UniFi Cloud Gateway Fiber Review – Overkill?

UniFi has absolutely been slamming hardware releases in the first quarter of 2025. Last year, they launched a new NAS solution, and in the last few months, we’ve seen them hammer out a wide range of new surveillance accessories. However, February 2025 has seen a huge rejuvenation of a number of wired and Wi-Fi devices in their router and cloud gateway lineup. Although we’ve seen several impressive solutions added to their new Wi-Fi 7-equipped portfolio, probably the most hench one of all is the UniFi Cloud Gateway Fiber model, the UCG-Fiber. The popular UniFi Cloud Gateway series has always served as a much more compact and network-focused alternative to the bulkier UniFi Dream Machine and traditional router devices from the brand, but this new model really does scale the connectivity up to 11! Featuring multiple 10G connections spanning both copper and fiber, the system features PoE and multiple 2.5G LAN ports. Add to that arguably the most powerful internal hardware that the brand has yet rolled out (though realistically, UniFi doesn’t really choose powerhouse internal components normally anyway) and expandable M.2 NVMe storage, and what you have here is a system that manages to do everything that a bulky rack-mount-scale Dream Machine seemingly promises but in a physical scale that you can genuinely fit in your coat pocket—though I wouldn’t recommend doing that.

So let’s discuss the UniFi Cloud Gateway Fiber and whether it deserves your data!

UniFi Cloud Gateway Fiber (UCG-Fiber) Review – Quick Conclusion

The UniFi Cloud Gateway 7 Fiber is a prosumer/business device that does not overpromise and is quintessentially UniFi in its architecture—for good and for bad! There is a lot of good to talk about: almost unparalleled external network connectivity for its scale, the unbeatable utilization of the UniFi Network Controller software, ease of setup combined with a complexity of features and control—the UCG-Fiber does it all and does it phenomenally well. Small inconsistencies in the presentation, such as the M.2 slot adapter not being included with the initial retail kit, I find puzzling, however, and perhaps a little bit more wiggle room on the flexibility of the WAN/LAN on those 2.5G ports is open to debate (CORRECTION, You CAN adjust the 2.5G Ports to WANs, but you need to disable WAN services on the other 10G ports manually first). But those aside, it really is hard to fault. Plucky little box, and at $249 for a huge amount of scalability and expandability, you would be hard-pushed to find anything better at this price tag that can do what this can do—while still remaining largely license-free!

BUILD QUALITY - 9/10

HARDWARE - 8/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 9/10

8.6

PROS

Multi-Gigabit Connectivity – Supports dual 10G SFP+ ports, a 10GbE RJ45 port, and four 2.5GbE ports, allowing for high-speed networking.
PoE+ Support – One 2.5GbE port includes PoE+, enabling direct connection of UniFi APs, cameras, or other PoE-powered devices.
Integrated NVMe Storage Support – Allows installation of an NVMe SSD (up to 2TB) for UniFi Protect NVR functionality and other applications.
Compact & Fanless Design – Small form factor with silent operation, making it suitable for desktop or rack environments without additional noise.
License-Free SD-WAN & VPN Features – Includes WireGuard, OpenVPN, Teleport VPN, and Site-to-Site VPN without additional licensing costs.
Centralized UniFi Management – Seamlessly integrates with UniFi Network, Protect, and Talk, allowing for easy cloud-based management.
Stateful Layer 7 Firewall & IDS/IPS Security – Advanced traffic filtering, intrusion detection, and ad/content blocking for enhanced network security.
Lower Power Consumption – ARM-based quad-core CPU ensures efficient performance with lower heat output and energy usage compared to x86 alternatives.

CONS

Additional Cost for NVMe Tray – The M.2 SSD adapter tray is not included, requiring a separate purchase to enable internal storage.
Non-Upgradable RAM – Comes with 3GB of DDR4 RAM, which cannot be expanded, potentially limiting future scalability for advanced applications.
Lack of WiFi Support might be a pain for some on day 1

UniFi Cloud Gateway Fiber (UCG-Fiber) Review – Design

If you have ever been around or owned a UniFi device, you will be unsurprised to hear that the UCG-Fiber is easy on the eye, and a great deal of attention has gone into the design. Like the majority of UniFi devices, the system arrives with a dynamic and animated LCD panel that gives you real-time information about the traffic, utility of the device, and real-time information on IPS and network status.

Unfortunately, it is not a touchscreen, which isn’t the end of the world, but it’s a shame as a few other LCD-equipped UniFi devices have this feature, and some might assume that all of their devices follow suit. Needless to say, this LCD panel can have its brightness adjusted easily, be set to a schedule, or have the details it displays modified within the system settings somewhat.

The physical scale of this device, when future-set alongside a larger rack-mount-designed UniFi Dream Machine, is pretty bloody impressive. Arriving at 221mm by 127mm by 30mm, this thing is smaller than most ISP-free routers, yet crams in physical network ports and internal storage that I’ll touch on later. Additionally, the system is fanless and is completely silent when in operation.

Separated into multiple LAN and multiple WAN ports, the main traffic ports are all 2.5GbE Ethernet, and the system software supports numerous services for connecting VLANs, failover services, jumbo frame adjustments, and a plethora of network security settings that I will touch on later in the article. Given the wide-ranging bandwidth of all other connections on this device, I’m not sure anyone would have judged the brand if they tried to get away with one or two standard gigabit ports here. They really have scaled things up, and it’s pretty clear that this system is designed with tremendous future-proofing in mind. One of the individual 2.5G ports has something extra special, too.

One of the physical 2.5G ports also supports Power over Ethernet (PoE), which means that you will be able to take advantage of connecting smart network office peripherals for communication, or more likely, PoE-equipped cameras that you can connect and power via this port while using the UniFi Protect surveillance software installed on this device.

But I can understand how this single PoE port is intended more as an additional service for a locally deployed camera by the Cloud Gateway, rather than as a means to convince users to factor this in as a central point for their surveillance setup. Given the combination of copper and SFP connections on this device, it wouldn’t surprise me if one of the main factors preventing more PoE ports is simply heat generation at this scale.

However, one of the other arguably more general-purpose utilizations for this PoE port is to take advantage of one of the many multi-port PoE-powered network switches provided by UniFi in both small and medium form factors. Delivering up to 30 watts of power, which is enough to power either of the 2.5G fully equipped portable switches in the brand’s portfolio. Alternatively, thanks to the rather adaptable UniFi software that this system runs on, you can also take advantage of one of the many newly launched Wi-Fi 7-equipped PoE-powered AP devices that the brand recently rolled out. This single 2.5G PoE port provides both high power and high bandwidth performance to the U7, U7 Pro, U6 IP devices in the recent 2025 portfolio, and simply connecting one of these many AP devices to this single port allows you to immediately add an SSID tier to your network configuration in less than one minute—turning this hugely capable wired network management device into an all-purpose, business-class network router setup!

If you do choose to use this PoE port for a camera device, UniFi has a wide range of PoE-capable cameras spanning all the way to 4K, Edge AI services, and enterprise-grade surveillance equipment that, just like the wireless IP devices, can be added and deployed in less than a minute, with the UniFi Protect surveillance software already available on the UCG device with no license restrictions.

Using UniFi’s own cameras, you can utilize up to 12 HD cameras, 8 2K cameras, or four 4K cameras on this device. Alternatively, thanks to a changing stance by UniFi on their Protect platform, you can now also take advantage of third-party cameras that support ONVIF and better leverage existing surveillance equipment you may have in your home or office if you’re migrating your network setup over to the UniFi platform via the upgrade of a UCG-Fiber.

Moving away from those multiple 2.5G ports, we now need to talk about the other really impressive thing about the UCG-Fiber—and that is that this tiny box manages to arrive with three individual 10GbE connections. The UCG-Fiber features two SFP+ fiber 10GbE connections, but also, interestingly, an additional 10G Base-T copper connection as well. Given that these kinds of connections on a basic unmanaged switch would already push the price point of this device comfortably into the $200 mark, the fact that this system arrives with all of these connections, SSD scalability, UniFi capabilities, and PoE support all add up to this being phenomenal.

The UCG-Fiber has an internal switching support of 9.3Gbps performance, which, although may sound like less than the potential 40Gbps output that this system features, realistically, both the internal hardware profile this system has and the general use of this device were never going to max things out. And as long as the internal switching capacity of this system can match that of the largest possible single connection, I’m totally cool with this.

3x 10GbE connections mean that not only are you able to introduce an exceedingly high-performance WAN connection into your network that will be future-proof for at least a decade, but if you wanted to deploy a multi-site setup with fiber cabling between locations, there is a lot of compact yet powerful network packet handling on the table here! Plus, why not use another 10G port for a high-performance network switch and increase your broad network capabilities substantially, while still allowing great network traffic from the connected multi-port switch into your UCG-Fiber with ease? Finally, don’t overlook the benefits of introducing a 10GbE NAS into your UCG-Fiber, and either allow one user up to 1,000MBps transmission to the NAS or potentially 20 users to all enjoy gigabit network connection to that NAS. The potential for scalability on your network is phenomenal for such a small device.

However, it is worth highlighting that, as good as this is, I do have a little bit of a gripe with the way the brand has approached the 10G WAN/LAN connections on the UCG-Fiber. Although greater-than-gigabit internet speeds are becoming more common around the world, the availability of 10Gb internet is still pretty rare. While I can see the benefits of future-proofing by allowing multiple 10GbE connections, the fact that you cannot change one of the 2.5G ports on this device to a WAN if needed means that you are potentially losing out on quite a lot of network bandwidth. To elaborate, most users—even with high-performance internet services in their home or office—are unlikely to have greater-than-2.5GbE internet speeds for a good few years yet. Because the UCG-Fiber only allows two ports on this device to support WAN failover, that means that even if you were running basic sub-gigabit internet speeds like most users do, you are still restricted and potentially wasting the full capabilities of a 10G port on an ISP service that is never going to hit those heights. MASSIVE CORRECTION! You CAN chose to use the 2.5G ports as WAN/WAN2 and free up ALL the 10G ports if you like, however you need to ensure that WAN services are disabled on the existing 10G ports (setting them to LAN or DISABLED) first, and then the option to select ‘WAN’ or ‘WAN2’ on the 2.5G ports will appear. Really, REALLY pleased with this!

Another element that I have mostly positive, but not exclusively positive comments on is the M.2 NVMe SSD storage that this system supports. As mentioned, the UCG-Fiber allows you to install an M.2 NVMe SSD into the base of the system, and from there, you can use this storage to install multiple UniFi applications and services that will all run seamlessly from the UCG-Fiber network dashboard. These include automation, communication, and surveillance applications—all of which are license-free and included with the price of this system. Additionally, M.2 NVMe storage on this Gen 3×2 SSD line is going to provide fantastic performance and will ensure that particularly high-frequency services or high-demand services like AI-assisted surveillance setups run fantastically well here.

So, what is my problem with the way they have approached M.2 NVMe storage on the UCG-Fiber? It would be easy for me to criticize and say that the system should arrive with an SSD, but I’m not that naïve—at the $249 price this system comes in at, I think it would be unrealistic to assume that it would arrive with an SSD included. No, my problem isn’t that it doesn’t come with an SSD out of the box—my problem is twofold. Number one, in order to install an SSD inside the UCG-Fiber, you have to purchase a separate M.2 adapter tray that slides into the available base of the system. Who designed this??? And why do users have to purchase the SSD tray separately instead of it being included with the system?

I understand that users should be expected to buy their own scalable storage based on their capacity needs, but not including the tray that you need to insert the SSD into—and then charging an additional £15 for it—is just insane. My other issue is that although SSDs are less prone to physical or mechanical issues compared to traditional hard drives, they are not flawless.

SSDs—whether SATA or M.2—are still prone to occasional failures, and if an SSD fails, all the data on that drive is most likely lost. In the case of the UCG-Fiber, as the system only has a single M.2 slot, it does not support RAID (Redundant Array of Independent Disks), which would allow for a safety net by having another drive keep the data safe. Equally, the UCG-Fiber does not have any USB connectivity to allow for connecting a storage drive for periodic backups of your surveillance data that you may be creating regularly on this system. It’s a small detail, but I’m kind of surprised that this was not factored in during the design stage, given the huge importance of the storage drive on this system. In the grand scheme of things, I’m still grateful that this high-performance cloud gateway device has storage capabilities as comprehensive as it does—but it is by no means flawless.

The UniFi Cloud Gateway Fiber (UCG-Fiber) is powered by a quad-core ARM Cortex-A73 processor clocked at 2.2GHz. The Cortex-A73 is a relatively efficient CPU architecture that balances performance and power consumption, making it a suitable choice for a network gateway device. While not designed for high-performance computing tasks, this processor is more than capable of handling network routing, firewall management, VPN services, and deep packet inspection (DPI) without significant bottlenecks. The inclusion of Layer 7 firewall capabilities, IDS/IPS security measures, and traffic identification suggests that the CPU is optimized for handling packet filtering and security functions efficiently. However, its overall processing power is still limited compared to x86-based solutions found in enterprise-grade routers and gateways. Given its ARM-based architecture, the UCG-Fiber benefits from reduced power consumption and lower heat output, allowing for a compact, fanless design that operates silently while maintaining stable performance.

The UCG-Fiber is equipped with 3GB of DDR4 memory, which is a reasonable allocation for a device of this type. This amount of RAM ensures that the system can handle multiple concurrent processes, including traffic management, VPN sessions, intrusion detection, and SD-WAN operations without excessive slowdowns. While 3GB may seem modest compared to more powerful network appliances, it is sufficient for the expected workload of small to medium-sized networks.

The RAM configuration is non-expandable, meaning that users cannot upgrade memory for increased performance, which could become a limitation in scenarios where more demanding security and networking tasks are required. However, for general usage, including running UniFi applications, managing multiple VLANs, and handling routing tasks, the provided memory should be adequate. The combination of ARM-based processing and DDR4 memory allows the UCG-Fiber to deliver a balanced mix of efficiency and functionality, positioning it as a suitable choice for businesses and advanced home networks that require multi-gigabit connectivity with software-defined networking features.

UniFi Cloud Gateway Fiber (UCG-Fiber) Review – Software and Services

IMPORTANT !!!- Currently the Software review of the UCG-Fiber is in progress, but I have already reviewed the UCG-Fiber and UX7 devices which are very similar indeed. So, whilst I complete the UCG-Fiber review, I have included the software review of the other 2 devices below, as they are running near identical services and features (but with differences with regard to port/wifi features. I will be amending the below text very soon, but include it here to give a better understanding of what this UniFi controller software can do. Apologies for this in the meantime.

