Synology (Finally) Reveals Managed PoE 10GbE Switches – The PS Series

At Computex 2025, Synology formally unveiled its new PS Series of PoE switches—marking the company’s first venture into dedicated network switching hardware. Designed specifically for surveillance environments, these switches are not meant to replace general-purpose managed switches, but rather to complement Synology’s Surveillance Station ecosystem. The lineup includes three models: the high-capacity PS2600+, the compact PS1000+, and the entry-level PS500. Each model is tailored for powering PoE cameras and streamlining IP surveillance setups, with features like centralized control through Surveillance Station and fanless operation. While this launch addresses a long-standing gap in Synology’s ecosystem, it is clear that these devices are intended for a niche surveillance role rather than enterprise-wide or enthusiast-grade switching solutions.

Why is a Synology Switch so Highly Demanded? And Why is This Not Quite What Everyone Wanted?

For years, users of Synology’s NAS and surveillance solutions have speculated about the company expanding into networking hardware, particularly switches. Given Synology’s existing ecosystem of NAS units, cameras, routers, and software like Surveillance Station and SRM, a managed PoE switch seemed like the logical next step to unify its offerings under a single, tightly integrated platform. Many envisioned a Synology switch that could serve not just surveillance but also general-purpose networking, VLAN management, and broader SMB/enterprise deployments—effectively competing with established names like Ubiquiti, Netgear, or QNAP.

However, the PS Series unveiled at Computex 2025 diverges from that expectation. The PS2600+ and PS1000+ are exclusively intended for use with Synology’s Surveillance Station, lacking broader Layer 3 management tools outside of this context. Meanwhile, the PS500 is a basic, unmanaged unit aimed more at simple deployments than network optimization. There are no bundled camera licenses, limited software extensibility, and no SRM integration. As a result, while these switches will likely appeal to users looking for a seamless Synology surveillance setup, they fall short of the more versatile, all-encompassing switch that many long-time Synology users were hoping for.

Synology PS2600+ 26 Port L2+ Managed PoE Switch

The PS2600+ is the flagship switch in Synology’s new lineup, featuring 24 PoE+ ports and 2 additional 10GbE SFP+ uplink ports. Designed for rackmount or desktop use, the PS2600+ is completely fanless, making it suitable for noise-sensitive environments. It delivers a total PoE power budget of 185W, allowing it to power multiple IP cameras, particularly in larger surveillance setups. It is fully managed and integrates directly with Synology’s Surveillance Station for centralized control, including power management, port diagnostics, and network topology mapping.

In terms of network performance, the PS2600+ offers a switching bandwidth of 88 Gbps and a forwarding rate of 65.47 Mpps. It supports Layer 2+ features, including inter-VLAN routing and DHCP server capabilities, allowing it to segment and route traffic in more complex surveillance deployments. However, its software integration is limited exclusively to Surveillance Station, and it lacks any compatibility with Synology’s SRM (Router OS) or general-purpose network management tools. It is best suited for installations where the switch, NAS, and cameras are all part of a single, unified Synology surveillance environment.

---

Synology PS500 5 Port Unmanaged PoE Switch

The PS500 is the most basic model in Synology’s PS Series and is designed primarily for entry-level surveillance setups. It offers a total of five ports, four of which support PoE+ for powering IP cameras or other devices. Unlike the other models, the PS500 is completely unmanaged—there is no software-based configuration, no VLAN support, and no integration with Surveillance Station CMS. It is intended for plug-and-play functionality, making it suitable for simple installations where centralized management is not required.

Despite its simplicity, the PS500 still delivers up to 60W of total PoE power and supports jumbo frames up to 9000 bytes. It is passively cooled and uses an external power supply, emphasizing its role as a compact, low-maintenance switch for desktop or wall-mounted deployments. While it doesn’t offer the flexibility or control of the PS2600+ or PS1000+, it fills a gap for users seeking a straightforward power delivery solution for small-scale IP camera installations.

---

Synology PS1000+ 10 Port L2+ Managed PoE Switch

The PS1000+ serves as the mid-range offering in Synology’s PS Series, targeting smaller surveillance deployments that still benefit from centralized management. It includes 8 PoE+ RJ45 ports and 2 standard 1GbE SFP ports for uplink or fiber connectivity. Like the PS2600+, this model is fanless and supports both rackmount and desktop installations. It offers a total PoE power budget of 65W, which is sufficient for a modest number of IP cameras or access points in home or SMB setups.

From a network performance standpoint, the PS1000+ provides 20 Gbps of switching bandwidth and a forwarding rate of 14.88 Mpps. It also supports VLANs, static routing, and DHCP services, and is managed entirely through Synology’s Surveillance Station interface. Its role is clearly focused—bridging NAS units and IP cameras under one platform, without offering broader Layer 3 functionality or third-party network integration. For users with Synology NAS-based NVR setups and fewer cameras, the PS1000+ provides a compact, low-noise, managed switch option.

---

Synology PS Series Switches, Conclusion and Verdict

Synology’s entry into the network switch market with the PS Series marks a significant, though narrowly focused, expansion of its surveillance ecosystem. These switches are clearly designed with Surveillance Station users in mind, offering streamlined power and network management for PoE camera deployments. While the PS2600+ and PS1000+ provide useful managed features for larger and mid-sized surveillance environments, and the PS500 delivers a simple plug-and-play option, none of these models address general networking needs outside of Synology’s surveillance scope. For those seeking a unified Synology environment for NVR deployments, these switches may be a welcome addition—but broader adoption will likely remain limited until Synology delivers more versatile, multi-role networking solutions.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE