FreshRSS

🔒
❌ À propos de FreshRSS
Il y a de nouveaux articles disponibles, cliquez pour rafraîchir la page.
À partir d’avant-hierFlux principal

Synology lance ses disques durs SAS HAS5300

15 juillet 2021 à 07:00
Par : Fx

Synology HAS5300Synology annonce l’arrivée de nouveaux disques durs HAS5300. Il s’agit de disque SAS disponible dans 3 capacités différentes : 8 To, 12 To et 16 To. Ces derniers sont destinés aux boîtiers haut de gamme en entreprise. Regardons de plus près ces HAS5300 dont le prix démarre à partir de 367€ HT… Synology HAS5300 Le SAS (Serial Attached SCSI) est une connectique de disque dur qui trouve ses origines dans le protocole SCSI,. Si le SATA est très présent dans […]

Cet article Synology lance ses disques durs SAS HAS5300 est apparu en premier sur Cachem

New Synology HAS5300 SAS Hard Drives Released

14 juillet 2021 à 14:00

The HAS5300 Hard Drives – New SAS Media from Synology Revealed

Yes, that’s right. Synology has now released a range of SAS (12Gb) hard drives in the HAS5300 series. Last year, when Synology first revealed that they were going to start producing their own range of SATA hard drives for their Diskstation and Rackstation NAS servers, many were a little dubious. Fast forward to 2021 and the HAT5300 8TB, 12TB and 16TB drives are quite well established and aside from some early concerns about hardware locked compatibility and global hard drive shortages caused by Chia (GAH!), Synology’s move towards producing complete 1st part equipped solutions for business is progressing quite smoothly. However, the HAS5300 SAS series of hard drives has clearly been developed to address a glaring inconsistency in their series of devices released in 2020/2021 that featured BOTH SAS and SATA compatibility, but in some cases might have had more streamlined compatibility listings! The HAS5300 is a 7200RPM, SAS interface connected and 256/512MB cache equipped range of hard drives that, although rather similar to the HAT5300 range in terms of performance, durability and operational environment, still allow users looking at the XS and SA systems that are SAS ready to remain truly first-party in their components. So, what do these SAS hard drives have to offer? Are they much different to their SATA alternatives (as we are still talking HDD, not SSD) and should you consider them in your next Synology Solution in 2021/2022? Let’s take a look.

What Are The Specifications of the Synology HAS5300 SAS Hard Drives?

When looking at the specifications of the Synology HAS5300, it needs to be highlighted that much like the HAT5300 series that came before, Synology is not manufacturing/constructing these drives in-house. The Synology HAS5300 drive is built on top of the Toshiba MG08 series. They have added their own Synology DSM specific firmware to keep the system media tailored to the enclosure they are inside, as well as allow supporting internal Firmware update functionality within the Synology Storage manager of DSM 6.2/7.0. Synology has worked with Toshiba on the HAT5300 series before, because of the high endurance workload rating (550TB per Year) on this series and the impressive 230-262MB/s performance benchmark they provide. That said, many users will leap onto the work SAS and think these are going to massively outperform SATA. However, we are still discussing mechanical hard drives here and though the interface allows an impressive 12 Gigabits per second, these drives are still going to comparable to mechanical enterprise hard drives. Why Synology didn’t focus more on SAS SSDs (or hurry up on a U.2 SSD Flashstation solution already) over these HDDs is a little puzzling. Nevertheless, they arrive in three capacities and each can be compared against the Toshiba model ID below:

HAS5300-8T = MG06SCA800E

HAS5300-12T = MG07SCA12TE

HAS5300-16T =MG08SCA16TE

Here is a full breakdown of the specifications of each Synology HAS5300 SAS Hard Drive:

Hardware Specifications HAS5300-8T

HAS5300-12T

HAS5300-16T

Where to Buy
General Capacity 8 TB 12 TB 16 TB
Form Factor 3.5″ 3.5″ 3.5″
Interface SAS 12 Gb/s SAS 12 Gb/s SAS 12 Gb/s
Sector Size 512e 512e 512e
Performance Rotational Speed 7,200 rpm 7,200 rpm 7,200 rpm
Interface Speed 12.0 Gb/s, 6.0 Gb/s, 3.0 Gb/s, 1.5 Gb/s 12.0 Gb/s, 6.0 Gb/s, 3.0 Gb/s, 1.5 Gb/s 12.0 Gb/s, 6.0 Gb/s, 3.0 Gb/s, 1.5 Gb/s
Buffer Size 256 MiB 256 MiB 512 MiB
Maximum Sustained Data Transfer Speed (Typ.) 230 MiB/s 242 MiB/s 262 MiB/s
Reliability Mean Time to Failure (MTTF) 2.5 million hours 2.5 million hours 2.5 million hours
Workload Rating 550 TB Transferred per Year 550 TB Transferred per Year 550 TB Transferred per Year
Warranty 5 Years 5 Years 5 Years
Power Consumption Supply Voltage 12 V (± 10%) / 5 V (+10/-7%) 12 V (± 10%) / 5 V (+10/-7%) 12 V (± 10%) / 5 V (+10/-7%)
Active Idle (Typ.) 6.62 W 4.36 W 4.46 W
Random Read / Write (4KB Q1) (Typ.) 9.87 W 7.80 W 8.12 W
Temperature Operating 5°C to 60°C (41°F to 140°F) 5°C to 60°C (41°F to 140°F) 5°C to 60°C (41°F to 140°F)
Non-operating -40°C to 70°C (-40°F to 158°F) -40°C to 70°C (-40°F to 158°F) -40°C to 70°C (-40°F to 158°F)
Shock Operating 686 m/s2 {70 G} (2 ms duration) 686 m/s2 {70 G} (2 ms duration) 686 m/s2 {70 G} (2 ms duration)
Non-operating 2,450 m/s2 {250 G} (2 ms duration) 2,450 m/s2 {250 G} (2 ms duration) 2,450 m/s2 {250 G} (2 ms duration)
Vibration Operating 7.35 m/s2 {0.75 G} (5 to 300Hz), 2.45 m/s2 {0.25 G} (300 to 500 Hz) 7.35 m/s2 {0.75 G} (5 to 300Hz), 2.45 m/s2 {0.25 G} (300 to 500 Hz) 7.35 m/s2 {0.75 G} (5 to 300Hz), 2.45 m/s2 {0.25 G} (300 to 500 Hz)
Non-operating 29.4 m/s2 {3.0 G} (5 to 500 Hz) 29.4 m/s2 {3.0 G} (5 to 500 Hz) 29.4 m/s2 {3.0 G} (5 to 500 Hz)

 

What Are The Benefits Of The Synology HAS5300 SAS Hard Drives?

A heavy focus from Synology when you even casually glance at the specifications pages on the HAS5300 NAS HDDs is on sustained performance and durability. This is completely understandable, given that these drives are for their more enterprise-led systems that will likely be working hard 24×7 for their whole system life – so you would only want to install hard drive media that can maintain any promised performance highs CONSISTENTLY as they are accessed – regardless fo the NAS server hardware or RAID configuration. In their pages, Synology state that their HAS5300 drives run on firmware optimized for critical workloads that matter. They allow Synology systems to repair degraded RAID arrays up to 27% faster than similar-class and capacity drives

Another thing that Synology are keen to highlight in the HAS5300 series is that along with that enhanced durability of these data centre-class drives over similarly priced Pro series drives from WD/Seagate (550TB vs 180/300TB annual workload rating), these drives utilize Synology specific firmware onboard, which can only be a good thing. Not only does this mean that drives can be updated in their internal firmware CONSIDERABLY easier than other drives, thanks to be manageable in the DSM software GUI – but also that rather than the drive featuring NAS/Server parameters that need to be a fraction broader for different Windows and Linux server architecture, the HAS5300 are geared SPECIFICALLY for Synology NAS systems.

I am still not completely in love with the idea that some of Synology’s latest systems have tighter compatibility/support options and the HAT5300, HAS5300 and SAT5200 are the only available drives (for the most part – 3-4 exceptions), but given Synology’s move in the last 2+ years to produce first-party options for any/all upgrades/accessories on their systems, this is still not a massive surprise! The only other question about the HAS5300 series I have is if/when Synology will introduce an SED (self Encrypted drive) or SIE (Sanitize Instant Erase – i.e. complete, fast and utter format) model of their own-brand drives, as these are available on the original Toshiba models that this series is built upon and given the grown demand for encryption on business class SAN/NAS systems, this seems to be a little slow coming.

When Will The Synology HAS5300 SAS Hard Drives Be Released?

The Synology HAS5300 Hard drives for NAS are now officially released, but I can imagine that stock will not be fully available in any kind of bulk available quantity for a week to two. Regarding pricing, it does seem rather different depending on where you look, with the Synology HAS5300-8T being listed in some stores at around £298 ex.VAT and the HAS5300-16T being listed at around £556 ex.VAT. How this will translate into dollars and euros, as well as their availability will become clearer in the next few days.

 


Articles Get Updated Regularly - Get an alert every time something gets added to this page!


This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

 

SEARCH IN THE BOX BELOW FOR NAS DEALS

Need Advice on Data Storage from an Expert?

We want to keep the free advice on NASCompares FREE for as long as we can. Since this service started back in Jan '18, We have helped hundreds of users every month solve their storage woes, but we can only continue to do this with your support. So please do choose to buy at Amazon US and Amazon UK on the articles when buying to provide advert revenue support or to donate/support the site below. Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] Terms and Conditions Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.  

 

 

❌