Realistically, no one should be spending inordinate amounts of time using the software that your router arrives with – that’s just a simple fact. Indeed, you want you router (or any network appliance) to just do it’s job! Therefore talking about just how good the UniFi network software is, and how the UniFi Dream Router 7 capitalized on it, is going get a mixed reaction depending on your own level of network knowledge and custom requirements. I will say straight away though that you will really, REALLY struggle to find a more capable and flexible router software at this price point. You will struggle to find ANY setting, config, adjustable parameter of control measure not included with the UCG-Fiber. First off, there is the mobile application. As the UCG-Fiber hosts the UniFi network software, ALOT of the iOS and Android official UniFi applications are supported by the UCG-Fiber.

Firs time setup of the router using the mobile application (you can use a desktop machine with your web browser if you prefer of course) is incredibly straight forward. The Router can be found via the local area network or Bluetooth within 2 minutes of it’s first power-on. One big misconception (I was guilt of this too a while back) was that you have to register a UI.com account online in order to use UniFi appliances. This is NOT true. You can set the device up without a UI account (and even WITHOUT an internet connection) and doing so just needs to you create a local administrator account. It is recommended to use a UI account of course, as it allowed for easier comms and access for your larger Unifi network, but it is by no means compulsory. You can also create a system backup (with your config data of users, settings, SSIDs, etc) and backup online if you choose – and then easier pull this backup if you wish during initialization easily.

Upon creating local credentials or resisting an online account, the router performs an initial internet performance test and then goes about setting up your router. Much like other recent UniFi releases, the system has a ‘gamer’ style installation screen that shows tips and guides on how to get the most out of your router – very rare in a router I will say.

The setup process takes around 2-3 minutes and after that, you have pretty much FULL control and access to the Router’s configuration from your mobile phone. You can definitely tell that UNiFi have put the hours in with regard to the UX of the mobile application. Routers (and switches for that matter) are NOT easy systems to try and simplify – let along ocndence in a compact mobile UI. However they really have excelled in the latest version of their software.

Management of individual devices on the network are all presented intuitively in the app, and alongside their position/priority/bandwidth/consumption being presented, you can also use the app to institute controls and rules for 1, some or all devices on the fly – with instant implementation. Again, it’s no the fact that you can ‘do’ this that I am impressed by, it is the ease and intuitive way it is presented in a mobile app.

The same applies to the physical connections and wireless connections on the UCG-Fiber itself, with full remote control with the app to bridge, negotiate, failover, vLAN, disable, etc any port easily – as well as create new SSIDs, assign channels and push client devices around on the router side in 3-4 clicks. All of this is performed responsively and easily in the app.

On the subject of client devices, let’s discuss that WiFi 7 support. WiFi 7 opens up ALOT of performance and general bandwidth advantages. WiFi routers and client devices have been around now for around 10-12 months, as well as the increase in availability globally of greater than Gigabit internet services. Most internet service providers have already a router with their services – but not many provide WiFi 7 routers with their services, even at greater than gigabit speeds. So, what is the advantage? For the quicker (ish) version, watch my video below.

Now, you might well not have any devices right now that are WiFi 7, but plan on upgrading to WiFi 7 at some point in the further over a PCIe upgrade card. Even if you are using a system that lacks a PCIe upgrade clot, you can get small m.2 upgrade cards for a WiFi 7 / 802.11be upgrade for as little as $15-20 here. Hell, you do not even need to open up your system, as you can now get WiFi 7 to USB adapter upgrades for as little as $25-30, which is exactly what used when testing the router with my Windows 11 laptop for the earlier testing of the UCG-Fiber.

The USB-to-WiFi 7 Adapter I used in my testing of the UCG-Fiber was this one HERE on Aliexpress.

This USB to WiFi 7 adapter allowed for immediate 802.11be connectivity between my laptop and the UniFi Dream Router 7, over the now available 6Ghz band. Although there is more to WiFi 7 and this router than just that additional frequency. The UCG-Fiber SUPPORTS 2.4Ghz and 5ghz (just like all WiFi 6 and 6E routers), but crucially alongside the 6Ghz band allowing for more active concurrent connections, you are also able to take advantage of 320Mhz bandwidth (till now WiFi 6/6E only allowed for up to the 160Mhz connections). This means that you have a greater bandwidth per connection – though you can only have a finite amount of connections at 320Mhz at once. This is COMBINED with WiFi allowing for overlapping connections too and 1 device enjoying multiple connections at once.

This means that not only can you match the speed of a normal wired gigabit connection, but you can ABSOLUTELY SMASH IT! As you can see below, using this USB adapter on my regular windows laptop, connecting to the UniFi Dream Router 7 over the 6Hz band – I was able to hit 2.8Gb/s wireless connectivity!!! That is even faster than using one of the physical 2.5GbE connections on the UCG-Fiber.

It’s worth remembering though that WiFi 7 is NOT perfect and although it presents a lot of benefits for bandwidth improvements, reduced latency and increased encryption options, support of the wider frequencies and abilities of a larger WiFi 7 populated network are still a little ‘early days’.

By that, I mean that although you can hit high performance with 320Mhz connections, the actual radio frequency opened up right now (depending on your region) is pretty slim. The UCG-Fiber router DOES show you the full radio spectrum, separated dynamically with each 20/40/80/160/320Mhz block that is spread across 2.4/5/6Ghz – but ALOT of it is still unavailable to use in many regions.

These limitations are likely going to reduce over time and, therefore you have to look at a decent % of the WiFi capabilities of the UniFi Dream Router 7 as ‘future proofing’ – but just keep in mind that although you can deploy ALOT of wireless (and wired) devices in a UCG-Fiber managed environment, those peak 802.11be/WiFi 7 bandwidth improvements are going to be shared only by a few client devices – in reality the real benefits are going to be felt with the opening up of the 6Ghz frequency allowing for more devices to be spread over all three frequencies and bands at 80/160Mhz.

Anotehr note to keep in mind is that the 6Ghz band has a shorter area of effect than 5Ghz (which likewise has a shorter area than WiFi 5). So WiFi7 is at it’s best in closer proximity without walls – more as a cable alternative if you are in the same areas as your UniFi router. But when I connected to a 10GbE NAS (connected to the 10GbE port of my UCG-Fiber), I was able to hit 187MB/s write easily (though read performance was oddly inconsistent – possibly related to the NAS, still investigating – TBC) in CrystalDiskMark.

Likewise, similar testing with the WiFi 7 USB Adapter, through the UCG-Fiber and at the 10GbE connected NAS hit 260MB/s+ easily. Once again, I would have easily respected this if I had been connecting with the NAS using the 2.5GbE ports – but I am hugely impressed that I was able to hit this benchmark over a WiFi connection (thanks to that 2.8Gbps 6Ghz setup). Respect!

Additionally it is very easy to monitor the position, WiFi coverage, Channel and performance of any device connected to the UCG-Fiber controller software. Also allowing you to create rules o the fly to automatically manage them later as/when devices arrive.

These same controls also extend all the way down to the ISP input of the UCG-Fiber AND IF YOU HAVE MULTIPLE uNIfI AP/Nodses in your setup, can control how/where bandwidth is allocated and the priority of devices/nodes that are unique to your own deployment.

The dashboard features a grouped UI and analytics overview that allows you to see the price traffic that is going into a physical LAN, grouped VLAN or just a single devices on the network – allowing you to see the sites/services/geo data in real time too!

And likewise as before, you can extent these analytics all the way to the root UCG-Fiber router to see EVERYTHING happening in realtime in your network and internet connectivity.

Blacklisting (and whitelisting occasionally) or certain websites is also easy to action manually when needed too – or you can import an existing database of ‘bad’ site lists directly into the UCG-Fiber to simplify the process.

Once rules, priorities, orders of services and limits have been created, you can then apply them to individual devices, networks, groups, vLANS, etc – even to a physical LAN port if needed. These rules are completely customizable and if 1 parameter is changed on the fly, it immediately actions across all selected devices.

It’s also worth highlighting that UniFi has its own enterprise user identity service (‘Identity Endpoint’) that you can apply to devices if you want to ensure that connected devices on the LAN or WAN are truly secure (client auth tools on each device) and this extends to the VPN and UniFi network client device access too.

I also should stress that although the UCG-Fiber seems like a very, VERY proprietary router – UniFi do NOT lock you into having to create an account with them or use only their services. You can set the system up for LOCAL ONLY management and control if you choose. Or even hybrid the two and create 1 secure ‘Identity Endpoint sys admin’, but others are ‘local’ only – nice balance tbh.

And new users (super user or billy basic!) can be created, modified and deleted at any time!

Control and configuration of the UCG-Fiber are very straight forward and there are pretty high end configuration options in the backend of the system to control both the local network setup, as well as WiFi connectivity out the box (or added later in the case of systems like the UCG Fiber via the U7/U7 Pro/U6).

And professional SI’s/Technicians can set the system to ‘truly open’ if they wish, and this can be securely controlled as needed. This allows for opening up frequencies in the case of a WiFi setup down the road and advanced settings related to antenna gain/adaption.

The system configuration and control are surprisingly extensive for a $279 router and puts it well, well into the realms of an enterprise-grade solution, despite its Prosumer/SMB price point.

Unsurprisingly, the UCG-Fiber has internet speed test tools (either using the native web browser GUI or the WiFiman application for Android/iOS).

But its goes further, with the ability to monitor the packet management in your network (covered earlier) to such as extent that you can even block the server calls to specific sites/vendors that are going through the UniFi manager and block them SPECIFICALLY. Eg, want to keep google services, but NOT YouTube (either for work/professional reasons, or because of your kids homework deadline?) – you can do that REALLY easily.

And you can apply these rules easily and analytics with ease via the topographical network monitoring window. So you can visually see the devices in the network, then apply the rules, in case a new device gets sneakily added to circumnavigate any limits/restricts in palce.

And if you see a sudden spike in internet use, you can (in seconds) isolate the device that is causing it AND see what it is – allowing yo to block/monitor as needed.

Equally, you can set some pretty extensive security provisions to pre-emptively kick in when an unknown device arrives on the scene, or if an existing device in the network begins to be suspicious.

The same goes for creating day 1/100 rules for port forwarding, traffic management and Firewall rules. All of this is HUGELY customizable and most pages in the UniFi GUI feature both ‘simple/easy’ views, as well as much more complex advanced views as needed at the top of each page.

The multiple LAN ports can also be scaled up/down as needed if your existing network is not quite ready for the full network connectivity of the UCG-Fiber too.

And thanks to the UCG-Fiber featuring multiple WAN ports, you can decide how you want to handle multiple ISP services into your home/business, to separate/combine/balance between them with ease across your connected devices.

Additionally, each WAN port can be adjusted to a ‘WAN’ or ‘LAN’ roles as needed – even disabled. So, whether it is as a failover internet connection, or that you want to free up that 10GbE port for use as a LAN – The choice is yours!

Also, as mentioned earlier, as the system supported internal storage via the slot, you can go ahead and run UniFi Protect surveillance software too – as well as as an additional switch to the available LAN ports, for cameras or add a camera to the POE port.

There are actually several different surveillance, communications, display or smart appliances in the UniFi portfolio that can be installed on the internet storage drive + also means you have more scope for that POE ready port.

It gets to a point (perhaps) that there are TOO many security and configuration options, and people looking for just a router to ‘just do it’s job’ will be somewhat overwhelmed. Most of the important settings are already set pretty well, but I never the less recommend first time buyers take the time to explore the configuration options present in order to better understand what they are buying here in terms of it’s abilities to protect your network and internet services.

This extends right the way down to the more advanced prevention and intrusion protection measures (Dark Web blocking too). Again, pretty advanced for many, but take the time to look through them if you purchase the UCG-Fiber.

And if in doubt, you can use the UniFi Teleport VPN service to anonymize your site-to-site exchanges (again, very ‘first party’ and more about SD-WAN level stuff, but does form part of the purchase here).

Also, keep in mind that the UCG-Fiber has the option to create Airgaps in it’s wired network AND WiFi connectivity (if you want to add that) that allows you to create automated access times – especially useful for businesses who want to lock down access outside of the usual 9-5 operational hours.

If you want to use WiFi services, yo can create multiple SSIDs of varying degrees of access – and yes, all the controls on security, speed, antenna, frequency, vLAN, etc are all present here too.

When creating those VLANS, you can add specific physical ports, IDs, WiFi APs etc to that vLAN to segregate your network as securely as possible.

And from there you can adjust the vLAN configuration in terms of it’s smooth operation and security directly from the network management panel (as well as view all active vLANS on one page if needed to see how they interact/clash + show each device you have moved in/out of them easily.

And again, all packet management/monitoring are available within the vLAN if you need.

If this all sounds tremendously intimidating, there is a much, MUCH easier 1 panel view in the ‘Insights’ tab that just shows each current network branch and it’s connections/clients in a list format.

Not good enough? How about a global view that shows the data packet exchange in real time with regard to each region (i.e worried that your data is being harvested to an overseas location, this will show you which countries are currently connected with on your UCG-Fiber for upload/download (websites? server? It’s easy to check and find out here!).

Bottom line – the bulk of the UniFi Control Software here is available on the majority of UniFi Router, Express, Cloud Gateway and Dream Machine devices – but the EXTENT to which you can use it is heavily dependent on the device you buy. In the case of the UCG-Fiber, you have a fantastic balance of Day 1 control sure, but you have an even better management and scalability on the system for when your ISP services double/triple, as well as the number of devices in your network expand.

UniFi Cloud Gateway Fiber (UCG-Fiber) Review – Conclusion and Verdict

The UniFi Cloud Gateway Fiber (UCG-Fiber) presents itself as a compact and capable network gateway solution that brings high-speed connectivity, PoE support, and integrated storage options to UniFi’s growing lineup of cloud-managed devices. Its dual 10G SFP+ ports, a 10GbE RJ45 port, and multiple 2.5GbE ports make it a strong option for users who require multi-gigabit networking in a small form factor. The inclusion of PoE support on one of the 2.5GbE ports adds a level of flexibility, allowing for directly connected UniFi APs or cameras without requiring an external PoE switch. Additionally, the support for NVMe SSD storage enables on-device UniFi Protect NVR functionality, which may be useful for businesses and users looking to consolidate their networking and surveillance infrastructure. From a software perspective, the UniFi Network, Protect, and Talk applications provide a familiar and well-integrated ecosystem that benefits from centralized management and cloud access. The license-free SD-WAN and VPN services also add value for users requiring secure remote access and site-to-site networking.

However, the UCG-Fiber is not without its drawbacks. The lack of flexibility in WAN port assignment may be a limiting factor for some users, especially those who do not have 10GbE WAN connectivity and would prefer to configure one of the 2.5GbE ports as a WAN interface (Correction, changing 2.5G ports to WAN/WAN2 is supported, just requires small assignment changes). The requirement to purchase a separate M.2 SSD adapter tray is another downside, as it adds an additional cost for users who intend to use the NVMe storage option. Additionally, with only 3GB of non-upgradable RAM, there could be concerns about long-term scalability if future UniFi software updates demand more system resources. While the ARM-based CPU is efficient, it does not match the performance of higher-end x86-based networking solutions, which may affect performance in environments with high packet processing demands. The absence of USB connectivity for external backups is another small but notable omission. Overall, the UCG-Fiber is a well-rounded networking device with a strong focus on multi-gigabit connectivity, PoE integration, and UniFi software compatibility, but it may not be the ideal solution for users with more complex WAN requirements or those needing expandable memory and storage flexibility.

Join Inner Circle

Want to follow specific category? Also Read...Ubiquiti Launches Three New UnUniFi Cloud Gateway Fiber (UCG Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

UniFi Launch a MASSIVE range of 10GbE PoE APs and Switches – The New XG/XGS Series

The UniFi U7 Pro XG and U7 Pro XGS is ANOTHER expansion of Ubiquiti’s WiFi 7 access point lineup (I swear, it’s like the 3rd/4th this year or something), bringing 10GbE Power over Ethernet (PoE) support to the series for the first time. These APs aim to address a major limitation of previous models—network bandwidth bottlenecks at the wired uplink—by allowing full utilization of multi-gigabit wireless speeds. The inclusion of 10GbE uplinks ensures that high-throughput devices, particularly those leveraging WiFi 7’s Multi-Link Operation (MLO) and wider channel support, are not constrained by a 2.5GbE or lower-speed connection to the wired network.

Accompanying the launch of these access points is a new range of UniFi XG series switches, designed to deliver PoE+ and PoE++ power while providing high-bandwidth connectivity across multiple wired and wireless clients.

The XG switch lineup includes four models: two high-capacity rackmount switches (24-port and 48-port) aimed at enterprise and data-heavy environments, a 10-port rackmount switch, and an 8-port desktop model designed for smaller-scale deployments. These switches not only ensure full 10GbE connectivity for the new APs but also introduce 25G uplink capabilities in the higher-end models, allowing for future network scalability and aggregation improvements.

With these new releases, Ubiquiti is targeting high-performance network environments, including businesses, prosumers, and enterprises that require low-latency, high-bandwidth connectivity across multiple access points. The transition from 2.5GbE to 10GbE in UniFi’s AP lineup reflects a broader industry shift toward higher-capacity wired backbones to match advancements in wireless technology. These products are particularly suited for scenarios involving high client densities, large-scale WiFi deployments, multi-gigabit internet connectivity, and demanding applications such as cloud computing, video conferencing, and real-time data transfer. By integrating 10GbE PoE APs with a full suite of supporting switches, UniFi is providing a comprehensive ecosystem for users looking to future-proof their network infrastructure. Whether deployed in corporate, hospitality, industrial, or high-end residential environments, these devices represent a step forward in ensuring WiFi 7 performance is not bottlenecked by wired limitations.

Update – The U7 Pro XG and U7 Pro XGS APs are NOW Available. The Pro XG Swtich Series is still TBC at time of writing

The UniFi U7 Pro XG and U7 Pro XGS 10GbE PoE WiFi 7 APs – Design and Connectivity

The UniFi U7 Pro XG and U7 Pro XGS maintain the familiar circular form factor that UniFi access points are known for, but with some notable refinements. The XGS model is slightly larger than the XG, a difference primarily due to its additional spatial streams and enhanced internal architecture. Both APs feature a polycarbonate outer shell with a metal internal frame, which serves to improve heat dissipation and ensures they remain fanless despite their higher performance. This passive cooling approach helps maintain silent operation while keeping temperatures within optimal ranges, even under heavy loads.

A qwerky (yet nonetheless requested!) design change in these models is the introduction of dual-color options for the first time in UniFi’s AP lineup – kinda blows me away that this is weirdly rare in these products in 2025. Users will have the choice between black and white, allowing for greater flexibility in deployments where aesthetic considerations are important, such as in modern office spaces, high-end homes, or retail environments.

Additionally, UniFi has stickable interchangeable covers for other APs in their line up, though details on availability and customization remain unclear at launch if these will be available on the XG/XGS series

To accommodate higher power demands and increased performance, UniFi has optimized thermal efficiency in both models, leveraging passive cooling techniques to maintain stability under continuous high-load conditions. The metal internal frame aids in efficient heat dissipation, preventing thermal throttling and ensuring long-term reliability. While these APs have a higher power draw than previous UniFi models—22W for the XG and 29W for the XGS—this is a necessary tradeoff for their improved bandwidth and increased spatial streams. Given their fanless design, proper placement—such as ceiling or wall mounting in areas with adequate airflow—is recommended to maintain consistent performance over time.

The most important functional change in these APs is the 10GbE PoE uplink, replacing the 2.5GbE PoE standard found in previous UniFi WiFi 7 models. The addition of 10GbE PoE+ (XG) and PoE++ (XGS) allows these APs to fully utilize WiFi 7’s increased throughput potential without encountering a wired bottleneck. The shift to 10GbE connectivity makes these access points particularly suited for environments where high-bandwidth, multi-client performance is essential, such as large-scale office deployments, conference centers, and high-density public spaces.

With maximum power consumption rated at 22W for the XG and 29W for the XGS, both APs require PoE switches capable of delivering sufficient power at 10GbE speeds. This makes them best suited for deployment alongside UniFi’s new Pro XG series switches, which offer 10GbE PoE across multiple port configurations. For users without a 10GbE PoE switch, UniFi has also released a PoE to mains adapter a while back supporting 10GbE passthrough, allowing these APs to be powered while connected to a standard non-PoE 10GbE switch.

These refinements in design, thermal management, and connectivity demonstrate UniFi’s continued push toward enterprise-grade wireless networking, ensuring WiFi 7 devices can operate without artificial bottlenecks imposed by wired infrastructure.

The New U7 Pro XG/XGS APs vs the U7 Pro and U7 Pro Max APs

The U7 Pro XG and U7 Pro XGS build on the foundation of the U7 Pro and U7 Pro Max, but with a focus on eliminating wired bottlenecks. While all four models support WiFi 7, the key distinction between the Pro XG/XGS and the earlier U7 Pro models lies in their uplink capabilities. The U7 Pro and U7 Pro Max are limited to 2.5GbE PoE, which is adequate for most WiFi 7 workloads but can become a constraint when multiple high-bandwidth clients are connected simultaneously. The Pro XG and XGS, by contrast, introduce 10GbE PoE, ensuring that the wired infrastructure can keep pace with the wireless throughput.

The spatial stream configuration is another notable difference. The U7 Pro XG (6-stream) and U7 Pro XGS (8-stream) allow for higher simultaneous throughput across more devices, compared to the U7 Pro (4-stream) and U7 Pro Max (6-stream). This makes the XG and XGS models better suited for high-density deployments, particularly in offices, event spaces, and public environments where hundreds of devices may be connected at once. The Pro XGS, in particular, offers 4×4 MIMO on the 5GHz band, significantly improving performance and efficiency for mid-range frequencies compared to the U7 Pro Max.

Another area of distinction is power consumption. The Pro XG and XGS models require more power—22W for the XG and 29W for the XGS, compared to 21W for the U7 Pro and 25W for the U7 Pro Max. This is a necessary tradeoff for their higher performance and increased uplink capacity, though it does mean PoE+ or PoE++ switches are required. Additionally, the Pro XG/XGS feature an updated chassis design, a dual-color option (black or white), and interchangeable covers—features not found on the U7 Pro and Pro Max.

Ultimately, the U7 Pro XG and XGS are designed for users who need 10GbE uplink support, either because they already have a 10GbE network or plan to upgrade to UniFi’s new 10GbE PoE switches. For users with a 2.5GbE or slower wired infrastructure, the U7 Pro and Pro Max remain viable choices at a slightly lower price point. However, as WiFi 7 adoption grows and multi-gig networks become more common, the Pro XG and XGS offer better long-term scalability.

The New Pro XG Switch Series – ProXG 8/10/24/48 Port L3 Switches

Alongside the U7 Pro XG and U7 Pro XGS, UniFi has introduced a new lineup of 10GbE PoE switches, designed to provide sufficient power and bandwidth for these high-performance access points. The Pro XG switch series consists of four models, each tailored for different network scales. These include two rackmount models (24-port and 48-port), a 10-port rackmount version, and a compact 8-port desktop model. Each switch is L3-capable, allowing for advanced network segmentation and routing, and includes PoE+ or PoE++ support, ensuring seamless integration with UniFi’s latest APs and other PoE-powered devices.

Pro XG 24 PoE Switch

The Pro XG 24 PoE Switch is a 1U rackmount switch designed for mid-sized network deployments that require a balance of high-speed wired connectivity and PoE power delivery. It features 16x 10GbE PoE+++ ports and 8x 2.5GbE PoE+++ ports, making it suitable for networks that mix WiFi 7 access points with multi-gigabit wired clients.

Additionally, it includes 2x 25G SFP28 ports for uplinks to higher-speed network infrastructure or aggregation switches. With a total PoE budget of 720W, it provides ample power for multiple APs, IP cameras, or other PoE devices without the risk of power limitations.

Pro XG 48 PoE Switch

For larger-scale environments, the Pro XG 48 PoE Switch offers a higher port density and greater PoE capacity. It includes 32x 10GbE PoE+++ ports and 16x 2.5GbE PoE+++ ports, making it a high-performance choice for dense enterprise networks. Like the 24-port version, it also features 4x 25G SFP28 uplinks, ensuring sufficient bandwidth for connecting to core switches or high-speed backbones.

The PoE budget is increased to 1080W, making it an ideal choice for deployments that include multiple high-power PoE devices such as security cameras, VoIP phones, and UniFi’s latest APs.

Pro XG 10 PoE Switch

The Pro XG 10 PoE Switch is a compact rackmount switch aimed at smaller business or prosumer setups that still require 10GbE PoE connectivity. It features 10x 10GbE PoE+++ ports and 2x 10G SFP+ uplink ports, providing a balance between port availability and high-speed connectivity.

With a total PoE budget of 400W, this switch is suitable for environments where a handful of high-performance APs and a small number of wired clients need reliable power and bandwidth. Its 1U form factor allows for easy integration into existing rack setups while maintaining L3 switching capabilities for network segmentation and security.

Pro XG 8 PoE Switch

For users who need 10GbE PoE in a desktop-friendly format, the Pro XG 8 PoE Switch provides high-speed connectivity without the bulk of a full rackmount switch. It includes 8x 10GbE PoE++ ports and 2x 10G SFP+ uplinks, making it a suitable choice for small offices, home labs, or network expansions where rack space is limited.

The 155W PoE budget is lower than its larger counterparts, but still sufficient for a few high-powered APs or other PoE devices. Unlike the rackmount models, this switch does not include an LCD control screen and is instead managed entirely through the UniFi software interface.

The UniFi XG switch lineup is designed to complement WiFi 7 APs by eliminating network bottlenecks at the wired infrastructure level. These switches provide a scalable, high-performance backbone for enterprise, business, and prosumer deployments, ensuring that wireless speeds are not limited by outdated switch technology.

Should You Care About the UniFi XG Series of WiFi APs and Switches? Verdict & Conclusion

The UniFi U7 Pro XG and U7 Pro XGS introduce 10GbE PoE to UniFi’s WiFi 7 lineup, resolving a key limitation of previous models by eliminating the wired uplink bottleneck. The Pro XG (6-stream) and Pro XGS (8-stream) offer higher client capacity, better multi-device performance, and a redesigned chassis that introduces dual-color options for more discreet deployments. Their fanless design and metal internal structure improve thermal management, making them suitable for continuous high-performance use. However, higher power consumption (22W for the XG, 29W for the XGS) means that PoE+ or PoE++ infrastructure is required, which could be a drawback for users with older PoE switches. Additionally, while the 10GbE uplink is a significant upgrade, users without 10GbE-capable networks may not see immediate benefits. Despite this, for those already investing in high-bandwidth networking, these APs offer superior long-term scalability compared to the U7 Pro and Pro Max.

The Pro XG series switches provide a much-needed 10GbE PoE solution to support UniFi’s latest APs and other high-power PoE devices. The lineup includes rackmount options (24-port and 48-port models) with 25G uplinks, a compact 10-port rackmount switch, and an 8-port desktop model for smaller deployments. Each switch is L3-capable, offering advanced routing and VLAN segmentation, and they provide substantial PoE budgets ranging from 155W (desktop model) to 1080W (48-port model). These switches solve the lack of 10GbE PoE options in the market but come with some trade-offs, including higher power draw and potential noise levels in larger models. The desktop version lacks an LCD screen, and pricing—though not yet finalized—will likely position these above existing UniFi multi-gig PoE switches. However, for those building a true high-performance wired and wireless network, these switches represent a genuinely unique step forward in the standard of PoE devices in the market – no really.

We are currently testing the U7 Pro XG/XGS access points and the XG switch series, gathering real-world performance data on throughput, power efficiency, and thermal management. A detailed review will follow soon, focusing on WiFi 7 performance under load, 10GbE PoE implementation, and compatibility with existing UniFi infrastructure. Our tests will also evaluate how well these APs handle multi-client environments and whether the 10GbE uplink translates to real-world advantages over 2.5GbE models. If you’re considering an upgrade to WiFi 7 or planning a 10GbE PoE deployment, stay tuned for our full analysis, where we’ll break down whether these new devices are truly worth the investment.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

Want to follow specific category? Also Read...UniFi UNAS Pro - 6 MONTHS LATEUniFi USB4/TB4 to 10GbE AdapteWeek 11 Tech Roundup – UniFiUniFi U7 Pro XG and XGS 10GbE Week 10 Tech Roundup – AOOSTUniFi U7 Lite and U7 In-Wall RUniFi U7 Lite and U7 In-Wall RUbiquiti Launches Three New UnUniFi Cloud Gateway Fiber (UCGUniFi Express 7 Review (UX7) Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

UniFi Express 7 Review – The Affordable UniFi Gateway?

UniFi has seriously hammered the subject of Wi-Fi 7 into their existing portfolio at an alarming speed, but it’s easy to forget that just half a year ago, there wasn’t a single Wi-Fi 7 solution in their lineup. Fast forward to February 2025, and they’ve now established every single kind of Wi-Fi 7 home/business appliance you could ever need. The latest entry into this product range is the compact and expandable UniFi Express 7. Serving as a compact and affordable entry point into establishing your own UniFi network, this device removes many of the physical Ethernet connections found on a typical router and instead prioritizes a small but easily expandable wireless networking solution to grow your network ecosystem. Arriving at $199, the UX7 was launched alongside the UniFi Dream Router 7 (UDR7) and UniFi Cloud Gateway Fiber (UCG-Fiber)—three very similar devices designed to serve different kinds of Wi-Fi/wired network deployments, all offering a similar level of network control that, until now, was only really available in the UniFi Dream Machine series. However, the UniFi Express 7 is the most compact of the three new releases, and with that, it also scales back some of the feature sets found in those more powerful devices. So, is the UniFi Express 7 the best gateway device for your needs? And does its focus on gradual network expansion over out-of-the-box hardware features make it the right fit for your growing home or business network? Let’s find out in this UX7 review.

UniFi Express 7 Review – Quick Conclusion

Honestly, I kind of wish UniFi had launched the UX7 about six months ago. The UniFi Express 7 gateway is an impressive little device, and when you factor in the license-free architecture, alongside its $199 price tag for a fully Wi-Fi 7, 6 GHz-ready box, it’s hard to call this bad value. However, launching this device between the UniFi Dream Router 7 (UDR7) and the UniFi Cloud Gateway Fiber (UCG-Fiber) makes it look like the weaker option of the three. And while the UX7 certainly has network expandability and appeal, I strongly recommend anyone considering it to first check out the UDR7 or UCG-Fiber. That said, for its niche, highly scalable, and modular network appeal, the UX7 delivers exactly what UniFi promises. It’s certainly worth the $199 price tag, but keep in mind that it is designed first and foremost as a network gateway. You will struggle to fully unlock its potential without integrating a UniFi switch or expanding into an existing UniFi network.

BUILD QUALITY - 8/10

HARDWARE - 8/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 8/10

8.2

PROS

Affordable Entry Point – At $199, it’s one of the most budget-friendly ways to start a UniFi network with Wi-Fi 7 capabilities.
Compact & Energy Efficient – Small footprint (11cm²), lightweight (422g), and low power consumption (22W max) make it ideal for home and office environments.
Wi-Fi 7 & Tri-Band Support – 2.4GHz, 5GHz, and 6GHz bands with Multi-Link Operation (MLO) for better speed, lower latency, and improved reliability.
10GBASE-T WAN Port – Supports high-speed internet connections, making it future-proof for faster broadband rollouts.
Scalable with UniFi Ecosystem – Easily integrates into an existing UniFi setup with mesh Wi-Fi, UniFi switches, and other devices.
Powerful UniFi Software – Full UniFi Controller suite with advanced network management, security, VLANs, and traffic analytics.
USB-C Power Input – Simple and universal power delivery, allowing for flexible placement and easy powering via third-party adapters.

CONS

Limited Wired Connectivity – Only one 2.5G LAN port (no PoE), making wired expansion less convenient compared to UDR7 or UCG-Fiber.
No Built-in Storage – Cannot run UniFi Protect or other UniFi applications natively, requiring external UniFi hardware for advanced services.

UniFi Express 7 Review – Design and Connections

Considering that this tiny device features tri-band Wi-Fi, 10G networking, and 2.5G networking, it’s kind of bonkers how small it is. Equipped with an internal quad-core ARM processor and 3GB of DDR4 memory, these modest yet highly capable internal components are more than enough to keep your data moving smoothly. The $199 launch price of the UX7 puts it slightly closer to the price of most Pro-sumer routers. While it’s not overpriced, some users may question whether there are better, more hardware-capable devices available at a similar price point in early 2025.

However, the main appeal of that price point is not exclusively about the hardware, and you have to factor in that this device is bundled with the UniFi software, offering full integration and utility of said hardware. This tiny box is able to host full control of a UniFi network, managing—via a single pane of glass interface—over 30 individual UniFi-connected/adopted devices and well over 300 clients at any given time. A big part of the appeal of UniFi products is that single ecosystem, and once you factor in that platform alongside the hardware, the $199 price tag starts to make a lot more sense.

Although the system features two copper connections on the rear, the priority of the device will always be Wi-Fi connectivity. This small box is able to cover up to 1,500 square feet of wireless connectivity, but do factor in walls and rooms—of course! A lot of this coverage depends on the antenna and frequencies your client devices choose to use, and in that regard, the UX7 continues to push the boundaries.

Scaling things up from the previous generation UniFi Express device, the UX7 supports Wi-Fi 7, Wi-Fi 6E, Wi-Fi 6, and traditional legacy Wi-Fi. Although the device has no external antenna, there are strategically placed antennas throughout the inside of this device. Thanks to the increased 6 GHz frequency access via the 2×2 6 GHz antennas inside and Wi-Fi 7’s utilization of 320 MHz channels, this opens the door to substantial performance increases in the UX7 over its predecessor.

Additionally, Wi-Fi 7 integrates Multi-Link Operation (MLO), which means Wi-Fi 7-supported client devices can create multiple simultaneous connections over different frequencies, drastically enhancing wireless performance—to the point where it dwarfs traditional wired connections.

The 6 GHz band has a shorter coverage distance than 5 GHz, and likewise 5 GHz has a shorter range than 2.4 GHz. Although Wi-Fi 7 certainly solves many issues related to maximizing available radio frequencies, keep in mind that distance will still be a factor. Because of the small scale of this device, there are questions about true distance coverage compared to a router with more antennas and external antennas. Depending on the number of simultaneous frequencies via MLO that your client device can utilize, the maximum performance potential of this device will differ. However, across all of the available bands, you can achieve:

• 688 Mbps maximum bandwidth on the 2.4 GHz frequency,
• 4.3 Gbps performance on the 5 GHz frequency,
• A whopping 5.7 Gbps potential on the 6 GHz frequency.

Consider these more of a guideline to the larger shared bandwidth across multiple client devices, but nevertheless, they still indicate the performance potential of this tiny box once it’s integrated into your network. Although we will delve into more detail about security and encryption later in the review, it’s also worth highlighting that this system supports encrypted protocols all the way up to WPA3 for wireless transmissions. The UniFi Controller software provides an almost unrivaled level of network security management and troubleshooting, with controls extending down to individual devices, groups, VLANs, and MAC addresses.

This means that even if you begin integrating third-party hardware into your network environment or stick to UniFi client devices as you expand upon this gateway device, the lock-and-door approach to your ISP services will always be significantly tighter thanks to having the UX7 as your gateway. Moving over to the wired connections, the system features a 2.5G Ethernet port that is utilized as a LAN connection. This means you can integrate an existing switch and expand your UniFi network toward more wired devices, as well as creating multiple virtual LAN arms in your network environment.

Unfortunately, this 2.5G port does not support Power over Ethernet (PoE), which means any connected devices will need their own power source. This is a shame, because both the simultaneously released UDR7 and UCG-Fiber devices each include a PoE port, making wired expansion with UniFi switches much cleaner and more convenient.

Nevertheless, it’s good that standard Gigabit Ethernet is absent in favor of 2.5G Ethernet, allowing for 2.5 times the performance of traditional and legacy networks.

Interestingly, the UX7’s WAN port is a 10GBASE-T copper connection! Most users would have assumed that this compact device would arrive with 10G SFP+, as is common with most UniFi devices. However, opting for traditional copper 10G means that as ISP services globally begin to exceed Gigabit speeds, the UniFi Express 7 gateway will not create a bottleneck, allowing your network to fully enjoy those higher speeds as they become available. This also means that this tiny box is future-proofing your internet service gateway for a considerable length of time as better connectivity options arrive. Nevertheless, I’m a little disappointed that you cannot set the 2.5G port as your WAN, thereby allowing you to dedicate the 10G connection as a wider LAN connection. This would have been beneficial when using it alongside a traditional 10G NAS system or a larger switch that would take greater advantage of 10G network speeds. Very few users in the next few years will have internet speeds exceeding 2.5G (regardless of whether you are a home or business user), so fixing the 10G connection as the only WAN port feels like overkill for many. CORRECTION! You CAN set the 2.5G as a WAN port, but you need to manually change the initial 10G WAN port to LAN or Disabled FIRST, then the option to select 2.5G as a WAN will appear!

Impressively, the device is powered by a standard USB-C PSU, which is included in the kit. It’s probably no surprise that this device is quite power-efficient, factoring in the ARM CPU alongside the system’s prioritization of Wi-Fi connectivity out of the box rather than LAN/physical WAN connections. At peak Wi-Fi bandwidth utilization, with an active 10G connection, UniFi reports that the device draws just 22 watts at peak usage. Realistically, the device will spend 90% of its time operating at a fraction of this power consumption. Another major difference between the UX7 and other UniFi network management devices released in the last 12 months is that this system does not feature any internal storage or expandable storage via an SD card or USB port.

This means that the system is unable to host popular UniFi add-on applications for surveillance, in-house communication hardware, or dedicated UniFi hardware appliances. These features can still be added via an expanded UniFi network client installation over time, which is why this device is so affordable compared to other solutions. It is designed around gradually expanding your hardware network. That said, it’s a real shame that this device does not include any baseline storage out of the box, as many users would have wanted to utilize it as the base for a convenient and easy-to-deploy UniFi Protect surveillance device. As mentioned earlier, the UX7 is quite a niche device, making it difficult to compare against an already well-provisioned router or business gateway device. The hardware design and connectivity of the UX7 are optimized for a small, compact UniFi gateway deployment, but it also includes provisions for future scalability with wireless access points (for mesh networking) and UniFi switches for expanded connectivity later.

In that vein, let’s now discuss the UniFi Controller software and how the Express 7 takes advantage of it today—while also promising greater expansion capabilities in the future.

UniFi Express 7 Review – Software and Services

IMPORTANT !!!- Currently the Software review of the Ux7 is in progress, but I have already reviewed the UDR7 device which is very similar indeed. So, whilst I complete the UCG-Fiber and UX7 review, I have included the software review of the other 2 devices below, as they are running near identical services and features (but with differences with regard to port/wifi features. I will be amending the below text very soon, but include it here to give a better understanding of what this UniFi controller software can do. Apologies for this in the meantime.

Realistically, no one should be spending inordinate amounts of time using the software that your router arrives with – that’s just a simple fact. Indeed, you want you router (or any network appliance) to just do it’s job! Therefore talking about just how good the UniFi network software is, and how the UniFi Dream Router 7 capitalized on it, is going get a mixed reaction depending on your own level of network knowledge and custom requirements. I will say straight away though that you will really, REALLY struggle to find a more capable and flexible router software at this price point. You will struggle to find ANY setting, config, adjustable parameter of control measure not included with the UX7. First off, there is the mobile application. As the UX7 hosts the UniFi network software, ALOT of the iOS and Android official UniFi applications are supported by the UX7.

Firs time setup of the router using the mobile application (you can use a desktop machine with your web browser if you prefer of course) is incredibly straight forward. The Router can be found via the local area network or Bluetooth within 2 minutes of it’s first power-on. One big misconception (I was guilt of this too a while back) was that you have to register a UI.com account online in order to use UniFi appliances. This is NOT true. You can set the device up without a UI account (and even WITHOUT an internet connection) and doing so just needs to you create a local administrator account. It is recommended to use a UI account of course, as it allowed for easier comms and access for your larger Unifi network, but it is by no means compulsory. You can also create a system backup (with your config data of users, settings, SSIDs, etc) and backup online if you choose – and then easier pull this backup if you wish during initialization easily.

Upon creating local credentials or resisting an online account, the router performs an initial internet performance test and then goes about setting up your router. Much like other recent UniFi releases, the system has a ‘gamer’ style installation screen that shows tips and guides on how to get the most out of your router – very rare in a router I will say.

The setup process takes around 2-3 minutes and after that, you have pretty much FULL control and access to the Router’s configuration from your mobile phone. You can definitely tell that UNiFi have put the hours in with regard to the UX of the mobile application. Routers (and switches for that matter) are NOT easy systems to try and simplify – let along ocndence in a compact mobile UI. However they really have excelled in the latest version of their software.

Management of individual devices on the network are all presented intuitively in the app, and alongside their position/priority/bandwidth/consumption being presented, you can also use the app to institute controls and rules for 1, some or all devices on the fly – with instant implementation. Again, it’s no the fact that you can ‘do’ this that I am impressed by, it is the ease and intuitive way it is presented in a mobile app.

The same applies to the physical connections and wireless connections on the UX7 itself, with full remote control with the app to bridge, negotiate, failover, vLAN, disable, etc any port easily – as well as create new SSIDs, assign channels and push client devices around on the router side in 3-4 clicks. All of this is performed responsively and easily in the app.

On the subject of client devices, let’s discuss that WiFi 7 support. WiFi 7 opens up ALOT of performance and general bandwidth advantages. WiFi routers and client devices have been around now for around 10-12 months, as well as the increase in availability globally of greater than Gigabit internet services. Most internet service providers have already a router with their services – but not many provide WiFi 7 routers with their services, even at greater than gigabit speeds. So, what is the advantage? For the quicker (ish) version, watch my video below.

Now, you might well not have any devices right now that are WiFi 7, but plan on upgrading to WiFi 7 at some point in the further over a PCIe upgrade card. Even if you are using a system that lacks a PCIe upgrade clot, you can get small m.2 upgrade cards for a WiFi 7 / 802.11be upgrade for as little as $15-20 here. Hell, you do not even need to open up your system, as you can now get WiFi 7 to USB adapter upgrades for as little as $25-30, which is exactly what used when testing the router with my Windows 11 laptop for the earlier testing of the UDR7.

The USB-to-WiFi 7 Adapter I used in my testing of the UDR7 was this one HERE on Aliexpress.

This USB to WiFi 7 adapter allowed for immediate 802.11be connectivity between my laptop and the UniFi Dream Router 7, over the now available 6Ghz band. Although there is more to WiFi 7 and this router than just that additional frequency. The UX7 SUPPORTS 2.4Ghz and 5ghz (just like all WiFi 6 and 6E routers), but crucially alongside the 6Ghz band allowing for more active concurrent connections, you are also able to take advantage of 320Mhz bandwidth (till now WiFi 6/6E only allowed for up to the 160Mhz connections). This means that you have a greater bandwidth per connection – though you can only have a finite amount of connections at 320Mhz at once. This is COMBINED with WiFi allowing for overlapping connections too and 1 device enjoying multiple connections at once.

This means that not only can you match the speed of a normal wired gigabit connection, but you can ABSOLUTELY SMASH IT! As you can see below, using this USB adapter on my regular windows laptop, connecting to the UniFi Dream Router 7 over the 6Hz band – I was able to hit 2.8Gb/s wireless connectivity!!! That is even faster than using one of the physical 2.5GbE connections on the UX7.

It’s worth remembering though that WiFi 7 is NOT perfect and although it presents a lot of benefits for bandwidth improvements, reduced latency and increased encryption options, support of the wider frequencies and abilities of a larger WiFi 7 populated network are still a little ‘early days’.

By that, I mean that although you can hit high performance with 320Mhz connections, the actual radio frequency opened up right now (depending on your region) is pretty slim. The UX7 DOES show you the full radio spectrum, separated dynamically with each 20/40/80/160/320Mhz block that is spread across 2.4/5/6Ghz – but ALOT of it is still unavailable to use in many regions.

These limitations are likely going to reduce over time and, therefore you have to look at a decent % of the WiFi capabilities of the UniFi Dream Router 7 as ‘future proofing’ – but just keep in mind that although you can deploy ALOT of wireless (and wired) devices in a UX7 managed environment, those peak 802.11be/WiFi 7 bandwidth improvements are going to be shared only by a few client devices – in reality the real benefits are going to be felt with the opening up of the 6Ghz frequency allowing for more devices to be spread over all three frequencies and bands at 80/160Mhz.

Anotehr note to keep in mind is that the 6Ghz band has a shorter area of effect than 5Ghz (which likewise has a shorter area than WiFi 5). So WiFi7 is at it’s best in closer proximity without walls – more as a cable alternative if you are in the same areas as your UniFi router. But when I connected to a 10GbE NAS (connected to the 10GbE port of my UCG-Fiber), I was able to hit 187MB/s write easily (though read performance was oddly inconsistent – possibly related to the NAS, still investigating – TBC) in CrystalDiskMark.

Likewise, similar testing with the WiFi 7 USB Adapter, through the UX7 and at the 10GbE connected NAS hit 260MB/s+ easily. Once again, I would have easily respected this if I had been connecting with the NAS using the 2.5GbE ports – but I am hugely impressed that I was able to hit this benchmark over a WiFi connection (thanks to that 2.8Gbps 6Ghz setup). Respect!

Additionally, it is very easy to monitor the position, WiFi coverage, Channel and performance of any device connected to the UX7 controller software. Also allowing you to create rules on the fly to automatically manage them later as/when devices arrive.

These same controls also extend all the way down to the ISP input of the UX7 AND IF YOU HAVE MULTIPLE uNIfI AP/Nodes in your setup, can control how/where bandwidth is allocated and the priority of devices/nodes that are unique to your own deployment.

The dashboard features a grouped UI and analytics overview that allows you to see the price traffic that is going into a physical LAN, grouped VLAN or just a single devices on the network – allowing you to see the sites/services/geo data in real time too!

And likewise as before, you can extent these analytics all the way to the root UX7 router to see EVERYTHING happening in realtime in your network and internet connectivity.

Blacklisting (and whitelisting occasionally) or certain websites is also easy to action manually when needed too – or you can import an existing database of ‘bad’ site lists directly into the UX7 to simplify the process.

Once rules, priorities, orders of services and limits have been created, you can then apply them to individual devices, networks, groups, vLANS, etc – even to a physical LAN port if needed. These rules are completely customizable and if 1 parameter is changed on the fly, it immediately actions across all selected devices.

It’s also worth highlighting that UniFi has its own enterprise user identity service (‘Identity Endpoint’) that you can apply to devices if you want to ensure that connected devices on the LAN or WAN are truly secure (client auth tools on each device) and this extends to the VPN and UniFi network client device access too.

I also should stress that although the UX7 seems like a very, VERY proprietary router – UniFi do NOT lock you into having to create an account with them or use only their services. You can set the system up for LOCAL ONLY management and control if you choose. Or even hybrid the two and create 1 secure ‘Identity Endpoint sys admin’, but others are ‘local’ only – nice balance tbh.

And new users (super user or billy basic!) can be created, modified and deleted at any time!

Control and configuration of the UX7 are very straight forward and there are pretty high end configuration options in the backend of the system to control both the local network setup, as well as WiFi connectivity out the box (or added later in the case of systems like the UCG Fiber via the U7/U7 Pro/U6).

And professional SI’s/Technicians can set the system to ‘truly open’ if they wish, and this can be securely controlled as needed. This allows for opening up frequencies in the case of a WiFi setup down the road and advanced settings related to antenna gain/adaption.

The system configuration and control are surprisingly extensive for a $279 router and puts it well, well into the realms of an enterprise-grade solution, despite its Prosumer/SMB price point.

Unsurprisingly, the UX7 has internet speed test tools (either using the native web browser GUI or the WiFiman application for Android/iOS).

But its goes further, with the ability to monitor the packet management in your network (covered earlier) to such as extent that you can even block the server calls to specific sites/vendors that are going through the UniFi manager and block them SPECIFICALLY. Eg, want to keep google services, but NOT YouTube (either for work/professional reasons, or because of your kids homework deadline?) – you can do that REALLY easily.

And you can apply these rules easily and analytics with ease via the topographical network monitoring window. So you can visually see the devices in the network, then apply the rules, in case a new device gets sneakily added to circumnavigate any limits/restricts in palce.

And if you see a sudden spike in internet use, you can (in seconds) isolate the device that is causing it AND see what it is – allowing yo to block/monitor as needed.

Equally, you can set some pretty extensive security provisions to pre-emptively kick in when an unknown device arrives on the scene, or if an existing device in the network begins to be suspicious.

The same goes for creating day 1/100 rules for port forwarding, traffic management and Firewall rules. All of this is HUGELY customizable and most pages in the UniFi GUI feature both ‘simple/easy’ views, as well as much more complex advanced views as needed at the top of each page.

The multiple LAN ports can also be scaled up/down as needed if your existing network is not quite ready for the full network connectivity of the UCG-Fiber too.

And thanks to the UX7 featuring multiple WAN ports, you can decide how you want to handle multiple ISP services into your home/business, to separate/combine/balance between them with ease across your connected devices.

Additionally, each WAN port can be adjusted to a ‘WAN’ or ‘LAN’ roles as needed – even disabled. So, whether it is as a failover internet connection, or that you want to free up that 10GbE port for use as a LAN – The choice is yours!

Also, as mentioned earlier, as the system supported internal storage via the slot, you can go ahead and run UniFi Protect surveillance software too – as well as as an additional switch to the available LAN ports, for cameras or add a camera to the POE port.

There are actually several different surveillance, communications, display or smart appliances in the UniFi portfolio that can be installed on the internet storage drive + also means you have more scope for that POE ready port.

It gets to a point (perhaps) that there are TOO many security and configuration options, and people looking for just a router to ‘just do it’s job’ will be somewhat overwhelmed. Most of the important settings are already set pretty well, but I never the less recommend first time buyers take the time to explore the configuration options present in order to better understand what they are buying here in terms of it’s abilities to protect your network and internet services.

This extends right the way down to the more advanced prevention and intrusion protection measures (Dark Web blocking too). Again, pretty advanced for many, but take the time to look through them if you purchase the UX7.

And if in doubt, you can use the UniFi Teleport VPN service to anonymize your site-to-site exchanges (again, very ‘first party’ and more about SD-WAN level stuff, but does form part of the purchase here).

Also, keep in mind that the UX7 has the option to create Airgaps in it’s wired network AND WiFi connectivity (if you want to add that) that allows you to create automated access times – especially useful for businesses who want to lock down access outside of the usual 9-5 operational hours.

If you want to use WiFi services, yo can create multiple SSIDs of varying degrees of access – and yes, all the controls on security, speed, antenna, frequency, vLAN, etc are all present here too.

When creating those VLANS, you can add specific physical ports, IDs, WiFi APs etc to that vLAN to segregate your network as securely as possible.

And from there you can adjust the vLAN configuration in terms of it’s smooth operation and security directly from the network management panel (as well as view all active vLANS on one page if needed to see how they interact/clash + show each device you have moved in/out of them easily.

And again, all packet management/monitoring are available within the vLAN if you need.

If this all sounds tremendously intimidating, there is a much, MUCH easier 1 panel view in the ‘Insights’ tab that just shows each current network branch and it’s connections/clients in a list format.

Not good enough? How about a global view that shows the data packet exchange in real time with regard to each region (i.e worried that your data is being harvested to an overseas location, this will show you which countries are currently connected with on your UCG-Fiber for upload/download (websites? server? It’s easy to check and find out here!).

Bottom line – the bulk of the UniFi Control Software here is available on the majority of UniFi Router, Express, Cloud Gateway and Dream Machine devices – but the EXTENT to which you can use it is heavily dependent on the device you buy. In the case of the UX7, you have a fantastic balance of Day 1 control sure, but you have an even better management and scalability on the system for when your ISP services double/triple, as well as the number of devices in your network expand.

UniFi Express 7 Review – Verdict and Conclusion

If the UniFi Express 7 had been released about six months ago, I think it would stand out considerably more than it does right now. However, sandwiching its launch between the Wi-Fi 7 UDR7 and the highly LAN-capable UCG-Fiber device somewhat muddles the launch of the UX7. The UX7 is a highly capable and highly expandable appliance that serves as an affordable, low-footprint way for home and business users to begin integrating UniFi into their network. Had this cloud gateway device arrived before the Router 7 or Fiber device, I think its integration would have been hugely appealing. However, given the small $49–$79 price difference between the Router/Fiber devices that UniFi launched at the same time, the UX7 does feel a bit underwhelming by comparison. That isn’t to say that the UX7 is a bad device! It really isn’t. UniFi has crammed a huge amount of capability and expandability into an exceedingly small frame, at just 11 cm²!

This is by far the smallest tri-band Wi-Fi 7 fully capable router-style device that I’ve ever seen, and it arrives at a lower price point than Wi-Fi 7 alternatives from Amazon or Google right now. It is also substantially easier to expand into mesh networks, thanks to the U7, U7 Pro, U6, and U6 Wall devices. Equally, the ease of adoption and integration of UniFi switches into the UX7 down the road means that you can granularly and much more affordably expand your network of UniFi devices over the years. This is a great deal easier than having to spend more money upfront on hardware that you may not even fully utilize in your network for a few years to come. Future-proofing and expandability are once again the key selling points here, but just keep in mind that there are alternatives to this product (including from UniFi themselves) available right now. It would be wise to spend a little more time considering whether those slightly more hardware-rich devices—at less than $100 more from UniFi—might be better suited to your needs.

Join Inner Circle

Want to follow specific category? Also Read...Ubiquiti Launches Three New UnUniFi Express 7 Review - SmallHow to Check If Your Hard DrivDirty Pipe Linux VulnerabilityWhich Kernel linux version doeDirty Pipe Linux VulnerabilityHow to play Music from SynologSelf maid Linux NAS vs SynologBuild My Own Open Source LinuxAS-T10G Asustor 10-Gigabit PCI Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

UniFi U7 Lite and U7 In-Wall WiFi7 Mesh APs Review

UniFi continues to flesh out its Wi-Fi 7 portfolio at the start of 2025, and, hot on the heels of the launch of their latest router and gateway devices, we see this brand start to roll out new Wi-Fi 7 access points intended to challenge both the price point and the hardware level of market alternatives for scaling out your Wi-Fi right now. UniFi has introduced the new compact Wi-Fi 7 U7 Lite access point, and at just $99, this is easily the best-value Wi-Fi 7 and 2.5GbE PoE-equipped mesh access point in the market—full stop! Alongside this, UniFi has upgraded the compact wall-deployed range with the new U7 In-Wall access point at $149, featuring three 2.5GbE ports, PoE power, and PoE pass-through network ports, as well as Wi-Fi 7 support. Needless to say, these are ideally designed for deployment in an existing UniFi network, but they are not strictly locked into that, and for some, they could be used for slow migration away from their existing wireless mesh setup via integration into third-party systems and eventually replacing it with a UniFi setup over time. But are these actually any good? How do they stack up against the current U7 Pro and U7 Pro Max Wi-Fi points? Ultimately, what have you lost in these due to this reduction in size that you may well be missing out on if you just go for the more established and available UniFi Wi-Fi 7 access points in their portfolio? Let’s discuss it in today’s review and testing.

UniFi U7 Lite & U7 In-Wall Review – Quick Conclusion

The UniFi U7 In-Wall and UniFi U7 Lite have clearly been designed for more modest and small-scale deployments, where the current range of UniFi Wi-Fi 7 APs may be overkill for some. You cannot fault the pricing strategy that UniFi has gone for here, especially when it comes to affordability. Notwithstanding the convenience of deploying PoE access points, that $99 price tag to scale up a Wi-Fi 7 AP that isn’t going to throttle the network bandwidth down to standard gigabit speeds is going to be hugely desirable. Equally, as UniFi has been upscaling a number of their PoE switches and gateway devices to feature 2.5GbE PoE, it is no coincidence that these Wi-Fi 7 PoE APs are rolling out at the same time. Power consumption seems pretty impressive, and whether you want to trust the UniFi Controller to manage your devices across individual bands and frequencies, or manually bind devices to specific frequencies, is totally at your disposal. This provides a neat balance between the novice user and the network enthusiast, allowing different levels of control based on user expertise. The only major downfall you can throw at either of these Wi-Fi AP devices is the lack of support for the 6 GHz frequency. It’s an important distinction for those who understand the benefits of Wi-Fi 7 and MLO, as the ability to access more available bandwidth is significantly reduced without the 6 GHz spectrum, resulting in less wireless sandbox to work with. That being said, these models are clearly designed to be as affordable as possible, and it could be argued that the less tech-savvy user might not even realize this feature is missing. However, if you are opting for either of these wireless AP devices or upgrading your Wi-Fi network to Wi-Fi 7 and truly want to maximize its potential, I would say spend the extra and get the U7 Pro or U7 Pro Max. For single-device Wi-Fi networks, the U7 Lite and U7 In-Wall are more than sufficient for these needs and are phenomenally great value.

BUILD QUALITY - 9/10

HARDWARE - 7/10

PERFORMANCE - 7/10

PRICE - 10/10

VALUE - 10/10

8.6

PROS

Affordable Pricing – The U7 Lite ($99) and U7 In-Wall ($149) provide excellent value for those looking to upgrade to Wi-Fi 7 without the premium cost.
2.5GbE PoE Support – Both APs support 2.5GbE uplink, ensuring faster network speeds without being throttled to 1GbE.
Multi-Link Operation (MLO) – Allows better stability and throughput by utilizing multiple bands simultaneously, even without 6 GHz.
Flexible Deployment – The U7 Lite is ideal for mesh expansions, while the U7 In-Wall adds extra wired connectivity with two additional 2.5GbE ports (one with PoE pass-through).
Easy Network Management – The UniFi Controller software allows both automated and manual control, catering to both novices and power users.
Efficient Power Consumption – These APs remain power-efficient, making them suitable for multiple deployments without excessive energy costs.

CONS

No 6 GHz Support – Without Wi-Fi 7\'s 6 GHz band, these models lack access to the full 320 MHz bandwidth, potentially leading to higher congestion in busy environments.
Limited for High-Density Networks – While they support 200+ clients, they lack the higher spatial streams of the U7 Pro and Pro Max, making them less suitable for very crowded networks.

UniFi U7 Lite & U7 in-Wall Review – Design and Hardware

The UniFi U7 Lite and U7 In-Wall are the latest additions to UniFi’s Wi-Fi 7-enabled access points, offering more budget-friendly alternatives to the U7 Pro and Pro Max. While these new models lack 6 GHz support, they retain many of the advantages of Wi-Fi 7, such as Multi-Link Operation (MLO) and higher bandwidth options for improved connectivity. Wi-Fi 7 introduces several key improvements over its predecessors, including Multi-Link Operation (MLO), wider bandwidth support, and higher efficiency for multiple connected devices. However, one of its most significant advantages comes from its ability to use the 6 GHz band, allowing for 320 MHz channel widths and significantly lower interference. While the U7 Pro and Pro Max fully leverage these benefits, the U7 Lite and In-Wall models are limited to the 2.4 GHz and 5 GHz bands, making them less capable in high-density environments but still powerful for general use.

Despite lacking 6 GHz capabilities, the U7 Lite and U7 In-Wall can still take advantage of MLO, allowing them to combine multiple frequency bands for improved stability and speed. This means that in practical use, they can still offer impressive throughput and reliable performance, even though they cannot reach the peak speeds of their Pro counterparts. For users who do not yet have many Wi-Fi 7-enabled devices, or who primarily need strong 2.4 GHz and 5 GHz coverage, these models offer a cost-effective solution that integrates well into UniFi’s ecosystem. That said, users looking for future-proofing and high-performance networking should still consider the U7 Pro or Pro Max, as they provide higher spatial streams, full 6 GHz access, and better support for high-density Wi-Fi environments. These factors make the Pro models a better fit for large offices, multi-device households, and advanced networking setups, while the U7 Lite and In-Wall models are more suited for smaller deployments and cost-conscious expansions of existing UniFi networks.

UniFi U7 Lite Hardware

The U7 Lite is designed as a compact ceiling or wall-mounted AP, delivering 115 square meters (1,250 square feet) of coverage with dual-band 2.4 GHz and 5 GHz support. It features a 2.5GbE PoE-powered connection and requires 13W at full power draw. Unlike the In-Wall model, it lacks additional Ethernet ports but still provides Wi-Fi 7 capabilities with up to 4.3 Gbps (BW240) and an 8 dBi antenna gain.

While compact, the U7 Lite is optimized for general wireless expansion in homes, offices, and mesh network deployments. It supports Multi-Link Operation (MLO), allowing it to operate across multiple frequencies for more stable connections. The plastic enclosure makes it lightweight, and its ceiling-mountable design ensures broad, unobstructed coverage.

Below is a hardware comparison table summarizing key specifications of the U7 Lite:

UniFi U7 In-Wall Hardware

The U7 In-Wall, priced at $149, is a versatile Wi-Fi 7 access point designed for wall-mounted deployment, making it a great fit for structured networking setups. It provides 115 square meters (1,250 square feet) of coverage and supports over 200 clients simultaneously, making it suitable for home and office environments. Like the U7 Lite, it supports dual-band Wi-Fi 7 (2.4 GHz and 5 GHz) but offers three 2.5GbE ports, including PoE pass-through on one of the outputs. This feature is particularly useful for powering additional devices like VoIP phones or cameras directly from the AP, reducing the need for extra power adapters.

The U7 In-Wall is designed for both wired and wireless expansion, making it stand out from simpler access points. The PoE+ uplink port (13W max) ensures efficient power delivery while enabling a seamless connection to an existing UniFi network. The metal wall mount design adds durability and stability, making it ideal for multi-room home setups or business deployments. Additionally, with 8 SSID support, it allows for network segmentation, a crucial feature for separating guest, IoT, or business traffic without requiring additional hardware.

Compared to the U7 Lite, the In-Wall model offers significantly greater wired networking flexibility. The addition of two extra Ethernet ports—one with PoE pass-through—makes it ideal for deployments that require a mix of wired and wireless devices. The Lite, in contrast, is more focused on providing general Wi-Fi coverage in open spaces without built-in wired networking expansion. This means that while the Lite is well-suited for broad Wi-Fi coverage, the In-Wall excels in scenarios where wired device connectivity is necessary.

Both models share several core benefits, including Wi-Fi 7 support, 2×2 MIMO on both 2.4 GHz and 5 GHz, and Multi-Link Operation (MLO). However, their lack of 6 GHz support and 320 MHz channel width capabilities means they cannot take full advantage of Wi-Fi 7’s highest potential speeds. Unlike the U7 Lite, which primarily targets budget-conscious users looking for general wireless coverage, the In-Wall is geared toward users who need wired connectivity and centralized networking within a single unit. In contrast, the U7 Pro and U7 Pro Max offer full 6 GHz support, unlocking higher bandwidth, lower interference, and greater efficiency in high-density environments. These premium models also include higher spatial streams and the ability to support more than 500 clients, making them a better fit for large offices, high-traffic environments, or future-proof setups. While the U7 Lite and In-Wall deliver strong performance at a lower price, users with demanding Wi-Fi 7 use cases may still find the U7 Pro series to be a superior long-term investment.

The U7 In-Wall is a versatile Wi-Fi 7 access point designed for wall-mounted deployment, making it a great fit for structured networking setups. It provides 115 square meters (1,250 square feet) of coverage and supports over 200 clients simultaneously, making it suitable for home and office environments. Like the U7 Lite, it supports dual-band Wi-Fi 7 (2.4 GHz and 5 GHz), but it enhances flexibility with three 2.5GbE ports, including PoE pass-through on one of the outputs. This feature is particularly useful for powering additional devices like VoIP phones or cameras directly from the AP. Unlike the U7 Lite, the U7 In-Wall is optimized for wired networking expansion while maintaining strong wireless performance. The PoE+ uplink port (13W max) allows for efficient power delivery, ensuring seamless integration into existing UniFi networks. The metal wall mount design provides durability and stability, making it ideal for permanent installations in commercial or multi-room home setups. The 8 SSID support allows for network segmentation, an essential feature for businesses and shared environments.

While the U7 Lite and U7 In-Wall share several similarities, such as dual-band Wi-Fi 7 support and 4.3 Gbps max speeds on 5 GHz, the In-Wall model stands out due to its extra Ethernet ports and PoE pass-through. These additions make it the better choice for users who need both wireless and wired expansion in their setup. The Lite, on the other hand, is geared more towards general Wi-Fi coverage in open areas, lacking the physical networking enhancements of the In-Wall model. In terms of shared benefits, both models lack 6 GHz support, meaning they do not leverage the full 320 MHz bandwidth available in Wi-Fi 7. However, both utilize Multi-Link Operation (MLO) to improve connectivity stability, ensuring strong performance even without access to 6 GHz channels. Additionally, their MIMO configurations (2×2 on both 2.4 GHz and 5 GHz) allow for consistent speeds across multiple devices, making them solid choices for Wi-Fi 7-enabled networks.

When compared to the U7 Pro and U7 Pro Max, the In-Wall and Lite models are more budget-friendly but also less feature-rich. The Pro and Pro Max benefit from 6 GHz support, higher spatial streams, and greater client capacity, making them ideal for high-density environments with demanding workloads. While the Lite and In-Wall are excellent for general networking, users needing future-proofing, greater bandwidth, and larger-scale deployment capabilities will still find the U7 Pro and Pro Max to be the superior choices. The U7 In-Wall, priced at $149, is a step up from the Lite version, integrating additional networking flexibility. Like the Lite model, it offers Wi-Fi 7 support on the 2.4 GHz and 5 GHz bands, but it distinguishes itself with two additional 2.5GbE LAN ports, one of which supports PoE pass-through. This makes it ideal for users needing wired connections for additional devices. The metal wall mount design ensures a stable and durable setup, making it a great option for expanding mesh networks. Let’s start the tests!

UniFi U7 Lite & U7 In-Wall Review – Performance Tests

To put these devices to the test, I conducted a series of benchmarks comparing them directly against the UniFi U7 Pro. The tests included file transfer speeds, internet speed tests, and long-range performance in different real-world conditions, helping illustrate where each access point excels and where certain compromises arise.

IMPORTANT – In every test, I let the client Windows laptop have it’s frequency and band be dictated by the USB WiFi 7 adapter AND the UniFi AP. I ran the ‘optimization’ scan on each UniFi AP once up to the first connection, but after that I trusted the Access Point to manage the connection and frequency position. I KNOW I could have manually adjusted/bonded bands and frequencies to each device for the tests (and most likely improve the results of each device), but this likely would not represent the average novice user experience, who would want to ‘trust’ the AP to handle their connection. So remember, that if you are connected to a UniFi U7/U7 Pro/U7 Pro Max/UY Lite/U7 In-Wall AP and you are getting low speeds, it might serve you well to log into your UniFi controller and set your bands/frequencies manually for priority devices.

• Router/Gateway: UniFi Cloud Gateway Fiber (UCG-Fiber)
• Internet Connection: 1Gbps Down / 100+ Mbps Up
• Testing Device: Windows 11 laptop with a Wi-Fi 7 USB adapter HERE 
• NAS for File Transfer: TerraMaster F4-424 Max (10GbE NAS) and a 10GB 4K .MP4 File
• Testing Distance: 10m (clear indoor), 5m (two walls in between), 20m & 30m (outdoor testing)

This setup aims to simulate typical deployment scenarios while factoring in both simple and obstructed line-of-sight conditions.

File Transfer Speed Test (10m, Clear Indoor)

• U7 Pro: 3 minutes 18 seconds (2.8 Gbps connection)
• U7 In-Wall: 4 minutes 31 seconds (1.4 Gbps connection)
• U7 Lite: 3 minutes 38 seconds (1.4 Gbps connection)

Analysis:

• The U7 Pro benefits from 6 GHz support and 320 MHz bandwidth, enabling significantly higher throughput, especially at close range with minimal interference.
• The U7 Lite comes surprisingly close to the Pro’s performance despite lacking 6 GHz, showing that its 5 GHz performance and MLO are still quite strong under optimal conditions.

• The U7 In-Wall is slower than the U7 Lite by almost a whole minute, yet it remains competitive for most home or small office needs.

Internet Speed Tests (Ookla Speed Test – 10m, Clear Indoor)

• U7 Pro: 689 Mbps Down / 79 Mbps Up
• U7 In-Wall: 491 Mbps Down / 82 Mbps Up
• U7 Lite: 479 Mbps Down / 88 Mbps Up

Analysis:

• The U7 Pro again comes out on top, showcasing the advantage of 6 GHz in an environment where the internet connection can exceed typical 2.4/5 GHz bandwidth.
• Both the U7 Lite and U7 In-Wall achieve around 500 Mbps, which is more than adequate for everyday use. Their slight gap compared to the Pro is expected given their lack of 6 GHz.

• Upload speeds are fairly close among all three, indicating stable performance on the 2.4/5 GHz bands even without the Pro’s extra frequency options.

File Transfer Test (5m, Two Walls in Between)

• U7 Pro: 13 minutes 31 seconds (fluctuated between 800 Mbps – 2.8 Gbps)
• U7 In-Wall: 5 minutes 1 second (consistent 1.2-1.4 Gbps)
• U7 Lite: 8 minutes 2 seconds (locked at 720 Mbps)

Analysis:

• The U7 Pro suffers here because it constantly attempts to leverage 6 GHz and MLO. Thick walls and interior interference can cause frequent band-switching, disrupting throughput consistency. I still want to investigate this, as it seems unusually slow – TBC
• The U7 In-Wall excels by settling quickly on a steady 5 GHz link, showing that fewer available bands can sometimes reduce overhead and yield consistent speeds.

• The U7 Lite offers moderate performance; it didn’t dynamically switch to multiple bands, so its stable but lower throughput (720 Mbps) resulted in a middling transfer time.

Long-Range Performance (20m & 30m, Outdoor)

• At 20m:

  • U7 Pro: Maintained a 6 GHz connection at 612 Mbps
  • U7 In-Wall: Used MLO (2.4 & 5 GHz) – 146 Mbps / 154 Mbps
  • U7 Lite: Maintained a 5 GHz connection at 680 Mbps

• At 30m:

  • U7 Pro: Dropped to 720 Mbps / 367 Mbps
  • U7 In-Wall: Maintained MLO connection at 146 Mbps / 172 Mbps
  • U7 Lite: Maintained a single 5 GHz connection at 136 Mbps / 324 Mbps

Analysis:

• U7 Pro’s 6 GHz signal offers high peak speeds, but 6 GHz can degrade faster over distance or through obstacles. Once it drops down, it’s still fast, yet its throughput can vary as it switches.
• U7 In-Wall uses MLO to combine 2.4 and 5 GHz, prioritizing reliability over sheer speed, which makes it ideal for consistent coverage in multi-floor homes or offices.

• U7 Lite sticks to 5 GHz, delivering a surprisingly solid signal at 20m and 30m. This approach prevents the frequent channel shifts seen on the Pro, resulting in smoother, if not top-tier, long-range performance.

Overall, these tests highlight the trade-offs each model makes:

• U7 Pro or U7 Pro Max: Best raw performance and peak speeds, but can suffer from complex band-hopping in tricky environments.
• U7 In-Wall: Balances wired flexibility with reliable 5 GHz coverage, ideal for consistent performance and versatile setups.
• U7 Lite: Compact and cost-effective, with speeds that rival the Pro at shorter distances but without the Pro’s complexity—well-suited for simpler mesh expansions.

Whether you prioritize peak throughput (U7 Pro), flexible wired connectivity (U7 In-Wall), or affordability and easy placement (U7 Lite), each model has distinct strengths to suit different user needs.

UniFi U7 Lite & U7 in Wall Review – Verdict and Conclusion

The UniFi U7 In-Wall and UniFi U7 Lite are well-positioned as affordable, small-scale Wi-Fi 7 solutions, offering dual-band 2.4 GHz and 5 GHz connectivity, 2.5GbE PoE support, and Multi-Link Operation (MLO) for improved stability. At $149 for the In-Wall and $99 for the Lite, they provide a cost-effective way to expand a UniFi network while avoiding the higher price points of Pro-tier APs. The U7 In-Wall stands out with its two additional 2.5GbE ports, including PoE pass-through, making it particularly useful for wired and wireless networking in a single unit, ideal for structured setups. Meanwhile, the U7 Lite serves as a simple and efficient mesh expansion option, making it a great fit for users looking for broad Wi-Fi coverage at a low cost.

However, the most significant limitation of these models is their lack of 6 GHz support, meaning they cannot leverage the full 320 MHz bandwidth that Wi-Fi 7 is capable of, potentially leading to higher congestion in busier environments. While MLO helps compensate, users in high-density areas may find that spending extra on the U7 Pro or U7 Pro Max is the smarter choice for future-proofing and superior performance. Still, for budget-conscious users or those expanding a smaller network, both the U7 In-Wall and U7 Lite are exceptional value, providing strong performance, power efficiency, and seamless UniFi integration without the premium price tag.

Pros of the U7 Lite / U7 In-Wall AP

Cons of the U7 Lite / U7 In-Wall AP

Affordable Pricing – The U7 Lite ($99) and U7 In-Wall ($149) provide excellent value for those looking to upgrade to Wi-Fi 7 without the premium cost. 2.5GbE PoE Support – Both APs support 2.5GbE uplink, ensuring faster network speeds without being throttled to 1GbE. Multi-Link Operation (MLO) – Allows better stability and throughput by utilizing multiple bands simultaneously, even without 6 GHz. Flexible Deployment – The U7 Lite is ideal for mesh expansions, while the U7 In-Wall adds extra wired connectivity with two additional 2.5GbE ports (one with PoE pass-through). Easy Network Management – The UniFi Controller software allows both automated and manual control, catering to both novices and power users. Efficient Power Consumption – These APs remain power-efficient, making them suitable for multiple deployments without excessive energy costs.

No 6 GHz Support – Without Wi-Fi 7’s 6 GHz band, these models lack access to the full 320 MHz bandwidth, potentially leading to higher congestion in busy environments. Limited for High-Density Networks – While they support 200+ clients, they lack the higher spatial streams of the U7 Pro and Pro Max, making them less suitable for very crowded networks.

Join Inner Circle

Want to follow specific category? Also Read...UniFi UNAS Pro - 6 MONTHS LATEUniFi USB4/TB4 to 10GbE AdapteWeek 11 Tech Roundup – UniFiUniFi U7 Pro XG and XGS 10GbE UniFi U7 Pro XG and XGS 10GbE Week 10 Tech Roundup – AOOSTUniFi U7 Lite and U7 In-Wall RUbiquiti Launches Three New UnUniFi Cloud Gateway Fiber (UCGUniFi Express 7 Review (UX7) Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

UniFi Dream Router 7 Review

When it comes to the hardware in your network environment, UniFi has always been one of those companies where you are either fully invested in practically every network appliance in its ecosystem or have nothing to do with it. A UniFi ecosystem is designed to allow you to easily and efficiently manage your entire network environment. In recent years, the brand has expanded beyond simple network appliances into a lot more IoT and client-edge tech found in homes and offices, further expanding this ecosystem. In the last year alone, we’ve seen them double down on surveillance, introduce network-attached storage, open up third-party hardware integration, and more. Today, I want to discuss their latest router, the UniFi Dream Router 7 (UDR 7), a new scaled-up 10G and WiFi 7 refresh of their existing WiFi 6 desktop-style router. Arriving at the mid-range price of around $279, it sits comfortably between affordable entry-level WiFi 7 routers from the likes of TP-Link while significantly undercutting pricing of bigger network routers from Amazon, Netgear, and Asus. Arriving with the UniFi Network and Router operating systems, as well as support for numerous UniFi software appliances, the UDR 7 marks a significant step up for comparatively domestic routers as we enter the seventh generation of wireless connectivity. Can this router be used in your network alongside non-UniFi equipment? And will this router serve you long-term as your client hardware scales up in line with modern tech innovation? Let’s find out.

UniFi Dream Router 7 Review – Quick Conclusion

As appealing as the UniFi router and network software that this system is bundled with are, the main praise I have to give the UDR 7 is that everyone is going to feel the benefits of this router in their network at this price point. The small compromises it has compared to the previous UDR system (such as fewer PoE ports) are immediately outweighed by its versatility, which would be hard to find at a better price elsewhere. The fact that all LAN ports are 2.5G and that the two WAN/LAN ports are 2.5G and 10G SFP+ respectively puts this router massively ahead of most competitors in the sub-$300 market. Equally, support for the UniFi Protect surveillance software and the included WD Purple SD card storage are nice extras that you don’t commonly find elsewhere—let alone the inclusion of a PoE 2.5G port. The router and network management software is, of course, quintessentially UniFi in its presentation. Striking a balance between usability and information is a tough challenge, and the UniFi software almost succeeds. It excels in its presentation and management via the mobile app, though the desktop UI could be a touch more intuitive. How could you make wireless and wired network management truly user-friendly? That said, the UDR 7 is a genuinely WiFi 7-ready router, offering 2×2 6GHz coverage and taking advantage of all the frequency and bandwidth benefits afforded to true WiFi 7 6GHz clients. Add a simple $20 USB WiFi 7 adapter to your system, and you can immediately enjoy base-level 2.8Gbps wireless connectivity, scaling this up substantially with the right WiFi 7 wireless NICs. Even if you’re not in love with the UniFi software platform or handing management of your services over to Ubiquiti’s remote services, you can still set up the device without a UI.com account. You do not need to deploy it with UniFi Network equipment, and VPN and encrypted protocol services can still be managed via popular third-party options if preferred.

Buying a router for your home or business instead of relying on the one supplied by your ISP can often feel like an unnecessary expense. However, considering the price point and the network advantages the UDR 7 provides, I believe this system is worth it. Some of its services might require additional polish over time, and greater network capabilities on this router will be realized as technology progresses, but I wholeheartedly recommend the UDR 7 for the majority of setups.

BUILD QUALITY - 10/10

HARDWARE - 9/10

PERFORMANCE - 9/10

PRICE - 8/10

VALUE - 9/10

9.0

PROS

WiFi 7 Support – Offers Genuine 6GHz connectivity with 320MHz channels, enabling faster speeds and lower latency.
Multi-Gig Networking – Includes three 2.5GbE LAN ports and a 10GbE SFP+ WAN/LAN port, making it highly future-proof.
Comprehensive UniFi Software – Provides robust network management features, including VLANs, QoS, IDS/IPS security, and VPN support.
Integrated UniFi Protect Support – Comes with a pre-installed 64GB WD Purple SD card, allowing local video storage for security cameras.
Flexible WAN/LAN Configurations – Supports dual WAN for failover or load balancing, or repurposing the 10GbE SFP+ port as LAN.
High Customization & Security – Offers advanced firewall controls, application-aware filtering, and in-depth traffic analytics.
User-Friendly Mobile App – Easy setup and management via the UniFi mobile app, with intuitive controls and real-time monitoring.
No UI.com Account Required – Can be set up locally without requiring an online UniFi account, providing more control over network privacy.

CONS

Limited PoE Support – Only includes one PoE-enabled 2.5GbE port, which may be a drawback for users looking to power multiple UniFi cameras or access points.
6GHz Band Availability Varies by Region – While WiFi 7 delivers significant improvements, the 6GHz spectrum and 320MHz channels may not be fully available in all areas, limiting real-world performance.
Not the Most Budget-Friendly Option – Although competitively priced for a WiFi 7 router, there are still more cost-effective alternatives on the market, especially for users who don’t need UniFi’s ecosystem.

UniFi Dream Router 7 Review – Design

The UniFi Dream Router 7 arrives in the same pretty and aesthetically eye-catching packaging as most UniFi products do. The fold-out cardboard packaging does a great job of protecting the device in transit while still looking absolutely great.

The unit is held tightly in custom multi-part card plus foam, and the power cable and small accessory kit are located in their own compartment at the bottom. I say accessory kit, but what there is is simply a two-pin power connector, a small manufacturer’s warranty booklet, and a pin. That’s really it. The router is designed with the software already preloaded in the system and is pretty much good to go as soon as you plug it into the power and connect your existing internet connection into an SFP RJ45 WAN port.

It is very different in design to pretty much every other router in the market, although a touch similar to that of the Apple or Amazon routers. UniFi has bolstered the existing design of the previous router/capsule style of devices and has simply scaled things up a little bit here with improved cooling and venting. It’s actually surprisingly compact for the amount of connectivity it has to offer.

The front of the system is also remarkably understated, though it does feature a small LCD panel that gives real-time information about active traffic utilization on the system. This is not exactly groundbreaking, but it does add to the aesthetic style and is arguably more than a lot of routers give you in the market anyway.

Flipping the device around shows us a bevy of network connections, and I’ll be honest—what there is to see is (brackets mostly closed brackets) absolutely fantastic for a router at this price, but more on that in a bit. The base of the system features a WPS button for easy connections just like you would find on the majority of other routers, as well as additional ventilation to keep things cool when the system’s in operation. I’m not really in love with the idea of the router not featuring much in the way of LEDs, and I do wonder about the temperatures of this system when you’re utilizing all four 2.5G connections and the 10G at once (not to mention all of those antennas running 6GHz connections). Certainly, I might have my reservations about deploying a router like this in a closed cupboard or non-ventilated location.

Instead of individual LEDs that denote connection, health, and internet health, the system instead uses a rather attractive ring color system at the top of the router that denotes the health and connectivity of an internet connection. Again, I think I would much rather have a little bit more front-mounted visualization of what’s going on with the individual connections rather than the streamlined LCD and internet LED indicator at the top, but I also know that, as more of a network systems addict, I do not represent most users. All in all, the design is exactly what you would expect from a UniFi product and does manage to cram a lot in while still maintaining a very unique and appealing aesthetic. However, there is quite a lot of hardware packed under the bonnet here; let’s discuss the ports and connectivity on this system.

UniFi Dream Router 7 Review – Ports and Connections

The previous UniFi Dream Machine Router stood out from a number of other WiFi 6 routers in the market thanks to its affordable price point and support for 2.5G WAN and PoE network connections. Now, the new UDR 7 scales things up in almost every way—but the one area it doesn’t improve upon may annoy some. For now, though, let’s discuss the default network connectivity.

There are five physical ports on the rear of the UniFi Dream Router 7. There are four copper 2.5G connections and a 10G SFP connection. Three of the 2.5G connections are dedicated LAN ports, each of which supports up to 279MB per second active connectivity.

There is then a further 2.5G optional WAN or LAN port, also in copper, that can have its utilization configured in the UniFi router software as needed. With an increase in greater-than-gigabit speeds around the world, alongside traditional ISP routers arriving with 2.5G ports for these higher-speed services, the fact that the default is 2.5G is going to be hugely appealing.

However, the UDR 7 also benefits from the inclusion of a 10G SFP connection, much like a number of premium-priced WiFi 7 routers, but at more than half the price. This is particularly useful as it too can be set as needed as a WAN port or a LAN port. That means the user can decide whether they want to directly pipe a high-speed fiber connection straight into the router to be shared across the other four 2.5G connections (covering the bulk of that 10G input), or leave this port as a LAN port for 10G NAS connectivity. That’s pretty useful and definitely advantageous in terms of scalability and long-term future-proofing as internet services in your home or business increase over time and the network capability of the appliances you buy likewise improves. This is a fantastic base-level network connection setup on the UDR 7. Once again, at $279, it makes it particularly appealing.

However, a little bit of good news/bad news is that, although the UDR 7 features a PoE port, it only features a single PoE copper output compared to the two PoE connections of the previous generation router. As the UDR 7 supports the installation of the UniFi Protect surveillance software (something we’ll touch on later), there are definitely going to be users a little disappointed that the ease of deploying PoE cameras directly into the router has been effectively halved here. This is especially disappointing now that UniFi Protect supports third-party PoE cameras too. Likewise, with an increase in PoE-ready accessories and devices from UniFi being released, some may find it a bitter pill to swallow that this new router has diminished this rather unique selling point of the previous generation UniFi router.

One interesting extra feature of the UniFi Dream Router 7 is that it features a microSD slot that arrives pre-populated with a 64GB card. This card is used in conjunction with the previously mentioned surveillance services and means that this router serves adequately as an alternative to a UniFi Dream Machine Pro or UNVR (albeit on a much smaller storage scale) for recording domestic surveillance cameras and keeping your footage. Another small note here: no one would have blamed UniFi if they’d included domestic SD cards that just happened to have the UniFi logo on them. Indeed, I don’t think anyone would have judged UniFi harshly if they hadn’t included an SD card at all! Nevertheless, this WiFi 7 router not only includes an SD card at no additional cost, but it is a WD Purple surveillance-designed SD card. Fair play.

In terms of WiFi connectivity, the router arrives with support for the 2.4GHz, 5GHz, and WiFi 7-specific 6GHz bands at 2×2. Equally, thanks to the opening of the 320MHz frequency blocks and multi-stream capabilities of WiFi 7, individually connected WiFi 7-ready appliances have the potential to not only exceed legacy physical gigabit LAN connections but achieve multiple times that speed.

For example, utilizing a simple budget $20 USB 6GHz WiFi 7 adapter from AliExpress, I was immediately able to create a direct 2.8Gbps WiFi connection between my Windows 11 laptop and the UniFi Dream Router 7. That is even greater than the physical 2.5Gbps connections on the router.

Let’s dig a little deeper into the wireless capabilities of this router and what it can and cannot do.

UniFi Dream Router 7 Review – Internal Hardware

The UniFi Dream Router 7 is built with a quad-core ARM Cortex-A53 processor clocked at 1.5GHz, paired with 3GB of DDR4 memory. This hardware configuration supports advanced networking functions such as multi-gigabit data throughput, VLAN segmentation, and application-aware security features. The DDR4 memory ensures improved performance and energy efficiency compared to older memory standards, which is crucial for delivering consistent and reliable network performance under load. The router’s CPU architecture is well-suited for multitasking, enabling it to handle multiple operations simultaneously without significant performance bottlenecks. In terms of real-world performance, the quad-core processor and 3GB of memory enable the Dream Router 7 to meet the demands of modern home and small-business networks.

The processor handles resource-intensive tasks like VPN connections, quality-of-service (QoS) adjustments, and advanced intrusion detection systems (IDS) efficiently. The ample memory capacity supports features such as traffic segmentation, advanced firewall configurations, and a high number of concurrent devices, especially over WiFi 7, which allows for faster speeds and improved device management compared to previous wireless standards. When compared to the UniFi Dream Router with WiFi 6, the newer model provides notable hardware enhancements. The older version includes a dual-core processor and 2GB of DDR4 memory, which are sufficient for many home networks but may struggle with more complex setups or environments with multiple high-bandwidth devices. The Dream Router 7’s additional CPU cores and larger memory capacity ensure better scalability and smoother performance when running advanced networking tasks or handling a larger number of connected devices. This makes the newer model more suitable for users with high-performance requirements or future-proofing in mind.

The improvements in the UniFi Dream Router 7 align with the growing needs of users who demand robust network performance, advanced features, and support for emerging technologies like WiFi 7. Its enhanced CPU and memory configuration allows for better multitasking, improved throughput, and reliable operation in demanding environments. These hardware upgrades ensure the router is capable of handling both current and future network demands efficiently.

UniFi Dream Router 7 Review – Software and Controls

Realistically, no one should be spending inordinate amounts of time using the software that your router arrives with – that’s just a simple fact. Indeed, you want you router (or any network appliance) to just do it’s job! Therefore talking about just how good the UniFi network software is, and how the UniFi Dream Router 7 capitalized on it, is going get a mixed reaction depending on your own level of network knowledge and custom requirements. I will say straight away though that you will really, REALLY struggle to find a more capable and flexible router software at this price point. You will struggle to find ANY setting, config, adjustable parameter of control measure not included with the UDR7. First off, there is the mobile application. As the UDR7 hosts the UniFi network software, ALOT of the iOS and Android official UniFi applications are supported by the UDR7.

Firs time setup of the router using the mobile application (you can use a desktop machine with your web browser if you prefer of course) is incredibly straight forward. The Router can be found via the local area network or Bluetooth within 2 minutes of it’s first power-on. One big misconception (I was guilt of this too a while back) was that you have to register a UI.com account online in order to use UniFi appliances. This is NOT true. You can set the device up without a UI account (and even WITHOUT an internet connection) and doing so just needs to you create a local administrator account. It is recommended to use a UI account of course, as it allowed for easier comms and access for your larger Unifi network, but it is by no means compulsory. You can also create a system backup (with your config data of users, settings, SSIDs, etc) and backup online if you choose – and then easier pull this backup if you wish during initialization easily.

Upon creating local credentials or resisting an online account, the router performs an initial internet performance test and then goes about setting up your router. Much like other recent UniFi releases, the system has a ‘gamer’ style installation screen that shows tips and guides on how to get the most out of your router – very rare in a router I will say.

The setup process takes around 2-3 minutes and after that, you have pretty much FULL control and access to the Router’s configuration from your mobile phone. You can definitely tell that UNiFi have put the hours in with regard to the UX of the mobile application. Routers (and switches for that matter) are NOT easy systems to try and simplify – let along ocndence in a compact mobile UI. However they really have excelled in the latest version of their software.

Management of individual devices on the network are all presented intuitively in the app, and alongside their position/priority/bandwidth/consumption being presented, you can also use the app to institute controls and rules for 1, some or all devices on the fly – with instant implementation. Again, it’s no the fact that you can ‘do’ this that I am impressed by, it is the ease and intuitive way it is presented in a mobile app.

The same applies to the physical connections and wireless connections on the UDR7 itself, with full remote control with the app to bridge, negotiate, failover, vLAN, disable, etc any port easily – as well as create new SSIDs, assign channels and push client devices around on the router side in 3-4 clicks. All of this is performed responsively and easily in the app.

On the subject of client devices, let’s discuss that WiFi 7 support. WiFi 7 opens up ALOT of performance and general bandwidth advantages. WiFi routers and client devices have been around now for around 10-12 months, as well as the increase in availability globally of greater than Gigabit internet services. Most internet service providers have already a router with their services – but not many provide WiFi 7 routers with their services, even at greater than gigabit speeds. So, what is the advantage? For the quicker (ish) version, watch my video below.

Now, you might well not have any devices right now that are WiFi 7, but plan on upgrading to WiFi 7 at some point in the further over a PCIe upgrade card. Even if you are using a system that lacks a PCIe upgrade clot, you can get small m.2 upgrade cards for a WiFi 7 / 802.11be upgrade for as little as $15-20 here. Hell, you do not even need to open up your system, as you can now get WiFi 7 to USB adapter upgrades for as little as $25-30, which is exactly what used when testing the router with my Windows 11 laptop for the earlier testing of the UDR7.

The USB-to-WiFi 7 Adapter I used in my testing of the UDR7 was this one HERE on Aliexpress.

This USB to WiFi 7 adapter allowed for immediate 802.11be connectivity between my laptop and the UniFi Dream Router 7, over the now available 6Ghz band. Although there is more to WiFi 7 and this router than just that additional frequency. tHE udr7 SUPPORTS 2.4Ghz and 5ghz (just like all WiFi 6 and 6E routers), but crucially alongside the 6Ghz band allowing for more active concurrent connections, you are also able to take advantage of 320Mhz bandwidth (till now WiFi 6/6E only allowed for up to the 160Mhz connections). This means that you have a greater bandwidth per connection – though you can only have a finite amount of connections at 320Mhz at once. This is COMBINED with WiFi allowing for overlapping connections too and 1 device enjoying multiple connections at once.

This means that not only can you match the speed of a normal wired gigabit connection, but you can ABSOLUTELY SMASH IT! As you can see below, using this USB adapter on my regular windows laptop, connecting to the UniFi Dream Router 7 over the 6Hz band – I was able to hit 2.8Gb/s wireless connectivity!!! That is even faster than using one of the physical 2.5GbE connections on the UDR7.

It’s worth remembering though that WiFi 7 is NOT perfect and although it presents a lot of benefits for bandwidth improvements, reduced latency and increased encryption options, support of the wider frequencies and abilities of a larger WiFi 7 populated network are still a little ‘early days’.

By that, I mean that although you can hit high performance with 320Mhz connections, the actual radio frequency opened up right now (depending on your region) is pretty slim. The UDR7 router DOES show you the full radio spectrum, separated dynamically with each 20/40/80/160/320Mhz block that is spread across 2.4/5/6Ghz – but ALOT of it is still unavailable to use in many regions.

These limitations are likely going to reduce over time and, therefore you have to look at a decent % of the WiFi capabilities of the UniFi Dream Router 7 as ‘future proofing’ – but just keep in mind that although you can deploy ALOT of wireless (and wired) devices in a UDR7 managed environment, those peak 802.11be/WiFi 7 bandwidth improvements are going to be shared only by a few client devices – in reality the real benefits are going to be felt with the opening up of the 6Ghz frequency allowing for more devices to be spread over all three frequencies and bands at 80/160Mhz.

Anotehr note to keep in mind is that the 6Ghz band has a shorter area of effect than 5Ghz (which likewise has a shorter area than WiFi 5). So WiFi7 is at it’s best in closer proximity without walls – more as a cable alternative if you are in the same areas as your UniFi router. But when I connected to a 10GbE NAS (connected to the 10GbE port of my UDR7), I was able to hit 187MB/s write easily (though read performance was oddly inconsistent – possibly related to the NAS, still investigating – TBC) in CrystalDiskMark.

Likewise, similar testing with the WiFi 7 USB Adapter, through the UDR7 and at the 10GbE connected NAS hit 260MB/s+ easily. Once again, I would have easily respected this if I had been connecting with the NAS using the 2.5GbE ports – but I am hugely impressed that I was able to hit this benchmark over a WiFi connection (thanks to that 2.8Gbps 6Ghz setup). Respect!

Additionally it is very easy to monitor the position, WiFi coverage, Channel and performance of any device connected to the UDR7 controller software. Also allowing you to create rules o the fly to automatically manage them later as/when devices arrive.

These same controls also extend all the way down to the ISP input of the UDR7 AND IF YOU HAVE MULTIPLE uNIfI AP/Nodses in your setup, can control how/where bandwidth is allocated and the priority of devices/nodes that are unique to your own deployment.

The dashboard features a grouped UI and analytics overview that allows you to see the price traffic that is going into a physical LAN, grouped VLAN or just a single devices on the network – allowing you to see the sites/services/geo data in real time too!

And likewise as before, you can extent these analytics all the way to the root UDR7 router to see EVERYTHING happening in realtime in your network and internet connectivity.

Blacklisting (and whitelisting occasionally) or certain websites is also easy to action manually when needed too – or you can import an existing database of ‘bad’ site lists directly into the UDR7 to simplify the process.

Once rules, priorities, orders of services and limits have been created, you can then apply them to individual devices, networks, groups, vLANS, etc – even to a physical LAN port if needed. These rules are completely customizable and if 1 parameter is changed on the fly, it immediately actions across all selected devices.

It’s also worth highlighting that UniFi has its own enterprise user identity service (‘Identity Endpoint’) that you can apply to devices if you want to ensure that connected devices on the LAN or WAN are truly secure (client auth tools on each device) and this extends to the VPN and UniFi network client device access too.

I also should stress that although the UDR7 seems like a very, VERY proprietary router – UniFi do NOT lock you into having to create an account with them or use only their services. You can set the system up for LOCAL ONLY management and control if you choose. Or even hybrid the two and create 1 secure ‘Identity Endpoint sys admin’, but others are ‘local’ only – nice balance tbh.

And new users (super user or billy basic!) can be created, modified and deleted at any time!

Control and configuration of the UDR7 are very straight forward and there are pretty high end configuration options in the backend of the system to control both the local network setup, as well as WiFi connectivity out the box (or added later in the case of systems like the UCG Fiber via the U7/U7 Pro/U6).

And professional SI’s/Technicians can set the system to ‘truly open’ if they wish, and this can be securely controlled as needed. This allows for opening up frequencies in the case of a WiFi setup down the road and advanced settings related to antenna gain/adaption.

The system configuration and control are surprisingly extensive for a $279 router and puts it well, well into the realms of an enterprise-grade solution, despite its Prosumer/SMB price point.

Unsurprisingly, the UDR7 has internet speed test tools (either using the native web browser GUI or the WiFiman application for Android/iOS).

But its goes further, with the ability to monitor the packet management in your network (covered earlier) to such as extent that you can even block the server calls to specific sites/vendors that are going through the UniFi manager and block them SPECIFICALLY. Eg, want to keep google services, but NOT YouTube (either for work/professional reasons, or because of your kids homework deadline?) – you can do that REALLY easily.

And you can apply these rules easily and analytics with ease via the topographical network monitoring window. So you can visually see the devices in the network, then apply the rules, in case a new device gets sneakily added to circumnavigate any limits/restricts in palce.

And if you see a sudden spike in internet use, you can (in seconds) isolate the device that is causing it AND see what it is – allowing yo to block/monitor as needed.

Equally, you can set some pretty extensive security provisions to pre-emptively kick in when an unknown device arrives on the scene, or if an existing device in the network begins to be suspicious.

The same goes for creating day 1/100 rules for port forwarding, traffic management and Firewall rules. All of this is HUGELY customizable and most pages in the UniFi GUI feature both ‘simple/easy’ views, as well as much more complex advanced views as needed at the top of each page.

The multiple LAN ports can also be scaled up/down as needed if your existing network is not quite ready for the full network connectivity of the UDR7 too.

And thanks to the UDR7 featuring multiple WAN ports, you can decide how you want to handle multiple ISP services into your home/business, to separate/combine/balance between them with ease across your connected devices.

Additionally, each WAN port can be adjusted to a ‘WAN’ or ‘LAN’ roles as needed – even disabled. So, whether it is as a failover internet connection, or that you want to free up that 10GbE port for use as a LAN – The choice is yours!

Also, as mentioned earlier, as the system supported internal storage via the slot, you can go ahead and run UniFi Protect surveillance software too – as well as as an additional switch to the available LAN ports, for cameras or add a camera to the POE port.

There are actually several different surveillance, communications, display or smart appliances in the UniFi portfolio that can be installed on the internet storage drive + also means you have more scope for that POE ready port.

It gets to a point (perhaps) that there are TOO many security and configuration options, and people looking for just a router to ‘just do it’s job’ will be somewhat overwhelmed. Most of the important settings are already set pretty well, but I never the less recommend first time buyers take the time to explore the configuration options present in order to better understand what they are buying here in terms of it’s abilities to protect your network and internet services.

This extends right the way down to the more advanced prevention and intrusion protection measures (Dark Web blocking too). Again, pretty advanced for many, but take the time to look through them if you purchase the UDR7.

And if in doubt, you can use the UniFi Teleport VPN service to anonymize your site-to-site exchanges (again, very ‘first party’ and more about SD-WAN level stuff, but does form part of the purchase here).

Also, keep in mind that the UDR7 has the option to create Airgaps in it’s wired network AND WiFi connectivity (if you want to add that) that allows you to create automated access times – especially useful for businesses who want to lock down access outside of the usual 9-5 operational hours.

If you want to use WiFi services, yo can create multiple SSIDs of varying degrees of access – and yes, all the controls on security, speed, antenna, frequency, vLAN, etc are all present here too.

When creating those VLANS, you can add specific physical ports, IDs, WiFi APs etc to that vLAN to segregate your network as securely as possible.

And from there you can adjust the vLAN configuration in terms of it’s smooth operation and security directly from the network management panel (as well as view all active vLANS on one page if needed to see how they interact/clash + show each device you have moved in/out of them easily.

And again, all packet management/monitoring are available within the vLAN if you need.

If this all sounds tremendously intimidating, there is a much, MUCH easier 1 panel view in the ‘Insights’ tab that just shows each current network branch and it’s connections/clients in a list format.

Not good enough? How about a global view that shows the data packet exchange in real time with regard to each region (i.e worried that your data is being harvested to an overseas location, this will show you which countries are currently connected with on your UDR7 for upload/download (websites? server? It’s easy to check and find out here!).

Bottom line – the bulk of the UniFi Control Software here is available on the majority of UniFi Router, Express, Cloud Gateway and Dream Machine devices – but the EXTENT to which you can use it is heavily dependent on the device you buy. In the case of the UDR7, you have a fantastic balance of Day 1 control sure, but you have an even better management and scalability on the system for when your ISP services double/triple, as well as the number of devices in your network expand.

UniFi Dream Router 7 Review – Conclusion and Verdict

The UniFi Dream Router 7 (UDR 7) is a well-rounded offering that brings WiFi 7 connectivity, multi-gig networking, and UniFi’s robust software ecosystem into a single package. Its combination of 2.5GbE LAN ports, a 10GbE SFP+ WAN/LAN port, and built-in UniFi network management tools make it a compelling option for users looking to future-proof their network without stepping into enterprise pricing. Features such as VLAN segmentation, VPN support, and content filtering provide a high level of customization for both home and small business users. However, the router’s design choices—such as the removal of an additional PoE port from its predecessor—may limit its appeal for those heavily invested in UniFi’s surveillance ecosystem.

While the UDR 7 shines in many areas, it is not without drawbacks. The router’s software, while feature-rich and highly configurable, may be overwhelming for users who simply want a plug-and-play experience. The reliance on UniFi’s ecosystem means that those who prefer third-party integrations may not fully benefit from its capabilities. Additionally, despite its strong WiFi 7 performance, the real-world benefits of the 6GHz band will depend on device compatibility and regulatory limitations, which are still evolving. The absence of more detailed LED indicators and the reliance on a single PoE port may also be seen as minor inconveniences for users who expected more from this mid-range offering.

Overall, the UniFi Dream Router 7 offers an excellent balance of performance, features, and pricing, making it a solid choice for users looking to upgrade to WiFi 7 and multi-gig networking. Its strong hardware, extensive software options, and future-proofing potential make it a standout option in the sub-$300 price range. However, its best value is realized within a UniFi-centric network, and those seeking broader third-party compatibility or simpler setups may need to weigh their options carefully.

Join Inner Circle

Want to follow specific category? Also Read...UniFi Dream Router 7 Review (U Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE