Synology DS2422+ NAS Review – Go Big or Go Home?
I think it would be safe to say that Synology sells quite a lot of NAS. The brand has always had a strong focus on software and providing ‘solutions’, as opposed to ‘flogging hardware’, but ultimately the outcome is that Synology continues to be the top brand in network-attached storage worldwide. One of the biggest reasons for this of course is Diskstation Manager (DSM, currently in version 7.1), the fully-featured network software that is easily comparable in design, utility and quality to many top tier operating systems. DSM 7 is included with all Synology NAS systems to largely the same degree, but when it comes to hardware, their portfolio has tended to spread itself a little more in order to cater for those looking for value, power, features or scale – giving the end-user an opportunity to spend their budget on the areas of NAS that matter most to their network environment. The 2021/2022 released Synology DS2422+ NAS in today’s review is an interesting example of these lines being blurred by the brand and in doing so, trying to provide a little bit of everything. Arriving as the follow up to the DS2419+, this new massive 12-Bay SMB (small/medium business) solution has tweaked a few things it’s architecture, as well as including some of the opinion dividing changes to DSM 7 that have been rolled out in the last 12 months. The DS2422+ arrives with the now well established Ryzen embedded processor series, the opportunity for lots of memory, huge storage scalability, network upgradability and arrives as a solution that hopes to be the center of your home/business storage for many years (evolving over time). So today I want to review the Synology DS2422+ NAS and help you decide if it deserves your data.
Review Chapters – Skip Ahead
- Unboxing & Accessories
- Ports & Connections
- Internal Hardware
- Software & Services
- Verdict & Conclusion
Synology DS2422+ NAS Review – Quick Conclusion
When Synology launched the DS2422+ and DS3622xs+ NAS at the same time, despite them both being upgradable 12-Bays, the DS2422+ was a little in the shade of the bright, shiny and powerful DS3622xs+. It is understandable, while the DS2422+ arrives with a familiar embedded Ryzen CPU and supersized version of the architecture already present in the DS1621+ and DS1821+, the DS3622xs+ was a Xeon and 10GbE monster! But people tend to forget the price difference of well over $1000 between them and for may – THAT is going to be a HUGE dealbreaker. If you are already convinced by the Synology software eco-system and are concerned with how much capacity you are going to need in future, the DS2422+ is easily the best value for money that the brand provides right now. Aside from the upgradability of the system’s network connectivity down the line, memory upgrades when the time comes and storage expansions that effectively double your storage potential waiting for you – there is the simple advantage that the DS2422+ does NOT need to be fully populated on day 1. Thanks to Synology’s continuing support of SHR (Synology Hybrid RAID) on this NAS, it means that you can leverage your budget on this box to partially populate the NAS with storage media and then the rest of your budget on the rest of your network hardware or scaling the power of the device up considerable (as opposed to the ‘upfront’ nature of purchasing the DS3622xs+ hardware). Synology continued stance on 1st party HDD and SSD media is still continuing to ruffle feathers and the inclusion of this policy DS2422+ seems a pinch overkill, but now DSM 7.1 is being a touch less OTT about 3rd party media, this is less of a barrier that it once was. Once again, it comes down to how much you want to engage with the Synology ecosystem, its services, its business focus and ultimately how much the DS2422+ will be doing in your own network hardware environment. In conclusion, the DS2422+ IS a good NAS and if CAPACITY is more important to you than POWER, then the DS2422+ is by far the best Synology NAS for you in 2022.
The retail packaging for the Synology DS2422+ is fairly standard stuff. This is hardly a solution that you are going to pick up on the shelf of your local I.T shop, so priorities in the packaging are going to be massively in favour of protection in transit more than looking nice. The NAS arrives in 2 layers of cardboard box packaging and the NAS itself is held in a hard foam framework.
Synology has never really cut corners on protecting its solutions in transit and the DS2422+ NAS is no exception. The NAS arrives unpopulated, but even if it was fully populated with HDDs, this system will be well insulated from shock/motion damage (both of which can be silent killers of this kind of tech down the line.
Laying out the contents of the DS2422+ package shows us a small batch of accessories. These include details on the first time setup, information on the included 3yr warranty (can be extended to 5yr), RJ45 LAN cables (Cat 5e), screws for 2.5/3.5″ media, keys for the bays and an external mains power cable. All fairly standard stuff and you don’t even really need the 3.5″ screws in most setups as the bays are click-n-load.
Occasionally, I might have a moan about a NAS brand including Cat 5e RJ45 cables with a solution instead of Cat 6/7, however as the DS2422+ arrives with 1GbE, this is by no means an issue. Equally, I would highlight that the setup manual/paperwork is pretty redundant and SIGNIFICANTLY better setup guides are available online, but it’s better to include this than not at all.
The retail packaging of this business-focused NAS is unsurprisingly rather plain. This is hardly a crime and the Synology DS2422+ puts more stock in its design and deployment than it does in looking good in its box! Let’s take a close look at the design of the DS2422+ NAS
The design of the DS2422+ NAS Chassis is very familiar and is one that (although tweaked in small places over time) has remained largely the same over years throughout other releases in the 12-bay Diskstation NAS series. It has always provided a good balance of storage, versus efficient airflow and heat dissipation.
The DS2422+ chassis is almost entirely metal, with the only notable exception being the front panel of the desktop casing and the trays. This larger metal chassis, in conjunction with the 12 bays of SATA storage and twin rear fans results in a NAS that is most certainly going to make some noise. Although not reaching the “aeroplane take-off’ levels of noise that a rackmount like the RS1221+ reaches, the DS2422+ is still a NAS that you do not want to be in close proximity with when in full operation. the official Synology pages highlight that the noise level is a reported 25 dB(A), however, this is based on the use of 2TB Seagate Ironwolf HDDs (which do not feature on the compatibility list I might add) and not the enterprise build HAT5300 Hard drives that this system is designed to be used with, which are a noticeable degree noisier due to their high performance, workload and durability design. Below is a quick vid on their noise level:
The front of the Synology DS2422+ has no LCD/Display panel, but rather it has numerous LEDs for displaying system, activity and access. These can all be adjusted in brightness and activity in the DSM 7 control panel, with eat pertaining to different areas of the system hardware – Hard drives, network status, network connectivity and system health.
The 12 bays of storage featured on the DS2422+ are all well ventilated around the front oF the chassis and between each bay to allow passive airflow to flow as heat is dissipated inside. As mentioned earlier, the DS2422+ can run fully or partially populated, as well as be run on a single SATA HDD/SSD if need be (which would be rather daft). The system utilizes traditional RAID configurations to allow the end-user(s) to create a good balance of performance and redundancy in their storage over multiple drives. Additionally, the storage can be increased by adding further drives in available bays, an expansion chassis (the DX1222) the DS2422+ or via the popular Synology Hybrid RAID (SHR) configuration. Now, this is not a new thing and the PLUS series of Synology NAS has always allowed this configuration in a way that the larger and more powerful DS3622xs+ did not (for reasons of overall performance dip compared with traditional RAID levels i.e. RAID 1,5,6,10, etc). The benefits of SHR in terms of scalability and adding larger capacity drives to your storage array years down the line (as larger capacities HDDs arrive and/or prices decrease per TB) have always been a compelling part of buyers who purchased the PLUS series and always a bit of a puzzler why it is not available here on an XS series solution. SHR on the DS3622xs+ is not impossible if you are migrating from an older NAS as shown here in this video, but it is still a shame it remains absent on the DS3622xs+ as a day 1 choice. For many, this might be a deciding factor when choosing between the DS2422+ and DS3622xs+.
Each bay utilized a spring-loaded tray design that ensures that a drive will not be installed unless in full alignment with the internal SATA port inside. Additionally, each bay of the DS2422+ features a locking mechanism (with 2 keys included with your accessories pack) that ensures that accidental removal of an HDD/SSD in your NAS is not possible – this is especially useful as the DS2422+ does not support re-silvering and accidental removal of a drive for even just a single second can lead to hours upon hours or degraded RAID rebuilding.
The trays themselves are plastic in design, but the days of this being a negative are largely gone now and although early versions of NAS servers have cheaper and less robust plastic trays, this new generation Synology NAS has exceptionally well made plastic trays that are sturdy enough for even excessing storage use. Each tray also takes advantage of a click n load design that allows 3.5″ media to be installed without screws/screwdriver. Alternatively, there are screws and screw-holes for the installation of 2.5″ SATA SSD media for faster storage pools and/or caching storage. However, on the subject of storage media on the DS2422+, we should probably address the hard drive shaped elephant in the room.
The DS2422+ NAS is another release in the Synology High-end/enterprise series that has opted for a much more streamlined compatibility list. This results in this NAS only being fully 100% supported and compatible for use with Synology hard drives and SSDs. These include the HAT5300 and SAT5200 (along with a few others with upgrade options). Although there are a few exceptions to this, the compatibility list over on Synology.com is pretty clear on this:
Synology’s decision to only fully allow the storage capabilities of their systems with their own branded storage media on enterprise-level solutions was met with a mixed reception when it was rolled out in late 2021. On the one hand, the HAT5300 series of drives ARE good drives, arriving at a price point similar to the likes of Seagate Ironwolf Pro and WD Red Pro Pro-class Drives BUT featuring the architecture, performance and durability of Enterprise-class drives (such as Seagate EXOs and WD Gold) – it is a pretty good deal. Likewise, those looking for a full ‘one party’ solution will be pleased as it allows simple installation, deployment and management (with firmware updates and drive warranties being considerably easier to manage). However, with only four capacities of HAT5300 (4TB, 8, 12 and 16TB) at the moment, as well as a relatively sudden pull on the support of other hard drive brands on this system, it has left quite a few users unhappy. It is worth highlighting that using 3rd party hard drives on the DS2422+ in the latest release of DSM 7.1 is not blocked. You can go ahead and install and use the likes of WD Red, Ultrastar and Seagate Ironwolf HDDs in the DS2422+ for Storage Pools, volumes etc, as well as using drive health management tools such as S.M.A.R.T. However their use will lead to the system displaying an amber Warning message (formally showing ‘critical’, till Synology changed their position a little upon feedback from users) and drives will be listed as not on the official compatibility list. Not the end of the world, but for users who are installing the DS2422+ NAS solution professionally for 3rd parties, this might be jarring for the intended end-users.
Nevertheless, the HAT5300 and SAT5200 series are still very good drives for this system and its AMD embedded Ryzen CPU and 4GB memory to sink its teeth into and when fully populated and equipped with 2x10GbE connections banded together (via the installation of the network expansion card 10GBASE-T on the E10G18-G2) has been reported to reach 2,202MB/s Sequential Read and over a quarter of a 128,000+ 4K random Read IOPS.
Removing all the trays shows that all 12x SATA connectors are all combined data/power as you would expect. I did wonder, given the launch of Synology HAS5300 SAS Hard drives two months or so ago, that the next generation of this enterprise 12-Bay would factor in combined SATA/SAS connectors, but I guess then it would tread on the toes of the DS3622xs+ and rackmount solutions somewhat.
The DS2422+ NAS also features the neat and well-branded Synology ventilated/mesh logos on either side. Speaking as someone who has deployed a few Synology NAS solutions personally and professionally over the years, I can say these vents capture a lot more dust than you might expect and definitely help to assist passive airflow internally and assist dissipation. it is one of those slick design points that Synology are fond of,
The physical design of the DS2422+ is largely unchanged since the DS2415+ and DS2419+ that came before it, but that is no bad thing. It manages to balance large storage potential vs compact deployment, as well as maintaining that Synology branded modern design. The lack of a front-mounted USB is a bit odd, given the numerous convenient advantage this would provide, but it’s a minor gripe and given that this NAS is designed with remote/out-of-office deployment in mind, it’s not a big loss. Let’s talk about the connectivity and accessibility of the DS2422+ NAS and how it will provide physical access to your data.
The connectivity that is featured on the DS2422+ NAS has changed very little since the DS2419+ that came before it, but still arrives with plenty of network connections, storage options and the previously mentioned PCIe upgradability. When Synology first revealed the DS2422+ 12-Bay, many were quick to highlight that Synology still continues to resist the change from gigabit ethernet towards 2.5GbE on this system. This and the fact that DS3622xs+ arrives with 2x 10GbE is another example of how the DS2422+ at launch was a little in the shade comparatively in its contents. The rear of the chassis is largely dominated by the twin fans.
These two fans are 120mm in size each and are held in a large cooling module that can be removed as needed for cleaning and general maintenance. The sheer scale of the DS2422+ in storage and the amount of heat that is going to be generated by the system in operation means that active cooling and the effectiveness of these efficient components are going to be quite a high priority. By default, these fans will be set to automatic (adjusting their RPM as the system’s internal NAS temp dictates) and can be set to manual – but I definitely would not recommend it! The only real reason a user would want to manually control the operation of fans on a NAS would be for reasons of ambient noise and, to be frank, with this system fully populated with 12x HAT5300 NAS HDDs – the noise of the fans is going to be the leat of your ear troubles!
The DS2422+ features an internal 550W PSU which is surprisingly beefy for this NAS. Yes, those 12-bays of storage are going to need a decent amount of power to keep going, but aside from the PCIe slot needing power, there is no support for graphics cards or even the PSU featuring an additional power 4/6/8 connector for a grander PCIe card (there ARE ports for cable available in the PSU block, but no signs of Synology opening access to this for a PCIe upgrade). To put it into perspective, the DS1621+ and DS1821+ both arrive with a 250W PSU (so, less than half) and those two systems also features M.2 NVMe SSD slots (something not present on the DS2422+).
As mentioned, the Synology DS2422+ is another entry into the Diskstation Plus series that arrives with 4x 1 Gigabit Ethernet ports and that is somewhat underwhelming in 2022 – especially when most other NAS providers have immediately skipped to 10GbE at this tier or swapped 1GbE out in favour of 2.5GbE at the same price as 1G. The system DOES have four of these ports (supporting LAG/Trunking and therefore hitting 4Gbe with a smart switch setup) which is going to be tremendously useful.
As discussed several times here at NASCompares, 2.5GbE might not be dominating the marketplace compared with existing 1GbE utilization and not have the 1,000MB/s+ bandwidth possible in 10GbE, BUT it does seem strange that Synology has still not engaged with 2.5GbE on their NAS solutions (though admittedly featuring it on their RT6600ax Router). Although the argument against its inclusion is compelling (i.e still hardly mainstream), users looking at the DS2422+ will be hoping to get at least 3-5yrs of service out of this 24×7 hardware (likely more) and who’s to say where 1G/2.5G/10G will be at in that time with client hardware in your network environment. With many brands offering 2.5G solutions at the same price as 1G – this results in Synology’s steadfast refusal to include 2.5GbE in 2022 rather stubborn.
Nevertheless, if you already have a 1GbE network, or were going to opt for a 2x Port 10GbE upgrade card for around $200-250 for this system (rather than spend $1000+ more on the DS3622xs+) then you are not going to be hugely concerned one way or the other over the appearance of 1GGbE on the DS2422+. Much like other Synology NAS systems, the DS2422+ also arrives with USB 3.2 Gen 1 (5Gb/s) Type-A ports that allow you to connect a small range of hardware. The hardware that is supported has been pared back somewhat in recent years (devices such as Printers, scanners, Bluetooth and WiFi dongles were removed from the compatibility/supported lists in DSM 7 – possibly down to the way DSM 7 is built. Additionally, the USB on Synology NAS drives CAN NOT be used to interface with the NAS, as the NAS is the ‘host’ in this connection, not the PC/Mac etc. The USB ports CAN be used for external storage though and there is a wide range of applications in DSM that support connectivity of storage to these ports (USB Copy, Hyper Backup, File Station, Virtual Machine Manager and more).
There is an external mini SAS shaped port on the DS2422+ NAS that allows you to connect one of the DX1222 expansion chassis’ and add an additional 12 storage media drives to your available storage. If you are running an SHR setup, it is very easy to expand your existing Storage Pool and Volumes (if provisioned correctly) to spread across both the DS2422+ and expansion – though Synology does not recommend this (risk of accidental disconnection).
The PCIe slot that the DS2422+ features is a PCIe Gen 3×8 slot that allows you to install one of several Synology branded PCIe upgrade cards. Synology does support a few 3rd party PCIe cards from Intel (among others) but I have yet to test if cards not listed on the compatibility list display a similar warning to when you install 3rd party storage media or memory upgrades. Card installation is quite straight forward and although it will require the removal of the top plate of the system’s external casing, it is a simple click and load installation – no power cables needed.
Synology’s available range of PCIe cards has grown little by little in the last couple of years and now supports 10G and 25GbE, across multiple ports and in fiber and copper forms. In most desktop NAS systems in the Diskstaiton portfolio, I would call the E25G21-F2 with its two 25G ports a little overkill – but in the case of the 12-Bay DS2422+ and potential for another 12 bays in the DX1222 – That card might be just the thing to make the most of this systems throughput potential! Additionally, despite the DS2422+ not featuring the 2x m.2 NVMe slots of the other 2/4/6/8-Bay diskstation NAS, you can add this with the E10M20T1 Cobo card of M2D20 dedicated caching card (at an additional cost – grumble, grumble).
Overall, the default network connectivity is one of the weaker areas of the Synology DS2422+ NAS and although there is clearly a few areas of upgradability available to those that want them, what you have here is not a massive leap up from the previous 2 generations of SMB 12-Bay. Let’s get the external panels removed on the DS2422+ and discuss its internal hardware.
Accessing the internal hardware of the Synology DS2422+ NAS is considerably more convenient than smaller and more compact diskstation devices, with the external chassis of the server arriving in three individual panels that are secured by 2 screws each. Two of these panels are necessary for removal to allow access to ways in which you can upgrade the NAS hardware in its lifespan. Removing the panels shows us that the compact chassis design of the DS2422+ results in 50% of that internal space being given to the main storage backplane/board. This board has 12 SATA data+power connectors and is connected to the main system board via a PCIe slot at an angle.
That main storage board is remarkably clear internally, features vent holes above each drive bay and even the power cabling being fed into the board is discreet and understated at the base. The result is a huge area of clear space for ventilation running through both the media bays AND over the large CPU heatsink. Unlike the top and left side panel of the DS2422+, this side of the chassis will not really need to be accessed for any reason other than troubleshooting, but it’s reassuring to see that the internal components are very well spaced out, despite the compact nature of this 12-bay chassis.
The right-hand panel of the DS2422+ covers the two SODIMM memory slots featured on this NAS. Now I was very pleasantly surprised to not that the memory included with the DS2422+ is rated at 3200Mhz frequency. Now, the memory featured on the SMB/Center-Business solutions from Synology in the last few years have all featured an ECC (Error Code Correction / Error Correcting Code) component, to ensure that micro errors and inconsistencies in data as they are passed through the system memory are spotted and corrected. Indeed, this has always been a big hardware factor in the buying decision of IT Admins that like to dig deep into the specs sheets. But till this 2022 series, Synology has always opted for 2400Mhz memory ECC (whilst providing fractionally faster 2666Mhz non-ECC in their Home/Prosumer devices) – so this is a nice upgrade that (correct me if I am wrong) Synology has not raised anywhere online. I respect that.
The fact this system has 4GB of memory is a little underwhelming for businesses and most businesses are going to need to upgrade that memory quite early into it’s deployment. However, it is worth remembering that much like Synology and their position on drive media or PCIe upgrades, they have a very strict officially supported compatibility list and using non-Synology branded memory. As this is largely a business targetted solution, many of those buyers will be happy to purchase first-party accessories with a solution to guarantee that they stay within the warranty, ensure the system works to the standard and heights promised by the manufacturer, etc. However, not everyone feels that way and even if you factor in that the branded memory in the DS2422+ is ECC and 3200Mhz, the cost of Synology memory modules online is noticeably higher than the likes of Kingston, Crucial or Transcend. Once again, it is only going to be a barrier if you do not want to commit to the Synology eco-system completely.
The CPU featured inside the DS2422+ NAS is the AMD embedded Ryzen V1500B and this is now the 2nd generation of devices to arrive with this efficient but very capable processor. Arriving in a 4 Core, 8 Thread architecture, it features a 2.2Ghz clock speed per core. Synology has largely ignored embedded graphics CPUs in their business/enterprise systems (the last 12-Bay example was the DS3612xs+ with an Intel Core i3 a decade ago) and the V1500B is continuing that position. As proficient as this processor is for large file transfers, running all those first-party Synology applications and dynamically shifting it’s resources to where they are needed nice and quick, this processor still lives a little in the shadow again of the CPU in the DS3622xs+ (a quad-core Xeon) and once again is a clear cut example of how the DS2422+ chooses ‘Storage Capacity’ over ‘Power in it’s design. The Processor still does a fantastic job of running the full Synology collaboration suite, Surveillance Station, Multi-client backups and Cloud synchronization tools, all at the same time though, which ultimately means that you have a solid hardware base to wrap your business data around. The Synology DS2422+ is clearly trying to be a local desktop PaaS and SaaS solution in one, with the kind of storage capacity options that most cloud providers are simply never going to be able to offer at the same price.
When it comes to running Virtual Machine environments on the DS2422+ NAS, things are a little more mixed. The NAS arrives with the Synology Virtual Machine Manager, so you can create multiple brand new virtual machines quickly, as well as insert virtual installation/boot media and run very bespoke VM setups (licence free). There are also many ways to import existing ISO VM, Virtual Hard drive or 3rd party VM images (Hyper X, VMware, etc) onto the Synology VMM tool, as well as significant cross over with other Synology applications such as Active Backup Suite to host VMs in a failover routine. All this is managed by the CPU very well, despite not having embedded graphics, and the processor’s multiple threads also mean that VM deployment is a little more flexible with the use of dynamic resource sharing and vCPUs supported. However, I would not really pursue VMs on the DS2422+ NAS without upgrading that memory on day 1.
External performance of this 12-Bay and that CPU in the default setup is immediately going to saturate those 4x 1GbEs with ease. Aside from the general starting internal architecture being more than enough anyway, we are talking about up to a 12 HDDs and/or SSDs – that can easily it the 1000’s of megabytes of throughput anyway. So, it’s only by more enterprising setups involving SSDs and 10GbE that we can get a more realistic picture of what this system can output. Below is the sequential R/W performance and 4K Ransom IOPs of the DS2422+ with SSDs in a RAID 5, 2x 10GbE (Link Aggregated) and how it compares with three other Plus series 12/16-Bay’s in Synology’s portfolio (RS2821RP+, RS2421+ and the DS2419+ Predecessor). The DS2422+ hit 2,202MB/s Seq Read and 1,457MB/s Seq Write throughput externally – a big jump on the DS2419+ predecessor, but the tiniest fraction behind the rackstation solutions (hardly noticeable in fact). However, in 4K random IOPS, it was the leader of the pack, at 128,406 Read IOPS and 65,098 Write IOPS. Again, exceedingly close to the similarly built rackmounts, but a big jump up on the older 2019 gen 12-Bay plus series model.
Overall, the hardware that the DS2422+ features internally is very competent, more than proficient but will not exactly blow your socks off. You have a great base of hardware to handle standard business data management and with several options to scale up the hardware on offer, is a decent upgrade on its predecessor and what you have by default is more than enough to handle those 12 bays of storage. The lack of onboard NVMe SSD slots is still rather surprising, given Synology’s big push on this feature in the majority of their NAS systems and the default 4GB of memory seems a little small when you factor in what this system will be purchased for, but overall I think this is still a good balance of hardware for this scale of storage and cost when put into perspective with the rest of Synologys portfolio. Let’s discuss Synology NAS software, DSM, and how it makes up the lion’s share of the DS2422+’ price tag.
Now, to cover the WHOLE Synology software and services that are included with the DS2422+ NAS would result in a review that is twice as long as this review so far! Synology’s Diskstation Manager software that comes with this device (either DSM 7, DSM 7.1 or DSM 6.2 depending on your preference) provides a massive arrangement of services, applications (first and third party supported) and a huge number of client applications for desktop, mobile, windows, Mac and Linux (as well as a bunch of other more home-based tools). These allow management and access to the data on the DS2422+ in very tailored ways, as well as the web browser-based access that has the appearance, intuitive design and responsiveness of a local operating system. The DSM interface can be accessed by hundreds of users at the same time (with each user having tailored access, rights and privileges). DSM is available with ALL Synology NAS and the depth and abilities of DSM on any NAS are dependent on the hardware architecture of the NAS itself. In the case of the Synology DS2422+, it supports practically EVERYTHING (with the exception of SHR, as previously mentioned). If you want to learn about the latest version of DSM 7 and the software and services that are included with the DS2422+ NAS, watch my FULL review below (alternatively, you can read the DSM 7 Full Review HERE):
As mentioned, the DS2422+ supports pretty much the entirety of the DSM 7 and DSM 6.2 applications and services. If you are an existing user of SaaS and PaaS (Software as a service and Platform as a service) from the likes of Google Workspace and Office 365, knowing that you can synchronize these systems or choose to export away from them onto the Synology services is going to be very appealing. Key business applications that are included with your NAS are:
Synology Office – Create documents, spreadsheets, and slides in a multi-user environment. Real-time synchronization and saving make collaboration a breeze.
Synology Chat – Aimed at businesses, Synology Chat is an IM service that transforms the way users collaborate and communicate.
Synology Drive – Host your own private cloud behind the safety of your NAS with 100% data ownership and no subscription fees.
Synology Moments – Manage your photos and videos with deep-learning algorithms that automatically group photos with similar faces, subjects, and places.
Synology Calendar – Stay on track, share calendars, and schedule meetings, while ensuring sensitive information remains safely stored on company premises.
Synology Active Backup for Business (ABB) – Consolidate backup tasks for virtualized environments, physical servers, and personal computers, and rapidly restore files, entire machines, or VMs – completely license free.
Synology Hyper Backup – backup you NAS safely and efficiently to multiple destinations with deduplication, integrity checks, compression, and versioning.
Synology Surveillance Station – Safeguard your business, home, and other valuable assets with reliable video surveillance tools.
Synology Virtual Machine Manager (VMM) – An intuitive hypervisor that supports Windows, Linux, and Virtual DSM virtual machines. Its powerful disaster recovery tools help users achieve maximum service uptime.
Synology High Availability – Synology High Availability (SHA) combines two Synology NAS servers into one active-passive high-availability cluster, alleviating service disruptions while mirroring data.
Synology Central Management System (CMS) – Synology CMS allows you to manage multiple Synology NAS servers quickly and conveniently from a single location.
Synology Video Station – Manage all your movies, TV shows, and home videos. Stream them to multiple devices or share them with friends and family.
Synology Photo Station – Built to help photographers manage their photos and share them with clients for feedback or business development.
Synology Audio Station – Manage your music collection, create personal playlists, stream them to your own devices, or share with family or friends.
Synology File Station – Manage your Synology NAS files remotely through web browsers or mobile devices.
You cannot really fault the software and services that are included with the Synology DS2422+ NAS, as you are going to get the very best experience available on the platform, thanks to the hardware and architecture of this NAS. DSM 7 is an ever-evolving platform, so if you are reading this now at the time of publishing or years later, there is always going to be something in DSM for everyone.
When Synology launched the DS2422+ and DS3622xs+ NAS at the same time, despite them both being upgradable 12-Bays, the DS2422+ was a little in the shade of the bright, shiny and powerful DS3622xs+. It is understandable, while the DS2422+ arrives with a familiar embedded Ryzen CPU and supersized version of the architecture already present in the DS1621+ and DS1821+, the DS3622xs+ was a Xeon and 10GbE monster! But people tend to forget the price difference of well over $1000 between them and for may – THAT is going to be a HUGE dealbreaker. If you are already convinced by the Synology software eco-system and are concerned with how much capacity you are going to need in future, the DS2422+ is easily the best value for money that the brand provides right now. Aside from the upgradability of the system’s network connectivity down the line, memory upgrades when the time comes and storage expansions that effectively double your storage potential waiting for you – there is the simple advantage that the DS2422+ does NOT need to be fully populated on day 1.
Thanks to Synology’s continuing support of SHR (Synology Hybrid RAID) on this NAS, it means that you can leverage your budget on this box to partially populate the NAS with storage media and then the rest of your budget on the rest of your network hardware or scaling the power of the device up considerable (as opposed to the ‘upfront’ nature of purchasing the DS3622xs+ hardware). Synology continued stance on 1st party HDD and SSD media is still continuing to ruffle feathers and the inclusion of this policy DS2422+ seems a pinch overkill, but now DSM 7.1 is being a touch less OTT about 3rd party media, this is less of a barrier that it once was. Once again, it comes down to how much you want to engage with the Synology ecosystem, its services, its business focus and ultimately how much the DS2422+ will be doing in your own network hardware environment. In conclusion, the DS2422+ IS a good NAS and if CAPACITY is more important to you than POWER, then the DS2422+ is by far the best Synology NAS for you in 2022.
|Synology DS2422+ PROS||Synology DS2422+ CONS|
LET ME KNOW ABOUT NEW POSTS
Enter your email address to subscribe to this blog and receive notifications of new posts by email.
Join 1,263 other subscribers
Get an alert every time something gets added to this specific article!
This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below