A More Focused 4-Bay NAS From UGREEN – the DXP4800GT Review

UGREEN has moved quickly in the NAS market, and the DXP4800GT is one of the clearer examples of that. I first looked at this model when it appeared through UGREEN’s China-facing material, then again around Computex 2026 when it became clear that it was not going to remain a China-only product. Now, having tested the retail hardware properly, the DXP4800GT feels less like a minor variation of the DXP4800 range and more like a separate performance-focused branch of it. It still has the familiar 4-bay desktop NAS layout, but the AMD processor, dual 10GbE networking, U.2 support, ECC memory compatibility, and different approach to system storage make it stand apart from the Intel-based models already in UGREEN’s lineup.

The important thing is that this is not a NAS I would describe as universally better for everyone. It is more specific than that. The DXP4800GT is aimed at users who want faster networking, more internal storage flexibility, heavier multitasking options, and a bit more room to grow than a typical 4-bay home NAS. At the same time, some of the choices UGREEN has made, especially the 64GB eMMC system storage and the fact that ECC memory is supported but not included, make it a product that needs a more careful look before buying. On paper, it is one of UGREEN’s most interesting desktop NAS systems so far; in practice, the appeal depends heavily on whether its particular strengths match what you actually need from a NAS.

UGREEN DXP4800GT NAS Review – Quick Conclusion

The UGREEN DXP4800GT is a more specialised and performance-focused 4-bay NAS than the standard DXP4800 range. Its strongest points are the AMD Ryzen Embedded processor, dual 10GbE networking, U.2 support, ECC memory compatibility, 64GB memory ceiling, strong SSD performance, useful creator ports, and a very solid metal chassis. It is well suited to creators, homelab users, small teams, and anyone who wants faster networking and more internal flexibility than a typical 4-bay NAS. The main downsides are worth noting before buying. The 64GB eMMC system storage makes third-party OS installation less straightforward, ECC memory is supported but not included, and power use is higher than lighter Intel-based 4-bay alternatives. UGOS Pro is also improving quickly, but it is still not as mature as Synology DSM, QNAP QTS/QuTS, or TrueNAS for more advanced users. Overall, the DXP4800GT is not the safest generic NAS choice for everyone, but it is one of UGREEN’s most interesting desktop NAS systems so far. If you want dual 10GbE, AMD hardware, U.2 potential, and a modern 4-bay NAS that feels genuinely different from the usual options, this is a very strong release.

IMPORTANT – Use the code ‘DXP4800GT2’ when buying the 4-Bay model and ‘2800GTOFF3’ on the 2-Bay model to get an additional discount on UGREEN’s store

Buy the UGREEN DXP4800GT on Amazon	Buy the UGREEN DXP4800GT on UGREEN.COM	Buy the UGREEN DXP4800GT on B&H
	STORE

UGREEN DXP4800GT NAS Review – Design & Storage

The DXP4800GT keeps the same general desktop NAS shape as UGREEN’s other 4-bay systems, but the presentation is noticeably different. The black and rose-gold finish makes it stand out more than most NAS devices, which are usually designed to disappear into the background. That does not change how the NAS performs, but it does matter if the system is going to sit on a desk, in a studio, or somewhere visible rather than being hidden in a cupboard. I still think most NAS buyers should care more about cooling, noise, drive access, and maintenance than colour, but this is one of the few desktop NAS designs that feels deliberately styled rather than simply functional.

The main enclosure remains metal all the way around, which gives the DXP4800GT a more solid feel than a lighter plastic-bodied NAS. UGREEN also keeps the removable mesh panel at the rear, which is useful for cleaning and basic maintenance because dust buildup around the rear airflow path can affect cooling over time. The chassis is still compact enough to sit in a normal home or office setup, but it does not feel like a budget enclosure. The design is not just about appearance; it also gives the system a more rigid structure, which is useful when running larger mechanical hard drives that can introduce vibration.

The 4 main storage bays are front-mounted, so drive access is straightforward. This is important for anyone who expects to add drives later, replace a failed drive, or test different storage configurations. The trays support the usual NAS role of holding larger 3.5-inch hard drives, but the interesting detail is what sits behind them. The internal backplane supports SATA, SAS-style physical connectivity, and U.2 storage support, giving the system more flexibility than a basic SATA-only 4-bay NAS. I was not able to test U.2 drives directly during this review, but the physical and platform support makes this one of the more unusual parts of the DXP4800GT’s design.

Access to the M.2 and memory area is handled through the base of the NAS. Underneath, there are 2 M.2 NVMe slots and 2 SODIMM memory slots, so upgrades do not require dismantling the whole unit. This layout is practical, and it keeps the faster flash storage and RAM separate from the main front drive bays. The M.2 slots are useful for SSD storage pools or caching, but it is worth remembering that they are connected over PCIe Gen 3 x2, which affects the top-end performance available from each SSD.

That does not make them pointless, but it does mean they are not being used as full-speed Gen 4 NVMe slots.

The one design decision I am less comfortable with is the 64GB eMMC system storage. Previous UGREEN NAS systems often used a small replaceable SSD-style module for the operating system, which made third-party OS installation more straightforward. On the DXP4800GT, the operating system sits on eMMC, and I could not see it presented in the BIOS in the same way as the main storage drives during testing. For users who plan to stay with UGOS, this may not matter much. For users who are buying UGREEN hardware specifically to install TrueNAS, Unraid, OpenMediaVault, or another third-party platform, it makes the decision more complicated and gives the built-in software a larger role in the overall value of the product.

UGREEN DXP4800GT NAS Review – Ports and Connectivity

The DXP4800GT has a stronger external connection layout than most 4-bay desktop NAS systems, and the main reason is the inclusion of 2 10GbE ports on the rear. This is one of the clearest hardware differences between this model and the more conventional UGREEN DXP4800 systems. For users moving large video files, working with shared project folders, or connecting a workstation directly to the NAS, dual 10GbE gives the system a much higher ceiling than a 2.5GbE-only NAS. That said, the network ports do not automatically mean every storage configuration will saturate them. The drives, RAID type, SSD use, client system, and cabling all still matter.

The rear of the NAS also includes HDMI and USB connectivity, which gives the DXP4800GT more flexibility than a file-server-only appliance. HDMI output is useful because the system has AMD integrated graphics, and UGREEN also provides a dedicated HDMI portal application for local display use. This will not matter to every user, especially those who manage everything from a browser or mobile app, but it does make the system more versatile for media playback, local management, or a living-room-adjacent setup. It is also worth noting that this still depends on what UGOS allows users to do with that HDMI output in practice.

Around the front, the system includes USB Type-C and an SD card slot, which are both practical additions for creators. The SD card slot is particularly useful if the NAS is being used as a central storage location for photos or video footage, because it gives users a quick way to ingest media without needing another reader hanging off the system. The front-mounted USB-C port is also convenient for external drives, quick transfers, or temporary devices. These are not headline features in the same way as dual 10GbE, but they do make a difference in day-to-day use, especially if the NAS sits somewhere easy to reach.

The main limitation is that the external bandwidth is ahead of what every internal storage setup can realistically deliver. In my testing, the 2 M.2 slots were connected over PCIe Gen 3 x2, and even in RAID 0 they topped out well below the combined ceiling of the 2 10GbE ports. With SATA SSDs, performance was good for a 4-bay desktop system, but again not enough to fully stretch both 10GbE links in every scenario. This does not make the ports wasted, because they still help with multi-user access, direct-attached 10GbE setups, and separate workloads, but buyers should not assume that dual 10GbE means 20GbE-class storage throughput from any drive configuration.

UGREEN DXP4800GT NAS Review – Internal Hardware

Inside the DXP4800GT, the main hardware change is the move to AMD. The system uses an AMD Ryzen Embedded R2514 processor, which is a 4-core, 8-thread CPU with integrated Radeon Vega graphics. This gives the NAS a different profile from UGREEN’s Intel-based 4-bay models, especially for users who care about multitasking, containers, virtual machines, and internal storage flexibility. In raw CPU ranking terms, this is not automatically above every Intel option in UGREEN’s range, but that is not really the point of this model. The DXP4800GT is more about ECC support, U.2 capability, dual 10GbE, and the internal throughput advantages of this AMD-based platform.

The system arrives with DDR4 SODIMM memory, and my review unit came with 8GB installed. One slightly odd detail is that the installed memory module was rated at 3200 MT/s, while the official platform specification points to 2666 MT/s support. That does not mean the NAS runs at the higher speed, but it is worth noting because the memory configuration is not as simple as just reading the label on the module. The system has 2 SODIMM slots and supports up to 64GB, which gives it a good amount of headroom for heavier workloads. However, anyone planning a memory upgrade should be careful about buying suitable modules rather than assuming all laptop DDR4 memory will behave the same way in a NAS.

ECC memory support is one of the more important hardware points here, but it needs to be described properly. The AMD Ryzen Embedded R2514 platform supports ECC, and UGREEN also lists ECC support for this NAS. In my testing, the system recognised ECC memory when installed, but the memory included with the system is not ECC. That means buyers should not assume they are getting ECC protection out of the box. If ECC matters for your workload, especially if you are using the NAS for business storage, heavier virtualisation, or long-term data handling, you need to factor in the cost of replacing the included memory with compatible ECC modules.

The internal storage layout is also slightly more specialised than the usual 4-bay NAS formula. The 4 front bays support SATA drives, but the backplane also provides support for U.2-style storage, which is uncommon in this class. I was able to test SATA SSDs and M.2 NVMe storage, but I did not have U.2 drives available for the initial review, so that part still needs follow-up testing. The 2 M.2 NVMe slots are useful, but they run over PCIe Gen 3 x2, which limits their maximum per-drive speed compared with higher-lane NVMe implementations. Combined with the 64GB eMMC OS storage, the DXP4800GT is a powerful but more curated hardware design than earlier UGREEN NAS systems, especially for users who normally buy these boxes with third-party OS installation in mind.

UGREEN DXP4800GT NAS Review – UGOS NAS Software

The DXP4800GT runs UGOS Pro, and in general use the software experience is broadly the same as UGREEN’s other x86 NAS systems. That is not a bad thing, because UGOS has improved a lot since UGREEN first entered the NAS space, and the basic user experience is now quite approachable for newer users. File management, shared folders, user permissions, mobile access, browser-based administration, storage pool creation, snapshots, scheduled power control, cloud backup, local backup, SMB access, and app installation are all handled in a way that feels fairly easy to follow. It is still not as mature as the longest-established NAS operating systems, but it is much more complete than many newer NAS platforms.

The main software features are what most users would expect from a modern NAS. UGOS Pro includes a native file manager, mobile app access, AI photo handling, dedicated multimedia applications, iSCSI support, 2FA, network controls, container support, virtual machines, SSD caching, SSD storage pools, and multi-site backup tools. The AI side of the platform is also becoming more visible, with photo recognition, AI-linked tools, and a dedicated AI portal for managing supported AI functions. For home users and small teams, this makes the NAS feel less like a bare storage appliance and more like a central data box that can also handle media, backup, containers, and photo organisation.

There are still some gaps, and they matter more on this model than they might on some earlier UGREEN NAS systems. At the time of testing, there is still no surveillance application, no WORM support, and no encrypted storage pools. The security scanner also remains fairly limited, because it focuses more on malware and virus checking than on broader NAS security hygiene. I would like to see it flag weak passwords, overpowered admin accounts, risky permissions, exposed services, and other configuration issues that often matter more in real NAS deployments. Those tools can be configured manually in different areas of the system, but I would prefer UGOS to bring them together in a clearer security audit feature.

The reason the software is especially important on the DXP4800GT is the 64GB eMMC operating system storage. On previous UGREEN NAS models, replacing or bypassing the original OS drive was more straightforward, which made the hardware attractive to people who wanted to install TrueNAS, Unraid, OpenMediaVault, ZimaOS, or another third-party platform. With this model, the eMMC approach makes that route less clean. It may still be possible, but it is not as simple or risk-free as swapping out a small SSD module. Because of that, UGOS Pro is not just a bundled extra here. It is a bigger part of the value proposition, and buyers should be more certain they are happy with UGREEN’s software direction before choosing the DXP4800GT.

UGREEN DXP4800GT NAS Review -Noise, Heat, Power Use and Performance Tests

In storage testing, the DXP4800GT performed well, but it also showed why the internal storage configuration matters when judging those 2 rear 10GbE ports. With 4 SATA SSDs installed, I saw read performance around 1.3GB/s and write performance generally between 600MB/s and 700MB/s, rising closer to 1GB/s after changing block size settings. That is strong for a 4-bay desktop NAS, but it also shows that SATA storage alone is not always going to fully stretch both 10GbE ports at the same time. With 2 M.2 NVMe SSDs in RAID 0, I saw read performance just above 1.45GB/s and write performance around 1.1GB/s, which lines up with the PCIe Gen 3 x2 limitation on those M.2 slots. The system is fast, but buyers should not assume that dual 10GbE means every storage pool will deliver full dual-port saturation.

Power consumption is higher than a more modest 4-bay Intel NAS, but that is not unexpected given the AMD Ryzen Embedded platform, dual 10GbE, and wider storage support. With the main hard drive bays empty and only the 2 M.2 SSDs plus the OS drive active, I measured the system at around 25W idle. With 4 large hard drives installed, alongside the 2 M.2 SSDs, the unit sat around 45W with the CPU only lightly loaded. Under heavier testing, including multimedia activity, indexing, drive access, and CPU load, I saw peak power draw around 70W to 77W. That puts it above what I would normally expect from UGREEN’s lighter Intel-based 4-bay systems, so electricity use is one of the trade-offs of choosing this more capable hardware platform.

Noise levels were generally reasonable for a metal desktop NAS, especially considering I tested it with larger 24TB and 30TB hard drives. At idle, the unit sat around 36dBA to 38dBA, which is respectable for this type of enclosure and drive configuration. With SSDs, the number dropped by around 2dBA to 3dBA, but around 38dBA is effectively the floor I saw for this chassis during testing. When the fan was set to maximum, noise rose to around 45dBA to 50dBA from the front and about 50dBA from the rear, making the fan louder than the drives themselves. During active read and write activity with larger hard drives, the system again sat around 45dBA to 50dBA, though smaller 4TB to 8TB drives would likely reduce that by several dBA.

Thermal behaviour did not raise any major concerns in testing, but it is tied closely to the fan profile and the type of drives used. The chassis uses the same broad design language as earlier UGREEN 4-bay systems, but this model has a more demanding network and storage profile, so airflow matters more. The large rear fan, removable mesh panel, and metal enclosure help keep the system controlled, although pushing the fan to high clearly increases the acoustic footprint. In practical use, I would leave the fan on automatic unless the NAS is being used in a warmer room or with high-capacity hard drives under sustained load. The DXP4800GT has enough performance potential to justify a more careful setup than a simple backup NAS, especially if it is being used with SSD pools, U.2 storage, or heavier container and media workloads.

UGREEN DXP4800GT NAS Review – Verdict and Conclusion

The UGREEN DXP4800GT is not simply a faster version of the existing DXP4800. After testing it, I would describe it as a more specialised 4-bay NAS that makes the most sense for users who specifically want the combination of AMD Ryzen Embedded hardware, dual 10GbE, U.2 support, ECC memory compatibility, front-accessible creator ports, and a more distinctive metal chassis. The positives are clear: it is well built, visually different without being impractical, offers stronger networking than most 4-bay NAS systems in this class, and gives users more internal storage flexibility than a standard SATA-only design. The performance numbers are also good for a compact desktop NAS, especially when using SSDs, and the system has enough hardware headroom for Docker, virtual machines, media handling, photo management, and heavier file sharing duties. However, it is also not the obvious choice for every buyer. The 64GB eMMC system storage makes third-party OS use less straightforward than on previous UGREEN NAS models, ECC memory is supported but not included, power use is higher than lighter Intel-based 4-bay systems, and the dual 10GbE ports need the right storage configuration before they can be fully exploited.

For users who plan to stay inside UGOS Pro and want a compact NAS with stronger networking, flexible storage options, and more room for heavier workloads, the DXP4800GT is a strong addition to UGREEN’s NAS range. It is especially interesting for creators, homelab users, and small teams who can make use of the faster ports, SD card access, HDMI output, M.2 storage, and expanded memory support. For existing DXP4800 Plus or DXP4800 Pro owners, I would not treat it as an automatic upgrade unless ECC support, U.2, or dual 10GbE are genuinely needed. The software is also part of the decision now, because the eMMC system drive means UGOS Pro matters more to the overall package than it did on some earlier UGREEN systems. Even with those caveats, I think the DXP4800GT is a positive step for UGREEN. It shows the brand is willing to experiment with different NAS hardware platforms, target more demanding users, and offer something more distinctive than a routine 4-bay refresh. It is a NAS with some clear trade-offs, but it is also one of the more interesting and capable desktop systems UGREEN has released so far.

IMPORTANT – Use the code ‘DXP4800GT2’ when buying the 4-Bay model and ‘2800GTOFF3’ on the 2-Bay model to get an additional discount on UGREEN’s store

Buy the UGREEN DXP4800GT on Amazon	Buy the UGREEN DXP4800GT on UGREEN.COM	Buy the UGREEN DXP4800GT on B&H
	STORE

PROs of the DXP4800GT NAS	CONs of the DXP4800GT NAS
Strong AMD Ryzen CPU for heavier multitasking Dual 10GbE ports for faster networking U.2 support adds storage flexibility ECC memory support for better reliability Memory expandable up to 64GB Good SSD performance for compact NAS Front USB-C and SD card access Premium metal chassis and distinctive design UGOS Pro covers most core NAS tasks	eMMC makes third-party OS installs harder ECC support requires separate memory upgrade Higher power use than lighter alternatives Software Still not ‘complete’ (Large-scale security scanner, WORM Support, encrypted Layers, etc)

 

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

UGREEN’s AMD 4-Bay NAS Goes Global

At Computex 2026, UGREEN revealed the DXP4800GT, a new 4-bay NAS that takes the company’s desktop NAS lineup in a different direction from the Intel-powered DXP models already on the market. I first discussed this NAS a week ago when it appeared through UGREEN’s China-facing material, and at the time the obvious question was whether it would remain a China-only release. Having now seen it at the UGREEN stand in Taipei, I am pleased to see that this model is intended for wider availability, including both the US and Europe.

The DXP4800GT is not just another small update to the existing DXP4800 range. It moves to an AMD Ryzen Embedded R2514 processor, adds dual 10GbE networking, keeps the 4-bay desktop form factor, and includes several features that make it more appealing to creators, small teams, and heavier home users. I would still describe it as a NAS first, rather than a mini PC with drive bays, but the hardware layout clearly gives it more room for Docker, virtual machines, faster local transfers, media handling, and heavier multi-user workloads than a basic entry-level NAS.

A Desktop NAS Chassis with More Storage Flexibility

The DXP4800GT keeps the familiar 4-bay desktop NAS layout, but UGREEN has given this model a more distinctive chassis than many systems in this class. The official material describes an aerospace-grade aluminium casing, a 3.5mm thickened metal body, a through-flow internal cooling structure, and a 14cm silent hydraulic fan. There is also a child lock on the drive trays, which is a small but practical feature if the NAS is being used in a shared office, studio, or family environment rather than locked away in a cupboard. The version shown in the launch material uses a black and rose-gold style finish, which also helps separate it visually from the standard DXP4800 models.

For storage, the DXP4800GT combines 4 SATA bays, 2 M.2 NVMe slots, and 64GB of eMMC flash storage listed for the system. The main SATA bays support 2.5-inch and 3.5-inch drives, with UGREEN listing up to 32TB per bay, giving the 4 main bays a maximum of 128TB. The 2 M.2 2280 NVMe slots are listed at up to 8TB each, taking the advertised total supported capacity to 144TB. UGREEN also refers to U.2 expansion support through the main drive bays, which is one of the more interesting details, although I would still want to verify the exact implementation, supported drive types, and bandwidth behaviour in proper testing before treating that as a fully understood feature.

AMD Hardware, ECC Potential, and Dual 10GbE

Inside the DXP4800GT is an AMD Ryzen Embedded R2514 processor. This is a 4-core, 8-thread x86 CPU with a listed clock range of 2.1GHz to 3.7GHz, and it includes Radeon Vega 8 integrated graphics. That makes it a different kind of NAS from the Intel N100-based DXP4800, particularly for users who care about running several services at the same time. UGREEN’s own material claims a 20.6% multi-core performance improvement over the DXP4800 and highlights the move from 4 threads to 8 threads, though I would still treat those as vendor figures until I can test the system independently.

The memory configuration is also worth noting. The DXP4800GT is listed with either 8GB or 16GB of DDR4 memory as standard, with 2 memory slots and support for up to 64GB at 2666 MT/s. UGREEN also states that ECC memory is supported, but there is an important detail in the product material: the included memory does not support ECC, and users need to replace it with compatible ECC memory to enable that function. That distinction matters, because a NAS being ECC-capable is not the same thing as shipping with ECC active out of the box.

Networking is one of the clearest areas where the GT model steps up. The DXP4800GT includes 2 10GbE ports, while UGREEN’s existing DXP4800 Plus uses a 10GbE plus 2.5GbE layout, and the standard DXP4800 uses dual 2.5GbE. UGREEN’s own material also refers to aggregation and bridge modes, with the bridge option allowing a 10GbE device to connect directly through the NAS without necessarily needing a dedicated 10GbE switch. In practice, actual speeds will still depend on the drives, RAID configuration, SSD use, network setup, cables, and client hardware, but dual 10GbE is a strong baseline for a 4-bay system.

The external ports are also fairly complete. The front of the DXP4800GT includes 1 USB 3.2 Gen 2 Type-A port, 1 USB-C Gen 2 port, and an SD 3.0 card slot. Around the rear, there is 1 USB 3.2 Gen 1 port, 2 USB 2.0 ports, HDMI 2.0b with support for up to 4K at 60Hz, and the 2 10GbE ports. For creators, the SD card slot and faster networking are the most obvious practical benefits, because they make it easier to ingest camera media and then work from centralised storage across a fast local network.

UGOS Pro, AI Features, and Everyday NAS Use

UGREEN is presenting the DXP4800GT as a system for more than basic file storage. Its official material highlights UGOS Pro support for Docker, virtual machines, photo management, semantic image search, media library tools, cloud storage mounting, Time Machine backup, snapshots, RAID, 2FA, encrypted remote access, firewall controls, and fine-grained permissions. These are all useful features on paper, but I would separate the mature NAS basics from the newer AI-driven tools, because the latter need more real-world testing before they can be judged properly.

The photo and media features are clearly part of how UGREEN wants to position this model. The official material refers to semantic image search, people recognition, text recognition, duplicate photo recognition, pet recognition, sensitive content identification, and AI-assisted media organisation. For newer NAS users, the appeal is easy to understand: instead of just storing a large photo archive, the NAS is supposed to help make that archive easier to browse and search. My main question is not whether these features sound useful, but how consistently they work, how much local processing is involved, and how well UGOS Pro presents them to users who do not want to spend time tuning a server.

DXP4800GT vs DXP4800 Plus vs DXP4800

The DXP4800GT sits in an interesting place against the existing DXP4800 and DXP4800 Plus. The standard DXP4800 uses an Intel N100 processor and dual 2.5GbE, so it is the more mainstream option for users who want a 4-bay NAS for backup, media storage, and lighter home use. The DXP4800 Plus steps up to an Intel Pentium Gold 8505 processor, DDR5 memory, and a 10GbE plus 2.5GbE network layout, making it better suited to faster file transfers and heavier multitasking. The DXP4800GT changes the formula again by using an AMD Ryzen Embedded R2514 with 4 cores and 8 threads, DDR4 memory, ECC upgrade support, and dual 10GbE.

On CPU ability, the comparison is not as simple as newer always being better in every way. The Intel N100 in the DXP4800 is efficient and well suited to lighter NAS duties, while the Pentium Gold 8505 in the DXP4800 Plus offers a stronger mixed-core Intel platform for more demanding desktop NAS use. The Ryzen Embedded R2514 in the DXP4800GT brings 8 threads, ECC memory potential, and Radeon Vega 8 integrated graphics, which gives it a different profile again. For users focused on multitasking, virtual machines, Docker, direct 10GbE use, and longer-term service workloads, the GT model looks like the more specialised performance NAS. For users focused on lower cost or simpler home storage, the standard DXP4800 or DXP4800 Plus may still make more sense.

Alternatively, you can also make comparisons between the DXP4800 Pro too – a NAS released around 3-4 months ago that features a near identical hardware configuration to the DXP4800 PLUS, but arrives with an Intel i3 Processor. Here is how those processors compare below:

US and Europe Release Plans

The DXP4800GT is not being treated as a China-only NAS. UGREEN has confirmed to me that the model is being revealed at Computex 2026 and is planned for release in both the US and Europe in Q2 2026. In practical terms, that points to a likely mid-to-late June 2026 release window, assuming the final retail schedule does not slip. That matters because when this model first appeared through Chinese product material, the obvious uncertainty was whether this AMD-based version would be sold internationally at all.

DXP4800GT Price and Launch Position

UGREEN has indicated that the DXP4800GT will launch in the $600 to $700 range, with a launch special price likely. That places it above a basic 4-bay NAS, but the hardware package is also stronger than a basic 4-bay system, especially with the AMD Ryzen Embedded R2514, dual 10GbE, 2 M.2 NVMe slots, 64GB eMMC system storage, HDMI, SD card access, and support for up to 64GB of memory. The final value judgement will depend on the confirmed retail price, the included memory configuration, regional warranty details, and how mature UGOS Pro feels on this AMD hardware at launch. Based on the specification and the newly confirmed global release plan, the DXP4800GT is now more than an interesting China-market reveal. It is one of UGREEN’s key NAS launches for mid-2026.

Look for the UGREEN DXP4800GT on Amazon	Check the Official UGREEN Store for the DXP4800GT on UGREEN.COM	Buy a UGREEN NAS on B&H
	STORE

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

A New AMD Direction for UGREEN NAS – the DXP4800GT NAS

The UGREEN DXP4800 GT is a newly revealed 4-bay NAS that, at least for now, appears to be aimed at the Chinese market. It sits in the same broad family as UGREEN’s existing DXP4800 systems, but it takes the hardware in a different direction by moving away from the Intel processors used in much of the current NASync range and instead using an AMD Ryzen Embedded R2514 platform. That matters because this is not just a slightly adjusted version of the earlier DXP4800, but a model that appears to be built around higher network throughput, stronger multi-threaded performance, and a more capable internal hardware layout. For users who have been watching UGREEN’s NAS range develop over the last year, this feels like a separate branch of the product line rather than a simple replacement.

I would not look at the DXP4800 GT as just another 4-bay storage box with a new colour scheme. The early specifications point toward a more performance-focused NAS, with dual 10GbE, 4 SATA bays, 2 M.2 NVMe slots, ECC memory support through compatible upgrades, and 64GB of eMMC system storage listed in the official specifications. It also appears to be aimed at users who want more than basic backup duties, including media handling, Docker, virtual machines, photo management, and faster direct network access. That does not automatically make it the right NAS for everyone, and there are still details that need confirming, especially around wider availability, final pricing, and how flexible the system will be for users who want to experiment with software. However, based on what has been shown so far, it is clearly a model worth separating from the standard DXP4800 line.

UGREEN DXP4800GT NAS – Design and Storage

The DXP4800 GT keeps to a 4-bay desktop NAS layout, but UGREEN appears to be putting more emphasis on the physical design than just the internal specification sheet. The official material describes an aerospace-grade aluminium casing, with a thicker metal body, a large 14cm fan, and a through-flow internal cooling design. There is also a child lock on the hard drive trays, which is a small detail, but useful if the NAS is going to sit somewhere accessible rather than hidden away in a network cabinet. The model shown in the launch material also uses a black and rose-gold style finish, which is more visually distinctive than most 4-bay NAS systems, although final regional colour options have not been confirmed.

On the storage side, the DXP4800 GT is not just relying on its 4 main SATA bays. Each bay supports 2.5-inch and 3.5-inch SATA drives, with the official specification listing up to 32TB per bay, giving the system a stated SATA capacity of 128TB before the M.2 slots are included. The NAS also has 2 M.2 NVMe 2280 slots, with up to 8TB per slot listed, bringing the total advertised maximum to 144TB. One of the more interesting details from the official product text is the mention of U.2 expansion support through the main drive bays, which could make the system more flexible for users who want higher-performance SSD storage, though the exact implementation and limitations still need proper confirmation in testing.

UGREEN DXP4800GT – Internal Hardware and External Connectivity

Inside the DXP4800 GT, the main change is the move to an AMD Ryzen Embedded R2514 processor. This is a 4-core, 8-thread x86 CPU with a listed frequency range of 2.1GHz to 3.7GHz, and it also includes Radeon Vega 8 integrated graphics. That makes it quite different from the Intel N100 used in the standard DXP4800, especially for users who care about heavier multitasking, virtual machines, Docker containers, and services running at the same time. UGREEN’s own comparison material claims a multi-core performance uplift over the DXP4800, though I would treat that as a useful early indicator rather than a replacement for independent testing.

Memory is another area where the DXP4800 GT looks more flexible than a basic home NAS. The official specifications list 8GB or 16GB of DDR4 memory as standard, with 2 memory slots and support for up to 64GB at 2666 MT/s. The product material also states that the platform supports ECC memory, but the included memory does not support ECC, so users would need to replace it with compatible ECC modules to use that feature. That distinction matters, because ECC support is often mentioned loosely in NAS marketing, but whether the system actually ships with ECC memory is a separate point.Note – it appears on the official China sales page that the DXP4800GT is shipping by default with either 8GB or 16GB of DDR4 3200MT/s RAM, but not not ECC RAM. It IS supported, but needs to be purchased seperately.

Networking is one of the clearest hardware upgrades. The DXP4800 GT includes 2 10GbE ports rather than the 2.5GbE ports found on the earlier DXP4800 model, and UGREEN’s material refers to aggregation and bridge modes for different network setups. For a 4-bay NAS, dual 10GbE is a strong specification, especially for users moving large video projects, working from SSD storage, or connecting directly to a 10GbE workstation without immediately needing a switch. Of course, the actual speeds will still depend on the drives used, the RAID configuration, the client device, and the rest of the network, so the ports alone do not guarantee 10Gb/s file transfers in every setup.

The external ports are also fairly broad for a desktop NAS. The front includes 1 USB 3.2 Gen 2 Type-A port, 1 USB-C Gen 2 port, and an SD 3.0 card reader, while the rear includes 1 USB 3.2 Gen 1 port, 2 USB 2.0 ports, HDMI 2.0b with support for up to 4K at 60Hz, and the 2 10GbE network ports. The SD card slot is particularly relevant for photographers and video creators who want quick ingest after a shoot, while HDMI gives the system more flexibility for direct display use or local media output, depending on how UGREEN enables it in UGOS Pro. The listed 64GB of flash storage also suggests the operating system has its own onboard space, though I would still want to confirm how accessible or replaceable that storage is before drawing conclusions about third-party OS use.

Elephant in the room – DXP4800GT is China Only …for now?

For now, the DXP4800 GT appears to be a China-first product rather than a confirmed global release. The official material and early product information are focused on the Chinese UGREEN NAS site, and there has not yet been a clear international launch date, regional price, or confirmed global SKU. That is worth keeping in mind, because UGREEN’s NAS lineup can differ by region, and features shown in Chinese launch material do not always arrive in exactly the same form elsewhere. I would not assume the final global version, if it appears, will be identical in colour, bundled memory, app support, or software services.

That said, I would be surprised if this hardware platform remained China-only forever. The DXP4800 GT uses a noticeably different AMD-based architecture from the Intel-powered DXP models already sold more widely, and it includes features that would make sense for a broader prosumer NAS audience, especially dual 10GbE, higher memory support, ECC upgrade potential, and a more performance-focused storage layout. The more realistic question is not whether the hardware is interesting enough for wider release, but whether UGREEN chooses to bring this exact model outside China or uses the same platform as the basis for a later international NAS. Until that is confirmed, it should be treated as a revealed product rather than a globally available one.

An Early Verdict on the DXP4800 GT

The UGREEN DXP4800 GT looks like a more serious 4-bay NAS than the standard DXP4800, mainly because it combines an AMD Ryzen Embedded R2514 processor, dual 10GbE, expandable DDR4 memory, 2 M.2 NVMe slots, HDMI, SD card access, and a higher-end chassis design in a single desktop system. From the information currently available, I would treat it as a NAS aimed more at creators, heavier home users, homelab users, and small teams than someone who only wants basic file backup. The remaining unknowns are important, especially global availability, price, third-party OS flexibility, and real-world thermal and network performance. Until those are confirmed, this is best viewed as a promising hardware reveal rather than a finished recommendation, but it is still one of the more interesting UGREEN NAS models shown so far.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE