaces, the Hydra provides a balanced set of I/O suitable for its intended use cases, with enough bandwidth to fully utilize its internal storage under typical workloads.

Below is a summary table of the ports and connections on the Xyber Hydra:

Xyber Hydra NAS Review – Conclusion and Verdict

The Xyber Hydra N150 NAS represents a deliberate and measured evolution of the budget-friendly compact NAS formula, clearly designed to resolve key weaknesses of similar products like the GMKTec G9 without altering the fundamental architecture. Its use of a thicker, thermally conductive metal base plate provides demonstrable improvement in heat dissipation compared to the plastic underside of the G9, a difference borne out in extended load testing where temperatures stabilized more quickly and stayed lower when fan profiles were adjusted. The pre-installed 64GB eMMC module running Ubuntu out of the box eliminates the initial configuration barrier often faced by novice users, while still allowing more experienced users to easily replace it with their OS of choice, such as ZimaOS or TrueNAS. The inclusion of a 512GB NVMe SSD in the primary M.2 bay adds immediate storage capacity without requiring an upfront investment in additional drives, an uncommon but practical feature at this price point.

Internally, the decision to provide 16GB of fixed LPDDR5 memory — 4GB more than its nearest comparable competitor — gives the Hydra slightly more headroom for memory-intensive tasks, such as running lightweight container workloads or maintaining a larger metadata cache for media streaming applications. While the memory remains non-upgradable, the choice of capacity is a reasonable compromise given the constraints of the Intel N150 platform and the system’s focus on cost efficiency. The integrated Wi-Fi 6 module, with dual antennas and full UnRAID compatibility, is another meaningful addition, enabling wireless deployments where cabling is impractical and expanding the deployment scenarios for home and small office users. These subtle but important upgrades make the Hydra feel more complete out of the box, catering to a broader range of use cases with fewer compromises.

That said, the Hydra still shares many of the inherent trade-offs of its class. The N150 processor is adequate for modest workloads, but becomes saturated under sustained high parallel usage, especially when all four M.2 slots are simultaneously active and the CPU nears 100% utilization. The PCIe lane limitations of the platform, with each M.2 slot limited to Gen3 x2 speeds, restrict the aggregate performance potential of RAID arrays or concurrent high-bandwidth operations. Similarly, the continued reliance on dual 2.5GbE ports limits maximum external throughput despite the internal SSD bandwidth being capable of more, and although M.2-to-10GbE adapters remain an option, they come at the cost of sacrificing one storage slot. BIOS-level adjustments are also required to extract the best thermal and fan performance under heavy use, something that more advanced users will appreciate but could frustrate beginners.

Overall, at its introductory price of $218.99, the Xyber Hydra N150 achieves a strong balance of value, practicality, and refinement in the entry-level NAS segment. The thoughtful inclusion of extras — the 64GB bootable eMMC, 512GB SSD, improved cooling, and additional memory — make it feel more turnkey than competing models, while still leaving room for advanced customization. It’s a sensible option for users seeking a compact and efficient NAS for personal cloud storage, light virtualization, or as a dedicated media server, provided expectations around CPU and networking throughput are kept realistic. For its target audience, the Hydra is a compelling and notably improved choice that addresses many of the criticisms of earlier designs without abandoning the affordability that defines this class of devices.

Join Inner Circle

Want to follow specific category? Also Read...GL.iNet Comet Pro Review - TheGL.iNet Comet Pro ReviewWeek 33 Tech Roundup – TerraTerramaster D1 SSD ReviewTerramaster D4 SSD USB4 Box ReTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewSynology AI Console ReviewSynology AI Console Review - GDS1825+ vs DXP8800 PLUS NAS - Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

AI Console for Synology Mail Plus and Synology Office – But Should You Use It?

Note -Thanks again to Daniel from Germany for all his support and assistance for this video. Visit his site HERE

Synology has introduced a new software package called AI Console, aimed at integrating third-party AI and large language model (LLM) services directly into select Synology productivity applications. The package is available on devices running DSM 7.2 or later and supports only certain x86-64 NAS models, reflecting the higher processing and memory requirements of AI workloads.

Rather than running its own local AI engine, Synology provides a centralised management tool for connecting to established AI providers, including OpenAI, Azure OpenAI, Google Gemini via AI Studio or Vertex AI, Amazon Bedrock, and Baidu AI Cloud. Once linked using the administrator’s API key, these services can be used within Synology MailPlus and Synology Office to perform tasks such as summarising long emails, generating responses, translating text, adjusting tone, and producing refined document content.

The AI Console is designed with administration and control in mind. It allows system managers to configure access on a per-package basis, selectively enabling or excluding AI features for specific users or groups. Advanced options include setting daily or per-minute token limits for each user to control consumption and manage costs, as usage charges are determined by the chosen AI provider rather than Synology itself. For privacy protection, the Console supports a de-identification process that can mask predefined categories of sensitive data before prompts are sent to an AI provider, with the original data restored after the response is received.

Administrators can monitor adoption and usage trends through transaction logs, which capture request details such as timestamps, IP addresses, API models used, and token counts, alongside admin logs that record configuration changes. While the AI Console does not add AI functionality to all DSM applications, it focuses on extending the business-oriented MailPlus and Office suite. However, this is not a move that will please all Synology owners or buyers, as some value their NAS primarily for complete local data control and may view any cloud-connected AI integration as an unnecessary or risky addition.

Why is Synology AI Console So Contentious?

The idea of adding AI functionality to a NAS is divisive because many users adopt these systems specifically to avoid reliance on cloud-based services. A key selling point of a Synology NAS has long been the ability to store, process, and back up data entirely within the user’s own premises, retaining full control over where that data resides and who can access it.

By design, the Synology AI Console connects to external AI providers through API calls, meaning that text-based content from MailPlus or Office documents is transmitted to third-party servers for processing. Even with encryption in transit and privacy safeguards such as de-identification, this external dependency conflicts with the expectations of users who purchased a NAS to minimise exposure to external networks. This tension is heightened by the fact that the AI operations do not run locally on the NAS hardware, which for some buyers undermines the appeal of integrating AI into a device marketed for self-contained operation.

Another factor making AI use contentious is the trust and compliance aspect. Many NAS deployments are in small businesses, professional environments, or home offices handling sensitive material. Sending even anonymised extracts of communications or documents to an external service raises compliance questions for organisations bound by strict data protection rules, especially in regulated industries such as healthcare, finance, or legal services.

While the AI Console provides administrative controls, auditing tools, and the option to disable AI entirely for certain users or packages, the underlying reality remains that data is leaving the local network for processing. This creates a fundamental divide between those who welcome AI for its productivity benefits and those who see any form of off-device data processing as incompatible with the core value proposition of a private NAS.

What Security Provisions Have Synology Put in Place?

Synology’s AI Console incorporates multiple layers of control to reduce the risks associated with transmitting data to third-party AI providers. API keys for connected AI services are stored locally on the NAS rather than in the cloud, and all requests are sent directly from the device to the selected AI provider. Administrators can remove these keys at any time, immediately severing the connection. The system allows AI access to be enabled or disabled at the package level, with the option to exclude specific users or groups entirely. To prevent uncontrolled consumption, administrators can set token rate limits per user, measured either per minute or per day. Transaction logs record each AI request with details such as timestamp, source IP address, user account, API model used, and token usage, while admin logs document any configuration changes. This creates a verifiable audit trail for compliance and internal review.

Key security provisions include:

• Local storage of API keys, with no cloud-based key management.

• Direct communication between the NAS and the AI provider, bypassing Synology’s own servers.

• Ability to revoke API access instantly by deleting stored keys.

• Per-package AI enable/disable controls, with user and group-level exclusions.

• Token rate limiting to control per-user API usage.

• Detailed transaction logs for all AI requests.

• Administrative logs for configuration changes.

• Optional logging of request inputs and outputs for auditing.

For added privacy, Synology offers a de-identification feature that can mask selected categories of sensitive data before they are transmitted to the AI provider, restoring the original information once the processed output is returned. This feature can identify and anonymise common identifiers such as names, email addresses, IP addresses, banking details, and various country-specific personal or business numbers. De-identification relies on a combination of AI-driven semantic analysis and predefined regular expression rules, giving administrators control over which data types are masked. It requires the installation of the Container Manager package and a minimum of 8 GB of RAM, with each enabled language model consuming roughly 1 GB of memory. Although Synology notes that de-identification cannot guarantee 100% masking, the mechanism is intended to significantly reduce the chance of exposing sensitive details during AI processing.

Synology Mail Plus and AI Console Integration

When enabled for Synology MailPlus, the AI Console provides a set of functions aimed at improving email efficiency through automated text processing. Within the MailPlus interface, users can generate short or detailed summaries of incoming emails, which can help quickly assess lengthy messages without reading them in full. The AI assistant can also draft replies based on user instructions, with options to adjust tone, length, and formality, or translate the response into a supported language. All AI processing is text-based, with attachments excluded from transmission to the AI provider. The system also supports “Help me write” prompts directly within the reply editor, allowing for quick generation of tailored responses that can be inserted and then edited before sending. Importantly, these capabilities are only available to users granted AI permissions by the administrator, and all actions are recorded in transaction logs for review.

The integration offers multiple editing refinements, including making a message more formal or casual, shortening or lengthening text, and translating to or from languages supported by the connected AI model. Users can also rephrase replies entirely or request alternative drafts. Although these capabilities are similar to features found in other email platforms that integrate AI, the implementation within MailPlus is designed to remain under the control of the NAS administrator, with optional de-identification masking personal data before it is sent to the provider. Responses are generated by the third-party AI service configured in AI Console, and processing occurs only when the user explicitly invokes an AI function, avoiding any automated sending of content without user action.

From a functional perspective, MailPlus AI integration is targeted primarily at professional or business environments that run their own Synology-hosted mail server. It can streamline response drafting, reduce time spent on routine communication, and support multilingual correspondence. However, the scope is currently limited to text-based tasks, with no AI-driven attachment analysis, advanced categorisation, sentiment detection, or automated email sorting included. The feature set also lacks customisable style profiles beyond the basic tone and length adjustments, meaning more specific brand or sector language must still be applied manually. The value for each organisation will depend on how frequently staff interact with longer, more complex emails, and whether the trade-off of involving an external AI service aligns with internal data handling policies and compliance requirements.

Synology Office and AI Console Integration

In Synology Office, AI Console integration extends across the suite’s document, spreadsheet, and presentation tools, embedding AI-assisted functions within the existing editing interface. In documents, the AI assistant can summarise entire files, rewrite selected sections, adjust tone, translate content, or improve grammar. These actions can be applied either through a right-click contextual menu or via a dedicated AI sidebar that displays results alongside the original content. Users can choose to insert AI-generated revisions directly into the file or keep them separate for manual comparison. The system maintains Office’s existing version history, meaning any AI-driven edits can be rolled back without data loss.

In spreadsheets, the integration is aimed at assisting with formula comprehension and basic data interpretation. Users can request explanations of specific formulas, generate new formulas from plain-language prompts, or run simple calculations without manually writing functions. The AI can also produce summaries of table data, although its analytical depth is limited compared to dedicated business intelligence tools. As with documents, processing is restricted to text-based content; the system does not transmit embedded images or charts to the AI provider. Administrators can control whether AI features are available in spreadsheets, allowing them to be enabled for certain user groups while remaining disabled for others.

For presentations, the AI can refine slide text, translate content, or expand bullet points into fuller sentences, making it useful for producing alternate versions of existing material. The functionality mirrors what is available in documents, with tone and length adjustments as well as grammar checks. However, it does not currently create entirely new slide decks or visual layouts from prompts. The processing workflow remains the same across all Office formats: only when a user explicitly triggers an AI action is the relevant text sent to the configured provider, and all requests are recorded in the AI Console’s transaction logs.

Overall, the Synology Office integration offers consistent AI tools across its core applications, focusing on editorial and language-based support rather than data-driven automation. While the scope is narrower than AI-enabled features in some third-party office suites, the implementation maintains administrative control and allows for selective deployment, making it adaptable to environments where privacy considerations limit the use of external services.

What Features of AI/LLM Are Not Present?

Although the Synology AI Console brings AI-assisted functions to MailPlus and Office, it does not provide the same breadth of capabilities found in some competing platforms. There is no locally hosted AI model option, meaning all processing is dependent on a live connection to a third-party provider. As a result, the system lacks offline functionality, GPU-accelerated local workloads, or support for running open-source LLMs within the NAS environment. In practical terms, this means that all AI operations involve external processing, which may not suit users who require fully on-premises data handling.

Beyond the infrastructure level, several functional gaps remain. The integration does not extend to all DSM applications, omitting areas such as File Station, Photo Station, Synology Photos, and Surveillance Station. Within MailPlus and Office, the AI features are focused on text editing and basic summarisation rather than broader automation. There is no built-in capability for sentiment analysis, advanced data analytics, automatic categorisation, or content generation from large datasets. Similarly, the AI Console does not currently allow multi-step task automation or integration with custom scripts, limiting its use to predefined actions within the supported productivity tools.

Is Synology AI Console Safe?

From a technical and administrative perspective, Synology has implemented several measures to protect data when using the AI Console. API keys are stored locally on the NAS, and requests to AI providers are sent directly from the device rather than passing through Synology-operated servers. Administrators can limit access to specific packages, exclude selected users or groups, set token usage caps, and monitor all AI interactions through detailed logs. For additional privacy, the optional de-identification feature can mask sensitive details such as personal identifiers, banking information, and IP addresses before prompts are transmitted, restoring them only after the AI provider returns a response.

However, the safety of the AI Console ultimately depends on the chosen AI provider and the user’s own policies. All processing occurs on the provider’s infrastructure, meaning data leaves the local network whenever AI features are used. Even with encryption and masking in place, this external dependency may be unacceptable in environments with strict regulatory requirements or where complete local control is mandatory. While Synology provides the tools to minimise risk and monitor usage, it is the administrator’s responsibility to select a compliant provider, configure de-identification appropriately, and ensure that AI features are only enabled where the security implications are fully understood.

Here is my video on the original reveal of AI Integration/Connection into Synology DSM when it was first shown off during the Synology Solution Exhibition back in 2023 in Taipei:

Join Inner Circle

Want to follow specific category? Also Read...Week 33 Tech Roundup – TerraSynology AI Console Review - GDS1825+ vs DXP8800 PLUS NAS - Synology DS1825+ vs UGREEN DXPWeek 31 Tech Roundup – 245TBUsing Unverified HDD/SSD on a How to Use Unverified HDDs andSynology DS425+ NAS ReviewSynology DS225+ NAS ReviewSynology DS425+ NAS Review - S Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Should You Buy the Terramaster F4 SSD NAS?

The TerraMaster F4 SSD is a 4-bay all-flash NAS aimed at home and prosumer users who want compact, quiet, and high-speed network storage based on SSD technology. Priced at $399, it represents the third entry in TerraMaster’s SSD-focused lineup, positioned below the larger 8-bay F8 SSD and the i5-powered F8 SSD Plus. This model is designed to deliver a balance between affordability and performance, featuring the Intel N95 quad-core processor, 8GB of DDR5 memory (upgradeable to 32GB), and four M.2 NVMe SSD slots across mixed-speed PCIe lanes. While its architecture targets lower power consumption and silent operation (rated at 19 dB in standby), it also integrates a 5GbE network port, USB 3.2 connectivity, and a toolless design to ease deployment. Designed for both turnkey usage with TerraMaster’s TOS 6 OS or as a flexible bare-metal option for TrueNAS or UnRAID, the F4 SSD sits at a crossroads between convenience and configurability—providing users with both preconfigured software and open-ended potential for third-party operating systems.

Terramaster F4 SSD NAS Review – Quick Conclusion

The TerraMaster F4 SSD delivers a compelling package for users seeking an affordable, compact, and all-flash NAS solution with a strong blend of performance and usability. Its toolless, space-saving design makes installation easy, while the inclusion of four M.2 NVMe slots—two at PCIe 3.0 x2 and two at x1—offers fast storage potential, albeit with some asymmetry that could affect RAID performance in certain configurations. Powered by the efficient Intel N95 CPU and 8GB of DDR5 memory, the system supports multimedia streaming, Docker containers, virtual machines, and AI-powered photo indexing, all handled by the continually improving TOS 6 operating system. Key strengths include the 5GbE networking for faster data access, support for mixed-capacity SSDs via TRAID, and very low noise and power consumption, making it ideal for home environments. However, limitations such as the single network port with no redundancy, lack of ECC memory support, and the presence of mixed-speed NVMe slots may be off-putting to power users or small businesses seeking higher resilience and uniform throughput. Still, at $399, the F4 SSD offers a well-rounded balance of speed, features, and ease of use for home users, prosumers, and content creators who want SSD-level performance without the complexity or cost of higher-end systems.

SOFTWARE - 7/10

HARDWARE - 8/10

PERFORMANCE - 7/10

PRICE - 9/10

VALUE - 9/10

8.0

PROS

Compact, toolless chassis with easy-access thumb screw and SSD installation
All-flash NVMe architecture with support for four M.2 2280 SSDs
5GbE network port enables high-speed local and remote transfers
TRAID and TRAID+ allow mixed-capacity SSDs and seamless storage expansion
TOS 6 OS includes Plex, Jellyfin, Docker, VM support, and AI photo indexing
Quiet operation (19 dB) and low power usage (32W under load)
Priced competitively at $399 for a turnkey SSD NAS

CONS

Single 5GbE port with no failover or link aggregation
Two of the four SSD slots are limited to PCIe Gen3 x1, creating potential RAID bottlenecks
Non-ECC DDR5 memory may not meet strict data integrity requirements

Where to Buy a Product
			VISIT RETAILER ➤
			VISIT RETAILER ➤

Terramaster F4 SSD NAS Review – Design and Storage

The TerraMaster F4 SSD adopts a compact, minimalist design that is clearly optimized for silent, flash-only operation. Measuring just 138mm x 60mm x 140mm and weighing 0.6 kg, it is one of the smallest 4-bay NAS chassis on the market, aided by its exclusive use of M.2 NVMe SSDs instead of traditional 3.5-inch hard drives. This all-flash design allows the chassis to maintain a reduced footprint while still offering significant internal capacity—up to 32TB using four 8TB drives. The unit features a clean, industrial aesthetic with smooth surfaces and subtle branding, aligning with TerraMaster’s recent design choices in their SSD NAS series. Importantly, the internal layout supports top-to-bottom convection airflow, with side ventilation and smart fan controls designed to balance cooling and acoustics.

Installation is clearly a design priority here. The F4 SSD uses a toolless construction held together by a single thumbscrew, allowing the user to remove the outer casing in seconds. Internally, SSDs are inserted via a pull-out drawer mechanism with dedicated mounting trays, and there’s ample clearance around each M.2 slot for installing large passive heatsinks.

Notably, the SSD slots are laid out in such a way that their orientation lines up directly with the two 50mm rear fans. These fans are positioned to channel airflow across both the SSDs and the large passive heatsink mounted over the Intel N95 CPU, ensuring that even under sustained workloads the thermals remain controlled without relying on noisy active cooling systems.

The internal storage configuration is somewhat mixed in terms of interface speed. Of the four M.2 slots, two operate over PCIe 3.0 x2 lanes, and two are limited to PCIe 3.0 x1. This introduces a disparity in potential transfer speeds—approximately 1.6GB/s per drive for the faster pair, and around 700-900MB/s for the slower ones.

While this approach is a practical trade-off due to CPU lane limitations, it may pose bottlenecks in RAID scenarios where all four drives are used in a single pool. However, for users willing to configure their SSDs into two independent volumes, or who rely on TerraMaster’s TRAID system with mixed-capacity drives, the system can still make efficient use of available bandwidth.

The F4 SSD supports a range of RAID configurations including TRAID, TRAID+, RAID 0, 1, 5, 6, and 10, as well as JBOD and single-drive modes. TRAID, TerraMaster’s hybrid RAID system, is especially notable here as it supports storage expansion using drives of different sizes—an advantage for users who plan to incrementally upgrade their SSDs over time. This flexibility is rare in entry-level NAS units, and helps avoid the traditional pitfalls of having to replace all drives at once in standard RAID arrays. The software layer automatically calculates parity and adjusts volume size without requiring complete data migration or reconfiguration.

From a practical perspective, the move to SSD-only architecture enables faster access times, reduced power usage, and significantly lower noise. TerraMaster reports a typical power draw of just 32W under full load with four SSDs, around 11-13W with all 4 SSD in a ‘read state’ with the CPU at sub 5%, and only 8W in complete hibernation. The fan noise sits below 19dB during idle operation, placing it among the quietest NAS units available. For environments such as living rooms or bedrooms where noise sensitivity is key, this silent thermal design makes the F4 SSD particularly well-suited for home multimedia centers and always-on photo backup servers.

Terramaster F4 SSD NAS Review – Internal Hardware

At the heart of the TerraMaster F4 SSD is the Intel N95 processor, a quad-core, four-thread CPU based on the Alder Lake-N architecture. Clocked at a base frequency of 1.7GHz with a boost up to 3.4GHz, it offers efficient processing power with a low 15W TDP, which contributes to the unit’s low thermal output and power consumption. While not designed for heavy computational workloads, the N95 supports Intel Quick Sync for hardware-accelerated video transcoding and includes integrated UHD graphics capable of handling 4K@60Hz decoding.

This makes the F4 SSD suitable for multimedia servers like Plex or Jellyfin, which are supported out of the box by TerraMaster’s TOS operating system. The CPU also provides nine PCIe Gen3 lanes for connecting NVMe drives, network interfaces, and USB ports—something that TerraMaster appears to have carefully balanced across components.

The system is equipped with 8GB of DDR5 memory pre-installed in a single SODIMM slot, with support for up to 32GB. The memory is non-ECC, which is expected for this price bracket and CPU class, though some users may view this as a drawback in data-critical environments. DDR5 support is a notable inclusion, offering higher bandwidth and lower power consumption than DDR4.

Because there is only a single memory slot, upgrades require replacing the pre-installed module entirely, but access is straightforward thanks to the removable chassis design. Combined with the N95 CPU and SSD storage, the memory allows for lightweight virtualization, Docker container deployment, and simultaneous access by multiple users—within the limitations of the CPU’s architecture.

Internally, the F4 SSD supports four M.2 2280 NVMe drives: two connected via PCIe 3.0 x2, and two via PCIe 3.0 x1. This setup is a direct consequence of the limited PCIe lane count on the N95 CPU, and reflects a compromise between cost and performance. While this layout means that users may encounter performance bottlenecks if building a single RAID array across all four slots, TerraMaster’s OS allows for flexible configuration, including the creation of separate volumes. The system also includes a substantial heatsink on the CPU and aligns airflow directly over both the CPU and storage bays. Together, these components form a power-efficient, quiet, and competent NAS platform optimized for SSD workloads.

Terramaster F4 SSD NAS Review – Ports and Connections

The TerraMaster F4 SSD is equipped with a practical selection of ports that reflect its mid-tier positioning. The standout feature is a single RJ-45 5GbE Ethernet port, offering five times the bandwidth of standard Gigabit connections and double that of 2.5GbE. This enables significantly faster file transfers when paired with compatible switches or direct-to-PC connections, making it a viable solution for photo and video editing over the network. However, the inclusion of only one network port—without redundancy or support for link aggregation—limits failover options and prevents more advanced networking setups, a drawback that may be felt in business or multi-user deployments. Users seeking dual LAN ports for redundancy or trunking will need to resort to USB-to-Ethernet adapters, which are supported via the system’s high-speed USB 3.2 ports.

In addition to its network interface, the F4 SSD features three USB 3.2 Gen 2 ports rated at 10Gbps each—two Type-A and one Type-C. These ports support a variety of functions, including attaching external storage for backups, connecting USB-based 2.5GbE/5GbE adapters, or even interfacing with uninterruptible power supplies (UPS). This level of connectivity is somewhat uncommon in compact SSD NAS systems and adds useful flexibility, particularly for users operating the unit as a personal cloud or remote access point. Notably absent, however, are legacy USB 2.0 ports or additional network expansion slots (such as PCIe or SFP+), which would have extended the F4 SSD’s upgradeability for more advanced users.

On the display side, the NAS includes a single HDMI 2.0b port, allowing for direct output of its graphical interface or multimedia playback, though this feature is seldom used in headless NAS operation. Still, its presence supports limited desktop use cases or direct-attached displays for VM consoles and Docker GUIs. Internally, the Intel N95 CPU provides up to three display outputs, but only one is exposed in this system. The absence of a VGA port, PCIe expansion slots, or front-facing ports keeps the design clean but does reduce options for advanced customization. Ultimately, the F4 SSD provides just enough I/O for mainstream home or small office use, while intentionally leaving out more enterprise-grade connectivity.

Terramaster F4 SSD NAS Review – TOS Software and Services

The TerraMaster F4 SSD ships with TOS 6, the company’s latest revision of its NAS operating system. TOS 6 has matured significantly compared to earlier versions, now offering a more stable and responsive interface with support for modern NAS functionality. The OS features a multi-window desktop-like environment accessible via browser, along with mobile and desktop clients for streamlined access.

The interface, though less polished than Synology’s DSM, has seen improvements in usability, with clearer organization of applications, settings, and user tools. Key system features include centralized backup, file indexing, user/group controls, and integrated snapshot functionality for shared folders and iSCSI volumes. For home users and prosumers, these updates represent a notable step forward, especially when paired with the low latency benefits of SSD storage.

Among TOS 6’s more prominent features is TRAID (TerraMaster RAID), a hybrid RAID system designed to offer flexible storage expansion and mixed-capacity drive support. Similar in principle to Synology’s SHR, TRAID allows users to start with a small number of SSDs and expand later with larger ones without reconfiguring the entire array.

This flexibility is especially useful in all-flash systems where high-capacity SSDs can be cost-prohibitive to install all at once. In addition to TRAID and TRAID+, the system also supports traditional RAID levels (0, 1, 5, 6, 10), JBOD, and single-drive configurations. Volume expansion, RAID migration, SSD TRIM, and S.M.A.R.T. monitoring are supported natively, along with scheduled snapshots and USB-based backups.

TOS 6 includes a growing suite of first- and third-party applications that address multimedia, surveillance, and cloud connectivity. The F4 SSD supports Plex Media Server, Jellyfin, Emby, and TerraMaster’s own Multimedia Server for DLNA/UPnP streaming. Users can also deploy Docker containers, virtual machines, and network services such as iSCSI, FTP, WebDAV, and VPN servers.

Multimedia support is further bolstered by hardware-accelerated 4K video decoding via the Intel UHD iGPU, making the NAS suitable as a home media hub. AI photo indexing is also integrated into Terra Photos, allowing automated categorization of people, pets, and scenes. For mobile users, the TNAS app offers automatic photo/video uploads and remote file access, enhancing backup automation and content management.

Enterprise and security features are present but modest. TOS 6 includes AES-encrypted folders, SSL certificate import, two-factor authentication, and alerting via email or desktop notifications. Integration with AD domains and LDAP clients is supported, but ECC memory is not, reflecting the system’s home and small-office focus. Additional cloud integration is provided via CloudSync, which supports Google Drive, OneDrive, Amazon S3, Dropbox, Baidu, and Alibaba Cloud.

For users requiring simple hybrid-cloud backups or syncing across multiple platforms, this unified interface is functional and sufficient. While TOS lacks the enterprise depth of some competing NAS platforms, its overall range of applications and services is now competitive for most home or light professional needs.

Terramaster F4 SSD NAS Review – Verdict and Conclusion

The TerraMaster F4 SSD presents itself as a well-considered entry into the compact, all-flash NAS segment, balancing low noise, energy efficiency, and competitive performance at a sub-$400 price point. With its fanless NVMe-based design, Intel N95 quad-core processor, and DDR5 memory, it meets the essential needs of home and small office users looking for a reliable and responsive storage solution. The inclusion of TerraMaster’s increasingly capable TOS 6 operating system, featuring AI-driven photo management, centralized backup, and Docker/VM support, makes it more than just a network storage device—it becomes a lightweight but versatile data center for the home. Its TRAID support allows for mixed SSD deployments with easy expansion, which is particularly attractive to users upgrading gradually or working within budget constraints. The thoughtful internal layout and cooling also ensure performance remains consistent even under sustained load, without sacrificing the near-silent operation.

However, the F4 SSD is not without caveats. The use of a single 5GbE port, without redundancy or aggregation, may deter users requiring network failover or higher throughput for simultaneous operations. Additionally, although the PCIe lane allocation strategy maximizes the N95’s limited bandwidth, the asymmetry between Gen3 x2 and x1 slots could bottleneck RAID performance depending on how volumes are configured. When compared to the larger F8 SSD or DIY options with dual 10GbE or ECC support, the F4 SSD may feel limiting to power users or business environments with stricter reliability requirements. That said, for the vast majority of home users, content creators, and prosumers looking for an all-in-one, high-speed NAS that blends well into living spaces, the F4 SSD delivers a solid and accessible solution. Its price-to-performance ratio, combined with the simplicity of deployment and maturing software ecosystem, makes it a compelling option in the growing market of SSD NAS devices.

Join Inner Circle

Want to follow specific category? Also Read...Week 33 Tech Roundup – TerraTerramaster D1 SSD ReviewTerramaster D4 SSD USB4 Box ReTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewTerramaster F4 SSD NAS ReviewTerramaster Prime Day 2025 - ATerramaster Prime Day 2025 - ASynology vs Terramaster NAS - Synology vs Terramaster in 202 Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

N7 AMD 8845HS 2x 10GbE NAS Motherboard Review

The MINIROUTE N7 NAS motherboard, also sold under the CWWK brand, is a compact Mini-ITX board built around the AMD Ryzen 8845HS processor, targeting power users and professionals seeking a dense, high-performance platform for NAS or compact server deployments. With its Zen 4 architecture, integrated AMD Ryzen AI NPU (delivering up to 16 TOPS), and 8-core/16-thread configuration, the board aims to bridge the gap between consumer-grade ITX systems and commercial turnkey NAS solutions. It supports up to eight SATA drives via dual SFF-8643 ports, offers dual 10GbE RJ45 connections using Aquantia AQC113 controllers, and features modern expansion options including PCIe Gen 4, USB4 (40Gbps), and dual NVMe M.2 slots. The system is designed to accommodate DDR5 SO-DIMM memory up to 96GB (2×48GB), and includes support for triple 4K/8K video output. With a retail price of around $489–$509 depending on configuration, the N7 represents a fully DIY-focused solution, delivering a dense hardware feature set for users willing to assemble and fine-tune their own NAS stack. This review evaluates its physical design, storage implementation, hardware layout, connectivity, system performance under various workloads, and its broader viability as a platform for UnRAID, Proxmox, or ZimaOS deployments.

N7 AMD 2x 10GbE NAS Motherboard Review – Quick Conclusion

The MINIROUTE N7 (also marketed under the CWWK brand) delivers an unusually comprehensive blend of performance, connectivity, and storage capacity within the compact constraints of a Mini-ITX form factor, positioning it as one of the most capable motherboards in the DIY NAS and small-server market segment. Centered around the AMD Ryzen 8845HS processor, it provides 8 high-performance Zen 4 cores and 16 threads, along with full PCIe Gen 4 support, dual independent 10GbE RJ45 ports, native 8-bay SATA connectivity via SFF-8643, and dual M.2 NVMe slots running at full PCIe 4.0 ×4 speeds. This combination allows users to build a system capable of high-throughput file sharing, virtualized infrastructure, Docker containers, multimedia handling, and even AI-enhanced workloads if supported by the chosen software environment. Its inclusion of USB4 (40Gbps), bifurcation-ready PCIe x16 slot, and triple display outputs (HDMI, DisplayPort, USB-C with DP Alt Mode) gives it rare versatility, allowing it to serve simultaneously as a NAS, hypervisor, and local-access media or control interface. These features, delivered without the need for PCIe add-in cards or external HBA controllers, simplify the build process and reduce total system cost when compared to equivalent prebuilt systems or workstation boards.

However, these strengths come with notable considerations. The board’s baseline power consumption is significantly higher than what one might find in ARM-based or low-power x86 embedded solutions, and thermals can become a concern under sustained load unless paired with an appropriate LGA1700-compatible cooler and adequate case airflow. Official ECC memory support is absent, which may limit its suitability for enterprise deployments requiring strict data integrity, even though ECC modules are detected in BIOS and several Linux-based NAS OS environments. The SFF-8643 connectors, while efficient and space-saving, add complexity for first-time builders who are unfamiliar with breakout cables or SAS-style drive setups. Despite this, experienced users will find the trade-offs acceptable in light of the raw capability the board offers. Whether you’re deploying TrueNAS SCALE with multiple VMs, using Proxmox for containerized services, or running UnRAID with GPU pass-through and AI indexing, the N7 provides enough bandwidth, I/O, and compute power to support demanding workloads in a footprint small enough to fit in virtually any modern NAS enclosure. For builders who prioritize flexibility, performance, and dense integration over energy efficiency or plug-and-play simplicity, the N7 emerges as one of the most forward-looking DIY NAS platforms currently available.

BUILD QUALITY - 9/10

HARDWARE - 9/10

PERFORMANCE - 8/10

PRICE - 8/10

VALUE - 8/10

8.4

PROS

High-Performance CPU: Ryzen 8845HS offers 8 cores, 16 threads, and strong single/multi-thread performance suitable for VMs and containers.
Dual 10GbE Ports: Independent 10GbE NICs with full PCIe Gen 4 ×1 allocation allow high-throughput networking without contention.
Support for 8 SATA Drives: Native 8-bay SATA support via dual SFF-8643 eliminates the need for add-on HBA cards in most NAS builds.
Dual NVMe Gen 4 Slots: Two M.2 2280 slots support full PCIe Gen 4 ×4 speeds for fast boot, cache, or tiered storage.
PCIe Gen 4 x16 Slot: Full-length slot with x8 signal and BIOS bifurcation enables GPU, RAID, or multi-NVMe card expansion.
USB4 Support: Includes one 40Gbps USB-C port for high-speed external storage or passthrough options in advanced OS setups.
Triple Display Outputs: HDMI, DisplayPort, and USB-C (DP Alt Mode) support up to 8K for local GUI or media server applications.
Compact ITX Layout: All features integrated into a 17cm × 17cm form factor, compatible with standard NAS and SFF cases.

CONS

No Official ECC Support: ECC DIMMs are detected but error correction is unverified, limiting its appeal in critical data environments. (correction, 8845HS Pro CPU DOES support ECC, not this one)
Moderately High Power Consumption: Idle power (~25W) and load (>60W) exceed typical low-power NAS boards, requiring active cooling.
SFF-8643 Complexity: Requires breakout cables and familiarity with SAS-style connectors, which may confuse first-time NAS builders.

N7 AMD 2x 10GbE NAS Motherboard Review – Design and Storage

The MINIROUTE N7 adheres to the Mini-ITX standard with a footprint of 17 × 17 cm, making it compatible with a wide range of compact NAS and SFF (Small Form Factor) enclosures. Despite its small size, the board manages to integrate an unusually dense set of components, routing power and data traces efficiently around the central CPU socket and key interface headers. The board requires both a standard 24-pin ATX and 4-pin CPU power connector, which is a practical choice for users reusing off-the-shelf ATX PSUs. The component layout is designed for vertical airflow, which aligns well with tower-style NAS chassis using top-down cooling. Passive heat dissipation is supplemented by a large copper heatsink preinstalled over the CPU and chipset area, although users will need to add a compatible LGA1700 cooler for effective thermal management in prolonged workloads.

Drive connectivity on the N7 is handled via two onboard SFF-8643 ports, each supporting up to four SATA 3.0 devices through breakout cables. These mini-SAS connectors route through onboard ASMedia ASM1164 controllers and offer up to 6Gbps per port, enabling up to eight storage devices across a single board without the need for a separate HBA card. Each SFF-8643 port is linked to a PCIe Gen 3 x1 lane, which limits peak throughput to just under 1GB/s per group of four drives.

While this isn’t a bottleneck in typical NAS workloads involving sequential reads/writes from hard drives, it may constrain performance with large SSD arrays or heavy mixed IOPS usage. Included in the box are two breakout cables for converting the 8643 ports to 4 × SATA each, streamlining setup and making the N7 more appealing for users assembling 6- to 8-bay NAS systems without additional add-ons.

The N7’s decision to use SFF-8643 instead of individual SATA headers is a deliberate choice that favors a clean internal cable setup, particularly in compact NAS cases with limited clearance or rear-mounted drive cages. This design also supports the use of add-on expansion modules such as CWWK’s 6-bay carrier boards or U.2 and M.2 SATA-to-SFF adapters, adding deployment flexibility for those planning to use a mix of HDDs and SSDs.

During physical inspection and test installation, the SATA connectors routed cleanly to the front of the board, minimizing crossflow interference for cooling and allowing for unobstructed access to RAM and NVMe slots. This layout, while compact, doesn’t obstruct airflow or block RAM or PCIe slot access even when all drive connections are populated.

Storage expansion is also supported via two M.2 NVMe slots: one mounted on the top side of the board and one underneath. Both slots support 2280-length drives at PCIe Gen 4 x4 speeds, providing ample bandwidth for SSD caching or fast boot devices. These NVMe drives are independent of the SATA controller and do not share lanes with the PCIe or USB4 ports, according to observed behavior during SSD testing. Read speeds on Gen 4 drives approached 5.1 GB/s, while write speeds hovered around 4.6 GB/s under sequential workloads. Thermals for these slots will depend on case design and airflow, as there are no included heatsinks for the M.2 bays—something users building 24/7 systems will want to address through motherboard-side or chassis-side cooling accessories.

The storage layout and capacity potential make the N7 particularly well suited for software-defined storage platforms like TrueNAS SCALE, UnRAID, and ZimaOS. RAID arrays, SSD cache pools, and hybrid tiered storage setups can all be constructed using the eight SATA and two NVMe interfaces. Although bandwidth on the SFF-8643 links is limited compared to dedicated HBA cards, the simplicity and integration on a Mini-ITX board are notable advantages. For users building an 8-bay NAS that includes SSD-based caching or boot storage, the N7’s native options reduce both hardware complexity and overall build cost. The only notable storage-related limitation is the lack of support for hardware RAID or U.2 ports natively, but given its price and form factor, the board aligns well with the needs of most advanced DIY NAS builders.

N7 AMD 2x 10GbE NAS Motherboard Review – Hardware

At the center of the N7 motherboard is the AMD Ryzen 8845HS processor, a Zen 4-based 8-core, 16-thread CPU designed for high-efficiency performance in mobile and embedded systems. With a base clock of 3.8GHz and a maximum boost clock of 5.1GHz, this chip provides considerably more computational headroom than most processors found in pre-built NAS devices or ITX boards at this price point. Its multithreaded performance is particularly well-suited for tasks like virtualization, multi-user services, parallel Docker workloads, and software-defined storage management.

The CPU also integrates AMD’s Radeon 780M graphics engine, based on RDNA 3 architecture, with 12 GPU cores clocked at up to 2.7GHz, which is more than adequate for media playback, transcoding, or even light GPU-accelerated applications under supported environments.

Furthermore, the inclusion of the AMD Ryzen AI engine adds another dimension to its capabilities, offering up to 16 TOPS of local inference performance—opening the door for AI-driven surveillance, metadata tagging, and potentially video analytics if supported by the NAS OS or containers used.

Memory support is provided through two DDR5 SO-DIMM slots, with default 5600MHz support and capacity up to 48GB per stick, enabling a maximum of 96GB of RAM. This high memory ceiling is advantageous for power users running memory-intensive services such as RAM-cached storage, ZFS-based deduplication, large-scale container deployments, or multiple virtual machines. Although the board does not officially support ECC memory, testing on platforms such as UnRAID and ZimaOS showed that ECC modules are recognized and initialized, albeit without clear confirmation of active error correction.

Later investigation showed that the PRO version of the 8845HS CPU does in fact support ECC, whereas the standard 8845HS here does not – which is a shame that there is not a separate configuration that includes this CPU available from the brand at an additional cost for users who consider ECC support a ‘deal breaker’. The SO-DIMM slots are well-positioned and unobstructed, allowing for tool-free upgrades or swaps without removing other components, which is especially important given the compact ITX layout and potential space constraints in NAS enclosures.

What sets the N7 apart from most Mini-ITX NAS boards is its thoughtful PCIe lane distribution, which takes full advantage of the 20 available PCIe Gen 4 lanes provided by the Ryzen 8845HS.

The full-length PCIe slot operates at Gen 4 x8 by default, but also supports bifurcation into dual x4 via BIOS for users installing expansion cards like dual-NVMe adapters or multi-port network cards.

Each M.2 NVMe slot is also connected via a dedicated PCIe Gen 4 x4 lane, ensuring maximum bandwidth of up to 8GB/s for modern SSDs, without any shared bandwidth with SATA or network interfaces.

The two onboard 10GbE RJ45 ports are served by separate Aquantia AQC113C controllers, each connected via their own PCIe Gen 4 x1 link, giving up to 2GB/s per port and ensuring full-duplex throughput without crosstalk.

This dedicated lane allocation across network, storage, and expansion interfaces is rare in compact boards and critical for users seeking consistent performance under concurrent high-load scenarios like multi-user file access, SSD-based caching, and active VM hosting.

Category	Specification
Model	MINIROUTE N7 / CWWK N7 NAS ITX Motherboard
Form Factor	Mini-ITX (17 × 17 cm)
Processor	AMD Ryzen 8845HS (8 cores / 16 threads, Zen 4, up to 5.1GHz)
GPU	AMD Radeon 780M (12 cores, up to 2.7GHz)
AI NPU	AMD Ryzen AI Engine (up to 16 TOPS)
Chipset	SoC (Integrated, no discrete chipset)
Memory Support	2 × DDR5 SO-DIMM (up to 96GB total, 5600MHz, non-ECC officially)
M.2 Slots	2 × M.2 2280 NVMe (PCIe Gen 4 ×4 each; top + rear-mounted)
SATA Ports	2 × SFF-8643 (8 × SATA 6Gb/s total via included breakout cables)
SATA Controller	2 × ASMedia ASM1164 (PCIe Gen 3 ×1 each)
PCIe Slot	1 × PCIe x16 (Gen 4 ×8 signal; bifurcation to 2 × x4 supported)
Ethernet Ports	2 × 10GbE RJ45 (Aquantia AQC113C-B1, auto-negotiating 10/5/2.5/1GbE/100M)
USB Ports	1 × USB4 Type-C (40Gbps), 3 × USB 3.2 Gen1 (5Gbps)
Internal USB	1 × USB 3.0 header, 1 × USB 2.0 header, 1 × Type-E header
Audio	1 × 3.5mm combo audio jack
Display Output	1 × HDMI, 1 × DisplayPort, 1 × USB-C (Alt Mode); up to 8K supported
Power Input	24-pin ATX + 4-pin CPU
Cooling	Passive copper heatsink (LGA1700-compatible; cooler not included)
Package Includes	2 × SFF-8643 to 4×SATA cables, I/O shield, screws, warranty card

N7 AMD 2x 10GbE NAS Motherboard Review – Ports and Connections

The MINIROUTE N7 motherboard delivers a well-rounded set of connectivity options, with a clear emphasis on high-speed networking and data transfer—features that are increasingly essential in modern NAS environments. Dominating the rear I/O are two 10GbE RJ45 ports, each backed by an Aquantia AQC113C-B1 controller and connected via independent PCIe Gen 4 ×1 lanes. This design ensures that each network interface operates without contention, allowing for sustained full-duplex bandwidth on both ports simultaneously.

The ports support all major Ethernet standards from 100M up to 10Gbps, enabling the board to adapt to diverse infrastructure including SMB networks, prosumer switches, and enterprise environments with 10GBase-T. For users setting up link aggregation (LACP), isolated network zones (i.e., separation of iSCSI and SMB), or even point-to-point replication between servers, these dual interfaces offer deployment flexibility typically absent on most consumer-grade ITX boards. While copper 10GbE does introduce higher thermal output compared to SFP+, the choice improves compatibility for users relying on standard RJ45 cabling and avoids the cost of optical transceivers.

On the USB front, the N7 integrates a versatile mix of legacy and next-generation interfaces to accommodate a range of peripheral scenarios. The single USB4 Type-C port supports up to 40Gbps data throughput, enabling fast access to NVMe-class external storage or high-resolution display output via DP Alt Mode. It also opens the door for emerging use cases such as external GPU enclosures, dock expansion, or USB4-to-10GbE adapters—particularly valuable for users running Linux distributions like ZimaOS or Proxmox, where hardware passthrough and device mapping are becoming more accessible.

Three additional USB 3.2 Gen1 (5Gbps) Type-A ports are located on the rear I/O and work as expected for more common devices like USB storage drives, UPS interfaces, or external backup systems. Internally, the board offers a USB 3.0 header for front-panel case ports, a USB 2.0 header for basic boot/recovery drives, and a Type-E header compatible with front-panel USB-C or TPM modules. During testing, USB Ethernet dongles including Realtek-based 2.5GbE and 5GbE models were recognized immediately under supported NAS OS environments, and native USB boot was stable across ZimaOS, UnRAID, and TrueNAS.

Display and peripheral audio output are also included, which broadens the board’s versatility beyond a pure headless NAS application. The board features three display output options: HDMI, DisplayPort, and USB-C via DP Alt Mode, all of which are powered by the integrated Radeon 780M GPU. These outputs can drive up to three displays concurrently, with resolutions up to 4K on all three or up to 8K on select single-display configurations.

This makes the board suitable for tasks like media center builds, HTPC-NAS hybrids, or running direct-access GUIs for NAS software like UnRAID’s web dashboard or Proxmox’s virtual console. The inclusion of these outputs also benefits users setting up the board as a temporary workstation or using the NAS in roles that require visual monitoring, such as security recording or local video playback via Jellyfin. Finally, a 3.5mm combo audio jack is available for users needing direct analog audio output—for example, for alerts, monitoring systems, or simple desktop playback. While not essential for most server roles, these extras enhance the board’s adaptability for multi-role deployments.

N7 AMD 2x 10GbE NAS Motherboard Review – Heat, Power and Speed Tests

The N7 motherboard, powered by the Ryzen 8845HS, exhibits performance characteristics closer to high-end desktop platforms than typical NAS or embedded ITX systems. Under idle conditions with no SATA drives connected, the system consumed around 25W of power—measured with the CPU utilization below 5%, one 10GbE port active but unused, and two NVMe SSDs idle. This baseline power draw is significantly higher than what one would expect from Intel N-series or low-wattage embedded solutions, but within expectations for an 8-core Zen 4 processor with multiple PCIe 4.0 devices powered.

During light workloads—such as file transfers, basic Docker container activity, and periodic system logging—power consumption rose to 35–40W, depending on active network interfaces and connected USB peripherals. Once under sustained load, such as running active VMs, accessing both NVMe drives simultaneously, and saturating both 10GbE ports, power consumption reached 62–64W, and could climb higher when SATA HDDs were connected. With full 8-bay drive setups, users should expect total system draw to increase by an additional 40–80W depending on drive type and workload.

Thermal performance remained acceptable, but adequate cooling is essential. The preinstalled copper heatsink provides passive thermal coverage over the SoC, but a dedicated LGA1700-compatible active cooler is required for stable operation. During high CPU utilization tasks (including transcoding and virtualized workloads), the Ryzen 8845HS reached 75–85°C using a standard Jonsbo low-profile air cooler in a ventilated test chassis. NVMe thermals also hovered between 55–65°C under sustained read/write conditions, especially in the rear-mounted slot with limited airflow.

While the chipset and PCIe controllers did not show signs of throttling, compact case designs with poor airflow could reduce long-term reliability unless additional ventilation or targeted airflow is introduced. Thermal probes placed near the SFF-8643 headers showed localized warmth, but no hotspots significant enough to warrant concern, assuming the system is housed in a well-ventilated NAS chassis.

In real-world bandwidth testing, both 10GbE ports were able to sustain near line-rate transfers using iperf3 and large file transfers via Samba and NFS. When paired with two PCIe Gen 4 NVMe SSDs, the system consistently achieved 5.0–5.1GB/s reads and 4.5–4.6GB/s writes under sequential file operations, using CrystalDiskMark and Linux-based fio. When both 10GbE ports were active and transferring simultaneously, total throughput approached 2.8–3.0GB/s across both interfaces, depending on storage configuration and NIC drivers.

The M.2 slots did not exhibit thermal throttling in short bursts, though write-heavy tasks over time may benefit from passive heatsinks or motherboard padding to manage drive temperatures. Notably, a minor anomaly was observed during direct SSD-to-SSD transfers within the system: despite both NVMe drives supporting Gen 4 x4, inter-drive transfers capped at ~900MB/s, suggesting a potential shared PCIe switch limitation or OS-layer bottleneck. However, this did not impact external transfer speeds or typical NAS operations.

For virtual machines and multimedia, the N7 showed strong capabilities. The Ryzen 8845HS handled 6 mixed windows and ubuntu simultaneous VMs with steady responsiveness and no observable instability in both Proxmox and UnRAID and could very easily have been scaled further, up to double figures with ease. CPU utilization remained below 60% during combined 6xVM and 2x 4K converted Jellyfin media playback testing. The integrated Radeon 780M GPU enabled smooth 1080p and 4K media playback using Jellyfin via hardware-accelerated rendering.

8K native playback was supported, though transcoding large 8K files pushed the CPU above 80% utilization, and real-time conversion proved unreliable. Light 4K transcoding was possible, though not as efficient as Intel Quick Sync or NVIDIA NVENC-based solutions. Still, for native playback and lightweight transcodes in a home or SMB setup, the board performs well. Combined with Docker and AI acceleration for metadata tagging or face recognition, the N7 can act as a capable hybrid NAS/media server platform when deployed with suitable software.

N7 AMD 2x 10GbE NAS Motherboard Review – Verdict and Conclusion

The MINIROUTE N7 (also known as the CWWK N7) establishes itself as one of the most functionally complete and performance-oriented Mini-ITX NAS motherboards currently on the market, delivering a dense hardware feature set typically reserved for much larger or more expensive systems. Featuring the AMD Ryzen 8845HS with Zen 4 architecture, dual 10GbE ports, PCIe Gen 4 expansion, and native support for up to eight SATA drives via onboard SFF-8643, the N7 is aimed squarely at users building serious NAS and virtualization setups from the ground up. The inclusion of dual NVMe slots, USB4 support, and bifurcation-ready PCIe x16 further positions this board as a future-ready platform for mixed storage, networking, and container workloads. Unlike many boards in this category, which sacrifice PCIe allocation or require additional HBAs for full drive connectivity, the N7 manages to deliver everything natively within a compact 17 cm × 17 cm layout. Compatibility with UnRAID, Proxmox, TrueNAS SCALE, and ZimaOS means that users have a wide selection of operating environments to choose from, whether prioritizing containerized applications, VM infrastructure, or ZFS-based data integrity.

However, the board’s capability comes with caveats that will be more apparent to experienced system builders. Idle and load power consumption are significantly higher than N-series Intel or ARM SoCs, which may not suit deployments aiming for low-energy, 24/7 operation with minimal thermal output. Thermal demands on the CPU and M.2 storage require effective active cooling, particularly in enclosed NAS cases with limited airflow. Officially, there is no ECC memory support, and although the board recognizes ECC DIMMs in BIOS and some operating systems, the absence of validated error correction will deter users in environments where data integrity is mission-critical. Additionally, while the SFF-8643 layout enables clean cabling for up to eight SATA drives, it assumes familiarity with breakout cables or SAS-style enclosures—potentially adding complexity for users migrating from consumer-oriented boards with standard SATA headers. That said, for advanced NAS builders, home lab enthusiasts, or small-scale professionals seeking a board that combines workstation-grade power, native 10GbE networking, and dense storage connectivity, the N7 represents a well-balanced and highly flexible foundation. Its price may be higher than entry-level ITX boards, but for those seeking high-throughput and virtualized workflows in a compact format, it is one of the most capable DIY platforms currently available.

Join Inner Circle

Want to follow specific category? Also Read...GL.iNet Comet Pro Review - TheGL.iNet Comet Pro ReviewTerramaster D1 SSD ReviewTerramaster D4 SSD USB4 Box ReTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewSynology AI Console ReviewSynology AI Console Review - GTerramaster F4 SSD NAS ReviewGMKTec G9 Ver.2 NAS Review - C Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Use Whatever Hard Drives or SSDs on Your Synology NAS (2025 Guide)

Note – there is a YouTube tutorial version of this guide HERE on the NASCompares YouTube Channel

Synology’s 2025 generation of NAS systems, such as the DS925+ and other Plus series models, introduced a more restrictive approach to drive compatibility. Unlike previous generations, these devices enforce a compatibility check that blocks or limits functionality when non-Synology hard drives or SSDs are used. As a result, users are unable to install DSM, create storage pools, or configure caching volumes using unverified drives. Even drives that work in earlier Synology models are now flagged as unsupported, resulting in persistent alerts or outright refusal to function. This guide provides a complete walkthrough for users who want to bypass those restrictions and enable full usage of third-party SATA and NVMe drives, including for pools, volumes, hot spares, and cache. It includes step-by-step instructions on how to install DSM with only unverified drives, how to remove system warnings, and how to automate the process for future updates or drive additions. The solutions here rely on trusted scripts developed by the Synology community and require minimal system modification, allowing users to regain control over their own hardware.

Special Thanks to Dave Russell

The ability to bypass Synology’s restrictive drive compatibility checks would not be possible without the extensive work of Dave Russell, widely known in the Synology community as 007revad. His GitHub project, Synology_HDD_db, is the basis for all the procedures outlined in this guide. The script he developed modifies DSM’s internal compatibility database, enabling full functionality for otherwise unsupported HDDs, SSDs, and NVMe drives. Dave has not only written and maintained this complex script, but also ensured that it works across different NAS models and DSM versions, including DSM 7.2 and newer. He continues to improve the tool in response to Synology firmware changes, regularly providing updates and extended options such as M.2 volume support and WDDA disablement. Users are strongly encouraged to consult the official GitHub repository, follow the provided documentation, and, where possible, support his ongoing work HERE, which remains freely available to the broader NAS community.

MASSIVE Disclaimer

Modifying your Synology NAS to allow the use of unverified drives is not officially supported by Synology. By applying the changes described in this guide, you will be altering system files and bypassing built-in compatibility checks within DSM. While these changes are reversible and have been widely tested, doing so may void your Synology warranty or affect your ability to receive technical support from the manufacturer, even in cases unrelated to storage. Additionally, although the script-based method described here is non-destructive and has proven safe for many users, there is always a minimal risk of issues following DSM updates or hardware changes. You should not proceed unless you have full backups of your data and are comfortable with SSH and terminal operations. This guide is intended for advanced users, system integrators, or home NAS enthusiasts who understand the risks and accept responsibility for operating outside of official Synology support channels.

How to Set Up a Synology NAS with No Drives Installed to Allow DSM Installation

Synology’s 2025 and later Plus-series NAS systems will not allow DSM installation if only unverified drives are present. However, it is possible to bypass this limitation and install DSM without using any Synology-branded or officially supported drives. The method involves enabling Telnet access and overriding the drive compatibility check during the DSM installation process.

Step-by-Step Instructions:

• Physically set up your NAS

  • Connect the NAS to your local network using Ethernet.

  • Ensure the device is powered on, even if no drives are installed or only unverified drives are present.

• Attempt initial DSM setup

  • Use Synology Assistant or go to http://find.synology.com to locate your NAS.

  • Proceed through the DSM installation wizard. You will likely encounter an error indicating that the inserted drive(s) are unsupported.

• Enable Telnet access

  • In a browser, navigate to:
    http://<NAS-IP>:5000/webman/start_telnet.cgi
    Replace <NAS-IP> with the actual IP address of your NAS.

• Connect via Telnet

  • Open a Telnet client like PuTTY.

  • Enter your NAS IP address and connect via Telnet.

  • When prompted, use:

    • Username: root

    • Password: 101-0101 (default for this Telnet interface)

• Bypass installation check

  • Enter the following command into the Telnet window:

    while true; do touch /tmp/installable_check_pass; sleep 1; done


  • This creates a temporary flag that bypasses the system’s compatibility verification loop.

• Return to the DSM install page

  • Refresh the browser window where you began the DSM setup.

  • DSM will now allow installation to proceed, even on unverified drives.

• Finish DSM setup

  • Complete the DSM installation.

  • Create your admin user account when prompted.

  • You can now access the full DSM interface.

Once DSM is installed, you can proceed to apply the permanent drive compatibility fixes, create storage pools, and remove warning banners—all covered in the next section.

How to Allow Unverified HDDs or SSDs to Be Used for Storage Pools, Volumes, and Caching (and Remove Warnings)

Once DSM is installed, unverified drives will still be blocked from creating storage pools, volumes, or caches. Even if the system boots, Storage Manager will display warnings or greyed-out options. To unlock full functionality, you must apply a community-developed script that updates DSM’s internal drive compatibility database. This section outlines how to download, apply, and validate that change.

Step-by-Step Instructions:

• Enable SSH on your NAS
  • In DSM, go to Control Panel > Terminal & SNMP > Terminal.
  • Enable SSH service and click Apply.

• Prepare SSH access
  • Use PuTTY (or your preferred SSH client) to connect to your NAS.
  • Log in using your DSM administrator username and password (not root at this stage).
• Create working directory
  • Once connected, elevate to root:

    sudo -i
    

  • Create the required folder:

    mkdir -m775 /opt
    cd /opt
    

• Download the required scripts
  • Run the following commands to download the latest versions directly from Dave Russell’s GitHub:

    curl -O "https://raw.githubusercontent.com/007revad/Synology_HDD_db/refs/heads/main/syno_hdd_db.sh"
    curl -O "https://raw.githubusercontent.com/007revad/Synology_HDD_db/refs/heads/main/syno_hdd_vendor_ids.txt"
    chmod 750 /opt/syno_hdd_db.sh
    

• Run the script
  • Execute the script to patch the drive database:

    /opt/syno_hdd_db.sh
    

  • The script will detect your NAS model, DSM version, and connected drives. It will then add those drives to the compatibility database and back up the original files.

• Check Storage Manager
  • Return to DSM’s Storage Manager.
  • If changes are not immediately visible, reboot your NAS.
  • You should now be able to create storage pools, volumes, and SSD caches with unverified drives, without warning messages.
• Optional: Disable compatibility warnings completely
  • To stop future drive alerts from DSM, you may also want to run:

    /usr/syno/bin/synosetkeyvalue /etc.defaults/synoinfo.conf support_disk_compatibility no
    

At this point, all third-party drives currently installed in the system will be fully usable and recognized as supported. The next section explains how to add additional unverified drives later and have them automatically accepted.

What to Do When Adding New HDDs or SSDs Later for Expansion, Replacement, or Hot Spares

After your initial setup and database modification, any newly added unverified drives will still appear as unsupported in DSM until they are explicitly added to the modified compatibility database. This section outlines how to safely introduce new drives for RAID expansion, hot spare assignment, or disk replacement without encountering blockages or warning messages.

Step-by-Step Instructions:

• Physically install the new drive(s)
  • Power down your NAS if required (for systems that don’t support hot-swapping).
  • Insert the new unverified HDDs or SSDs into available bays.
  • Power the NAS back on and log in to DSM.
• Check Storage Manager
  • Go to Storage Manager > HDD/SSD.
  • Newly added drives will appear but will be marked as “Not supported” or “Unverified.”
  • They will not be usable for volume expansion or as hot spares until added to the compatibility list.
• Reconnect via SSH
  • Use PuTTY or your SSH client to log into DSM with your admin credentials.
  • Elevate to root access:

    sudo -i
    

• Navigate to the working directory
  • Assuming you previously created /opt and stored the script there:

    cd /opt
    

• Run the update script again
  • This re-applies the database patch and includes newly inserted drives:

    ./syno_hdd_db.sh

1. Verify drive status
   • Go back to Storage Manager.
   • Refresh the page or reboot the NAS if needed.
   • The newly added drives should now appear as compatible and can be used for expansion, drive replacement, or assigned as hot spares.

This process can be repeated anytime new unverified drives are introduced. However, to avoid having to manually re-run the script every time, the next section covers how to set up a scheduled task that automates this during every system boot.

How to Set Up a Scheduled Task to Re-Apply the Fix on Every Reboot

Synology DSM updates or certain system operations can overwrite or reset the internal compatibility database, especially after version upgrades or service restarts. To ensure that unverified drives remain recognized and fully functional even after a reboot, you can configure a scheduled task that automatically re-applies the compatibility script at every startup.

Step-by-Step Instructions:

• Log in to DSM and open Task Scheduler
  • Go to Control Panel > Task Scheduler.
  • Click Create > Triggered Task > User-defined script.
• Configure the general settings
  • Task Name: Name it something descriptive like Drive Compatibility Patch.
  • User: Select root from the dropdown (this is essential for full system access).
  • Event: Select Boot-up so the script runs every time the NAS starts.
  • Leave Enabled checked.

• Set the script action
  • Click on the Task Settings tab.
  • In the User-defined script box, enter the following command:

    mkdir -m775 /opt
    cd /opt || (echo "Failed to CD to /opt"; exit 1)
    curl -O "https://raw.githubusercontent.com/007revad/Synology_HDD_db/refs/heads/main/syno_hdd_db.sh"
    curl -O "https://raw.githubusercontent.com/007revad/Synology_HDD_db/refs/heads/main/syno_hdd_vendor_ids.txt"
    chmod 750 /opt/syno_hdd_db.sh
    /opt/syno_hdd_db.sh -e
    

  • This ensures the script is always downloaded fresh and applied with the -e flag for compatibility with scheduled tasks and email output (if enabled).
• Optional email notifications
  • Still under Task Settings, you can enable email alerts to be notified if the script fails or terminates abnormally.
• Save and test
  • Click OK to save the task.
  • You can manually run the task to confirm it executes correctly.
  • Reboot the NAS to ensure the script is applied at boot and unverified drives remain fully usable.

This scheduled task ensures long-term reliability and reduces the need for manual intervention whenever DSM is restarted, updated, or new drives are introduced.

Synology’s decision to restrict drive compatibility in its 2025 and later NAS models has complicated matters for users who prefer flexibility in their storage choices. However, through a combination of Telnet access, SSH scripting, and community-built tools like Dave Russell’s syno_hdd_db.sh, it is entirely possible to restore full drive functionality—even when using completely unverified SATA or NVMe devices. By following the steps outlined in this guide, users can install DSM on unverified drives, create storage pools, use SSDs for caching, and expand or modify their RAID configurations without limitations. Setting up an automated scheduled task further ensures these capabilities persist through reboots and DSM updates. While Synology may eventually broaden official support, this method provides a reliable and reversible way to maintain full control over your hardware today.

Should You Buy the Synology DS925+ NAS?

In practical terms, the DS925+ is the stronger out-of-the-box choice, especially for users who value simplicity, improved default performance, and do not anticipate needing higher-than-2.5GbE networking down the line. However, the long-term value proposition becomes murkier when you factor in the DS923+’s PCIe expansion, broader drive compatibility, and the potential price drops that will follow its ageing status in Synology’s lineup. In short, the DS925+ is the better NAS on day one—more powerful, faster, and quieter. But if you’re planning for day 1,000, it’s worth pausing to consider whether the expandability and media flexibility of the DS923+ may be a better fit for your storage and networking needs over the next five to seven years.

Synology DS925+ NAS		Synology DS923+ NAS
Check Amazon in Your Region for the Synology DS925+ NAS	Check B&H for the Synology DS925+ NAS	Check Amazon in Your Region for the Synology DS923+ NAS	Check B&H for the Synology DS923+ NAS

Join Inner Circle

Want to follow specific category? Also Read...Week 33 Tech Roundup – TerraSynology AI Console ReviewSynology AI Console Review - GDS1825+ vs DXP8800 PLUS NAS - Synology DS1825+ vs UGREEN DXPTerramaster F4 SSD NAS ReviewGMKTec G9 Ver.2 NAS Review - CWeek 31 Tech Roundup – 245TBGMKTec G9 NAS (New Improved CoTerramaster F4 SSD NAS Review Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Synology DS225+ NAS Review – Should You Buy?

The Synology DS225+ is a 2-bay desktop NAS released in 2025 as a refresh to the DS224+, aimed at home users, remote workers, and small teams needing centralized storage, backup, and multimedia functionality. It retains the Intel Celeron J4125 processor, a quad-core chip with integrated graphics, and includes 2GB of DDR4 non-ECC memory soldered to the board, with an available slot to expand the total to 6GB. Connectivity consists of both a standard 1GbE port and a 2.5GbE port, along with dual USB 3.2 Gen 1 ports for external drives or UPS devices. The chassis is compact and passively efficient, consuming less than 17 watts under load and producing under 20 dB(A) of idle noise—well-suited for environments where silence and energy efficiency matter.

The DS225+ runs DSM 7.2, Synology’s proprietary NAS operating system, and supports the full catalog of Synology applications for backup, file sharing, collaboration, and even light virtualization. Users can take advantage of tools like Active Backup, Hyper Backup, Surveillance Station, Synology Drive, and Virtual Machine Manager, with support for Btrfs and SHR offering additional flexibility. While the DS225+ delivers a solid turnkey experience for typical NAS users, its dated CPU, limited upgrade path, and increasingly restrictive drive compatibility policy raise questions about long-term value and competitiveness in the current NAS landscape. This review will examine five key advantages that justify its place in the market—and five potential drawbacks that could sway buyers toward alternatives or delay a purchase.

SOFTWARE - 10/10

HARDWARE - 5/10

PERFORMANCE - 6/10

PRICE - 7/10

VALUE - 6/10

6.8

PROS

DSM 7.2 Software Suite: Includes license-free tools like Active Backup, Snapshot Replication, Synology Drive, Photos, and Surveillance Station.
Low Power Consumption: Consumes just ~17W under load and ~6W in hibernation, making it highly efficient for 24/7 use.
Quiet Operation: Runs at just 19.6 dB(A) in idle, with a single 92mm fan and well-controlled thermals, ideal for home or office environments.
Integrated Graphics Support: The Intel J4125 includes UHD 600 graphics for light Plex or Jellyfin transcoding and improved multimedia indexing.
2.5GbE + 1GbE Ports: Offers faster-than-Gigabit networking without requiring premium models or PCIe upgrades.
Flexible RAID and File System Support: Supports Btrfs, SHR, RAID 0/1, and volume expansion with larger drives via DSM.
Compact and Lightweight Design: Small footprint (165 × 108 × 232 mm, 1.3 kg) fits neatly into tight or silent workspaces.

CONS

Strict Drive Compatibility: Officially supports only Synology-branded HDDs and SSDs, with DSM limiting or blocking unsupported drives.
Outdated CPU: Still uses a 2019-era Intel Celeron J4125, which lacks the performance headroom of newer N-series or AMD chips.
Memory Constraints: Comes with 2GB soldered RAM and supports only up to 6GB with Synology-validated modules.
No I/O Expandability: Lacks PCIe, SD card, or USB 3.2 Gen 2 ports; USB limited to 5Gbps with no front-mounted convenience port.

Where to Buy a Product
			VISIT RETAILER ➤
			VISIT RETAILER ➤

Feature-Rich DSM Software and Integrated Services

One of the strongest arguments in favor of the DS225+ is its inclusion of Synology’s DiskStation Manager (DSM), widely recognized as one of the most polished NAS operating systems on the market. DSM 7.2 runs natively on the DS225+ and includes a comprehensive suite of first-party tools designed for file management, backup, synchronization, collaboration, and multimedia.

Applications such as Active Backup for Business enable full system imaging and granular backups for Windows and Linux clients, while Hyper Backup supports encrypted, versioned backups to remote Synology NAS, USB drives, or public cloud platforms. These tools are license-free and integrate tightly with DSM’s centralized control panel and task scheduler, making them practical for individuals and small teams alike.

The DS225+ also supports Snapshot Replication, allowing users to create fast, low-overhead restore points across shared folders or entire volumes. This is especially useful for protecting data against accidental deletion or ransomware threats. Multimedia services such as Synology Photos and Video Station are included, with support for AI-driven features like facial and object recognition—provided the RAM is upgraded to at least 4GB.

Additionally, users can deploy lightweight productivity services such as Synology Drive, Chat, and Office, all of which are accessible via browser or mobile apps. While the DS225+ is limited to 2 bays, it still benefits from full access to Synology’s software stack, giving users enterprise-grade functionality in a compact and relatively affordable unit.

Locked Drive Compatibility Limits Flexibility and Upgrade Options

A major drawback of the DS225+ is Synology’s increasingly rigid stance on drive compatibility, particularly with its 2025 product generation. At launch, the DS225+ only officially supports Synology-branded HDDs and SSDs, including the HAT5300 and SAT5200 series. While these drives offer solid performance and enterprise-grade validation, they are often more expensive than third-party alternatives and far less widely available in retail markets.

More critically, DSM may block or degrade functionality if users install unsupported drives—such as WD Red, Seagate IronWolf, or Toshiba N300—even if those drives meet technical requirements. This includes disabling RAID creation, expansion, and in some cases even volume initialization.

For users hoping to reuse drives from older systems or build cost-effective arrays with commodity drives, this presents a serious limitation. The policy effectively turns the DS225+ into a semi-proprietary system where basic RAID features and DSM warnings depend on purchasing Synology-approved hardware.

While it’s possible the compatibility list may expand in the future, as of July 2025, this restriction creates significant friction for DIY users or small offices managing mixed storage fleets. It also undermines the flexibility that has traditionally been one of Synology’s key advantages over more locked-down storage ecosystems. Users seeking the freedom to choose drives based on price, warranty, or local availability will find the DS225+ ecosystem increasingly restrictive.

Exceptionally Low Power Consumption and Quiet Operation

The DS225+ is particularly well-suited for 24/7 deployment in environments where power efficiency and noise are concerns, such as home offices, media rooms, or shared living spaces. In real-world usage, the system consumes just 16.98 watts during access and drops as low as 6.08 watts in HDD hibernation, making it one of the most energy-efficient 2-bay NAS systems in its class.

This low draw is aided by the efficient Intel J4125 processor and a single 92mm system fan that manages thermals without overcompensating. During testing, the DS225+ maintained component temperatures of 32°C–37°C even under sustained moderate CPU and disk activity, confirming that the chassis design and airflow are well-optimized for the thermal envelope.

In terms of acoustics, the DS225+ is also ideal for quiet setups. It produces just 19.6 dB(A) of noise at idle—barely above ambient background levels—and remains quiet even under drive access or medium fan profiles. This makes it an appealing choice for use in proximity to desks, entertainment setups, or even bedrooms, without becoming a source of distraction. The adjustable fan modes (Full-Speed, Cool, and Quiet) can be fine-tuned in DSM, allowing users to prioritize either silence or cooling based on workload and ambient conditions. For users who want a reliable NAS that can operate continuously without noticeable noise or energy penalties, the DS225+ delivers an efficient and unobtrusive experience.

Aging Intel Celeron J4125 CPU Limits Future-Proofing

The DS225+ continues to use the Intel Celeron J4125, a 4-core, 4-thread processor first launched in late 2019. While it still performs adequately for DSM tasks, light media streaming, and small office workloads, it is now well behind newer processor architectures in terms of efficiency, instruction set support, and overall responsiveness.

Competing NAS units released in 2024 and 2025 have moved on to Intel N-series, Jasper Lake, or even embedded AMD processors, many of which offer better performance-per-watt, additional cores, and support for modern instruction sets such as AVX2 and higher memory bandwidth. In contrast, the J4125’s dated 14nm Gemini Lake Refresh architecture lacks modern features and could begin to show its age sooner, especially under multitasking or when running additional DSM packages concurrently.

Although the DS225+ is not intended for heavy virtualized workloads or media encoding, the use of such an older CPU architecture restricts its growth potential. During testing, even modest activity such as Surveillance Station recording or Synology Drive sync tasks caused the CPU to reach 60–70% utilization, leaving little room for additional services. Docker and Virtual Machine Manager are supported, but their use is constrained by both CPU headroom and the device’s limited memory ceiling. For users expecting to scale their usage over the next 3–5 years, the DS225+ may struggle to keep pace as DSM continues to evolve and introduce more background services, analytics, and real-time processing demands.

Integrated Graphics for Light Transcoding and Multimedia Tasks

A notable advantage of the DS225+ is its use of the Intel Celeron J4125, a quad-core x86 processor that includes integrated Intel UHD 600 graphics. While this is not a new CPU, the presence of onboard graphics enables hardware-accelerated video decoding and transcoding, a feature that’s become less common in newer NAS systems using ARM-based or non-iGPU x86 processors. For users planning to run Plex or Jellyfin, this hardware acceleration allows the DS225+ to handle light 1080p transcoding tasks—useful when streaming to devices with limited codec support or over constrained network connections.

This capability is especially important for homes or small offices that want centralized media storage without relying on local playback compatibility. During testing, the DS225+ performed adequately when transcoding one or two 1080p streams simultaneously, especially when the source files used H.264 or H.265 formats compatible with the GPU.

Synology’s native apps like Surveillance Station and Synology Photos also benefit from integrated graphics, improving responsiveness during thumbnail generation and background indexing of photos and videos. While not intended for intensive media workflows, the DS225+ offers enough GPU performance for common multimedia use cases, making it more versatile than similarly priced NAS units that lack any form of video acceleration.

Limited Memory and Restrictive Upgrade Policy

The DS225+ ships with just 2GB of DDR4 memory, which is soldered directly to the motherboard, limiting flexibility from the outset. While it does feature a single accessible SODIMM slot to expand the total memory to 6GB (2GB onboard + 4GB additional), Synology officially supports only their own branded 4GB memory module. Using non-Synology memory will either trigger DSM warnings or void technical support eligibility. This restrictive policy contrasts with other NAS vendors that support industry-standard memory upgrades more openly. In practical terms, the 6GB ceiling is already considered low for 2025, especially as DSM continues to expand its service ecosystem and memory-hungry packages like Photos, Drive, and Surveillance Station become more prevalent.

Real-world testing shows that even at idle with no user-installed applications, DSM often consumes 28–38% of available memory due to intelligent caching. Once additional services are installed—such as indexing, media streaming, or light virtual machines—the system can begin to feel constrained, leading to slower response times or increased reliance on swap memory. For example, enabling facial recognition in Synology Photos or running simultaneous Docker containers may quickly push the system beyond its comfortable operational range. This limitation makes the DS225+ poorly suited for users who want to experiment with virtualization, host large collaborative environments, or ensure headroom for future DSM features. Even for modest multi-user environments, the soldered memory and limited upgrade capacity represent a clear technical bottleneck.

Dual LAN Ports with 2.5GbE Support for Faster Transfers

The DS225+ is equipped with two Ethernet ports—one standard 1GbE and one 2.5GbE—giving users flexibility in how they connect and scale their network performance. This is a meaningful improvement over entry-level NAS models that only offer single Gigabit connectivity, especially as more consumer routers and switches begin to support multi-gigabit speeds. When paired with a compatible switch or direct 2.5GbE connection, the DS225+ can achieve transfer speeds up to 280–290MB/s under optimal conditions, significantly reducing the time needed for backups, media streaming, or large file transfers over LAN. For those sticking to 1GbE setups, the second port still provides redundancy or the option to separate network traffic between general access and administrative tasks.

Although the DS225+ does not support link aggregation or PCIe expansion, having dual LAN ports allows for some segmentation and future-proofing in small network environments. Users can reserve the faster 2.5GbE interface for high-priority devices such as a workstation or editing PC, while the 1GbE port can be used for background syncing, IP camera feeds, or system management. The inclusion of 2.5GbE is also relevant in home lab and prosumer scenarios, where higher-speed NAS-to-NAS replication or remote backup over multi-GbE connections is becoming more common. While the benefit is conditional on the rest of the network infrastructure supporting these speeds, it’s still an advantage that many previous 2-bay NAS models from this brand do not provide.

Limited I/O Expansion and Slower USB Connectivity

While the DS225+ includes the essentials for a basic NAS setup, its external connectivity is minimal, offering just two USB 3.2 Gen 1 ports, each limited to 5Gbps. This is notably behind the current standard of USB 3.2 Gen 2, which offers 10Gbps, and well below newer competitors that feature USB-C, eSATA, or PCIe slots for future expansion.

The lack of a front-mounted USB port or SD card reader also reduces convenience for users who regularly transfer media from cameras or external drives. In scenarios involving backup rotation, media ingestion, or hot-swapping data from multiple USB devices, users may find themselves manually unplugging and swapping cables due to the low number and placement of ports.

This limitation becomes more pronounced as the DS225+ cannot be expanded via PCIe, ruling out the addition of 10GbE networking, additional NVMe cache, or external SAS enclosures. Even Synology’s own expansion units are unsupported on this model, meaning what you see is essentially what you’re locked into for the lifespan of the system. While the DS225+ works well within its default role, users requiring scalable connectivity for workflows like multi-tiered backup, external archives, or direct media workstations will likely find it too constrained. The inability to expand I/O makes it harder to adapt the device as your setup grows or changes, placing it at a disadvantage in a market where even entry-level NAS units are becoming more modular.

Compact Design with Full DSM Access and RAID Flexibility

Despite its small physical footprint, the DS225+ delivers the full functionality of Synology’s DSM ecosystem, enabling users to configure advanced storage, backup, and collaboration features without needing a larger or more expensive unit. Measuring just 165 mm x 108 mm x 232.2 mm and weighing 1.3 kg, the DS225+ fits easily on a shelf, under a desk, or alongside other AV equipment. This makes it especially appealing to users with limited space or those looking to maintain a minimal setup. The 2-bay form factor supports 3.5″ SATA HDDs or 2.5″ SSDs, and users can configure their storage using Basic, JBOD, RAID 0, RAID 1, or Synology Hybrid RAID (SHR) depending on redundancy and capacity needs.

The benefit here is that while the DS225+ lacks the expansion features of higher-end NAS units, it doesn’t compromise on software or configurability. DSM allows for volume expansion with larger drives, RAID migration from Basic to RAID 1, and SSD TRIM support for improving SSD longevity. Users can also benefit from Btrfs snapshots and file versioning, even on this compact system.

This flexibility allows individuals to start with a single drive and expand or rebuild as storage needs increase. The ability to pair this with external drives via USB 3.2 for backups or offloading archived content extends its functionality further. For users who want the core NAS experience without the complexity or physical scale of larger models, the DS225+ is a strong, space-efficient option.

Unclear Upgrade Path Amid Synology’s Strategic Shift

The DS225+ sits within a transitional period for Synology, during which the company has increasingly signaled a shift toward pre-populated, locked-down platforms such as the BeeStation and BeeStation Plus series. These newer lines are aimed at users seeking simplicity and cloud-like convenience, but they also reflect Synology’s broader move toward closed ecosystems with tighter control over hardware and software integration. As these preconfigured models begin to replace traditional bare-metal Plus series NAS options in Synology’s lineup, it’s unclear how much longer models like the DS225+ will remain actively supported or prioritized in DSM development.

This creates uncertainty for prospective buyers who want a long-term investment. While Synology’s current support lifecycle is generally strong, the tighter coupling between software and specific hardware could eventually result in DSM updates being optimized for newer, more restrictive platforms. For example, users of the DS225+ may find that future DSM features—such as enhanced AI functions or hybrid cloud integrations—are limited or unsupported due to the older CPU or reduced memory ceiling.

Additionally, if the company continues to prioritize its locked-drive strategy and proprietary accessories, even firmware-level changes could make legacy systems like the DS225+ feel increasingly boxed in. This isn’t an immediate concern, but for users thinking 3–5 years ahead, the direction of Synology’s portfolio suggests the DS225+ may not age as gracefully as its predecessors once did.

Synology DS225+ NAS Review – Verdict and Conclusion

The Synology DS225+ delivers a polished and well-integrated NAS experience that caters to home users and small teams looking for dependable data storage, backups, and light multimedia handling. Its compact form factor, efficient thermal and acoustic design, and access to the full DSM 7.2 ecosystem make it a compelling choice for those who prioritize low noise, low power use, and a robust software suite. The inclusion of 2.5GbE networking, integrated graphics for basic Plex or Jellyfin transcoding, and support for Btrfs, SHR, and snapshot replication ensure that it remains practical for a wide range of core NAS tasks. It’s a system that “just works,” and for many users, that is enough to justify its place on their shortlist.

However, the DS225+ is increasingly defined by its limitations as much as its strengths. The use of an aging processor, restricted memory expansion, limited I/O, and locked-down drive compatibility significantly reduce its appeal for users who expect flexibility, performance headroom, or long-term scalability. When positioned against similarly priced or even cheaper NAS solutions from competing brands—many of which offer newer CPUs, broader third-party drive support, and better external connectivity—the DS225+ risks feeling outdated straight out of the box. Synology’s evolving product strategy also casts doubt on the long-term direction for devices like this. For users who are already committed to the Synology ecosystem or need something simple and quiet for basic NAS duties, the DS225+ can still be a solid purchase. For those looking for open-ended expandability or stronger hardware per dollar, however, it’s worth comparing alternatives or waiting to see how Synology’s next generation unfolds.

Join Inner Circle

Want to follow specific category? Also Read...GL.iNet Comet Pro Review - TheGL.iNet Comet Pro ReviewWeek 33 Tech Roundup – TerraTerramaster D1 SSD ReviewTerramaster D4 SSD USB4 Box ReTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewSynology AI Console ReviewSynology AI Console Review - GDS1825+ vs DXP8800 PLUS NAS - Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

CWWK M8 MITX 10GbE NAS Motherboard & CPU Review

The CWWK M8 NAS motherboard, equipped with either the Intel Twin Lake N150 or N355 processor, is a compact Mini-ITX platform aimed at advanced home NAS builders and small office users looking for a cost-effective alternative to branded NAS systems. Measuring just 17 x 17 cm, it combines several high-end features such as an onboard 10GbE RJ45 LAN (via the AQC113C controller), dual 2.5GbE Intel i226-V ports, and support for up to eight SATA drives through dual SFF-8643 ports. The board also integrates two M.2 NVMe slots, a DDR5 SO-DIMM memory slot supporting up to 48GB, and a PCIe Gen3 x1 slot for modest expansion. Unlike many low-power ITX boards, the M8 includes support for Wake-on-LAN, PXE boot, and hardware monitoring, which makes it a viable candidate for 24/7 operations and remote deployment scenarios. With its efficient lane distribution—critical for balancing 10GbE, NVMe, SATA, and PCIe simultaneously—it delivers a level of I/O flexibility not commonly found at this price point, particularly in the sub-$300 range.

CWWK M8 10GbE NAS Mobo – Quick Conclusion

The CWWK M8 NAS motherboard strikes a practical balance between performance, expandability, and power efficiency, making it a compelling choice for DIY NAS builders looking for 10GbE capability without the complexity or cost of larger platforms. With support for up to eight SATA drives via dual SFF-8643 connectors, dual NVMe slots, and a DDR5 SO-DIMM socket (up to 48GB), it delivers a surprising level of storage flexibility in a compact Mini-ITX form factor. Performance across the 10GbE port is strong—achieving near-saturation read speeds and respectable write throughput—while NVMe and SATA access remain consistent thanks to a careful PCIe lane allocation strategy. Power draw remains modest, even when fully populated with drives and expansion cards, reinforcing its suitability for 24/7 deployments. However, limitations like Gen3 x1 NVMe speeds, a single RAM slot, and shared PCIe/E-Key lane usage should be considered by those seeking maximum expansion or high-end performance. Still, for its price, pre-installed CPU, and strong open-source OS compatibility, the M8 offers an unusually capable base for home servers, backup targets, or even Plex and Proxmox environments.

BUILD QUALITY - 9/10

HARDWARE - 9/10

PERFORMANCE - 7/10

PRICE - 10/10

VALUE - 10/10

9.0

PROS

10GbE RJ45 port (AQC113C) with full Gen3 x2 bandwidth
Dual 2.5GbE Intel i226-V ports with wide OS compatibility
Supports up to 8 SATA drives via dual independent SFF-8643 ports
Includes 2× M.2 NVMe 2280 slots, suitable for cache or boot use
Very low power draw (~20W under load with 10g+2xM.2, ~31W idle fully populated with HDDs)
Compact Mini-ITX form factor with well-organized layout
Exceptional Price vs H/W Level
Broad OS support (TrueNAS, Unraid, PVE, Linux, Windows, etc.)

CONS

PCIe slot and M.2 E-Key share a lane—only one usable at a time
M.2 NVMe slots limited to PCIe Gen3 x1 speeds
Single DDR5 SO-DIMM slot (no dual-channel support)

CWWK M8 10GbE NAS Mobo – Design

The physical design of the CWWK M8 motherboard is centered around the Mini-ITX standard, maintaining a compact 17 x 17 cm footprint that caters to space-conscious NAS builds. Despite its small form factor, the layout is methodically structured to maximize accessibility and airflow. Key components such as the dual SFF-8643 ports, NVMe slots, and RAM socket are positioned for easy cable routing and minimal overlap.

The CPU arrives pre-installed with a low-profile ball-bearing cooler, which is sufficient for the low 6W TDP of the N150 processor. There’s also a system fan header onboard with PWM support, allowing for basic thermal management in enclosed NAS chassis. The board is finished in a neutral white PCB, aligning with recent CWWK trends that blend aesthetic minimalism with function-first engineering.

Storage expansion is one of the most defining elements of the M8. It features dual SFF-8643 ports that, with breakout cables, provide connectivity for up to eight SATA III (6Gbps) drives.

These connectors are routed through independent ASM1164 controllers, each on a dedicated PCIe Gen3 x1 lane, ensuring that drive traffic is not bottlenecked through a single controller.

This separation also means users can confidently deploy SSDs or mixed SSD/HDD arrays without major performance drops under load. The board supports RAID configurations at the OS level via TrueNAS or Unraid, and is capable of delivering reliable throughput for multi-drive setups including RAID-Z, RAID5, or JBOD.

In addition to traditional SATA storage, the board includes two M.2 NVMe 2280 slots, each operating at PCIe Gen3 x1. While this limits peak performance to around 900MB/s per slot, it is sufficient for cache drives or SSD-based boot volumes, especially in NAS environments where latency and parallel IOPS matter more than raw sequential throughput. The placement of the NVMe slots, one top-side and one underside, helps distribute heat and gives builders flexibility in cooling strategy. Both slots are directly accessible, and installation doesn’t require removing other components, which is particularly useful during upgrades or replacements.

Storage scaling is enhanced through the modularity of the board’s SFF-8643 interfaces. As discussed in your review, these ports can be adapted not just to standard SATA breakouts but also to additional M.2 or U.2 devices with the correct adapter cards. This creates potential for hybrid NAS setups—using SATA for bulk data storage and NVMe for hot data or VM usage. Such versatility in drive mapping is rarely offered at this price point, and makes the board viable not only for home media servers but also for lab environments or light virtualized storage nodes.

One lesser-known but practical addition is the inclusion of a MicroSD (TF) slot on the PCB. While it’s not ideal for installing major OS platforms like TrueNAS Core, it can be useful for loading bootloaders such as Unraid or for system config backups. Importantly, the TF slot is recognized natively by most operating systems and appears as a usable storage device without requiring extra drivers. It also enables simple out-of-band recovery or local snapshot scripts in more advanced workflows. Combined with the available internal USB port, the board allows multiple low-impact boot or recovery paths to coexist alongside primary storage deployments.

CWWK M8 10GbE NAS Mobo – Ports and Connections

The CWWK M8 motherboard is equipped with a well-rounded selection of external and internal I/O ports that support a broad range of NAS and server use cases. Most notably, it includes one 10GbE RJ45 port powered by the AQC113C controller and two additional 2.5GbE ports via Intel i226-V chips.

These networking options allow the board to operate in multiple roles simultaneously, such as high-speed file sharing over 10GbE while maintaining service management or redundancy via the dual 2.5GbE ports. The inclusion of Intel network controllers ensures wide compatibility with open-source operating systems like TrueNAS and Unraid, as well as ESXi and PVE, making it a suitable base for software-defined networks, VLAN tagging, or bonded interface configurations.

On the USB front, the M8 provides a combination of high-speed and legacy options. It includes 1× USB Type-C (10Gbps) and 1× USB 3.2 Gen2 Type-A (10Gbps) ports for external storage or fast USB peripherals. There are also 2× USB 2.0 Type-A ports located at the rear I/O and an internal USB 2.0 header, which is useful for OS boot drives such as Unraid.

Internally, the board also features a USB 3.0 header and a Type-E header, allowing front-panel USB 3.x support if the chassis includes such connectors. These ports give builders the flexibility to attach boot media, backup targets, or even USB-based UPS management tools without additional hardware.

For video output and direct display use, the M8 includes 1× HDMI 2.0 and 1× DisplayPort 1.4, both capable of 4K@60Hz output. These are connected via the integrated UHD graphics included with the N150/N355 CPU. While these outputs are generally not essential in a headless NAS environment, they provide value in cases where the system is used as a hybrid HTPC/NAS, or when diagnostics and BIOS access are needed without SSH or remote management tools. The GPU is also supported for hardware video decoding, making the board a viable base for light Plex or Jellyfin deployments that rely on integrated graphics acceleration.

Internally, the board features several headers that further expand its flexibility. Alongside the previously mentioned USB and fan headers, there’s an M.2 E-Key slot for wireless modules, which shares PCIe lanes with the x1 PCIe slot and cannot be used simultaneously. The board also includes an SD card (TF) slot which appears natively in supported OSes—suitable for bootloaders or small backup tasks.

While not suited to high-throughput use, it does provide an alternative storage option in embedded or recovery scenarios. The arrangement and accessibility of these ports are well considered for such a small form factor, ensuring that builders can access almost all essential functionality without relying on riser boards or USB hubs.

CWWK M8 10GbE NAS Mobo – Internal Hardware

At the heart of the M8 motherboard lies a choice between two Intel Twin Lake processors: the N150 and the N355. The N150 is a quad-core, four-thread CPU with a base architecture derived from the Alder Lake-N family, running at up to 3.6GHz and featuring a modest 6MB cache. It operates at a remarkably low TDP of 6W, making it suitable for passive or semi-passive cooling environments.

The N355, on the other hand, doubles the thread count and bumps performance further, albeit at a slightly higher price. Both CPUs are pre-soldered to the board and arrive with a compact, ball-bearing fan assembly that supports quiet, efficient cooling. These processors are not meant for heavy computation but offer enough power for file server duties, light containerization, and even modest Plex media serving—with the N150 proving capable of 4K playback in testing.

Memory support is handled via a single DDR5 SO-DIMM slot, officially supporting up to 48GB at 4800MHz. While dual-channel operation is not available, DDR5’s higher base bandwidth helps compensate for this limitation in real-world usage. The board accepts standard non-ECC modules and will clock down any faster memory to the platform’s 4800MHz limit.

For NAS and virtualization users, this constraint is acceptable, though power users may note that memory upgrades are capped to a single slot. That said, 32GB or 48GB configurations are more than adequate for common use cases like running TrueNAS Scale with Docker containers, or spinning up a few VMs in Proxmox.

The board’s PCIe lane distribution is particularly deliberate given the constraints of the Twin Lake architecture, which provides just 9 usable PCIe lanes. Despite this, the M8 balances connectivity by allocating PCIe Gen3 x2 bandwidth to the 10GbE port, ensuring full 10Gbps throughput with bandwidth overhead. The SATA controllers each receive dedicated PCIe Gen3 x1 lanes, and each M.2 NVMe slot is similarly mapped at x1 speed.

The remaining lane is shared between the M.2 E-key (for Wi-Fi/BT modules) and the physical PCIe x1 expansion slot. This means that users must choose between Wi-Fi upgrades or additional PCIe peripherals—a typical tradeoff on ITX boards, but worth noting during build planning.

From a system management perspective, the board supports UEFI-only boot modes and includes features such as Auto Power-On, Scheduled Power-On, PXE boot, Wake-on-LAN, and Secure Boot, making it suitable for remote deployment or integration into managed environments. The board includes thermal monitoring via BIOS and OS-level tools, with fan control limited to one system fan header supporting PWM. These features, while basic, are sufficient for home server use or edge deployment in micro data centers. The compact ITX layout also makes the board a candidate for embedded use in custom NAS chassis or OEM enclosures with constrained airflow or proprietary mounting.

CWWK M8 10GbE NAS Mobo – Performance and Power Tests

During benchmarking and real-world tests, the N150-based M8 motherboard demonstrated performance levels consistent with expectations for an ultra-low-power NAS platform. Sequential read speeds over the 10GbE interface approached saturation during synthetic ATTO Disk Benchmark tests, particularly with a 256MB block size, where throughput consistently exceeded 950MB/s.

Write performance, however, plateaued slightly lower, averaging between 650–700MB/s for 1GB and 4GB file tests. These figures are typical for systems utilizing Gen3 x1 NVMe SSDs and efficiency-focused CPUs like the N150, where write-intensive operations are more limited by CPU capability than disk throughput. Larger transfers or workloads involving compression will see slightly more variation, but in most scenarios, read performance remained stable and consistent.

Using a RAID 1 array of Seagate IronWolf drives connected via the dual SFF-8643 SATA ports, the board achieved average write speeds of 550–580MB/s, with occasional peaks in read performance reaching up to 800MB/s, though these were not sustained.

These results reflect the benefit of having each SATA group routed through a separate ASM1164 controller, ensuring that bandwidth isn’t choked under RAID configurations or multi-drive reads. In practical terms, this makes the board well-suited for file-serving tasks, Time Machine backups, or media library hosting, with no obvious contention across interfaces during simultaneous read/write operations.

NVMe performance was constrained by the PCIe Gen3 x1 link per M.2 slot, which limited theoretical throughput to under 1GB/s. Tests confirmed read speeds of around 720MB/s and write speeds of approximately 520MB/s in sustained transfers. While not ideal for high-performance VM storage or video editing scratch disks, these speeds are more than adequate for cache duties or container storage. Importantly, the board maintains predictable performance across both NVMe slots, and thermals were manageable under active load without throttling, thanks in part to the pre-attached CPU cooler and accessible airflow pathways on the board’s surface.

In terms of power efficiency, the system consumed approximately 19–20W under load when configured with the N150 CPU, 8GB of DDR5, two NVMe SSDs, and a 10GbE connection in active use. When idle but fully populated with four SATA drives and an expansion card installed (but unused), power draw settled at around 31.4W. This confirms the board’s suitability for 24/7 operation without requiring high-capacity PSUs or custom thermal management.

CWWK M8 10GbE NAS Mobo – Verdict and Conclusion

The CWWK M8 motherboard delivers a rare combination of high-speed networking, broad storage expandability, and low power consumption, all within a Mini-ITX footprint. It manages to balance PCIe lane allocation across 10GbE, dual NVMe, and eight SATA drives without compromising basic performance, thanks to deliberate hardware pairing and thoughtful board layout. The use of separate SATA controllers, a well-provisioned 10GbE controller on Gen3 x2 lanes, and native UEFI support reflects a clear intent to make this a serious option for NAS enthusiasts and advanced home users. Its ability to sustain near-saturation speeds on the 10GbE connection and provide usable NVMe throughput makes it a capable base for TrueNAS, Unraid, or Proxmox environments—whether for home backup, Plex media hosting, or light VM workloads.

However, there are trade-offs. The limited PCIe expandability, single RAM slot, and Gen3 x1 constraints on NVMe performance may not meet the needs of high-end workstation builders or enterprise deployments. Additionally, the shared PCIe lane between the M.2 E-key and the PCIe slot limits simultaneous use of both interfaces, which could affect those hoping to add both Wi-Fi and a PCIe peripheral. Still, for its price point and target use case, the M8 delivers well above average. It avoids many of the bottlenecks seen in competing low-power boards and manages to do so at under $300 with a pre-installed CPU. For users building a power-efficient, high-bandwidth DIY NAS with flexible drive options and capable base specs, the CWWK M8 stands out as a strong contender.

Join Inner Circle

Want to follow specific category? Also Read...GL.iNet Comet Pro Review - TheGL.iNet Comet Pro ReviewWeek 33 Tech Roundup – TerraTerramaster D1 SSD ReviewTerramaster D4 SSD USB4 Box ReTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewSynology AI Console ReviewSynology AI Console Review - GDS1825+ vs DXP8800 PLUS NAS - Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

The UGREEN DH4300 PLUS NAS Review – Good Value?

The UGREEN DH4300 Plus is a 4-bay NAS solution introduced quietly into the company’s growing lineup of storage devices, appearing online without the usual fanfare. Closely related to the DH4300 Plus in both hardware and feature set, this model forms part of UGREEN’s value-tier NAS systems, designed to provide essential private cloud functionality at a lower cost. Targeted at home users, prosumers, and small offices, the DH4300 Plus offers a mix of modern storage capacity and lightweight computing through its ARM-based architecture. With support for RAID 0, 1, 5, 6, and 10, 2.5GbE networking, and up to 120TB of raw storage across four SATA bays, the device aims to provide a reasonably capable platform for tasks like file serving, multimedia streaming, and basic photo management.

However, the DH4300 Plus doesn’t just follow the pattern of other budget NAS solutions. It includes features uncommon at this price point, such as HDMI output and 10Gbps USB connectivity, which extend its use case beyond simple backups into media and even light-duty AI-powered photo organization. Its system-on-chip, the Rockchip RK3588, is more powerful than the processors seen in comparable entry-level NAS systems from other brands like Synology or QNAP. While it lacks the high-end features of premium NAS units—such as multi-port networking or M.2 expansion—it still manages to deliver a compact, energy-efficient package suited to most daily NAS workloads. This review breaks down each component of the DH4300 Plus, from its physical design and internal hardware to its software ecosystem, to help users decide whether this is the right solution for their needs.

UGREEN DH4300 NAS Review – Quick Conclusion

The UGREEN DH4300 Plus stands out as a well-equipped entry-level NAS that offers considerably more than its modest price tag suggests, positioning itself as a serious contender in the growing value NAS market. Powered by the RK3588 ARM processor and backed by 8GB of LPDDR4X memory, it delivers capable performance for a wide range of NAS tasks including file sharing, media streaming, light containerization via Docker, and AI-assisted photo management. Its support for 2.5GbE networking, 10Gbps USB ports, and HDMI 2.1 output adds versatility, enabling faster-than-Gigabit transfer speeds and options for direct media playback or on-site display access. The system’s low power consumption, compact footprint, and quiet operation make it especially well-suited for 24/7 deployment in home or small office environments. AI functionality for face recognition and album generation, powered by the on-chip NPU, further enhances its value for users managing large personal photo or media libraries. However, the device is limited by its lack of PCIe or M.2 expansion, absence of link aggregation or redundant LAN, and the relatively immature UGOS Pro software, which trails behind DSM and QTS in terms of advanced features, third-party app support, and overall refinement. Still, for users seeking a reliable, efficient, and feature-packed NAS at a competitive price, the DH4300 Plus represents a compelling option that punches well above its weight—offering core functionality, multimedia capabilities, and surprising hardware strength without venturing into high-end NAS pricing territory.

SOFTWARE - 6/10

HARDWARE - 7/10

PERFORMANCE - 6/10

PRICE - 9/10

VALUE - 10/10

7.6

PROS

Powerful ARM CPU: Equipped with the RK3588 SoC, offering 8 cores, integrated GPU, and NPU for AI workloads.
Generous (but fixed!) Memory: 8GB LPDDR4X RAM, rare in budget NAS systems, supports multitasking and Docker use.
2.5GbE Network Port: Provides faster-than-Gigabit throughput for backups, media streaming, and multi-user access.
HDMI 2.1 Output: Rare on ARM powered turnkey NAS, and enables direct media playback or NAS control at up to 4K 60Hz, uncommon in value-tier NAS units.
USB 10Gbps Ports: Dual USB-A 10Gbps and one USB-C 5Gbps allow for high-speed backups or external storage expansion.
AI Photo Management: Built-in NPU supports facial recognition and scene detection for local, private media organization.
Low Power Consumption: Efficient under load (~30W) and idle (~5W without drives), suitable for 24/7 operation.

CONS

No PCIe or M.2 Expansion: Lacks future scalability for NVMe caching, 10GbE, or other upgrades.
Single LAN Port: Only one 2.5GbE port, with no failover or link aggregation support.
Limited Software Ecosystem: UGOS Pro lacks iSCSI, VM support, and native Jellyfin, trailing behind DSM/QTS in maturity.

Buy the UGREEN DH4300 on Amazon @409	Buy the UGREEN DH4300 on UGREEN.COM	Buy the UGREEN DH4300 on B&H
	STORE

UGREEN DH4300 NAS Review – Design and Storage

The UGREEN DH4300 Plus adopts a minimalist, vertical chassis design that blends functional cooling with a relatively compact footprint. Measuring 155mm x 155mm x 215.7mm, the enclosure is tall and narrow, allowing it to accommodate four internal 3.5″ or 2.5″ SATA drives without consuming significant desk space. Instead of traditional hot-swappable trays, UGREEN uses a toolless drive insertion mechanism where each drive slides vertically into the chassis.

This approach reduces complexity and keeps production costs lower but introduces compromises in terms of drive handling and vibration isolation. The top panel is removable and held magnetically, granting access to the internal drive bays and initial setup QR code sticker located inside the lid. Ventilation is handled by side vents, perforations at the top of the cover, and a single downward-facing internal fan near the system board.

Drive installation is simple but not entirely refined. Each of the four bays inside feeds directly into a fixed SATA backplane. Drives are inserted vertically without caddies and seat against rubber bumpers at the rear, which help reduce some of the mechanical vibration but do not provide the same structural integrity or thermal separation found in more traditional hot swap and more easily accessible tray-based designs.

The plastic inner rails feel light and somewhat fragile, especially when compared to metal-based bays found in more premium NAS models. Still, the internal structure was found to be sufficient during testing, even when populating the system with higher-capacity drives. The unit officially supports up to 4 x 30TB drives, allowing a total storage capacity of 120TB in JBOD or RAID configurations, though users will need to supply their own disks as none are included in the package.

Airflow and thermal behavior of the DH4300 Plus are managed via passive intake vents and a single active cooling fan positioned on the base of the chassis. This fan draws air from the top and sides of the NAS, passing it over the CPU and power delivery components before exhausting out the bottom. While this layout is thermally efficient for a low-power device like this, it lacks redundancy and doesn’t allow for custom fan curve profiles within UGOS Pro.

During 24-hour tests with four IronWolf drives installed, drive temperatures remained between 44°C and 45°C, while the system chassis and CPU areas stayed in the range of 38°C to 42°C under typical workloads. Though these temperatures are within operational thresholds, users deploying the NAS in warmer environments or fully populating it with high-RPM drives may need to consider ambient airflow or active external cooling assistance.

The DH4300 Plus is constructed from a mix of metal and plastic materials, with a soft matte finish and minimal front I/O clutter. This helps the device appear more neutral in office or home setups. All primary status LEDs are located subtly on the front edge, along with a power button and high-speed USB-C port. Despite its budget positioning, UGREEN has maintained an external aesthetic that doesn’t look out of place beside other premium tech. However, internal cost-saving decisions are more evident. The lack of a proper drive locking mechanism or hotswap support reinforces that this NAS is not meant for heavy-duty enterprise usage or high-frequency drive replacement tasks. It is more appropriate as a near-permanent local storage solution once disks have been installed and configured.

In terms of storage functionality, the DH4300 Plus supports multiple RAID modes, including Basic, JBOD, RAID 0, 1, 5, 6, and 10. This flexibility is notable, as several competing ARM-based NAS units limit RAID options—particularly RAID 6, which requires higher CPU and memory resources to compute parity. While software RAID performance will depend heavily on the chosen configuration and disk types, the Rockchip RK3588 SoC proved capable of maintaining consistent performance in RAID 5 across moderate workloads, including file copying, media playback, and snapshot operations. UGREEN’s system also offers automatic drive recognition and formatting through the UGOS Pro interface, allowing less experienced users to get started quickly, though without the advanced data scrubbing and repair features available on some higher-end NAS platforms.

UGREEN DH4300 NAS Review – Internal Hardware

At the heart of the DH4300 Plus lies the Rockchip RK3588 processor, an 8-core ARM-based SoC featuring a hybrid core architecture. It combines four high-performance Cortex-A76 cores with four efficiency-oriented Cortex-A55 cores, providing a significant performance uplift over most ARM-based NAS processors in the same price bracket. The RK3588 includes a Mali-G610 GPU and an integrated NPU capable of delivering up to 6 TOPS of AI performance. This allows for features like facial recognition, object tagging, and scene categorization within UGOS Pro. Notably, this chip has seen growing popularity in DIY NAS and edge computing applications due to its multimedia capabilities and low power draw. Its inclusion in a turnkey NAS platform at this price point positions the DH4300 Plus as an outlier among typical value-series offerings.

Complementing the processor is 8GB of LPDDR4X memory, which is soldered to the board and not user-upgradable. While this limits long-term scalability, 8GB is a generous amount for an ARM-based NAS and sufficient for most general-purpose NAS workloads including file sharing, media serving, AI-assisted photo sorting, and light Docker container deployment. The system also features a 32GB eMMC module, serving as a dedicated system drive for UGOS Pro. This separation of the OS from user storage pools ensures stability during boot and updates while also freeing up the full capacity of installed SATA drives for data. The lack of NVMe or SATA DOM options means the eMMC is fixed, but in practice, it performed reliably during testing without any bottlenecks.

From a thermal and power standpoint, the RK3588 platform proves to be highly efficient. Even under moderate to heavy loads—such as simultaneous file transfers, streaming tasks, and indexing—the SoC maintains stable temperatures in the low 40s Celsius range. Combined with a modest power draw of around 30–35 watts under active use (and ~4.7 watts at idle without drives), the DH4300 Plus is suitable for continuous 24/7 operation in home or office environments. While the lack of ECC memory or redundant power limits its appeal for enterprise deployment, the core hardware is well-balanced for its target audience, especially when considering how much performance and functionality is packed into a device with a sub-$400 price point.

UGREEN DH4300 NAS Review – Ports and Connections

The UGREEN DH4300 Plus offers a streamlined but functionally adequate set of connectivity options for a value-focused NAS. On the front of the device, users will find a USB-C port rated at 5Gbps, accompanied by two additional USB-A ports on the rear capable of 10Gbps transfer speeds. These high-speed USB ports are somewhat unusual on an ARM-based NAS and allow for faster direct-attached storage backups or peripheral integration, including UPS management or external media access. While not hot-swappable in the OS UI, the ports performed reliably in tests when mounting USB SSDs and thumb drives for quick file transfer and offline sync. Their positioning also maintains a tidy cable layout, with most high-traffic connections located on the back panel.

Network connectivity is delivered through a single 2.5GbE RJ45 port, which represents a solid step above the standard 1GbE ports found on most entry-level NAS units. This allows the DH4300 Plus to exceed typical Gigabit transfer speeds, reaching up to ~280MB/s in peak file transfer tests using large sequential data. However, the inclusion of only one LAN port means there’s no support for link aggregation or failover. This limits the device’s flexibility in multi-user environments or scenarios requiring redundancy. Given the hardware capabilities of the RK3588 platform, a second LAN port—or even a fallback 1GbE—would have been ideal. Still, for a single-user or small team deployment, the 2.5GbE connection is more than sufficient for everyday access to large media files, backups, and collaborative workspaces.

One of the most unexpected and welcome features is the presence of an HDMI 2.1 output, capable of 4K at 60Hz. HDMI on value-tier NAS systems is uncommon, and its inclusion here enables media playback, real-time NAS control via a directly connected monitor, and potential kiosk or signage applications. The UGOS Pro operating system includes a built-in theater mode to pair with this feature, although its capabilities are more basic than those found in platforms like QNAP’s HD Station. Nevertheless, for users wanting to leverage the NAS as a lightweight local media center or for on-site admin access without relying solely on browser-based control, the HDMI output adds flexibility. The only caveat is that the device lacks any form of PCIe expansion, so users cannot add additional ports or NVMe caching options later.

UGREEN DH4300 NAS Review – Software and Services

The DH4300 Plus runs UGOS Pro, UGREEN’s proprietary NAS operating system tailored for ARM-based platforms. While it doesn’t match the feature depth of more mature systems like Synology DSM or QNAP QTS, UGOS Pro has seen steady improvements and now covers most of the foundational functions expected from a modern NAS. The UI is browser-accessible and includes modules for storage management, user permissions, cloud sync, backups, and multimedia playback. During testing, the OS handled basic setup, RAID initialization, and file system formatting efficiently. Users can configure shared folders, enable SMB/NFS/AFP protocols, and even set up multi-tiered backup routines to local, USB, or cloud destinations such as Google Drive and Dropbox.

One of the more advanced features is the integrated AI photo engine, which leverages the RK3588’s NPU to organize media libraries using facial recognition, object tagging, and scene classification. This is similar in principle to what Synology Photos or QNAP QuMagie offer, though UGOS Pro lacks the same level of customization or filtering depth. The system can automatically generate albums, identify duplicates, and even create baby-focused timelines.

These features worked reliably on smaller photo sets but began to slow down when indexing larger libraries—likely a result of both memory and algorithmic efficiency. Despite this, the inclusion of AI functionality in a sub-$400 NAS is notable, especially since it runs locally and does not require cloud processing.

Application support is growing within UGOS Pro. Native apps for file access, media playback, surveillance (limited), and mobile sync are included, along with support for Docker containers, allowing users to sideload additional tools not officially available. Notably, BTRFS is supported as a file system option, enabling snapshot functionality and some degree of data integrity checks. However, there are limitations: virtualization is not supported due to the ARM architecture, and there’s currently no iSCSI target support.

Additionally, while the broader UGREEN ecosystem includes a Jellyfin app for other devices, this model did not have native Jellyfin support at launch—requiring users to deploy it manually via Docker. Features like multi-factor authentication, scheduled shutdown/start, and remote access are included, but power users may find the interface lacking compared to more polished systems.

UGREEN DH4300 NAS Review – Verdict and Conclusion

The UGREEN DH4300 Plus carves out a unique niche in the budget NAS landscape by delivering hardware typically reserved for higher-tier systems at a much lower price point. Its RK3588 processor, 8GB of RAM, and support for 2.5GbE networking place it well ahead of most similarly priced competitors in terms of raw specifications. Additionally, features such as HDMI output, 10Gbps USB ports, and local AI-powered photo indexing are rare to find in entry-level NAS systems. Despite its plastic-heavy internal design and lack of expansion options like PCIe or M.2, the device delivers stable performance for file sharing, media access, and low-intensity AI workloads. It is not suited for power users demanding virtual machines or advanced snapshot automation, but within its class, the DH4300 Plus presents an appealing balance between cost and capability.

That said, the software experience is still a work in progress. UGOS Pro covers the essentials and offers a visually accessible UI, but lacks the advanced features and ecosystem integration found in more mature platforms like Synology DSM or QNAP QTS. Docker and snapshot support add welcome flexibility, but the absence of native Jellyfin, iSCSI, and VM functionality limits its use in more complex environments. Still, for home users, media collectors, or small office setups looking for reliable backup, modest AI-enhanced photo sorting, and smooth 4K playback, the DH4300 Plus delivers value well beyond its price tag. While it won’t replace high-end NAS appliances, it serves as a capable, efficient, and quietly innovative option in a saturated entry-level NAS market.

Buy the UGREEN DH4300 on Amazon @409	Buy the UGREEN DH4300 on UGREEN.COM	Buy the UGREEN DH4300 on B&H
	STORE

Join Inner Circle

Want to follow specific category? Also Read...GL.iNet Comet Pro Review - TheGL.iNet Comet Pro ReviewWeek 33 Tech Roundup – TerraTerramaster D1 SSD ReviewTerramaster D4 SSD USB4 Box ReTerramaster D4 SSD ReviewTerramaster D1 SSD ReviewSynology AI Console ReviewSynology AI Console Review - GDS1825+ vs DXP8800 PLUS NAS - Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here