What is the Gl.iNet Comet Q KVM?

The Gl.iNet Comet Q is a compact KVM-over-IP device built around a different kind of deployment than most existing entries in this category. Instead of focusing on HDMI-connected desktops, servers, or rack hardware, the Comet Q is designed around a direct USB-C connection, allowing it to interface with smartphones, tablets, laptops, and other compatible host devices through a single pre-attached cable. Alongside local access, it also integrates WiFi-based networking, remote internet control, a built-in touchscreen, and USB-C pass-through for power delivery to the connected device. Based on the early demonstration shown during a visit to Gl.iNet in Shenzhen, the Comet Q appears to be aimed at portable remote access, field support, and off-site troubleshooting, while also expanding the wider Comet KVM range into a more mobile and lower-power form factor.

Interested in Gl.iNet KVM Devices? Here are some great options available NOW: Gl.iNet Comet Pro $179 – HERE on Amazon Gl.iNet Comet 5G $299 – HERE on Amazon Gl.iNet Comet PoE $129 – HERE on Amazon

Gl.iNet Comet Q Hardware Specifications

The Gl.iNet Comet Q is built around a notably smaller hardware platform than the rest of the Comet KVM family. According to the specification sheet provided, it uses a dual-core ARM Cortex-A53 processor, paired with 512MB of LPDDR4 memory and 64GB of onboard storage. This places it below the Comet, Comet PoE, Comet Pro, and Comet 5G in raw system resources, but that appears consistent with its intended role as a highly compact USB-C based access device rather than a more traditional full-size KVM endpoint.

In terms of connectivity, the Comet Q differs significantly from the rest of the range. Rather than relying on HDMI input, it uses a USB-C connection with DisplayPort Alt Mode support for video input. This is the key functional distinction in the lineup, as it allows the device to connect directly to supported modern phones, tablets, and laptops without requiring a separate HDMI capture path. The copied specifications also indicate USB 2.0 Type-A and Type-C connectivity, alongside 1 x RJ45 Gigabit Ethernet port.

Wireless support is also listed as part of the Comet Q feature set. The specification sheet references 802.11a/b/g/n/ac/ax support, with 2.4GHz and 5GHz operation included across the lineup. Although the pasted table is clearly the result of OCR and contains some formatting inconsistencies, the Comet Q is positioned as a wireless-enabled KVM device rather than a purely wired one, which aligns with the functionality shown in the demonstration. This is important because the device is intended to support both local network access and wider remote access scenarios.

Power and physical design are clearly central to the Comet Q hardware profile. It is rated for Type-C power input at 5V/2A, with listed power consumption of less than 2.5W, making it the lowest-power device in the copied Comet family specifications. It also includes a 1.8-inch touchscreen, which is smaller than the displays used on some of the larger Comet models, but appropriate for quick status checks, local configuration, and access control on a device intended for portable use.

Environmental and physical figures place the Comet Q firmly in the compact end of the lineup. The operating temperature is listed as 0°C to 40°C, consistent with the rest of the family. The OCR copy of the table does not clearly preserve the final dimensions and weight entry for the Comet Q in the same way as the other models, but the wider specification set still makes clear that this is intended to be a lighter, lower-power, more travel-friendly device than the HDMI-based Comet units already in the range.

Specification	Gl.iNet Comet Q
Model	GL-RMQ1
CPU	Dual-core ARM Cortex-A53
Memory	512MB LPDDR4
Storage	64GB
Wireless Protocol	802.11a/b/g/n/ac/ax
Wireless Bands	2.4GHz, 5GHz
Ethernet Port	1 x RJ45 10/100/1000Mbps
USB Ports	USB 2.0 Type-A, USB 2.0 Type-C
Power Input	Type-C (5V/2A)
Power Consumption	<2.5W
Screen	1.8-inch touchscreen
Video Input	1 x USB-C (DP Alt supported)
Operating Temperature	0°C to 40°C
Notes	USB-C based KVM design intended for compatible mobile and computing devices

 

What is the Comet Q KVM bringing to the market that is new?

The main distinction of the Gl.iNet Comet Q is its physical design and target use case. Most KVM-over-IP devices are built around HDMI capture and are designed for desktops, servers, mini PCs, or rack-mounted hardware. The Comet Q instead shifts the concept toward a much smaller USB-C based form factor, with a pre-attached cable and integrated display in a body that is intended to be carried and deployed quickly. That makes it structurally different from the more static, cabling-heavy approach seen in much of the current KVM market.

Portability is another clear differentiator. The Comet Q is designed to operate from USB-C power at under 2.5W, which creates a very different deployment model from larger KVM appliances that often assume fixed placement, dedicated power, and a more permanent network setup. In practical terms, this makes the device easier to use in travel scenarios, temporary support jobs, meeting environments, mobile workstations, and short-term remote access situations where carrying a larger HDMI-based KVM would be less practical.

Its support for USB-C connected client devices also broadens the type of hardware that can be managed. The Comet Q is positioned not only for laptops and compact computers, but also for phones and tablets that support the necessary USB-C display and data standards. That gives it a role that is uncommon in the KVM-over-IP space, where Android phones, tablets, and similarly compact devices are not usually the primary focus. In that respect, the Comet Q is not just reducing size, but also changing the class of device a KVM can be attached to.

The single-cable approach is also important. Based on the demonstration and the listed hardware details, the Comet Q is intended to combine connection, control, and power handling through USB-C, while also supporting network access over LAN, WiFi, and remote internet connectivity. That creates a simpler deployment path than a conventional KVM setup that may require separate video, USB, power, and networking connections. The result is a product that appears to reduce setup complexity while extending KVM access to devices and environments that are not well served by existing HDMI-first designs.

How Does the Comet Q Compare with the Rest of the Gl.iNet KVM Lineup?

Within the wider Gl.iNet Comet series, the Comet Q sits as the most specialised and least traditional model in the range. The RM1 Comet, RM1PE Comet PoE, RM10 Comet Pro, and RM10RC Comet 5G are all built around a more conventional KVM design, using HDMI input and, in some cases, HDMI output for passthrough or expanded deployment. The Comet Q moves away from that approach by replacing HDMI capture with USB-C video input via DP Alt Mode, which changes both the kind of device it can connect to and the environments where it is likely to be used.

In hardware terms, the Comet Q is also the most lightweight system in the lineup. Its dual-core ARM Cortex-A53 processor and 512MB of LPDDR4 memory place it below the other Comet devices, which generally use quad-core ARM processors and 1GB of DDR3L memory. Its sub-2.5W power draw is also the lowest figure listed across the range. That lower hardware ceiling makes sense in context, as the Comet Q appears to prioritise mobility, compact deployment, and low power operation over the broader feature scope of the higher-end HDMI-based models.

The other Comet devices are more clearly structured for fixed installations or more complex remote management roles. The Comet PoE adds Power over Ethernet support for simpler networked deployment, the Comet Pro adds both HDMI input and output, and the Comet 5G extends this further with cellular connectivity through 4G LTE and 5G RedCap support. Compared with those, the Comet Q is not trying to be the most feature-rich model. Instead, it fills a separate position by targeting USB-C connected client hardware and a more portable usage model than the rest of the lineup.

This makes the Comet Q less of a direct replacement for the other Comet units and more of a complementary product. The HDMI-based models remain better suited to desktops, servers, fixed workstations, and network infrastructure where traditional video capture and broader connectivity options matter more. The Comet Q, by contrast, is better understood as a compact access tool for modern mobile and USB-C centric devices, where physical size, single-cable deployment, and lower power use are more important than maximum processing resources or infrastructure-oriented connectivity.

Interested in Gl.iNet KVM Devices? Here are some great options available NOW: Gl.iNet Comet Pro $179 – HERE on Amazon Gl.iNet Comet 5G $299 – HERE on Amazon Gl.iNet Comet PoE $129 – HERE on Amazon

Gl.iNet Comet Q KVM Price & Release Date?

At the time of filming, Gl.iNet had not confirmed a final release schedule for the Comet Q, and availability was still being discussed internally. The device shown in Shenzhen appeared to be relatively close to completion from a hardware and interface perspective, but it was still clearly in a pre-release state, with software behaviour, feature scope, and final implementation details still being adjusted. Gl.iNet also indicated that the launch route under consideration could involve Kickstarter, which suggests the company is still assessing demand and market positioning for this particular model.

Pricing was also not final at the time of the demonstration. The only estimate provided was a broad target range of around $100 to $200, with the expectation that the final retail position would likely sit closer to the lower end of that range than the upper end. Until Gl.iNet confirms official launch pricing, regional availability, and a release timetable, the Comet Q remains a revealed but not yet fully commercialised addition to the wider Comet KVM lineup.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

 

The Beryl 7 from Gl.iNet Finally Revealed

On January 6, 2026, day 1 of CES 2026, Gl.iNet is highlighting the Beryl 7 (GL-MT3600BE) as an upcoming travel router positioned below the company’s more premium Slate 7 in the same Wi-Fi 7 travel category. The device is being presented as a successor direction to the earlier Beryl AX generation, with Gl.iNet focusing its messaging on VPN throughput, portable use, and the practical ports and power features that matter when the router is used on the road. Pricing and a firm release date have not been included in the information shared so far.

In its CES materials, Gl.iNet describes Beryl 7 as a compact, dual-band Wi-Fi 7 model aimed at users who want higher encrypted throughput without stepping up to a larger, more feature-heavy travel router. Key claims include up to 1100Mbps on OpenVPN-DCO and WireGuard, dual 2.5G Ethernet capability, and support for 120+ connected devices, alongside USB Power Delivery compatibility and a 5V/2A power output intended to integrate cleanly with uFi and MiFi devices for primary or backup WAN use.

Gl.iNet Beryl 7 Travel Router – Design & Portability

The Beryl 7 measures at 120 x 83 x 34mm and 205 grams, placing it in the small-router class rather than the pocket-hotspot style. Compared with battery-powered travel routers, the added thickness is consistent with a design that prioritizes full-size ports and airflow while still staying compact enough for a backpack or a small tech pouch. Gl.iNet also lists an operating temperature range of 0C to 40C, which sets basic expectations for typical indoor and travel use, even though performance under sustained load will still depend on ventilation and ambient conditions.

Unlike cellular travel routers, the Beryl 7 is designed to be powered externally rather than running from an internal battery, so it is closer in use to a small plug-in router than a self-contained hotspot. It takes USB-C power via USB Power Delivery and is specified for 5V/3A, 9V/3A, or 12V/2.5A input, which keeps powering simple with common phone and laptop adapters and most power banks that support PD. Gl.iNet also lists a 5V/2A power output, intended to pair with uFi and MiFi devices when you want the router to sit in front of a separate upstream connection and keep that upstream device powered from the same setup.

Gl.iNet Beryl 7 Travel Router – Connectivity

The Beryl 7 is a dual-band Wi-Fi travel router rather than a cellular router. It does not include a SIM slot or eSIM support, which means it is not designed to connect directly to a carrier network on its own. In practice, internet access is expected to come from an upstream source such as a wired connection, USB tethering, or an external hotspot or modem that provides the WAN link. This approach matches travel setups where the router’s job is to manage your local network and security policies, while a separate device handles mobile connectivity when needed.

On the wireless side, the Beryl 7 supports 802.11a/b/g/n/ac/ax/be and operates on 2.4GHz and 5GHz. The published maximum rates are 688Mbps on 2.4GHz and 2882Mbps on 5GHz, which sets its theoretical peak figures for those bands. Because there is no 6GHz band listed, it will not have access to the cleaner spectrum that some tri-band Wi-Fi 7 routers use to reduce congestion in dense environments. Real-world performance will still depend heavily on client device capability, channel conditions, and how crowded the local RF environment is, especially in hotels, apartments, or event venues.

For wired networking, the Beryl 7 includes 1x WAN and 1x LAN, with both ports rated at 100/1000/2500Mbps. Having 2.5Gbps capability on both sides can matter if you are connecting to faster-than-gigabit service, or if you want to avoid bottlenecking a wired client such as a laptop dock, mini PC, or NAS while the router is also handling wireless clients. The dedicated WAN and LAN labeling also suggests a straightforward topology for travel use, where the router can sit between a wired uplink and your personal devices without requiring additional switches. Specific options like port re-assignment or multi-WAN behavior are still dependent on the final firmware feature set.

For tethering and peripherals, the router includes 1 USB 3.0 port. Gl.iNet’s positioning also references pairing it with uFi and MiFi devices for primary or backup WAN use, which aligns with common travel workflows where a hotspot provides the upstream connection and the router distributes it to multiple devices. Depending on software support, USB can also be relevant for other functions such as attaching storage for basic file sharing, but those capabilities are not confirmed solely by the presence of the port. The practical takeaway is that the Beryl 7’s connectivity design focuses on managing and distributing an external internet source rather than replacing that source with built-in cellular hardware.

Gl.iNet Beryl 7 Travel Router – Internal Hardware

The Beryl 7 is specified with a MediaTek quad-core CPU clocked at 2.0GHz. Gl.iNet has not stated the exact chipset model in the material provided, so it is difficult to compare directly against specific MediaTek families used in other routers, but the listed clock speed and core count indicate it is intended to handle routing and VPN workloads beyond basic hotspot sharing. How that translates in practice will depend on the final firmware feature mix and how much processing overhead is added by enabled services. Memory is listed as 512MB of DDR4. That capacity is typically sufficient for a travel router doing standard routing, firewalling, and VPN duties, but it can become a limiting factor if heavy logging, multiple concurrent services, or more advanced packages are enabled. In practical use, headroom will depend on how Gl.iNet tunes the stock firmware and whether the router is expected to run additional features beyond its default configuration. Storage is specified as 512MB of NAND flash. This is a smaller onboard footprint than some higher-end travel routers that use multi-gigabyte eMMC, and it generally implies a tighter space budget for the base firmware image, installed packages, and retained logs. It also means features that rely on persistent local storage may be more constrained unless Gl.iNet provides options to offload data to external storage via USB.

Gl.iNet Beryl 7 Travel Router – Software & Services

Gl.iNet is presenting the Beryl 7 as part of its travel router lineup, which typically uses the company’s GL.iNet firmware with a web-based management interface. That software approach tends to balance simplified setup for common tasks with access to more detailed configuration when needed, which is relevant for travel scenarios where you may want quick changes without digging through advanced menus.

For this model in particular, VPN is the main emphasis in Gl.iNet’s CES messaging. The company is making a specific performance claim of up to 1100Mbps on OpenVPN-DCO and WireGuard, positioning encrypted throughput as a headline reason to choose the Beryl 7 over older Beryl models or lower-end travel routers. Actual results will still depend on factors such as upstream bandwidth, server performance, encryption settings, and network conditions.

Gl.iNet also highlights Amnezia VPN support as part of the Beryl 7’s privacy and censorship-bypass positioning. That places the router within the company’s broader direction of expanding VPN tooling and privacy-related options across its travel lineup, though the exact implementation details for the Beryl 7 will come down to the shipping firmware and how features are exposed in the final interface.

Beyond VPN-related claims, Gl.iNet has not published a complete, model-specific list of software functions for the Beryl 7. Features that appear across other Gl.iNet travel routers, such as traffic controls, DNS and filtering options, remote access services, and package-style add-ons, may be present, but they are not confirmed by the hardware spec sheet alone. For ownership considerations, the missing pieces remain the update cadence, support window, and any limitations imposed by the device’s relatively small flash storage.

Gl.iNet Beryl 7 Travel Router – Conclusion

As presented on day 1 of CES 2026, the Beryl 7 (GL-MT3600BE) is positioned as a more affordable Wi-Fi 7 travel router option that sits below the Slate 7 in capability and likely in price, while serving as the next step after the Beryl AX generation. Its core proposition is a compact, USB-C powered router that focuses on high VPN throughput, dual-band Wi-Fi, and practical wired networking for travel setups. The specification sheet outlines a MediaTek quad-core 2.0GHz platform with 512MB DDR4 and 512MB NAND, paired with 2.5Gbps-capable WAN and LAN ports, plus a USB 3.0 port. It does not include an internal battery and it has no SIM or eSIM support, which means it is designed to sit behind an external internet source such as hotel Ethernet, phone tethering, or a dedicated hotspot. Power is handled through USB Power Delivery, and Gl.iNet also lists a 5V/2A output intended to keep an upstream mobile device powered in a single-cable travel arrangement.

The remaining unknowns are mostly around launch details and how the final firmware is packaged for a device with limited flash storage. Gl.iNet has not published pricing or a release date, and it has not provided a full, model-specific breakdown of software features beyond its VPN and privacy positioning. Those details will likely matter most to buyers deciding between the Beryl 7 and higher-end travel routers, especially if they plan to rely on add-on services, extensive logging, or other features that place more demand on storage and memory.

 

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE