Beelink ME Pro NAS Review

The Beelink ME Pro is a 2-bay NAS-style mini PC that aims to deliver a full home or small office storage setup in a much smaller chassis than most traditional 2-bay systems. It is sold in 2 main versions, based on the Intel N95 or Intel N150, and both ship with pre-attached LPDDR5 memory and a bundled NVMe SSD as the system drive. Storage expansion is a mix of 2 SATA bays for 2.5-inch or 3.5-inch drives, plus 3 internal M.2 NVMe slots (1 running at PCIe 3.0 x2 and 2 running at PCIe 3.0 x1), and networking includes 5GbE plus 2.5GbE alongside WiFi 6 and Bluetooth 5.4. This review is based on several weeks of use and a set of structured tests covering temperatures over extended uptime, noise in idle and active states, power draw across different drive and workload combinations, and storage and network performance over both HDD and NVMe, with additional notes on the system’s internal layout and the practical limitations that come from its compact design.

Beelink ME Pro NAS Review – Quick Conclusion

The Beelink ME Pro is a very compact 2-bay NAS-style mini PC that combines 2 SATA bays with 3 M.2 NVMe slots and multi-gig connectivity, aiming to deliver a small footprint system without dropping features that are often reserved for larger enclosures. It is sold in N95 and N150 versions, both with pre-attached LPDDR5 memory (12GB or 16GB) and a bundled system SSD, and its internal layout uses 1 PCIe 3.0 x2 NVMe slot plus 2 PCIe 3.0 x1 slots, with 5GbE plus 2.5GbE Ethernet, WiFi 6, USB-C 10Gbps (with video output), HDMI 4K60, and a barrel-powered 120W PSU. In testing over extended uptime, external chassis temperatures stayed broadly in the mid-30C range with the rear around 38C, HDDs sat around 34C to 36C with modest 4TB drives installed, and NVMe temperatures rose sharply if the base thermal panel was removed, indicating the thermal pads and chassis contact are part of the cooling design and leaving no practical clearance for NVMe heatsinks. Noise in the tested setup remained in the mid-30 dBA range both at idle and under mixed access, power draw ranged from around 15W to 16W with no drives installed, 18W to 19W with only NVMe, about 22W to 23W with HDDs and NVMe idle, and peaked around 41W to 42W under a combined heavy workload. Performance was consistent with the hardware layout: HDD RAID1 throughput landed around 250MB/s to 267MB/s and will not saturate 5GbE, while NVMe could saturate the 5GbE link and internal testing showed about 1.5GB/s to 1.6GB/s reads and 1.1GB/s to 1.2GB/s writes on the PCIe 3.0 x2 slot, with the PCIe 3.0 x1 slots closer to roughly 830MB/s reads and 640MB/s to 670MB/s writes; media server use handled 4 simultaneous high bitrate 4K playback streams with CPU usage in the teens using Jellyfin. The main drawbacks are tied to the compact design choices: the RAM is not upgradeable, the chassis and storage fitting are very tight during installation, fan control outside BIOS was not straightforward in early testing, the NVMe slots are mixed speed by design, and the CPU options are closely spaced, meaning the upgrade decision is often about the bundled memory and SSD tier as much as the processor. Official messaging also says hot swapping is not supported, yet it worked during testing in a RAID1 scenario, suggesting a support-position limitation rather than a strict hardware block.

DESIGN - 9/10

HARDWARE - 8/10

PERFORMANCE - 8/10

PRICE - 8/10

VALUE - 8/10

8.2

PROS

Very compact footprint for a 2-bay NAS class system (166 x 121 x 112mm, metal chassis)
2x SATA bays (2.5-inch or 3.5-inch) plus 3x M.2 NVMe slots in the same enclosure
Multi-gig wired networking: 5GbE + 2.5GbE, plus WiFi 6 and Bluetooth 5.4
Strong idle efficiency in testing with drives installed and idle (about 22W to 23W)
Noise stayed in the mid-30 dBA range in the tested HDD and NVMe configuration
NVMe performance is sufficient to saturate the 5GbE link, with the PCIe 3.0 x2 slot clearly faster than the x1 slots
Chassis thermal design appears effective under typical always-on use, with external temps broadly in the mid-30C range
Practical service access features: magnetic rear cover, base access for M.2, stored tool in the base, reset and CLR CMOS available

CONS

RAM is fixed (no SO-DIMM), so memory cannot be upgraded after purchase
Very tight internal tolerances make drive and bracket insertion less forgiving during installation and changes
Mixed NVMe slot speeds (1x PCIe 3.0 x2 and 2x PCIe 3.0 x1) and no 10GbE option

Beelink ME Pro NAS Review – Design & Storage

The ME Pro is built around an all-metal unibody chassis that prioritizes footprint over easy internal spacing. In physical terms it sits noticeably smaller than many mainstream 2-bay enclosures, and in my comparisons it looked roughly 20% to 25% smaller next to typical 2-bay units from brands like Synology and TerraMaster. The front panel styling leans into a speaker-like look, and it has been compared to a Marshall speaker design, which is likely intentional given the mesh and badge layout. Functionally, that front area is not a speaker, and the design choice is mostly about appearance and airflow rather than adding any front-facing audio hardware.

From a storage perspective, the ME Pro is a hybrid layout rather than a traditional “2-bay only” NAS. It supports 2 SATA bays for 2.5-inch or 3.5-inch drives, and Beelink positions it as supporting up to 30TB per SATA bay, giving a stated 60TB HDD ceiling. Alongside that, it has 3 internal M.2 NVMe slots with a stated 4TB per slot limit, which Beelink frames as up to 12TB of SSD capacity. Taken together, that is the basis for the commonly quoted 72TB maximum figure, although most buyers will treat that as an upper boundary rather than a typical real-world configuration due to drive cost and heat considerations.

The SATA bays are accessed from the rear by removing a magnetic cooling mesh cover, then sliding out the drive bracket assembly. The trays are screw-mounted rather than tool-less, and the manual specifies different screw types depending on whether you are installing 2.5-inch or 3.5-inch drives. In practice, it is possible to physically place a drive in a tray without fully fastening it, but the design clearly expects proper screw mounting for stability and vibration control. The device also includes silicone plugs intended to reduce vibration and protect the drives, and the overall bay system is designed to sit very flush once reassembled.

One unusual design detail is that each HDD tray includes a thermal pad intended to draw heat away from the drive’s underside. That is not common on many 2-bay systems, and it suggests Beelink is trying to compensate for the compact enclosure by using direct contact points for heat transfer. The tradeoff is that this design pushes the product toward precision fitting, and it aligns with the wider theme of the ME Pro being tightly engineered rather than roomy.

If you typically choose NAS hardware where drive swaps are quick and frequent, this approach will feel more like a compact appliance that expects occasional changes, not a platform designed around constant drive rotation.

The compact chassis also affects how storage installation feels in the hands. Because clearances are tight, inserting the drive bracket and getting everything seated can feel less smooth than on larger 2-bay boxes, even though it looks clean once it is in place. This tightness is likely part of how Beelink is managing airflow paths and vibration control in such a small enclosure, but it still means you have less margin for error during installation. Overall, the storage design is best described as space-efficient and deliberate, but it asks for patience during assembly and it rewards users who install drives once and leave the configuration largely unchanged.

Beelink ME Pro NAS Review – Internal Hardware

The ME Pro is sold in 2 CPU variants, based on Intel’s N95 or N150, both 4-core and 4-thread chips with integrated graphics. In practical NAS terms, these CPUs sit in the low power mini PC category rather than the heavier desktop class, so the platform is designed around efficiency and compact integration rather than raw compute headroom. In your testing and general use, that design target showed up as stable day-to-day responsiveness for typical NAS tasks, plus enough iGPU capability for common media server workloads when paired with the right software stack.

Memory is integrated rather than socketed. The configurations pair the N95 with 12GB LPDDR5 4800MHz and the N150 with 16GB LPDDR5 4800MHz, and there is no user-accessible SO-DIMM slot to expand it later. In the context of a small NAS, this matters less for basic file serving and backups, but it becomes more relevant if the device is expected to run multiple containers, heavier indexing, or virtual machines. Because the memory is fixed at purchase, the CPU choice is also effectively tied to your long-term memory ceiling.

Internally, the platform is constrained by limited PCIe resources, which affects how the storage and networking are wired. In the review you noted the CPU platform has 9 lanes available, and the device uses a split approach across its internal components rather than giving every subsystem the same bandwidth. The NVMe area reflects this most clearly, with 1 slot operating at PCIe 3.0 x2 while the other slots operate at PCIe 3.0 x1, which makes slot choice part of performance planning for any workload that leans heavily on NVMe. This lane budgeting also helps explain why the system lands at 5GbE plus 2.5GbE rather than a single 10GbE port, since 10GbE would typically add pressure to an already tight allocation.

Controller choices are mixed rather than uniform, and you called that out as unusual. The 5GbE port uses a Realtek RTL8126 controller and the 2.5GbE port uses an Intel i226-V controller, which is not a common pairing in the same chassis. On the storage side, the SATA side is handled by an ASMedia ASM2116 controller, and in your notes you referenced it operating on a PCIe 3.0 x1 link, which is still sufficient for 2 SATA bays in most real-world use. These choices are relevant for OS compatibility and driver maturity, particularly if the unit is being used with NAS focused platforms rather than the included Windows 11 installation.

Cooling is one of the main internal design decisions that enables the smaller enclosure. Instead of a traditional rear fan placed at the drive backplane, the system uses a CPU fan working with a vapor chamber arrangement, and airflow is routed so that it also passes over other internal heat sources rather than treating the CPU as a separate cooling zone. In your thermal testing, you observed that the front panel area ran warmer than the rest of the chassis due to the WiFi hardware placement, and you also saw a noticeable rise in NVMe temperatures when the base thermal panel was removed, which supports the idea that the chassis panels and pads are intended to be part of the heat management system. Power is delivered via a barrel connector using a 120W external PSU, which provides headroom for spin-up and load, but it also means this is not a USB-C powered design.

Beelink ME Pro NAS Review – Ports and Connections

Up front, the ME Pro keeps things simple: a power button and a single front-mounted USB port for quick access. This suits the NAS-first intent, where most interaction is remote, but it also sets expectations for local use. If you plan to attach multiple peripherals directly to the unit, you are quickly pushed toward using a hub or relying on network-based management rather than treating it like a conventional mini PC with generous front I/O.

Most connectivity is placed at the rear and along the base section of the chassis, which also helps keep cables routed in one direction when the unit is placed on a desk or shelf. Wired networking is split across 2 Ethernet ports, a 5GbE port and a 2.5GbE port, and the unit also includes WiFi 6 plus Bluetooth 5.4. That mix allows both a standard single-cable setup and more flexible layouts such as separating traffic across the 2 wired links, or keeping WiFi available for temporary placement, troubleshooting, or scenarios where pulling Ethernet is not straightforward.

For general external connectivity, the ME Pro includes a USB-C port rated at 10Gbps for data and it supports video output, but it is not used for power input. Power is delivered through a barrel connector and the unit ships with a 120W external PSU, which provides comfortable headroom and removes any questions around USB-C PD negotiation. Alongside USB-C, it includes 1 USB 3.2 port rated at 10Gbps and 2 USB 2.0 ports at 480Mbps, which covers basic keyboard, mouse, UPS signalling, or low bandwidth accessories, but it is still a small selection compared with many mini PCs.

For local display and basic audio, there is 1 HDMI output rated up to 4K 60Hz and a 3.5mm audio jack. The manual also calls out a reset hole and a CLR CMOS function, which is useful context for users who intend to experiment with different operating systems, boot media, or BIOS settings, since recovery options are clearly exposed rather than being hidden inside the chassis. Overall, the port selection feels intentionally weighted toward networking and core connectivity, with enough display and USB support for setup and troubleshooting, but not a layout aimed at heavy local peripheral use.

Beelink ME Pro NAS Review – Noise, Heat, Power and Speed Tests

Testing was done over several weeks of general use and targeted measurements, with a focus on temperatures, noise, power draw, and storage and network throughput. The typical configuration used for the core measurements included 2 SATA HDDs and 3 installed NVMe drives, with the system left running for extended periods and accessed regularly throughout the day. In addition to network file transfers, I also checked internal storage performance directly over SSH to separate storage limits from network limits.

On thermals, external chassis temperatures after a 24-hour period of operation with regular hourly access sat around 34C to 35C across most sides. The base area was a little warmer at roughly 34C to 38C, and the rear section around the motherboard and vapor chamber area was around 38C. The installed HDDs sat around 34C to 36C in that same period, using 4TB IronWolf drives, so not high power enterprise class media. The front panel area peaked higher than the rest of the enclosure, which aligned with the internal placement of the WiFi hardware near the front of the chassis.

The NVMe area showed the clearest example of how much the chassis panels and pads matter. With the base thermal panel in place, the panel itself sat around 36C over the same extended uptime. When that panel was removed, temperatures on the NVMe drives rose noticeably, with the PCIe 3.0 x2 slot drive reaching around 45C to 46C and the PCIe 3.0 x1 slot drives sitting around 38C to 41C. The difference suggested that the base panel and thermal pad contact are doing meaningful work as part of the heat path, and it also reinforces that there is no practical clearance for NVMe heatsinks in this chassis.

Noise levels were measured in a modest drive configuration, and they stayed in the mid-30 dBA range in the test environment. With the HDDs idle and the system otherwise sitting in standby, noise came in around 36 dBA to 37 dBA. With both HDDs being accessed simultaneously and NVMe activity occurring, it sat around 35 dBA to 38 dBA. The system uses a compact fan approach tied to the CPU cooling path, and one limitation I ran into is that I did not find a straightforward way to control the fan outside the BIOS during early testing, including attempts via SSH, which reduces fine tuning options for users who want tighter acoustics control.

Power consumption was tested in several stages to isolate the impact of installed storage. With no HDDs or NVMe installed and the system powered on, it drew around 15W to 16W. With 3 NVMe installed and no HDDs, it rose to around 18W to 19W. With 2 HDDs and 3 NVMe installed but all media idle, it sat around 22W to 23W.

Under a heavy combined workload with HDD and NVMe activity plus the CPU at full utilization, power draw reached around 41W to 42W, which reflects a worst case state rather than typical idle or light service operation.

For throughput, 2 HDDs in a RAID1 style setup were able to deliver around 250 MB/s to 267 MB/s, which is consistent with what you would expect from 2-bay HDD performance and means the HDD side will not saturate a 5GbE link.

NVMe storage over the 5GbE connection was able to reach full saturation of the network link in testing, so the network became the limiting factor rather than the SSD. Internal NVMe testing over SSH showed the expected split between slots, with the PCIe 3.0 x2 slot delivering roughly 1.5 GB/s to 1.6 GB/s reads and 1.1 GB/s to 1.2 GB/s writes, while the PCIe 3.0 x1 slots delivered around 830 MB/s to 835 MB/s reads and roughly 640 MB/s to 670 MB/s writes with more variability.

On media server use, 4 simultaneous high bitrate 4K playback streams ran with CPU usage in the teens, using Jellyfin. One extra operational note from testing is that while official messaging indicates hot swapping is not supported, I was able to remove and replace a drive in a RAID1 environment without powering down and continue the rebuild process, which suggests the limitation may be a support stance rather than an absolute hardware block.

Beelink ME Pro NAS Review – Conclusion & Verdict

The ME Pro’s main practical strengths are the space-efficient chassis, the combination of 2 SATA bays with 3 internal NVMe slots, and a connectivity set that includes 5GbE plus 2.5GbE and WiFi 6. In measured testing it delivered controlled external temperatures under typical always-on use, mid-30 dBA noise levels in the tested configuration, and power draw that stayed in the low-20W range at idle with drives installed, rising into the low-40W range under a full combined workload. Storage performance matched the internal design limits: HDD throughput was solid but not enough to saturate 5GbE, while NVMe performance split clearly between the PCIe 3.0 x2 slot and the PCIe 3.0 x1 slots, with the faster NVMe slot capable of saturating the 5GbE link in network transfers.

The main limitations are tied to the same compact, integrated approach that makes it unusual. Memory is fixed at purchase with no SO-DIMM upgrade path, NVMe cooling relies on chassis contact and leaves no clearance for heatsinks, and the lane allocation results in mixed NVMe slot speeds rather than uniform bandwidth across all 3 slots. The launch CPU options also remain close enough that the decision is often as much about bundled memory and SSD tier as it is about a clear performance tier shift. For buyers who want a small, always-on NAS with mixed SATA and NVMe storage, multi-gig networking, and reasonable thermals, noise, and power characteristics, the ME Pro aligns with that goal, but it is less suitable for users who expect frequent hardware changes, want expandability in RAM, or prefer a more conventional 10GbE-first network design.

Join Inner Circle

Want to follow specific category? Also Read...Synology FS200T NAS RevealedUnifyDrive UP6 NAS Review - a UnifyDrive UP6 NAS ReviewBeelink ME Pro NAS ReviewUGREEN iDX6011 Pro AI NAS ReviUGREEN iDX6011 Pro AI NAS ReviUltimate DIY NAS Server Build DIY NAS Server Build Guide forMinisforum Reveal the New MiniMinisforum N5 MAX NAS Revealed Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

The Beelink ME Pro NAS – Should You Buy

After the surprising hit that was the Beelink ME Mini NAS in 2025, a lot of users were looking forward to seeing what the brand would do next in the NAS space. In January 2026, the brand responded with the launch of the Beelink ME Pro: an Intel N95/N150 powered system with DDR5 memory, 5GbE plus 2.5GbE connectivity, 2 SATA HDD bays, 3 M.2 NVMe bays, and one of the smallest physical footprints in this device class that I have seen. I have a full detailed review in progress on the ME Pro, but even after several days of use, several pros and cons have already emerged that may influence whether this is the right purchase for a homelab. While the review comes together, this article will outline the good, the bad, and the weird aspects of the Beelink ME Pro NAS.

Bonus Point: Really Nice Logistics Design

This is a minor point, but it is worth noting how the ME Pro arrives. The chassis box is unusually small for a 2-bay NAS, and at first glance it can look like the packaging contains little more than the unit itself. In practice, the accessory items are stored inside the drive bracket area in small internal boxes, which helps avoid loose parts moving around in transit and reduces wasted packaging volume.

The device also arrives with the M.2 thermal pads already positioned in place, so the initial storage installation process is more direct. It is not a major buying factor, but it is a practical packaging decision that avoids the excessive empty space and material waste that is common in this product category.

Reasons you Should Buy the Beelink ME Pro NAS

The ME Pro is positioned as a compact, high-connectivity 2-bay NAS that also provides NVMe expansion and local display capability, with hardware aimed at users who want more than basic file serving in a small footprint. It combines dual-port networking, integrated wireless connectivity, and multiple internal storage options in a chassis designed for straightforward access and cleaning, while also introducing a motherboard drawer concept that Beelink claims will support future platform upgrades. If those priorities match your setup goals, the ME Pro has several practical advantages that can justify its price and design choices.

#1 Man alive – this 2 Bay NAS is TINY!

The ME Pro’s most immediate differentiator is its physical footprint. The chassis measures 166 x 121 x 112mm and uses an all metal unibody design, which is notably smaller than most 2-bay NAS boxes that also include NVMe storage and dual network ports. In person it reads closer to a compact mini PC enclosure than a traditional NAS, and that difference matters if you are placing it on a crowded desk, a media shelf, or anywhere you are trying to keep cabling and hardware out of the way.

That compactness is not just cosmetic, it directly shapes how the hardware is arranged and how it feels to work with. Storage bays, the NVMe area, networking, and the cooling hardware are densely packed, so clearances are tight and the device is designed around precision fit rather than roomy access. The upside is that it is easy to place in small spaces without needing the usual NAS sized footprint. The tradeoff is that installations and maintenance are likely to feel more constrained than they would on a larger, more conventional 2-bay enclosure.

#2 Arrives with 5GbE and WiFi6, when everyone else is still on 2.5GbE

On networking, the ME Pro ships with 2 wired Ethernet ports and integrated wireless. The wired setup is a 5GbE Realtek RTL8126 port alongside a 2.5GbE Intel i226-V port, and the unit also includes WiFi 6 plus Bluetooth 5.4. For a compact 2-bay NAS, that is a broader mix of connectivity than the many systems that still top out at dual 2.5GbE, and it gives you more options for how the device fits into an existing home or small office network.

In practical terms, this provides flexibility rather than guaranteeing a specific performance outcome. A 5GbE port can be useful for faster transfers if you already have compatible switching or direct attach options, while the 2.5GbE port can serve as a secondary link for a different subnet, failover, or a separate device path depending on the OS and network configuration you choose. WiFi 6 is not a replacement for wired networking in a NAS role, but it can be relevant for temporary placement, initial setup, or use cases where running a cable is not straightforward, and the manual indicates the antenna is integrated into the front panel design rather than using an external antenna.

#3 Maintenance and Internal Access is a work of art!

The ME Pro is built around user access rather than treating the internals as a sealed appliance. The manual’s process is simple: remove the magnetic cooling mesh cover, unscrew and pull out the hard drive bracket, and use the bottom access panel to reach the M.2 slots. A screwdriver is stored in the base under a silicone pad, so the tool required for basic access is physically included with the device. The ports and recovery related features also acknowledge user servicing, with items like a reset hole and a CLR CMOS function shown in the manual.

In day to day handling, the layout is designed to slide out and reassemble in a specific order, and it generally supports the idea of quick cleaning and drive installation without full disassembly. At the same time, access relies on small screws and tight tolerances, so it is not a tool-less experience. In your first impressions, the mechanism for sliding the internal assembly out felt solid and precisely aligned, but you also noted that the included tool is very small and can be fiddly to use. The result is a design that prioritizes compact service access, but still expects careful handling during installation and maintenance.

#4 Great Base Memory Quantity at a time when RAM costs are BONKERS

From the start, the ME Pro is configured with either 12GB LPDDR5 4800MHz on the N95 models or 16GB LPDDR5 4800MHz on the N150 models, rather than shipping with a minimal memory pool that immediately pushes users toward an upgrade. In practical NAS use, that baseline capacity is relevant because it can influence how comfortably the system handles common add-ons such as containers, light virtualization, background indexing, and multiple concurrent services, depending on the operating system and workload. It also reduces the likelihood that memory becomes the first immediate bottleneck for typical home and small office setups.

The tradeoff is that this approach is linked to the way the memory is implemented. In your inspection of the unit, you noted there is no SO-DIMM slot and the RAM appears soldered to the board, which means users are effectively choosing their memory tier at purchase rather than treating it as a later upgrade (more on that in a bit). This makes the initial configuration choice more important, especially for buyers who already know they will run heavier applications or multiple VMs over time.

#5 Genuinely unique modularisation and upgradability in a pre-built solution, which I have ever seen

The ME Pro’s most unusual design claim is the swappable modular motherboard. Beelink markets the system as supporting interchangeable boards across Intel, AMD, and ARM options, using a drawer style layout intended to let the main compute board slide out rather than being permanently fixed inside the chassis. The product page frames this as a way to avoid replacing the entire enclosure when you want a different CPU platform, and instead treat the chassis, drive housing, and general structure as the long-term part of the purchase.

In practical terms, this concept will only matter if Beelink actually sells the alternative boards at sensible pricing and maintains availability over time, but the physical architecture appears to be built around the idea. Your first look showed a clear internal separation between the board assembly and the rest of the enclosure, and you also observed hints of planned scale-up hardware, such as layout markings that suggest different future storage or platform variants. For buyers who like the idea of extending a system’s usable life without a full rebuild, the ME Pro is one of the few pre-built NAS style devices currently trying to formalize that upgrade path rather than leaving it to a full case swap.

Reasons You Might Want to Skip the Beelink ME Pro NAS

The ME Pro’s compact design and connectivity focused feature set come with tradeoffs that will matter to some buyers more than others. Several of the core choices are linked together, meaning you get the small chassis, the storage density, and the modular drawer approach, but you also accept limits around upgrades, physical handling, and how the platform is configured from the factory. This is not a device where every part is meant to be user replaceable or easily swapped in the way a DIY small form factor build would be.

It is also worth treating the launch configuration and roadmap as part of the buying decision. The product is being introduced with very similar Intel CPU options and fixed memory tiers, while the company is already pointing toward future AMD and ARM variants and possible expanded layouts. For some buyers, that is a reason to wait until the wider range exists and the upgrade parts are actually available. For others, the current design constraints are enough to prefer a more conventional 2-bay NAS that is larger, simpler to work on, and has clearer long-term upgrade paths.

The RAM is FIXED (i.e cannot be upgraded or changed)!!!

The ME Pro uses LPDDR5 memory (12GB on the N95 models, 16GB on the N150 models), and based on the internal layout you inspected, there is no SO-DIMM slot for user upgrades. In other words, the memory appears to be soldered to the motherboard rather than installed as a replaceable module. That makes the initial purchase configuration more important than on many small NAS builds where memory can be upgraded later as needs change.

The practical impact shows up when your usage grows beyond basic file storage. If you plan to run multiple containers, heavier indexing tasks, or virtual machines, memory headroom can become a limiting factor long before CPU or network does, depending on the OS and services you deploy. With this platform, there is no simple path to increase RAM after purchase, so anyone unsure about future requirements may prefer a system with upgradeable memory, or may want to treat the 16GB model as the safer long-term option by default.

The design is so, so very tight!

The ME Pro’s small enclosure is achieved through very tight internal tolerances. That is visible in how the drive bracket, motherboard drawer area, and storage zones are packed together, and it influences the overall experience during installation and servicing. The system relies on screw mounting for drives rather than a click-in tray approach, and while the manual provides clear steps, the process assumes careful alignment rather than quick, tool-less handling. This level of precision fit is likely part of how Beelink is trying to control airflow and improve thermal transfer in a compact space, and it also aligns with their noise and vibration messaging around tightened mounting and silicone dampening.

In the first impressions, that tightness showed up most clearly when inserting and removing components. Slotting the hard drive bracket and drives could feel rough at times, with very little clearance to work with, and the internal assembly can require a firmer push to seat correctly. Even if the compact fit is helping with heat dissipation and vibration control, it remains a very tight build, and it is less forgiving if you are frequently swapping drives, testing different storage combinations, or repeatedly opening the chassis. The end result is a device that looks clean and flush when assembled, but can feel constrained during hands-on work compared with a larger enclosure with more physical margin.

Launching the N95 version and N150 version was an odd choice (i.e very similar processors)

At launch, the ME Pro is offered in N95 and N150 variants, and on paper these CPUs sit very close to each other. Both are 4-core, 4-thread Intel N-series parts with 6MB cache, and the headline frequency difference is modest: up to 3.4GHz on the N95 and up to 3.6GHz on the N150. For many NAS workloads that are constrained by storage or network throughput rather than CPU, this kind of gap may not translate into a clearly different experience, especially once real world thermal and power limits are applied.

This tight spacing makes the product stack less clear than it could be, because the pricing difference between the entry and higher tier configurations is not simply paying for a meaningfully different platform. In practice, buyers are also paying for the memory and SSD tier attached to each CPU option, and in your case the non-upgradeable memory makes that choice more permanent. If the goal is to segment the lineup, the N95 and N150 pairing may feel like a small step that leaves some users waiting for a more distinct higher performance option rather than choosing between two closely related CPUs. Given the noise that Beelink has made about this expanding range, that only further encourages some users who think these CPUs a little timid, to remain on the fence a bit longer….

There are other CPU/Architecture versions coming

As mentioned, Beelink is already signalling that the ME Pro chassis is intended to outlive the initial Intel configurations. The official product messaging highlights a swappable modular motherboard concept and explicitly references future boards beyond the current Intel N-series options, including AMD and ARM. In your first look, you also noted visible hints inside the unit that suggest the internal layout has been planned with other variants in mind, rather than being a one-off design limited to the launch hardware.

For buyers, this creates a timing question. If those alternative boards and models arrive soon, they may offer clearer performance separation, different feature priorities, or a better match for specific workloads. At the same time, the current purchase decision depends on what is available today, not what is promised, and the value of the modular approach only becomes real once the upgrade boards can actually be bought at reasonable pricing. Until the roadmap becomes a shipping product line, some users may prefer to wait, while others will simply evaluate the current N95 and N150 models on their own merits.

Mixed M.2 Speeds at PCIe 3.0 x2 and PCIe 3.0 x1? Was 10GbE and uniform lanes discussed instead?

The ME Pro’s 3 M.2 NVMe slots are not equal. Slot 1 is PCIe 3.0 x2, while slots 2 and 3 are PCIe 3.0 x1, and the manual specifically recommends using slot 1 for the system drive because it is the fastest slot. In practical terms, this creates a tiered NVMe layout where one drive has higher potential bandwidth than the other 2, which can influence how you plan cache, containers, VM storage, or scratch workloads. It also means peak NVMe performance depends heavily on which slot you choose, not just the SSD you buy.

That design choice raises an obvious tradeoff question: whether the platform would have been better served by a different allocation, such as keeping all 3 M.2 slots at PCIe 3.0 x1 in exchange for other connectivity, or prioritizing a different network tier such as 10GbE (though arguably, it might well have to sit at 3×1 and potentially be bottlenecked to 800-900MB/s, unless that lowered the m.2 to x2 bays). The ME Pro already includes 5GbE plus 2.5GbE, so the networking is not low end, but the mixed NVMe lane widths still make the storage side feel uneven by design. For a NAS focused build, the practical impact will depend on real testing: whether the internal topology causes contention under mixed loads, and whether the faster slot meaningfully benefits common tasks once network and SATA throughput are considered.

Conclusion & Verdict – Should You Buy the Beelink ME Pro NAS?

The Beelink ME Pro is a compact 2-bay NAS platform that combines SATA storage with 3 M.2 NVMe slots, dual wired networking, and integrated wireless in an enclosure that prioritizes density and internal access. It also introduces a modular motherboard drawer concept that, if supported with real upgrade boards over time, could change how long the chassis remains useful compared with typical pre-built NAS systems. As a hardware package, it is aimed at users who want high connectivity and mixed storage options without moving to a larger box.

At the same time, several of its main limitations are set at purchase and cannot be easily changed later. The memory appears fixed, the internal fit is very tight during drive and bracket handling, and the launch CPU options are closely spaced rather than clearly separated performance tiers. The NVMe layout is also mixed speed by design, which affects how you should plan drive placement and workloads. Whether these tradeoffs are acceptable depends largely on how much you value the enclosure size, the network ports, and the promised modular roadmap versus the more conventional upgrade flexibility of larger or more established NAS designs.

Join Inner Circle

Want to follow specific category? Also Read...Beelink ME Pro NAS Review - BIBeelink ME Pro NAS ReviewBeelink ME Pro NAS - Should YoBeelink ME Pro NAS RevealedBeelink ME Pro NAS RevealedBeelink NAS - Describe Your PeBeelink ME Mini Pro, ME S, ME Beelink Me Pro, S, X and MAX, Beelink Me Mini vs GMKTec G9 vBeelink Me Mini vs GMKTec G9 v Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

The Best PLEX, Emby and/or Jellyfin NAS Devices Released in 2025

Network media servers in 2025 range from tiny single drive boxes to fairly serious multi bay systems that can sit at the center of a home network. This article looks specifically at NAS hardware released in 2025 that can sensibly replace or supplement streaming services by running Plex, Jellyfin or Emby. The focus is on devices that arrive as complete appliances, with both hardware and a NAS style operating system included, so you can put a box on the network, install a media server app and start watching without building a PC or learning a full server stack.

To be included here, a NAS has to have gone on general sale in 2025, ship with its own OS rather than as a bareboard, and be able to run Plex Media Server, with Jellyfin and Emby support noted where it exists. In practical terms, that means hardware that can handle 4K and 1080p playback for multiple users and is realistically capable of at least 2 simultaneous 4K transcodes and 5 simultaneous 1080p transcodes, with a single exception where the overall package still makes sense for more limited workloads. RAID options, expansion, power use and noise are all taken into account, but the main filter is whether the device can function reliably as a modern media server on a typical home or small office network.

#1 Synology BeeStation Plus 8TB – $399 to $419

SPECS: Intel Celeron J4125 quad core 2.0 to 2.7 GHz – 4 GB DDR4 – 1 x 3.5″ 8 TB SATA bay (pre installed) – 1 x 1 GbE RJ45 / 1 x USB A 3.2 Gen 1 / 1 x USB C 3.2 Gen 1 – no M.2 SSD support.

BeeStation Plus is aimed at users who want a simple, appliance like Plex box rather than a configurable NAS. It runs Synology’s cut down BeeStation OS, has Plex Media Server support built in, and is set up entirely through a guided app and browser flow, so there is minimal configuration overhead. The hardware is sufficient for basic 4K and 1080p Plex use for a small number of clients, but the single non replaceable drive bay and lack of expansion, RAID options or M.2 slots mean it is best treated as a starter Plex unit for light libraries rather than a long term, scalable media server, and there is no official Jellyfin or Emby integration at this time.

What we said in our March ’25 Review HERE:

The Synology BeeStation marks a significant shift in Synology’s product line, targeting a new segment of users with its simplified yet functional design. This device stands out as an excellent middle ground between ease of use and a comprehensive private cloud system, providing secure and seamless access to stored data. While it is incredibly user-friendly and easy to set up, the lack of LAN access by default and its single-bay, 4TB-only configuration at launch might limit its appeal to more tech-savvy users or those seeking greater flexibility and expandability. The BeeStation’s unique selling point is its simplicity, making it a compelling choice for those new to NAS systems or for users who prioritize ease of use over extensive customization options. However, its simplicity also means that it lacks the extensive app support found in Synology’s DSM platform, potentially disappointing users accustomed to the richer application ecosystem offered by Synology’s more advanced models.

For users concerned about security, the BeeStation still upholds Synology’s reputation for secure data handling, with encrypted data transmission as a standard feature. However, experienced users who prefer a more hands-on approach to their NAS setup might find the BeeStation’s lack of advanced configuration options and its reliance on internet access for setup somewhat restrictive. In terms of market positioning, the BeeStation fills a gap left by other brands like WD and Seagate in offering ‘Easy NAS’ systems. Its competitive pricing, particularly considering the included 4TB of storage, makes it an attractive option for users seeking a private cloud solution without the recurring costs associated with third-party cloud services. Despite these potential drawbacks, the BeeStation is a solid entry-level NAS solution, especially for those seeking a personal cloud with minimal setup and maintenance. It may not be as feature-rich as Synology’s DSM-based NAS devices, but for its intended audience, the BeeStation provides a well-balanced combination of functionality, ease of use, and affordability. Synology’s move to cater to a broader, less technically inclined audience with the BeeStation demonstrates their understanding of market trends and user needs, offering a solution that balances simplicity with the reliability and quality Synology is known for.

In the end, the Synology BeeStation is an ideal choice for users seeking a straightforward, reliable, and cost-effective personal cloud solution. It represents Synology’s commitment to diversifying their product range, catering to the evolving needs of different user segments. While it may not suit everyone, especially those looking for advanced features and customization, it excels in its role as a user-friendly, secure, and affordable entry-level NAS device.

SOFTWARE - 7/10

HARDWARE - 8/10

PERFORMANCE - 7/10

PRICE - 10/10

VALUE - 10/10

8.4

PROS

User-friendly setup, ideal for beginners or those seeking a simple cloud solution.
Secure data handling with encrypted data transmission.
Comes with 4TB of storage included, offering good value.
Compact and lightweight design, enhancing portability.
Quiet operation, suitable for home or office environments.
Integrates seamlessly with popular cloud services like Google Drive and OneDrive.
Affordable pricing at $199, a cost-effective alternative to third-party cloud services.
Supports remote access, allowing data management from anywhere and across client devices/OS
Synologys reputation for quality and reliability is still clear on this smaller scale.
Several client tools (BeeFiles, BeePhotos and Desktop sync tool) for Windows, Mac, iOS and Android available for tailored access
System configuration backup option to USB/C2 (Often absent in budget cloud solutions)
AI Photo Recognition in BeePhotos for faces, Objects and geo data scraping + Advanced filter/search

CONS

Lacks the extensive app support and customization found in Synology\'s DSM platform.
Only available in a single-bay, 4TB configuration at launch, limiting expandability.
Single 5400RPM HDD running everything leads to slowdown more than you think!
LAN access is disabled by default, which may not suit all users.
Designed for a specific user base, may not meet the needs of more advanced users.

#2 Minisforum N5 NAS – $599 to $749

SPECS: AMD Ryzen 7 255 8 core 16 thread up to 4.9 GHz – up to 96 GB DDR5 via 2 SODIMM slots – 5 x 3.5″/2.5″ SATA bays – 1 x 10 GbE RJ45 / 1 x 5 GbE RJ45 / 2 x USB4 – 3 x M.2 2280 NVMe or U.2 SSD slots (PCIe 4.0).

The Minisforum N5 is a compact 5-bay NAS that targets users who want preconfigured hardware with some workstation derived design features. It uses an x86 CPU in the same general class as the Aoostar WTR Max, paired with an internal storage module of 64 GB for the system volume, and is typically sold in the 599 to 699 USD range, with the separate Pro variant occupying a higher bracket. The chassis integrates a removable drive base section for easier maintenance, and the platform includes multi-gig networking up to 10 GbE and 5 GbE, a PCIe expansion slot and USB4 connectivity for additional bandwidth or external devices. Minisforum ships the N5 with its own NAS operating system to provide an immediate out of box experience, but the software is still relatively young and many buyers elect to overwrite the included module with a more established NAS or server OS. Throughout 2025, availability has been intermittent, reflecting a level of demand from home lab users who want higher specification NAS hardware without building entirely from individual components.

What we said in our July ’25 Review HERE:

The Minisforum N5 Pro is an impressive and highly versatile NAS platform that successfully combines the core strengths of a storage appliance with the capabilities of a compact, workstation-class server, making it suitable for demanding and varied use cases. Its defining features include a 12-core Ryzen AI 9 HX PRO 370 CPU with 24 threads and onboard AI acceleration up to 50 TOPS, support for up to 96GB of ECC-capable DDR5 memory for data integrity, and a hybrid storage architecture offering up to 144TB total capacity through a mix of five SATA bays and three NVMe/U.2 slots. Additional highlights such as ZFS file system support with snapshots, inline compression, and self-healing, along with high-speed networking via dual 10GbE and 5GbE ports, and expansion through PCIe Gen 4 ×16 and OCuLink interfaces, position it well beyond the capabilities of typical consumer NAS systems. The compact, fully metal chassis is easy to service and efficiently cooled, enabling continuous operation even under sustained virtual machine, AI, or media workloads.

At the same time, the bundled MinisCloud OS, while feature-rich with AI photo indexing, Docker support, and mobile integration, remains a work in progress, lacking some enterprise-grade polish, robust localization, and more advanced tools expected in mature NAS ecosystems. Minor drawbacks such as the external PSU, the thermally challenged pre-installed OS SSD, and the higher cost of the Pro variant relative to the standard N5 are important to weigh, particularly for users who may not fully utilize the Pro’s ECC and AI-specific advantages. For advanced users, homelab builders, and technical teams who require high compute density, flexible storage, and full control over their software stack, the N5 Pro delivers workstation-level performance and configurability in NAS form—offering one of the most forward-thinking and adaptable solutions available today in this segment.

The is now available to buy: Minisforum N5 Pro (Check Amazon) – HERE Minisforum N5 Pro (Check AliExpress) – HERE Shop for NAS Hard Drives on Amazon – HERE Shop for SSDs for your N5 Pro on Amazon – HERE

BUILD QUALITY - 10/10

HARDWARE - 9/10

PERFORMANCE - 9/10

PRICE - 7/10

VALUE - 8/10

8.6

PROS

High-performance AMD Ryzen AI 9 HX PRO 370 CPU with 12 cores, 24 threads, and AI acceleration (50 TOPS NPU) is INCREDIBLE for a compact desktop purchase
Support for up to 96GB DDR5 memory with ECC, ensuring data integrity and stability in critical environments
ZFS-ready storage with numerous ZFS and TRADITIONAL RAID configurations, snapshots, and inline compression
Hybrid storage support: five 3.5\\\"/2.5\\\" SATA bays plus three NVMe/U.2 SSD slots, with up to 144TB total capacity
Versatile expansion options including PCIe Gen 4 ×16 slot (×4 electrical) and OCuLink port for GPUs or NVMe cages
Dual high-speed networking: 10GbE and 5GbE RJ45 ports with link aggregation support + (using the inclusive MinisCloud OS) the use of the USB4 ports for direct PC/Mac connection!
Fully metal, compact, and serviceable chassis with thoughtful cooling and accessible internal layout - makes maintenance, upgrades and troubleshooting a complete breeze!
Compatibility with third-party OSes (TrueNAS, Unraid, Linux) without voiding warranty, offering flexibility for advanced users

CONS

MinisCloud OS is functional but immature, with unfinished localisation and limited advanced enterprise features - lacks MFA, iSCSI, Security Scanner and More. Nails several key fundamentals, but still feels unfinished at this time.
Despite External PSU design (will already annoy some users), it generates a lot of additional heat and may not appeal to all users overall
Preinstalled 64GB OS SSD runs hot under sustained use and lacks dedicated cooling. Plus, losing one of the 3 m.2 slots to it will not please everyone (most brands manage to find a way to apply an eMMC into the board more directly, or use a USB bootloader option as a gateway for their OS
Premium $1000+ pricing may be hard to justify for users who don’t need ECC memory or AI capabilities compared to the standard N5 at $500+

#3 TerraMaster F4 SSD NAS – $320 to $399

SPECS: Intel N95 quad core up to 3.4 GHz – 8 GB DDR5 (expandable to 32 GB) – 4 x M.2 2280 NVMe SSD bays – 1 x 5 GbE RJ45 / 2 x USB A 3.2 Gen 2 / 1 x USB C 3.2 Gen 2 / HDMI 2.0b – 4 x M.2 NVMe PCIe 3.0 slots (2 x2 / 2 x1).

The F4 SSD is an all flash NAS designed for users who want a compact, relatively low power Plex or Jellyfin server without mechanical drives. Its Intel N95 CPU and integrated graphics are sufficient for multiple 1080p and a modest number of 4K transcodes, and the 5 GbE interface allows the box to make use of higher network throughput than 1 GbE units. TerraMaster’s TOS 6 system offers a one click Plex package and container support for Jellyfin and Emby, but the interface and ecosystem are less refined than those from the largest NAS brands, and performance is ultimately limited by the entry level CPU and PCIe layout when many concurrent streams or heavier background tasks are involved.

What we said in our Aug ’25 Review HERE:

The TerraMaster F4 SSD presents itself as a well-considered entry into the compact, all-flash NAS segment, balancing low noise, energy efficiency, and competitive performance at a sub-$400 price point. With its fanless NVMe-based design, Intel N95 quad-core processor, and DDR5 memory, it meets the essential needs of home and small office users looking for a reliable and responsive storage solution. The inclusion of TerraMaster’s increasingly capable TOS 6 operating system, featuring AI-driven photo management, centralized backup, and Docker/VM support, makes it more than just a network storage device—it becomes a lightweight but versatile data center for the home. Its TRAID support allows for mixed SSD deployments with easy expansion, which is particularly attractive to users upgrading gradually or working within budget constraints. The thoughtful internal layout and cooling also ensure performance remains consistent even under sustained load, without sacrificing the near-silent operation.

However, the F4 SSD is not without caveats. The use of a single 5GbE port, without redundancy or aggregation, may deter users requiring network failover or higher throughput for simultaneous operations. Additionally, although the PCIe lane allocation strategy maximizes the N95’s limited bandwidth, the asymmetry between Gen3 x2 and x1 slots could bottleneck RAID performance depending on how volumes are configured. When compared to the larger F8 SSD or DIY options with dual 10GbE or ECC support, the F4 SSD may feel limiting to power users or business environments with stricter reliability requirements. That said, for the vast majority of home users, content creators, and prosumers looking for an all-in-one, high-speed NAS that blends well into living spaces, the F4 SSD delivers a solid and accessible solution. Its price-to-performance ratio, combined with the simplicity of deployment and maturing software ecosystem, makes it a compelling option in the growing market of SSD NAS devices.

SOFTWARE - 7/10

HARDWARE - 8/10

PERFORMANCE - 7/10

PRICE - 9/10

VALUE - 9/10

8.0

PROS

Compact, toolless chassis with easy-access thumb screw and SSD installation
All-flash NVMe architecture with support for four M.2 2280 SSDs
5GbE network port enables high-speed local and remote transfers
TRAID and TRAID+ allow mixed-capacity SSDs and seamless storage expansion
TOS 6 OS includes Plex, Jellyfin, Docker, VM support, and AI photo indexing
Quiet operation (19 dB) and low power usage (32W under load)
Priced competitively at $399 for a turnkey SSD NAS

CONS

Single 5GbE port with no failover or link aggregation
Two of the four SSD slots are limited to PCIe Gen3 x1, creating potential RAID bottlenecks
Non-ECC DDR5 memory may not meet strict data integrity requirements

#4 ZimaBoard 2 Single Board Server – $239 to $349

SPECS: Intel N150 quad core up to 3.6 GHz – 8 or 16 GB LPDDR5x – 2 x SATA 3.0 6 Gb/s ports for 3.5″/2.5″ drives (external bays or enclosures required) – 2 x 2.5 GbE RJ45 / 2 x USB 3.1 Type A / 1 x Mini DisplayPort 1.4 – M.2 SSD support via PCIe 3.0 x4 add in card only.

ZimaBoard 2 functions as a small, fanless compute module that can be combined with any suitable SATA enclosure or loose drives to create a highly customised Plex or Jellyfin server. It ships with ZimaOS, which exposes a NAS style interface, app catalogue and container options, so the system is usable out of the box without manually installing a general purpose Linux distribution. Dual 2.5 GbE ports and Intel Quick Sync support give it enough capability for several 1080p and selected 4K transcodes, but the absence of internal bays or native M.2 slots means storage design is entirely external, and the device is better suited to users who do not mind assembling their own chassis or reusing existing cases and drive cages.

What we said in our April ’25 Review HERE:

The ZimaBoard 2 is a competent and thoughtfully assembled single-board server that builds meaningfully on IceWhale’s earlier efforts, especially the original ZimaBoard and the ZimaBlade. Its design clearly targets users who want more flexibility and performance than traditional ARM-based boards can offer, but who also value power efficiency, silence, and a small footprint. The use of an Intel N150 CPU, 8GB of LPDDR5x memory, dual 2.5GbE ports, and a PCIe 3.0 x4 slot makes it viable for a variety of home server roles—from basic NAS and smart home coordination to lightweight container hosting and local media streaming. Features like onboard SATA, USB 3.1, and a DisplayPort connection further add to its utility. However, there are hardware limitations that may affect long-term suitability for advanced deployments. The soldered RAM cannot be upgraded, and the internal eMMC storage, while useful for initial setup, is too slow for OS-level responsiveness in more demanding use cases. Passive cooling, while appreciated for silence, also imposes some thermal limitations depending on the deployment environment.

On the software side, ZimaOS offers a decent out-of-the-box experience that caters to users with minimal technical background. It handles core tasks like application deployment, file sharing, and system monitoring without requiring advanced configuration, and its Docker-based App Store simplifies access to popular tools. For more experienced users, the system supports third-party OS installation, which is likely how many will ultimately use the ZimaBoard 2. Still, as a bundled solution, ZimaOS has matured significantly and now presents itself as a lightweight, capable, and non-intrusive platform for those who prefer to get started immediately. In the broader context of DIY server hardware, ZimaBoard 2 occupies a middle ground: more powerful and modular than Raspberry Pi-class systems, yet more constrained than full x86 mini PCs or enthusiast-grade NAS hardware. For those who understand and accept these trade-offs, and are willing to plan around its limitations, the ZimaBoard 2 offers a reliable and flexible foundation for compact, energy-efficient computing at the edge.

BUILD QUALITY - 10/10

HARDWARE - 8/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 10/10

9.0

PROS

x86 Architecture – Compatible with a wide range of operating systems including ZimaOS, Unraid, TrueNAS SCALE, and Proxmox.
Dual 2.5GbE LAN Ports – Offers strong networking capabilities for multi-service workloads and gateway setups.
PCIe 3.0 x4 Slot – Enables high-speed expansion for 10GbE NICs, NVMe storage, or combo cards.
Fanless, Silent Operation – Completely passively cooled, ideal for home or quiet office environments.
Compact and Durable Build – Small footprint with an all-metal chassis that doubles as a heatsink.
ZimaOS Included – User-friendly OS with a Docker-based App Store and basic VM tools, ready out of the box.
Flexible Storage Options – Dual SATA ports plus USB 3.1 support for connecting SSDs, HDDs, or external drives.
Low Power Consumption – Efficient 6W CPU with ~10W idle and ~40W max under heavy load scenarios.

CONS

Non-Upgradable RAM – 8GB of soldered LPDDR5x limits long-term scalability for memory-intensive tasks.
Slow/Small Default Internal Storage – 32GB eMMC is convenient but underperforms for OS-level responsiveness or high I/O workloads.
Thermal Headroom is Limited – Passive cooling alone may not be sufficient in closed environments or under sustained load without added airflow.
Not Launching on Traditional Retail, but instead on Crowdfunding.

#5 UGREEN NASync DH4300 Plus – $365 to $390

SPECS: Rockchip RK3588 8 core ARM (4 x Cortex A76 + 4 x Cortex A55) up to around 2.4 GHz – 8 GB DDR5 – 4 x 3.5″/2.5″ SATA bays – 1 x 2.5 GbE RJ45 / HDMI 2.0b / 1 x front USB C 3.2 Gen 1 / 2 x USB A 3.2 Gen 1 – no internal M.2 SSD slots.

The NASync DH4300 Plus is a 4 bay ARM based NAS that targets users who want RAID 5 capable storage for Plex or Jellyfin along with general backup duties at a moderate price. UGREEN’s UGOS Pro operating system includes its own media apps, an app store and containerisation features, and community testing has confirmed that Plex can achieve multiple 1080p and several 4K streams, benefiting from the RK3588’s hardware video engines. There is only a single 2.5 GbE port and no M.2 cache or expansion options, so scaling is limited to the 4 SATA bays and external USB storage, but for users who prioritise RAID 5 resilience, low to mid range transcoding capacity and comparatively low power use, it fits the role of a budget multi user media and file server.

What we said in our August ’25 Review Here:

The UGREEN DH4300 Plus carves out a unique niche in the budget NAS landscape by delivering hardware typically reserved for higher-tier systems at a much lower price point. Its RK3588 processor, 8GB of RAM, and support for 2.5GbE networking place it well ahead of most similarly priced competitors in terms of raw specifications. Additionally, features such as HDMI output, 10Gbps USB ports, and local AI-powered photo indexing are rare to find in entry-level NAS systems. Despite its plastic-heavy internal design and lack of expansion options like PCIe or M.2, the device delivers stable performance for file sharing, media access, and low-intensity AI workloads. It is not suited for power users demanding virtual machines or advanced snapshot automation, but within its class, the DH4300 Plus presents an appealing balance between cost and capability.

That said, the software experience is still a work in progress. UGOS Pro covers the essentials and offers a visually accessible UI, but lacks the advanced features and ecosystem integration found in more mature platforms like Synology DSM or QNAP QTS. Docker and snapshot support add welcome flexibility, but the absence of native Jellyfin, iSCSI, and VM functionality limits its use in more complex environments. Still, for home users, media collectors, or small office setups looking for reliable backup, modest AI-enhanced photo sorting, and smooth 4K playback, the DH4300 Plus delivers value well beyond its price tag. While it won’t replace high-end NAS appliances, it serves as a capable, efficient, and quietly innovative option in a saturated entry-level NAS market.

SOFTWARE - 6/10

HARDWARE - 7/10

PERFORMANCE - 6/10

PRICE - 9/10

VALUE - 10/10

7.6

PROS

Powerful ARM CPU: Equipped with the RK3588 SoC, offering 8 cores, integrated GPU, and NPU for AI workloads.
Generous (but fixed!) Memory: 8GB LPDDR4X RAM, rare in budget NAS systems, supports multitasking and Docker use.
2.5GbE Network Port: Provides faster-than-Gigabit throughput for backups, media streaming, and multi-user access.
HDMI 2.1 Output: Rare on ARM powered turnkey NAS, and enables direct media playback or NAS control at up to 4K 60Hz, uncommon in value-tier NAS units.
USB 10Gbps Ports: Dual USB-A 10Gbps and one USB-C 5Gbps allow for high-speed backups or external storage expansion.
AI Photo Management: Built-in NPU supports facial recognition and scene detection for local, private media organization.
Low Power Consumption: Efficient under load (~30W) and idle (~5W without drives), suitable for 24/7 operation.

CONS

No PCIe or M.2 Expansion: Lacks future scalability for NVMe caching, 10GbE, or other upgrades.
Single LAN Port: Only one 2.5GbE port, with no failover or link aggregation support.
Limited Software Ecosystem: UGOS Pro lacks iSCSI, VM support, and native Jellyfin, trailing behind DSM/QTS in maturity.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

Want to follow specific category? Also Read... Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Best Cheap NAS of the Year

Cheap NAS hardware in 2025 sits in an awkward middle ground between full DIY servers and polished, premium turnkey appliances, but it is also where many first time buyers start when they want to get away from cloud storage and subscriptions without spending a large amount of money. This article focuses on systems that have been available for under $249, arrive pre built with CPU and memory, and come either with their own NAS style operating system or with enough onboard storage to install one easily. The aim is to show what you realistically get at this price in terms of bays, network speed, scale and software, and where each device draws the line on features, expansion and flexibility so you can decide whether a low cost 2 bay box, an all M.2 cube or a bare board server is the better fit for your first step into local storage.

#1 UGREEN NASync DH2300 – $178 to $209

SPECS: Rockchip RK3576 8 core ARM up to 2.2 GHz – 4 GB LPDDR4X – 2 x 3.5″/2.5″ SATA bays (up to 60 TB total) – 1 x 1 GbE RJ45 – no internal M.2 SSD slots, 32 GB eMMC OS storage.

The UGREEN NASync DH2300 is aimed at users who want the cheapest possible entry to a proper NAS without losing basic RAID and a guided setup experience. Two SATA bays and support for up to 60 TB in RAID 0, RAID 1, JBOD or Basic give enough room for a modest media library, photo archive and PC backups, while UGOS Pro adds mobile apps, 4K HDMI playback, simple remote access and basic snapshot and multi user features in a consumer friendly interface. Power draw is low, thanks to the 8 core ARM SoC and 1 GbE networking, which also keeps noise and heat down compared with larger multi bay units. The key limitation at this price is that you are locked to 2 drive bays, a single 1 GbE port and no internal SSD caching or containers on this model, so long term scale and heavy app use are constrained. Overall it suits buyers who want a cheap, mostly turnkey alternative to cloud storage and USB drives, rather than a platform for heavier virtualization or high speed workloads.

What we said in our October 2025 Review HERE:

The UGREEN DH2300 represents a carefully positioned step in the company’s ongoing effort to make private storage approachable for non-technical users. Its hardware configuration, led by the Rockchip RK3576 processor and 4GB of fixed memory, provides solid baseline performance for a two-bay ARM-powered NAS at this price point. Although its single 1GbE network port may limit throughput for larger file transfers, the system compensates with a highly efficient power profile, quiet operation, and full support for common RAID configurations. The inclusion of a dedicated 32GB eMMC system drive, HDMI 4K60 output, and an NPU capable of AI-based photo indexing places it above most similarly priced entry-level alternatives from QNAP and Synology. However, certain aspects of UGREEN’s marketing—particularly the way the dual quad-core CPU clusters are presented as a single 8-core design—could be clearer. Likewise, the absence of upgradeable memory or faster networking options limits its long-term scalability for users seeking to expand their NAS environment beyond basic media and backup tasks.

From a broader standpoint, the DH2300’s strongest appeal lies in its simplicity and low operational overhead. UGOS Pro, though still developing in maturity, has evolved into a competent, user-friendly platform offering the key features needed for home data management, multimedia access, and scheduled backups. The OS’s stability, combined with efficient hardware and lightweight design, makes this NAS a practical alternative to annual cloud subscriptions for users who simply want local control over their data. It is not a system aimed at enthusiasts or professionals demanding virtual machines, multi-gig networking, or broad third-party OS support, but rather those seeking a self-contained, reliable, and low-maintenance device. Within that niche, the DH2300 delivers strong value and performs consistently well for the intended demographic—serving as an accessible first step into local storage ownership.

Buy the UGREEN DH300 on Amazon @209	Buy the UGREEN DH2300 on UGREEN.COM	Buy the UGREEN DH2300 on B&H
	STORE

SOFTWARE - 7/10

HARDWARE - 8/10

PERFORMANCE - 7/10

PRICE - 10/10

VALUE - 9/10

8.2

PROS

Efficient Rockchip RK3576 processor (dual quad-core ARM design) provides strong performance for a low-power NAS.
Integrated 6 TOPS NPU enables local AI functions such as face, text, and object recognition without cloud reliance.
UGOS Pro offers an intuitive, user-friendly interface with features like RAID management, snapshots, Docker, and backups.
Low noise output (31–45 dBA) and excellent power efficiency (9–13W typical use) suit 24/7 home operation.
Dedicated 32GB eMMC system drive keeps the OS separate from data volumes for better reliability.
HDMI 2.0 4K60 output allows direct media playback and display management.
Competitive pricing around $200 makes it a strong entry-level NAS alternative to subscription cloud storage.

CONS

Single 1GbE LAN port limits transfer speeds and network scalability.
Fixed 4GB memory restricts heavy multitasking or Docker use.
Spending just $100-150 more gets you much, much more capable x86 powered systems

#2 UniFi UNAS 2 – $199

SPECS: Quad core ARM Cortex A55 1.7 GHz – 4 GB RAM – 2 x 3.5″/2.5″ SATA bays – 1 x 2.5 GbE RJ45 with PoE++ – no internal M.2 SSD slots, 1 x USB C 5 Gb/s expansion.

UniFi UNAS 2 targets users already invested in the UniFi ecosystem who want basic network storage and UniFi Drive integration at a low buy in price. Two SATA bays are enough for a mirrored pair of HDDs or SSDs for small site backups, UniFi Protect recordings or general file storage, and the 2.5 GbE plus PoE++ design keeps cabling simple by combining power and data on a single link to an existing UniFi switch. UniFi OS and UniFi Drive provide a simplified management layer for object storage, simple file shares and cloud synced folders, with a small color LCM display giving at a glance system status without needing to log in. The main limitation at this price is that UniFi’s NAS software is still relatively immature, with no native support for third party media servers or advanced NAS apps and no SSD cache tier, so it is best treated as a small, integrated storage node rather than a full featured general purpose NAS. For users who want a cheap box that drops straight into a UniFi rack and handles basic storage quietly and efficiently, it fits that role.

What we said in our September 2025 Review HERE:

The UniFi UNAS 2 is presented as a compact and affordable two-bay NAS designed for straightforward storage and backup tasks, particularly within environments already using UniFi networking hardware. Its PoE++ design is distinctive, allowing both power and connectivity to be delivered over a single cable, simplifying installation where compatible PoE switches are available. This approach aligns with UniFi’s strategy of reducing external hardware requirements, though it also means that a failed port or damaged cable will disable both power and network access simultaneously. For non-UniFi users, the reliance on PoE++ creates an additional barrier, as adoption requires either compatible infrastructure or the included 60W injector. The shared dual-drive tray, lack of hot-swap support, and absence of expansion options further reinforce the system’s role as a fixed-capacity solution, best suited to smaller or secondary deployments. With a maximum drive budget of 52W and overall consumption limited to 60W, the device is power-efficient, but its architecture prioritises simplicity over flexibility.

On the software side, the UNAS 2 provides a user-friendly interface with access to snapshots, RAID configuration, system backups, and integration into the UniFi identity ecosystem. However, the limited hardware constrains the range of features available, and certain tools seen in UniFi’s larger NAS models are absent, such as encrypted volumes or extended network protocol support. Performance testing showed sequential read speeds up to 260 MB/s and write speeds around 160–180 MB/s, which make full use of the 2.5 GbE interface but leave little headroom for more demanding tasks. Thermals during extended use regularly pushed the CPU into the high 70s Celsius, and although fan management can be adjusted, sustained workloads highlight the limits of the system’s cooling design. The software’s omission of iSCSI and advanced backup filters also narrows its role, making it less competitive against established vendors in professional or virtualisation scenarios.

Ultimately, the UNAS 2 is most appropriately positioned as an edge or secondary NAS, providing basic networked storage for existing UniFi users who value plug-and-play deployment and ecosystem consistency, but it is not equipped to serve as a primary system in larger or more demanding environments (VMs, Containers, etc). A great and unique NAS that will nbe at it’s most appealing if you are already invested in the UniFi ecosystem, or have a NAS already that needs a network backup.

BUILD QUALITY - 9/10

HARDWARE - 7/10

PERFORMANCE - 7/10

PRICE - 10/10

VALUE - 9/10

8.4

PROS

Benefits from almost a year of development of the UNAS Pro by UniFi, resulting in a much more complete solution in both hardware and software
Exceptionally appealing price point
Extremely low impact (power use, noise level, physical scale all great)
Introduction of USB C 5Gb/s Connectivity is very welcome
Supports complete network/local access if preferred, as well as full remote connectivity with the UI.com account and site manager services
Wide Hard Drives and SATA SSD Support (UniFi branded drives and those from 3rd parties such as Seagate Ironwolf, WD Red and Toshiba N300)
Comprehensive network storage software in UniFi NAS OS and Drive.
Latest OS updates have included fan control, flexible RAID configurations, encrypted drive creation, customizable snapshots, more backup client choices/targets
\'Single Pane of Glass\' management and monitoring screen is very well presented!
One of the fastest to deploy turnkey NAS solutions I have ever personally used!

CONS

Single network port, though not a dealbreaker (as this is still just 2x SATA throughput), is not great in terms of a network failover or in deployment of SATA SSDs
Choice of PoE deployment unusual and limits some deployments
USB C connectivity does not support network adapters, NAS expansions or 3rd party UPS devices
Very modest base hardware, but understandable relative to the price
HDD injection is very unique, but it prevents hot swapping
Still a lack of client applications native to the NAS services for Windows, Mac, Android and Linux

#3 Beelink ME Mini – $209 to $279

SPECS: Intel Processor N150 quad core up to 3.6 GHz – 12 GB or 16 GB LPDDR5 – 0 x SATA bays / 6 x M.2 2280 NVMe slots (5 x PCIe 3.0 x1, 1 x PCIe 3.0 x2, up to 24 TB) – 2 x 2.5 GbE RJ45 – 64 GB eMMC plus up to 2 TB NVMe preinstalled.

The Beelink ME Mini trades spinning disks for six M.2 slots in a 99 mm cube, making it one of the most storage dense budget options for users who already have or plan to buy multiple NVMe SSDs. At this price bracket it offers far more raw flash capacity potential than traditional 2 bay HDD NAS units, and the dual 2.5 GbE ports allow the box to push enough throughput for small media servers, backup targets and home lab services once an appropriate OS such as TrueNAS, Proxmox, Linux or a lightweight NAS distribution is installed. The integrated PSU, WiFi 6 and compact chimney style cooling keep the physical footprint small while still supporting continuous operation as a low to moderate power SSD based server. The main limitation is that PCIe lane allocation and the N150 CPU cap per drive performance and the unit can run hot under sustained load, so you do not get high end NVMe speeds from each slot and there is no turnkey NAS OS included. It is therefore best suited to buyers who value maximum flash capacity per dollar in a very small chassis and are comfortable treating it as a DIY NAS platform rather than a plug-and-play appliance.

What we said in our June ’25 Review HERE:

The Beelink ME Mini NAS delivers an uncommon blend of size, functionality, and efficiency in a market segment often dominated by larger, louder, and less integrated alternatives. It is not designed to compete with traditional enterprise-grade NAS devices or modular, scalable solutions for prosumers. Instead, its strengths lie in targeting the needs of home users who want a quiet, energy-efficient storage solution that is easy to deploy, aesthetically unobtrusive, and capable of handling daily tasks such as media streaming, file backup, or soft routing. The inclusion of six M.2 NVMe SSD slots—paired with a Gen 3 x2 system slot—offers a rare level of expansion in such a small enclosure. The integration of an internal PSU, silent fan-assisted cooling, and a surprisingly effective thermal design are thoughtful touches that differentiate it from the majority of DIY NAS mini PCs.

That said, it is not without limitations. The memory is non-upgradable, thermal accumulation at the base suggests room for improvement, and bandwidth ceilings imposed by Gen 3 x1 lanes will constrain users who demand high parallel throughput. Still, for its price point—particularly when pre-order discounts are applied—the ME Mini offers significant value, especially when compared to ARM-based NAS solutions with similar or lower specifications. With bundled Crucial SSD options and support for a wide range of NAS operating systems, it positions itself as a ready-to-go platform for tech-savvy users wanting to avoid the assembly of a fully DIY system. Overall, while not a product for every use case, the Beelink ME Mini succeeds in its aim to be a compact, stylish, and capable home NAS.

BUILD QUALITY - 9/10

HARDWARE - 8/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 10/10

8.8

PROS

Compact cube design (99x99x99mm) ideal for discreet home deployment
Supports up to 6x M.2 NVMe SSDs with total capacity up to 24TB
Integrated PSU eliminates bulky external power adapters
Dual 2.5GbE LAN ports with link aggregation support
Wi-Fi 6 and UnRAID7 Support means not limited to 2x2.5G
Low power consumption (as low as 6.9W idle, ~30W peak with full load)
Silent fan and effective internal thermal management via large heatsink
Includes Crucial-branded SSDs in pre-configured options for reliability

CONS

Five of the six SSD slots are limited to PCIe Gen 3 x1 bandwidth
Memory is soldered and non-upgradable
Not 10GbE Upgradable (maybe m.2 adapter - messy)
Bottom panel retains heat due to lack of active ventilation

#4 Xyber Hydra N150 – around $208 to $249

SPECS: Intel Processor N150 quad core up to 3.6 GHz – 16 GB LPDDR5 – 0 x SATA bays / 4 x M.2 2280 NVMe PCIe 3.0 x2 slots – 2 x 2.5 GbE RJ45 plus WiFi 6 – 64 GB eMMC with Ubuntu preinstalled and 512 GB NVMe SSD included on many models.

The Xyber Hydra N150 aims at budget buyers who want an NVMe based NAS that is closer to ready out of the box, combining 4 PCIe 3.0 x2 M.2 bays with 16 GB of memory, preloaded Ubuntu and often a preinstalled 512 GB NVMe system drive. That combination makes it straightforward to stand up containers, Docker stacks or lightweight NAS services immediately, then expand capacity by populating the remaining M.2 slots with SSDs as budget allows. Dual 2.5 GbE ports with link aggregation give enough network bandwidth to take advantage of parallel NVMe arrays for home lab or small office workloads, and the revised metal baseplate plus dual fan cooling run cooler than earlier G9 derived designs while still keeping power use modest. The main limitation at this price is that RAM is soldered and each M.2 slot is only x2, so neither memory capacity nor per drive bandwidth can be increased later, and some tuning of fan curves is needed to keep thermals in check under heavy use. For users who want an inexpensive, compact NVMe appliance with more polish than bare boards but are comfortable managing their own OS and RAID layout, it offers a pragmatic middle ground.

What we said in our July ’25 Review HERE:

The Xyber Hydra N150 NAS represents a deliberate and measured evolution of the budget-friendly compact NAS formula, clearly designed to resolve key weaknesses of similar products like the GMKTec G9 without altering the fundamental architecture. Its use of a thicker, thermally conductive metal base plate provides demonstrable improvement in heat dissipation compared to the plastic underside of the G9, a difference borne out in extended load testing where temperatures stabilized more quickly and stayed lower when fan profiles were adjusted. The pre-installed 64GB eMMC module running Ubuntu out of the box eliminates the initial configuration barrier often faced by novice users, while still allowing more experienced users to easily replace it with their OS of choice, such as ZimaOS or TrueNAS. The inclusion of a 512GB NVMe SSD in the primary M.2 bay adds immediate storage capacity without requiring an upfront investment in additional drives, an uncommon but practical feature at this price point.

Internally, the decision to provide 16GB of fixed LPDDR5 memory — 4GB more than its nearest comparable competitor — gives the Hydra slightly more headroom for memory-intensive tasks, such as running lightweight container workloads or maintaining a larger metadata cache for media streaming applications. While the memory remains non-upgradable, the choice of capacity is a reasonable compromise given the constraints of the Intel N150 platform and the system’s focus on cost efficiency. The integrated Wi-Fi 6 module, with dual antennas and full UnRAID compatibility, is another meaningful addition, enabling wireless deployments where cabling is impractical and expanding the deployment scenarios for home and small office users. These subtle but important upgrades make the Hydra feel more complete out of the box, catering to a broader range of use cases with fewer compromises.

That said, the Hydra still shares many of the inherent trade-offs of its class. The N150 processor is adequate for modest workloads, but becomes saturated under sustained high parallel usage, especially when all four M.2 slots are simultaneously active and the CPU nears 100% utilization. The PCIe lane limitations of the platform, with each M.2 slot limited to Gen3 x2 speeds, restrict the aggregate performance potential of RAID arrays or concurrent high-bandwidth operations. Similarly, the continued reliance on dual 2.5GbE ports limits maximum external throughput despite the internal SSD bandwidth being capable of more, and although M.2-to-10GbE adapters remain an option, they come at the cost of sacrificing one storage slot. BIOS-level adjustments are also required to extract the best thermal and fan performance under heavy use, something that more advanced users will appreciate but could frustrate beginners.

Overall, at its introductory price of $218.99, the Xyber Hydra N150 achieves a strong balance of value, practicality, and refinement in the entry-level NAS segment. The thoughtful inclusion of extras — the 64GB bootable eMMC, 512GB SSD, improved cooling, and additional memory — make it feel more turnkey than competing models, while still leaving room for advanced customization. It’s a sensible option for users seeking a compact and efficient NAS for personal cloud storage, light virtualization, or as a dedicated media server, provided expectations around CPU and networking throughput are kept realistic. For its target audience, the Hydra is a compelling and notably improved choice that addresses many of the criticisms of earlier designs without abandoning the affordability that defines this class of devices.

BUILD QUALITY - 7/10

HARDWARE - 7/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 9/10

8.0

PROS

Improved thermal design with a thicker metal base plate for better heat dissipation compared to similar models.
Includes 64GB eMMC storage preloaded with Ubuntu OS for out-of-the-box usability.
Ships with a 512GB M.2 NVMe SSD in Bay 1, providing immediate usable storage.
Fixed 16GB LPDDR5 memory — higher than comparable devices — supports more concurrent tasks.
Wi-Fi 6 module with dual antennas, compatible with UnRAID, enabling flexible wireless deployment.
Four M.2 NVMe bays, each supporting PCIe Gen3 x2, allowing up to 4 SSDs for flash storage arrays.
Dual 2.5GbE ports with link aggregation support for improved network throughput.
Compact, quiet, and energy-efficient form factor suitable for home and small office environments.

CONS

Memory is soldered and non-upgradable, limiting future scalability.
PCIe Gen3 x2 and CPU bandwidth constraints limit maximum aggregate performance under full load.
Fans require BIOS adjustments for optimal thermal control during heavy sustained workloads.

#5 ZimaBoard 2 1664 – $239 to $349

SPECS: Intel Processor N150 quad core up to 3.6 GHz – 16 GB LPDDR5X – 2 x SATA 3.0 ports (via cables to external drives) – 2 x 2.5 GbE RJ45 – 1 x PCIe 3.0 x4 slot, 64 GB eMMC OS storage.

ZimaBoard 2 1664 is a single board x86 server positioned for budget home lab builders who want more flexibility than a fixed enclosure can offer while staying under typical entry level NAS pricing. The board exposes 2 SATA ports with power for attaching HDDs or SSDs in whatever chassis or external mounting the user prefers, alongside dual 2.5 GbE, USB 3, Mini DisplayPort and a full PCIe 3.0 x4 slot that can host extra NICs, HBAs or NVMe adaptors to scale storage and connectivity over time. ZimaOS comes preinstalled and supports alternative systems such as CasaOS, Linux and Windows, so it can act as a low cost base for self hosted services, small virtualisation labs or custom NAS builds using external drive cages or repurposed cases. The main limitation is that there is no built in drive bay system or enclosure, so buyers must factor in the cost and effort of adding their own storage chassis, cabling and cooling if they want something as neat as a traditional NAS. For those willing to do that, it offers one of the most flexible and expandable x86 platforms in the budget bracket, with enough CPU and RAM headroom to grow beyond simple file serving as needs evolve.

What we said in our April ’25 Review HERE:

The ZimaBoard 2 is a competent and thoughtfully assembled single-board server that builds meaningfully on IceWhale’s earlier efforts, especially the original ZimaBoard and the ZimaBlade. Its design clearly targets users who want more flexibility and performance than traditional ARM-based boards can offer, but who also value power efficiency, silence, and a small footprint. The use of an Intel N150 CPU, 8GB of LPDDR5x memory, dual 2.5GbE ports, and a PCIe 3.0 x4 slot makes it viable for a variety of home server roles—from basic NAS and smart home coordination to lightweight container hosting and local media streaming. Features like onboard SATA, USB 3.1, and a DisplayPort connection further add to its utility. However, there are hardware limitations that may affect long-term suitability for advanced deployments. The soldered RAM cannot be upgraded, and the internal eMMC storage, while useful for initial setup, is too slow for OS-level responsiveness in more demanding use cases. Passive cooling, while appreciated for silence, also imposes some thermal limitations depending on the deployment environment.

On the software side, ZimaOS offers a decent out-of-the-box experience that caters to users with minimal technical background. It handles core tasks like application deployment, file sharing, and system monitoring without requiring advanced configuration, and its Docker-based App Store simplifies access to popular tools. For more experienced users, the system supports third-party OS installation, which is likely how many will ultimately use the ZimaBoard 2. Still, as a bundled solution, ZimaOS has matured significantly and now presents itself as a lightweight, capable, and non-intrusive platform for those who prefer to get started immediately. In the broader context of DIY server hardware, ZimaBoard 2 occupies a middle ground: more powerful and modular than Raspberry Pi-class systems, yet more constrained than full x86 mini PCs or enthusiast-grade NAS hardware. For those who understand and accept these trade-offs, and are willing to plan around its limitations, the ZimaBoard 2 offers a reliable and flexible foundation for compact, energy-efficient computing at the edge.

BUILD QUALITY - 10/10

HARDWARE - 8/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 10/10

9.0

PROS

x86 Architecture – Compatible with a wide range of operating systems including ZimaOS, Unraid, TrueNAS SCALE, and Proxmox.
Dual 2.5GbE LAN Ports – Offers strong networking capabilities for multi-service workloads and gateway setups.
PCIe 3.0 x4 Slot – Enables high-speed expansion for 10GbE NICs, NVMe storage, or combo cards.
Fanless, Silent Operation – Completely passively cooled, ideal for home or quiet office environments.
Compact and Durable Build – Small footprint with an all-metal chassis that doubles as a heatsink.
ZimaOS Included – User-friendly OS with a Docker-based App Store and basic VM tools, ready out of the box.
Flexible Storage Options – Dual SATA ports plus USB 3.1 support for connecting SSDs, HDDs, or external drives.
Low Power Consumption – Efficient 6W CPU with ~10W idle and ~40W max under heavy load scenarios.

CONS

Non-Upgradable RAM – 8GB of soldered LPDDR5x limits long-term scalability for memory-intensive tasks.
Slow/Small Default Internal Storage – 32GB eMMC is convenient but underperforms for OS-level responsiveness or high I/O workloads.
Thermal Headroom is Limited – Passive cooling alone may not be sufficient in closed environments or under sustained load without added airflow.
Not Launching on Traditional Retail, but instead on Crowdfunding.

Taken together, the UGREEN DH2300, UniFi UNAS 2, Beelink ME Mini, Xyber Hydra N150 and ZimaBoard 2 show the different ways vendors are trying to hit the sub 250 dollar bracket without stripping out the core value of a NAS. Some focus on simplicity and bundled software with limited scale, others trade turnkey polish for dense NVMe storage or flexible bare board layouts that assume you are willing to do more of the setup yourself. None of these devices removes the usual compromises around bays, performance, noise or software maturity at this price level, but each offers a clear path away from pure cloud dependence and USB drives. The practical decision is less about which is objectively “best” and more about whether you want a small 2 bay appliance, a compact all flash cube or a configurable single board system that can grow with your skills and requirements over time.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

Want to follow specific category? Also Read... Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Best NAS of the Year 2025

Network attached storage in 2025 has shifted from being a niche utility to a central part of how many homes, studios and small businesses manage data. Rising storage needs, more capable low power CPUs and a renewed interest in self hosted services have produced a wave of compact, power efficient systems alongside more traditional multi bay enclosures. This article identifies a small group of NAS devices that stood out during 2025 for their hardware design, price-to-performance balance or the specific problems they address, rather than for brand familiarity alone. To qualify for inclusion, a NAS had to be commercially available for general sale during 2025, not an older carry over model or a crowdfunded prototype. No Kickstarter, Indiegogo or pre production units were considered, and devices that only existed as region locked or short lived batches were excluded where availability could not be reasonably confirmed. Both turnkey systems with bundled NAS operating systems and OS agnostic, barebones style hardware are included, provided they offer a clear proposition for real world use in home lab, small business or mobile workflows.

Honourary Mention – The UniFi UNAS Series – $199 to $799

SPECS: Quad core ARM Cortex A55 or A57 at 1.7 to 2.0 GHz – 4 to 16 GB LPDDR4 – 2 to 8 x 3.5″ SATA bays – 1 x 2.5 GbE RJ45 / 1 x 1 GbE RJ45 / up to 3 x 10 GbE (RJ45 and SFP+) – 0 or 2 x M.2 NVMe SSD slots for cache (depending on model).

While not a single flagship unit, UniFi’s expanded UNAS NAS range in 2025 merits an honorary mention as a platform level development. Moving from a single NAS offering in 2024 to multiple UNAS models in 2025, UniFi shifted from dabbling in storage to positioning itself as a serious option for small business, UniFi centric home labs and integrators that want storage tightly aligned with existing UniFi networking and management.

The significance here is not an isolated specification or feature, but the fact that a major networking vendor is rapidly building out a NAS portfolio at a time when private data ownership, self hosted services and integrated stacks are becoming more important, adding competitive pressure on more established, slower moving NAS brands.

UNAS UNAS 2 – 2-Bay NAS – $199	UNAS UNAS Pro 8 – 8-Bay NAS – $799

#1 Aoostar WTR Max – $599-699

SPECS: AMD Ryzen 7 Pro 8845HS – up to 128 GB DDR5 ECC via 2 SODIMM slots – 6 x 3.5″/2.5″ SATA bays – 2 x 2.5 GbE RJ45 / 2 x 10 GbE SFP+ – 5 x M.2 2280 NVMe PCIe 4.0 slots.

The Aoostar WTR Max is a prebuilt, OS agnostic NAS chassis that stands out for its hardware density at its price point. It combines 6x hard drive bays with 4x M.2 NVMe slots, dual 10 GbE networking and an AMD server grade platform with ECC memory support in a compact enclosure that has been noted for effective cooling relative to its size. Rather than tying buyers to a proprietary operating system, it is intended to run third party NAS or server platforms, which gives it flexibility but also means any software integration and management experience depends on the OS the user chooses to deploy. Throughout 2025 it has frequently been in short supply, indicating sustained demand from home lab users and small operators who want near turnkey hardware with specifications that would be expensive to replicate via a fully DIY build.

What We Said in our June ’25 review HERE: The Aoostar WTR Max stands out as a rare blend of high storage density, advanced connectivity, and raw compute performance in a compact NAS form factor, making it well-suited for experienced users seeking a versatile, self-managed platform. With support for up to 11 drives—six SATA and five NVMe Gen 4—paired with an enterprise-grade Ryzen 7 PRO 8845HS CPU and ECC memory compatibility, the system offers workstation-class capabilities for storage-heavy workflows, including virtualization, multimedia processing, and hybrid file serving. Dual 10GbE SFP+ and dual 2.5GbE ports provide ample bandwidth for multi-user access or isolated subnet roles, while the OCuLink interface enables high-speed external expansion, compensating for the absence of a traditional PCIe slot. Additional benefits like a fully customizable LCD status display, low fan noise, and consistently low thermals under load reinforce the system’s value in 24/7 deployments.

However, the WTR Max does present some caveats—namely, internal NVMe cross-performance appears constrained by shared bandwidth, and the lack of an internal PCIe slot could be limiting for users requiring more conventional upgrade paths. The LCD panel’s configuration software also proved cumbersome, raising security flags and requiring manual IP client setup, which may deter less technically inclined users. Lastly, the use of an external 280W PSU—while effective—won’t appeal to those expecting internal power integration in a workstation-style chassis. Nonetheless, for users who value full control over their NAS stack and want to avoid restrictive ecosystems, the WTR Max delivers a rare combination of hardware freedom and scalability that few turnkey systems offer in this price and size category.

BUILD QUALITY - 10/10

HARDWARE - 10/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 9/10

9.2

PROS

High Storage Density in Compact Form
Supports up to 11 drives (6x SATA + 5x NVMe) in a desktop-sized chassis, ideal for users with large-scale storage needs but limited physical space.

Enterprise-Class CPU with ECC Support
AMD Ryzen 7 PRO 8845HS offers 8C/16T performance, ECC memory support, and integrated RDNA 3 graphics—rare at this price and size.

Dual 10GbE SFP+ and Dual 2.5GbE Networking
Provides flexible, high-throughput networking for content creators, virtual environments, or advanced home labs.

Strong Virtualization and Transcoding Performance
Smooth Proxmox VM hosting and real-time Plex 4K/8K transcoding using Radeon 780M hardware acceleration.

OCuLink PCIe Expansion Port
Enables high-speed external storage or GPU support without sacrificing internal NVMe bandwidth.

Customizable LCD Monitoring Panel
Real-time display of system metrics (CPU, RAM, network, storage) with theme options, useful for headless setups.

Robust Cooling System with Vapor Chamber
Glacier Pro 1.0 design keeps thermals in check across four fans and distinct airflow zones; low fan noise even under load.

Open Software Ecosystem
No proprietary OS or restrictions; supports TrueNAS, Unraid, Proxmox, or Linux-based setups for full admin control.

CONS

Limited Internal NVMe Cross-Throughput
Inter-M.2 transfer speeds are capped (~500–600 MB/s), possibly due to shared chipset lanes or controller design.

No Internal PCIe Slot
Expansion is limited to OCuLink; users needing traditional PCIe cards (e.g., GPUs or HBAs) may find this restrictive.

LCD Panel Software Can Be Problematic
Configuration software raised browser security flags and requires static IP client setup, making it less accessible.

External Power Brick Only
280W external PSU is functional but not ideal for rackmount or integrated enclosures; some users may prefer internal ATX power.

#2 Minisforum N5 NAS – $549-599

SPECS: AMD Ryzen 7 255 or AMD Ryzen AI 9 HX Pro 370 – up to 96 GB DDR5 (ECC on N5 Pro) – 5 x 3.5″/2.5″ SATA bays – 1 x 5 GbE RJ45 / 1 x 10 GbE RJ45 – 3 x M.2 NVMe slots (2 convertible to U.2, PCIe 4.0).

The Minisforum N5 is a compact 5-bay NAS that targets users who want preconfigured hardware with some workstation derived design features. It uses an x86 CPU in the same general class as the Aoostar WTR Max, paired with an internal storage module of 64 GB for the system volume, and is typically sold in the 599 to 699 USD range, with the separate Pro variant occupying a higher bracket. The chassis integrates a removable drive base section for easier maintenance, and the platform includes multi-gig networking up to 10 GbE and 5 GbE, a PCIe expansion slot and USB4 connectivity for additional bandwidth or external devices. Minisforum ships the N5 with its own NAS operating system to provide an immediate out of box experience, but the software is still relatively young and many buyers elect to overwrite the included module with a more established NAS or server OS. Throughout 2025, availability has been intermittent, reflecting a level of demand from home lab users who want higher specification NAS hardware without building entirely from individual components.

What we said in our July ’25 Review HERE:

The Minisforum N5 Pro is an impressive and highly versatile NAS platform that successfully combines the core strengths of a storage appliance with the capabilities of a compact, workstation-class server, making it suitable for demanding and varied use cases. Its defining features include a 12-core Ryzen AI 9 HX PRO 370 CPU with 24 threads and onboard AI acceleration up to 50 TOPS, support for up to 96GB of ECC-capable DDR5 memory for data integrity, and a hybrid storage architecture offering up to 144TB total capacity through a mix of five SATA bays and three NVMe/U.2 slots. Additional highlights such as ZFS file system support with snapshots, inline compression, and self-healing, along with high-speed networking via dual 10GbE and 5GbE ports, and expansion through PCIe Gen 4 ×16 and OCuLink interfaces, position it well beyond the capabilities of typical consumer NAS systems. The compact, fully metal chassis is easy to service and efficiently cooled, enabling continuous operation even under sustained virtual machine, AI, or media workloads.

At the same time, the bundled MinisCloud OS, while feature-rich with AI photo indexing, Docker support, and mobile integration, remains a work in progress, lacking some enterprise-grade polish, robust localization, and more advanced tools expected in mature NAS ecosystems. Minor drawbacks such as the external PSU, the thermally challenged pre-installed OS SSD, and the higher cost of the Pro variant relative to the standard N5 are important to weigh, particularly for users who may not fully utilize the Pro’s ECC and AI-specific advantages. For advanced users, homelab builders, and technical teams who require high compute density, flexible storage, and full control over their software stack, the N5 Pro delivers workstation-level performance and configurability in NAS form—offering one of the most forward-thinking and adaptable solutions available today in this segment.

The is now available to buy: Minisforum N5 Pro (Check Amazon) – HERE Minisforum N5 Pro (Check AliExpress) – HERE Shop for NAS Hard Drives on Amazon – HERE Shop for SSDs for your N5 Pro on Amazon – HERE

BUILD QUALITY - 10/10

HARDWARE - 9/10

PERFORMANCE - 9/10

PRICE - 7/10

VALUE - 8/10

8.6

PROS

High-performance AMD Ryzen AI 9 HX PRO 370 CPU with 12 cores, 24 threads, and AI acceleration (50 TOPS NPU) is INCREDIBLE for a compact desktop purchase
Support for up to 96GB DDR5 memory with ECC, ensuring data integrity and stability in critical environments
ZFS-ready storage with numerous ZFS and TRADITIONAL RAID configurations, snapshots, and inline compression
Hybrid storage support: five 3.5\\\"/2.5\\\" SATA bays plus three NVMe/U.2 SSD slots, with up to 144TB total capacity
Versatile expansion options including PCIe Gen 4 ×16 slot (×4 electrical) and OCuLink port for GPUs or NVMe cages
Dual high-speed networking: 10GbE and 5GbE RJ45 ports with link aggregation support + (using the inclusive MinisCloud OS) the use of the USB4 ports for direct PC/Mac connection!
Fully metal, compact, and serviceable chassis with thoughtful cooling and accessible internal layout - makes maintenance, upgrades and troubleshooting a complete breeze!
Compatibility with third-party OSes (TrueNAS, Unraid, Linux) without voiding warranty, offering flexibility for advanced users

CONS

MinisCloud OS is functional but immature, with unfinished localisation and limited advanced enterprise features - lacks MFA, iSCSI, Security Scanner and More. Nails several key fundamentals, but still feels unfinished at this time.
Despite External PSU design (will already annoy some users), it generates a lot of additional heat and may not appeal to all users overall
Preinstalled 64GB OS SSD runs hot under sustained use and lacks dedicated cooling. Plus, losing one of the 3 m.2 slots to it will not please everyone (most brands manage to find a way to apply an eMMC into the board more directly, or use a USB bootloader option as a gateway for their OS
Premium $1000+ pricing may be hard to justify for users who don’t need ECC memory or AI capabilities compared to the standard N5 at $500+

#3 Beelink ME Mini N150 NAS – $209-299

SPECS: Intel N150 quad core Twin Lake SoC up to 3.6 GHz – 12 GB LPDDR5 (with 16 GB LPDDR5 variant announced) – 6 x M.2 2280 SSD bays – dual 2.5 GbE RJ45 / WiFi 6 – 6 x M.2 NVMe PCIe 3.0 slots (5 x1 / 1 x2, one slot also supporting SATA SSD).

The Beelink ME Mini N150 is an all flash, ultra compact NAS style platform built around 6x M.2 NVMe bays, an Intel N150 CPU and 12 to 16 GB of memory, aimed at low power home lab and edge storage roles. It typically ships in the 200 to 250 USD bracket depending on retailer and configuration, and includes a small amount of onboard eMMC storage intended for the operating system, with users commonly installing Linux distributions such as Ubuntu or other lightweight NAS platforms. Connectivity includes dual 2.5 GbE ports, making it suitable for multi gig networks despite its size, and its idle power draw with all slots populated has been measured in the sub 10 to 12 W range, which positions it as an efficient always on node. While comparable N150 based systems from GMKTEC and turnkey brands like TerraMaster arrived in the same period, the ME Mini gained wider attention in 2025 because its combination of price, power envelope and density is difficult to match via a conventional DIY build using standard motherboards and cases.

What we said in our June ’25 Review HERE:

The Beelink ME Mini NAS delivers an uncommon blend of size, functionality, and efficiency in a market segment often dominated by larger, louder, and less integrated alternatives. It is not designed to compete with traditional enterprise-grade NAS devices or modular, scalable solutions for prosumers. Instead, its strengths lie in targeting the needs of home users who want a quiet, energy-efficient storage solution that is easy to deploy, aesthetically unobtrusive, and capable of handling daily tasks such as media streaming, file backup, or soft routing. The inclusion of six M.2 NVMe SSD slots—paired with a Gen 3 x2 system slot—offers a rare level of expansion in such a small enclosure. The integration of an internal PSU, silent fan-assisted cooling, and a surprisingly effective thermal design are thoughtful touches that differentiate it from the majority of DIY NAS mini PCs.

That said, it is not without limitations. The memory is non-upgradable, thermal accumulation at the base suggests room for improvement, and bandwidth ceilings imposed by Gen 3 x1 lanes will constrain users who demand high parallel throughput. Still, for its price point—particularly when pre-order discounts are applied—the ME Mini offers significant value, especially when compared to ARM-based NAS solutions with similar or lower specifications. With bundled Crucial SSD options and support for a wide range of NAS operating systems, it positions itself as a ready-to-go platform for tech-savvy users wanting to avoid the assembly of a fully DIY system. Overall, while not a product for every use case, the Beelink ME Mini succeeds in its aim to be a compact, stylish, and capable home NAS.

BUILD QUALITY - 9/10

HARDWARE - 8/10

PERFORMANCE - 8/10

PRICE - 9/10

VALUE - 10/10

8.8

PROS

Compact cube design (99x99x99mm) ideal for discreet home deployment
Supports up to 6x M.2 NVMe SSDs with total capacity up to 24TB
Integrated PSU eliminates bulky external power adapters
Dual 2.5GbE LAN ports with link aggregation support
Wi-Fi 6 and UnRAID7 Support means not limited to 2x2.5G
Low power consumption (as low as 6.9W idle, ~30W peak with full load)
Silent fan and effective internal thermal management via large heatsink
Includes Crucial-branded SSDs in pre-configured options for reliability

CONS

Five of the six SSD slots are limited to PCIe Gen 3 x1 bandwidth
Memory is soldered and non-upgradable
Not 10GbE Upgradable (maybe m.2 adapter - messy)
Bottom panel retains heat due to lack of active ventilation

#4 Lincplus Lincstation N2 – $399-449

SPECS: Intel N100 quad core up to 3.4 GHz – 16 GB LPDDR5 – 2 x 2.5″ SATA bays / 4 x M.2 NVMe bays (total 6 bays) – 1 x 10 GbE RJ45 – 4 x M.2 2280 NVMe SSD slots.

The Lincstation N2 is a compact prebuilt NAS positioned primarily on value, combining an Intel N100 quad core CPU, 16 GB of non upgradable memory and 10 GbE networking in a small chassis. Storage is split between 4x M.2 NVMe bays and 2x 2.5 inch SATA bays, giving a mix of high speed solid state and more conventional, higher capacity drives, with visible status LEDs on the exterior. Typical street pricing in 2025 has been around 400 to 450 USD depending on tax and discounts, but its effective cost is reduced further by the inclusion of an Unraid license, which separately represents a non trivial software expense and is pre supported via a USB loader for straightforward deployment. While the N100 CPU and PCIe lane distribution place it below some competing platforms in raw performance, the combination of 10 GbE, mixed media bays, bundled software and small footprint makes it a distinct option for users who prioritise overall throughput and licensing value rather than maximum compute power.

What we said in our Jan ’25 Review HERE:

The Lincstation N2 NAS is a solid upgrade over its predecessor, the N1, offering better connectivity, improved cooling, and more efficient hardware. The inclusion of 10GbE networking makes it a more appealing option for users who require higher data transfer speeds, and the passive and active cooling improvements ensure better thermal regulation under sustained workloads. With support for four M.2 NVMe SSDs and two SATA SSDs, the N2 provides flexible storage options, allowing users to build a high-speed, all-flash NAS setup. The Intel N100 processor and 16GB LPDDR5 memory deliver decent performance for most home and small business NAS applications, but the non-upgradeable memory may be a limiting factor for more demanding users. The compact, efficient design makes it an ideal NAS for those looking for a balance between power efficiency and performance.

That being said, the N2 does have a few drawbacks that may impact users looking for greater expandability. The lack of PCIe expansion slots means users cannot add additional NICs or storage controllers, making it less versatile compared to some competing NAS solutions. Additionally, while the 10GbE port is a significant upgrade, it is limited by PCIe bandwidth constraints, meaning users may not be able to fully utilize its maximum throughput in all scenarios. The USB connectivity options are decent, but having only one high-speed USB-C 10Gbps port may feel restrictive for those wanting multiple fast external connections. Furthermore, the reliance on a barrel-type power connector instead of USB-C is another missed opportunity for modernization.

Overall, the Lincstation N2 NAS remains a good choice for UnRAID users looking for an affordable, high-speed, all-flash NAS solution. It provides great energy efficiency, a streamlined setup process, and a solid mix of connectivity options. While it lacks some scalability features, for most home and small business users, it offers a compelling blend of performance, efficiency, and ease of use. If Lincplus continues refining their NAS lineup, future iterations with more robust networking, storage expandability, and minor refinements to cooling and connectivity could make it a standout competitor in the small NAS market.

SOFTWARE - 9/10

HARDWARE - 8/10

PERFORMANCE - 7/10

PRICE - 8/10

VALUE - 9/10

8.2

PROS

10GbE networking for high-speed transfers
Compact, silent, and power-efficient
Includes 1 Year UnRAID license for easy setup
Supports four M.2 NVMe SSDs and two SATA SSDs
Low power consumption and passive+active cooling
Improved design over the N1 with better airflow

CONS

Limited PCIe lanes affecting 10GbE throughput
Non-upgradeable RAM (fixed 16GB LPDDR5)
N100 CPU has very recently seen a refresh towards the N150
Uses a barrel-type power adapter instead of USB-C

#5 UnifyDrive UT2 Mobile NAS – $399-599

SPECS: ARM 8 core processor (2 x quad core SoCs) up to 2.0 GHz – 8 GB LPDDR4X – 2 x M.2 NVMe bays – 1 x 2.5 GbE RJ45 / WiFi 6 – 2 x M.2 2280 NVMe SSD slots.

The UnifyDrive UT2 is a dual M.2 NVMe mobile NAS that targets content creators and field teams who need portable, battery backed storage rather than a static rack or desktop system. It is built around an 8 core ARM platform (implemented as 2 quad core chips) with 8 GB of memory, 2.5 GbE networking, WiFi 6 support and can act as an access point, with additional connectivity via USB type C, USB type A and dual SD card slots. UniFi supplies its own NAS operating system, which covers file sharing, backup, containers and an app center but does not provide full virtual machine hosting, and the unit can also operate as a direct attached storage device over USB. An internal 2200 mAh battery provides roughly 2 hours of standalone use and the device can also be powered from an external USB power bank, allowing workflows where camera media is ingested on location, duplicated to other storage or cloud targets and then transported while tasks continue in the background. Pricing during 2025 has generally ranged between 399 and 599 USD depending on promotions, positioning the UT2 as a niche but distinct option for mobile data capture and collaboration rather than a traditional always on NAS.

What we said in our April ’25 Review HERE:

The UnifyDrive UT2 Portable NAS offers a compact, portable storage solution designed for users who need on-the-go data management. Its features include a built-in battery, Wi-Fi 6, 2.5Gb Ethernet, HDMI output, and dual M.2 NVMe SSD slots, which together make it capable of handling media playback, file storage, and real-time collaboration. The UT2 also includes UDR selective RAID, one-touch SD card backups, and an AI-powered photo recognition system, all controlled through a user-friendly mobile app. These features position the UT2 as a versatile device for professionals such as photographers and content creators, who need portable, high-speed data storage and secure file management.

As a crowdfunded product, the UT2 is set to launch on Kickstarter, meaning there are some inherent risks associated with its development. While the hardware and software shown in the review appear polished and near completion, the final product may vary from the reviewed unit, and there is no guarantee of timely delivery or final quality. The early-bird price of $399 may appeal to those looking for a portable NAS, though the full retail price of $599 could place it in competition with larger, full-featured NAS systems. Potential backers should consider these factors when deciding whether to support the project.

+ Get a further 5% OFF with this code: NASCOMPARES

BUILD QUALITY - 10/10

HARDWARE - 9/10

PERFORMANCE - 8/10

PRICE - 8/10

VALUE - 8/10

8.6

PROS

Compact and Portable: Small, lightweight design makes it easy to carry, ideal for on-the-go professionals.
Built-in Battery: The 2200mAh battery provides up to an hour of runtime without external power, offering flexibility in mobile environments.
Wi-Fi 6 and 2.5Gb Ethernet: High-speed network options ensure fast file transfers and smooth data access.
Dual M.2 NVMe SSD Slots: Supports up to two NVMe SSDs, offering high-speed storage options.
HDMI Output: Enables media playback and control via remote, supporting up to 8K video for a versatile media experience.
One-Touch Backup: Simple SD and CFe card backup with a single button, ideal for photographers and videographers.
User-Friendly Mobile App: Intuitive control via iOS and Android, with detailed system monitoring and management features.
UDR Selective RAID: Offers flexible RAID-like redundancy on a folder level, allowing selective data protection without using the full capacity.
AI-Powered Photo Recognition: Includes facial and object recognition, enhancing media organization.
Multiple Connectivity Options: USB, Ethernet, and wireless options provide flexibility for different use cases.

CONS

Heavily Dependent on Software Support: Long-term functionality and feature enhancements will rely on continuous software updates, which are not guaranteed.
Crowdfunding Risks: As a crowdfunded product, there\\\'s uncertainty about delivery timelines and the final product quality.
Non-Upgradable RAM: The 8GB of RAM is soldered, limiting future scalability as storage or performance needs grow.
Price at Full Retail: At $599, it approaches the cost of larger, more powerful NAS systems, making it less competitive for budget-conscious buyers.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

Want to follow specific category? Also Read...Best NAS of the Year 2025Best NAS for Under $249 (2025/Best NAS for Under $499 (2025/Best NAS for Under $250Best NAS for Under $499Best NAS for $500Best NAS for Under $499Best NAS for Under $249Best NAS for Under $249 in 202The Best NAS for $500 / £500 Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE