The UniFi UPS-Tower 600W UPS Review

UPDATE – The Desktop UPS TOWER is available HERE for $159 , and the 2U Rackmount UPS-2U is available later in Q4 2025 HERE for $279

UniFi’s entry into the uninterruptible power supply market brings two distinct solutions tailored for professional and prosumer environments: the UPS-Tower desktop model and the UPS-2U Rackmount unit. The tower configuration provides 1,000VA / 600W of backup capacity and uses a single 12V, 9Ah lead-acid battery, while the larger 2U rackmount version scales up to 1,440VA / 1,000W with dual battery modules. Both adopt a line-interactive architecture with simulated sine wave output, a 6–10 ms transfer time, and Ethernet-based network management. Integration is handled natively within UniFi Network, where users can adopt, monitor, and configure the UPS directly from the UniFi Controller interface. For non-UniFi deployments, both models retain NUT (Network UPS Tools) compatibility for safe shutdown and system monitoring. This marks a significant expansion of UniFi’s ecosystem into power management and continuity—areas traditionally dominated by brands like APC and CyberPower—positioning UniFi’s UPS line as a bridge between smart network infrastructure and automated power protection.

The UniFi UPS-Tower 1000VA / 600W Review – Quick Conclusion

The UniFi UPS-Tower and UPS-2U deliver practical and ecosystem-focused power protection for small network environments. Both models emphasize integration and manageability rather than raw performance, providing stable 120V line-interactive backup power with simulated sine wave output. The tower model offers 600W of protection in a compact desktop enclosure, while the rackmount unit increases capacity to 1,000W with dual batteries. Integration through the UniFi Network Controller is straightforward, enabling central monitoring and alerting without external software. While limitations such as the lack of USB ports, PoE passthrough, and pure sine wave output restrict versatility outside the UniFi ecosystem, both units are solid entries for users seeking consistent, centrally managed backup power within UniFi-managed infrastructures.

The UniFi UPS-Tower UPS Review – Design & Connectivity

The UniFi UPS-Tower adopts a vertically oriented, compact chassis that measures 288 x 99 x 280.5 mm and weighs just over 8 kg. Its enclosure is built from a polycarbonate and ABS blend, which offers a balance between durability and low weight, and the overall shape resembles a small desktop speaker or heater.

The unit’s IP20 rating indicates it is intended for indoor use only, with ventilation panels positioned at the top, sides, and bottom to maintain airflow. During testing, internal temperatures averaged around 45–47°C after 24 hours of continuous operation, demonstrating stable thermal management for a unit of this density. The design is understated, with no LCD screen or physical display, relying instead on LED indicators and the UniFi interface for monitoring battery level and status.

In terms of connectivity, UniFi has implemented a clear division between power protection and control interfaces. On the rear panel, the UPS-Tower provides five surge-only outlets and five battery-backed surge-protected outlets, all of which are NEMA 5-15R ports suitable for 120V environments. The input connection uses a NEMA 5-15P plug, rated for 12A maximum load, supporting both 50 and 60 Hz operation. While this configuration is typical of compact line-interactive UPS units, the number of protected outlets is unusually high for its size, making it suitable for powering multiple small network devices, NAS units, or edge appliances simultaneously. However, only the five battery-backed ports will remain operational during a power loss.

UniFi has also included Ethernet management for remote monitoring and control. The rear I/O layout features a 100/10 MbE network connection that links the UPS directly into the UniFi ecosystem, as well as two GbE ports for surge in/out, allowing for protection of wired data paths. This implementation enables the UPS to send automatic notifications and power-state updates to the UniFi controller, ensuring that connected devices can safely power down when mains supply is interrupted. While users will not find USB connectivity here—a feature absent from both models—Ethernet management ensures seamless network-level integration with UniFi OS devices and provides remote monitoring capabilities not typically available in basic desktop UPS designs.

On the visual and operational interface side, UniFi relies on a multi-stage LED system to communicate battery and status information. A ring of LEDs on the front panel indicates power state, network connectivity, and battery percentage, with specific color patterns representing states such as initialization, adoption, or firmware upgrades. For example, a steady blue LED denotes normal operation, while flashing red signals a low battery, and alternating white/blue indicates firmware updating. This LED-centric approach aligns with UniFi’s existing product language and keeps the design minimalistic while relying on software integration for detailed telemetry.

Physically, the UPS-Tower fits neatly into a small office or studio environment, blending alongside UniFi routers or switches without dominating desk space. It operates quietly, with only a faint hum from the internal fan during battery mode. The 2U rackmount model, by contrast, uses a galvanized steel enclosure with front ventilation and nearly double the weight at 14 kg, prioritizing durability for data racks and wiring cabinets.

Both maintain an IP20 protection rating, ensuring basic safety against accidental contact but not dust or moisture resistance. Overall, UniFi’s approach emphasizes modularity, network integration, and compactness over display-driven functionality, positioning these UPS units as discreet but essential components within managed network setups.

The UniFi UPS-Tower UPS Review – Internal Hardware

Internally, the UniFi UPS-Tower follows a line-interactive architecture, combining voltage regulation with battery backup to ensure smooth transitions during power interruptions. The system utilizes an automatic voltage regulation (AVR) circuit that adjusts minor fluctuations in mains voltage without switching to battery mode, minimizing wear on the internal power cells. In the event of an outage or severe voltage dip, the UPS switches to battery operation within 6 to 10 milliseconds, maintaining output stability at 120V AC with a ±10% regulation margin. The waveform produced in battery mode is a simulated sine wave, which is adequate for most networking gear and consumer electronics, though not ideal for high-sensitivity audio, medical, or laboratory equipment. Power delivery remains consistent throughout short outages, allowing network hardware, NAS units, and servers to complete safe shutdown procedures.

The UPS-Tower contains a single 12V, 9Ah sealed lead-acid battery, user-removable via a bottom access panel. This design makes future maintenance straightforward, allowing owners to replace the battery when its capacity diminishes after several years of use. At full load (600W), the runtime averages around 2 minutes, while at half load, it extends to approximately 7 minutes before automatic shutdown. Recharge time to 90% capacity is listed at 6 to 8 hours. Thermal performance under sustained use is stable, and the inclusion of passive and active ventilation ensures no overheating under normal operating conditions. The system is also protected against short circuits, overloads, and over-voltage faults, automatically tripping into fault mode if thresholds of 110% to 120% load are exceeded.

Comparatively, the UPS-2U Rackmount uses a dual-battery setup with two 12V, 9Ah lead-acid modules to achieve 1,440VA / 1,000W output capacity. It shares the same waveform and transfer time but provides slightly extended runtime—2.3 minutes at full load and 8 minutes at half load—thanks to the added battery reserve. It also benefits from a galvanized steel chassis that enhances durability and is better suited for professional rack environments. Both systems are NDAA-compliant and certified under FCC, IC, UL 1778, and CSA C22.2 No. 107.3, ensuring safety and performance standards for commercial and residential use. In both models, system management and network telemetry are handled by a dedicated network controller chip, enabling UniFi OS integration and data synchronization with other UniFi devices.

The UniFi UPS-Tower UPS Review – Functionality

The UniFi UPS series is built around simplicity and ecosystem-level integration rather than feature-heavy configuration. Both the UPS-Tower and UPS-2U connect directly to the UniFi Network controller via Ethernet, where they appear alongside other UniFi devices for adoption. Once added, users can view real-time battery percentage, load level, input/output voltage, and system temperature directly from the UniFi interface. The units are also capable of sending power event notifications when mains power fails or returns, ensuring administrators receive alerts through the existing UniFi management system without relying on third-party monitoring software. This network-level approach allows the UPS to act as both a power backup and an automated coordination point for controlled shutdowns across UniFi infrastructure, such as Dream Machines, switches, or NAS units.

Integration with non-UniFi devices is handled through Network UPS Tools (NUT) compatibility. This makes the UPS-Tower particularly flexible in mixed environments where NAS devices or servers from other vendors, such as Synology or QNAP, require graceful shutdown when the UPS switches to battery mode. Users can define credentials and associate the UPS with NUT clients on the same network to relay status and trigger automated shutdowns once the battery reaches a predefined threshold. Although the review highlighted the lack of USB connectivity, which restricts plug-and-play use with devices expecting a traditional USB UPS handshake, the Ethernet management layer compensates by offering wider network-based communication. However, features such as per-device runtime configuration or selective port control are not yet implemented, leaving shutdown scheduling dependent on firmware updates or future model revisions.

The control and monitoring interface remains minimalistic, relying heavily on UniFi’s centralized GUI rather than onboard interaction. LEDs on the chassis provide a clear visual indication of status—covering power mode, adoption state, and battery level—but all deeper telemetry must be accessed through UniFi Network. Once paired, users can also configure email or push notifications for voltage irregularities, battery health alerts, and firmware updates. It is important to note that the current firmware does not support pure sine wave operation or lithium-ion battery upgrades, though UniFi has stated that future models will expand the portfolio to include these higher-end options. In its present form, the UPS-Tower and UPS-2U focus on stability, ease of deployment, and unified management within a single software environment, making them efficient for UniFi users seeking automation without added complexity.

The UniFi UPS-Tower UPS Review – Conclusion and Verdict

The UniFi UPS-Tower and UPS-2U represent the brand’s first foray into managed backup power systems, designed primarily to extend the reliability and consistency of the broader UniFi ecosystem. Both units share the same line-interactive architecture, simulated sine wave output, and Ethernet-based monitoring, offering a predictable and easily managed experience for users already invested in UniFi infrastructure. Their minimalist design, compact footprint, and seamless adoption through the UniFi Network Controller make them suitable for environments where simplicity, remote monitoring, and integration outweigh the need for advanced runtime management or pure sine wave output. For most small network or NAS setups, either model will provide adequate protection during short outages and brownouts, while ensuring systems are safely powered down when battery capacity is depleted.

However, their appeal remains closely tied to the UniFi ecosystem. The absence of USB connectivity, PoE passthrough, and lithium-ion battery options limits their usefulness in heterogeneous or high-performance environments. Users seeking pure sine wave support, longer runtimes, or advanced per-device control will likely need to wait for the next generation of UniFi UPS models, which the company has already suggested will expand to include these options. As they stand, the UPS-Tower and UPS-2U are well-built, tightly integrated, and cost-effective for UniFi users, but less compelling for those operating outside that ecosystem. They function precisely as intended: reliable, network-aware power backups for UniFi-managed systems, providing foundational stability rather than feature innovation.

UniFi UPS-Tower PROS

UniFi UPS-Tower CONS

Seamless integration with UniFi Network Controller for centralized management Compact and minimalistic design with low noise and stable thermal performance Ethernet-based control and monitoring eliminate the need for USB connectivity NUT compatibility enables basic third-party system integration User-replaceable lead-acid battery for extended product lifespan Competitive pricing relative to similar managed UPS devices Reliable short-term backup and safe shutdown coordination for UniFi devices

No USB port for direct communication with standalone servers or NAS systems Simulated sine wave output limits use with sensitive equipment Lacks PoE passthrough and per-device power control options

 

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

Review of the UGREEN NAS UPS – Is the US3000 120W UPS Any Good?

The UGREEN US3000 is a 120 W DC uninterruptible power supply developed specifically for UGREEN NAS devices that rely on an external DC power brick. Unlike conventional UPS systems that convert AC to DC, this model outputs direct 12 V DC power with a zero-second transfer time, ensuring there is no interruption during a power loss. It is equipped with a 12,000 mAh lithium-ion battery pack made up of four 3000 mAh cells, providing a rated energy of 43.2 Wh and up to around ten minutes of backup time depending on workload. Measuring 120.6 × 80.5 × 29.6 mm and weighing approximately 439 g, the US3000 is compact enough for desktop environments where space is limited. Beyond supplying short-term emergency power, it integrates with UGOS Pro software via a USB communication cable, allowing automated shutdown, timed standby, and restart once power is restored. This focus on seamless hardware and software compatibility makes the US3000 notable for users running UGREEN NAS systems that need to mitigate risks of data corruption caused by sudden outages.

UGREEN US3000 UPS Review – Quick Conclusion

The UGREEN US3000 is a purpose-built DC UPS that prioritizes seamless integration with UGREEN NAS systems over broad flexibility. Its compact aluminum chassis houses a 12,000 mAh lithium-ion battery pack capable of delivering 120 W output with zero-second transfer time, ensuring that a connected NAS continues running long enough to perform a safe shutdown. Unlike traditional AC-based UPS units, it avoids conversion inefficiency by supplying direct DC power, while its USB link with UGOS Pro enables automatic shutdown, timed standby, and restart functions. Testing confirmed reliable operation across scenarios from immediate power loss to scheduled shutdowns, with system logs capturing events in under two seconds. However, its design is deliberately narrow in scope: it supports only one NAS at a time, does not extend to routers or switches, and offers limited runtime of around ten minutes under load. For users operating within the UGREEN ecosystem, it provides an efficient and well-integrated safeguard against data corruption during outages. For those needing multi-device protection or long-duration backup, its constrained design and compatibility limit its broader applicability.

Check Amazon for the UGREEN US3000 UPS

Check AliExpress for the UGREEN US3000 UPS

Why the UGREEN US3000 UPS is Important/Interesting

Uninterruptible power supplies are not new, but most consumer models are designed for general computing and rely on bulky lead-acid batteries with AC pass-through. The UGREEN US3000 differs by offering a DC-to-DC solution that matches the external power design of UGREEN NAS units. This means it eliminates the inefficiency of double conversion and avoids the audible transfer delays that can occur with traditional UPS hardware. With a 120 W output ceiling, it is tailored for single-device use rather than multiple systems, but that specificity ensures closer integration with the NAS’s power and shutdown controls. From a technical perspective, its lithium-ion battery pack offers greater energy density than lead-acid, allowing the device to remain compact while still covering several minutes of safe system operation during an outage.

The importance of this UPS becomes clearer when examining how it interacts with UGOS Pro. Unlike generic solutions, the US3000 communicates directly with the NAS operating system via a USB connection, exposing monitoring and automation options in the control panel. Users can configure automatic shutdown after a set period, trigger standby to conserve remaining charge, or enable auto-restart once mains power returns. These features are not just convenient but directly address the risks of corrupted writes, incomplete backups, or damaged RAID arrays during sudden power loss. Given that UGREEN NAS systems are designed for small offices and home use, where environments may not include larger enterprise-grade UPS equipment, the US3000 effectively bridges that gap by offering a purpose-built, compact, and integrated safeguard.

UGREEN US3000 UPS Review – Design

The UGREEN US3000 follows a compact, rectangular form factor with dimensions of 120.6 mm in length, 80.5 mm in width, and 29.6 mm in thickness. Its weight of just under 440 g makes it relatively lightweight for a UPS, reflecting its focus on portability and single-device deployment rather than large-scale power protection. The outer chassis is made from anodized and sandblasted aluminum alloy, which gives it improved durability compared with plastic housings and also aids in passive heat dissipation. The choice of materials ensures a consistent finish that aligns visually with UGREEN’s NAS enclosures, providing an integrated appearance when the two devices are used together on a desktop.

Connectivity is handled entirely through DC and USB ports positioned on a single side of the device. The panel includes a DC input, a DC output, a USB-C port for data communication, and a power button. The fixed DC cable has a length of approximately 28 cm, while the included USB-A to USB-C cable measures around 53 cm, allowing flexible placement next to a NAS system without excess cabling. Each port and control is clearly labeled with printed icons, reducing the likelihood of incorrect setup. Unlike conventional UPS systems that feature multiple AC sockets, the US3000 focuses on a single dedicated output, reflecting its intended role as a companion unit for UGREEN NAS models rather than a general-purpose UPS.

The packaging of the device mirrors UGREEN’s approach with its NAS line, offering clear product imagery and specification highlights on the box exterior. Inside, the unit is provided with a base stand for stable positioning, the aforementioned data cable, and basic documentation. This is a minimalist package compared to conventional UPS units, which often include multiple adaptors or accessories, but the streamlined approach ensures that setup remains straightforward for the intended NAS integration. The inclusion of a stand is particularly useful given the slim design, as it helps keep the UPS stable in vertical placement while maintaining airflow around the chassis.

From a design perspective, the emphasis is on simplicity and integration rather than flexibility. The device does not feature multiple voltage outputs, nor does it support powering unrelated devices such as routers or switches. Instead, its DC pass-through design, small footprint, and single-device orientation mark it as a specialized tool. This aligns with UGREEN’s approach of building a controlled ecosystem around its NAS systems, where accessories are engineered for direct compatibility. The US3000 therefore sits between consumer-grade battery packs and enterprise UPS units, offering a focused solution that fits into a narrow but clearly defined usage scenario.

UGREEN US3000 UPS Review – Internal Power Design

Inside the UGREEN US3000 is a straightforward but carefully constructed layout built around a 12,000 mAh lithium-ion battery pack. The pack consists of four SunPower INR18650-3000 cells, each rated at 3000 mAh and 11.1 Wh, connected in series to deliver a combined rated energy of 43.2 Wh at 14.4 V. The cells are wrapped in foam insulation and secured with adhesive to minimize movement, with spot-welded nickel strips linking them. Additional barley paper insulation is applied around the terminals for added protection. This design choice allows the UPS to maintain compact dimensions while ensuring sufficient runtime for controlled NAS shutdowns.

Battery management is handled by a Chipsea CBM8580KV6NT protection IC. This chip monitors voltage, current, and temperature across the pack, ensuring safe charging and discharge cycles. It communicates with the system host via SMBus 3.1, which enables the UPS to relay real-time status to the NAS when connected through USB. Supporting components include current sense resistors, thermistors, and MOSFETs for switching and power regulation. Together, these ensure not only that the battery operates safely but also that the UPS can reliably deliver 120 W maximum output without voltage instability.

Voltage conversion is performed by a dual-stage arrangement. A Texas Instruments TPS55289 synchronous buck-boost converter handles a wide input range up to 30 V and can output between 0.8 V and 22 V. Alongside this, a SouthChip SC8002 synchronous buck controller manages current limiting and efficiency across dual channels. Power MOSFETs from CR MICRO and NCEPower are used for pass-through control and output switching, while a GigaDevice GD32F303RCT6 Cortex-M4 microcontroller coordinates the overall system, including communication with the NAS. Passive cooling, adhesive reinforcement on inductors and capacitors, and fuses at both input and battery ends further underline the design focus on stability and safety.

UGREEN US3000 UPS Review – Testing with UGREEN NASync Systems

To evaluate the UGREEN US3000, three operational scenarios were simulated: immediate power loss with continued operation, automatic shutdown under UPS control, and timed shutdown with automatic restart when power returned. In each case, the NAS was connected to the UPS using both the DC input and USB communication cable to ensure full integration with UGOS Pro. The first test involved disconnecting mains power to replicate an outage. The NAS continued running without interruption, with the transfer to battery occurring instantly. System logs registered the event in under two seconds, and normal file access, media playback, and downloads remained available until the battery level dropped to the configured threshold.

In the second test, the system was configured to shut down automatically as soon as the UPS switched to battery mode. Once power was removed, the NAS immediately began its shutdown process. This test showed that the UPS integration with UGOS Pro allowed a fast and orderly shutdown sequence, preventing data corruption or incomplete writes. The reaction time was near instantaneous, and the system was powered down safely without user intervention. This mode may be best suited for environments where uptime during an outage is less critical than ensuring rapid data protection.

A third test focused on timed shutdown, with the UPS set to keep the NAS running for five minutes before initiating a safe power-off. Once mains power was disconnected, the NAS continued operating for the specified period, then shut down as configured. After power was restored, the UPS automatically triggered a restart of the NAS, returning it to full operation within a few minutes. This confirmed the UPS’s ability not only to handle outages but also to manage recovery without manual restart, which is beneficial for users who may not be present during a power failure.

During all tests, the device’s limitations became apparent. With a 120 W maximum output and battery capacity limited to 43.2 Wh, it cannot sustain extended operation. Its role is restricted to ensuring controlled shutdowns and short bridging periods rather than providing long-term backup. Furthermore, it supports only one NAS system via DC pass-through, so it cannot protect additional hardware such as routers or switches. Nevertheless, within its defined parameters, the UPS consistently delivered seamless transitions and executed software-triggered events reliably, confirming that its functionality matches its intended scope.

UGREEN US3000 UPS Review – Conclusion & Verdict

The UGREEN US3000 fills a specific role: protecting UGREEN NAS devices from sudden power loss. Its design avoids the bulk and inefficiency of conventional AC-based UPS units by delivering DC pass-through power with zero transfer time. In practice, it provides just enough runtime for the NAS to perform a controlled shutdown, while its software integration ensures automation of both power-off and restart processes. With lithium-ion cells, a compact aluminum chassis, and close alignment with UGOS Pro features, it is engineered as a dedicated accessory rather than a universal power backup solution.

As a result, its usefulness is limited to scenarios where a single UGREEN NAS is the priority. It does not offer multiple outputs or extended backup duration, making it unsuitable for wider network coverage or enterprise requirements. Instead, the US3000 should be viewed as a narrowly focused safeguard that addresses one problem reliably: preventing data corruption and incomplete writes during outages. For users within the UGREEN ecosystem, it is an effective solution, but for broader applications, its scope remains intentionally constrained.

Check Amazon for the UGREEN US3000 UPS

Check AliExpress for the UGREEN US3000 UPS

PROs of the UGREEN US3000 UPS

CONs of the UGREEN US3000 UPS

Zero-second transfer time ensures uninterrupted NAS operation during outages. Compact and lightweight aluminum chassis with integrated heat dissipation. Direct DC pass-through eliminates inefficient AC/DC conversion. Full integration with UGOS Pro, including shutdown automation and restart control. Lithium-ion battery pack provides higher energy density than lead-acid designs. Purpose-built for UGREEN NAS systems with native USB communication support

Limited compatibility, works only with UGREEN NAS models that use external DC input. Short runtime and single-device capacity make it unsuitable for extended or multi-system protection.

 

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE