UGREEN Reveal Two New 4-Bay NAS – The DXP4800 Pro and DXP4800S

UGREEN DXP4800S NAS Specifications

The DXP4800S is seemingly positioned as an updated variant of the original DXP4800, retaining the same core hardware layout while adopting Intel’s newer N150 processor and faster DDR5 memory. The shift to the N150 provides a modest frequency increase over the N100 but maintains identical core count, thread count and power behaviour. Memory remains user accessible through a single slot, with support for up to 16GB. The rest of the internal structure is unchanged, including four SATA bays, two NVMe slots and the same Gen three by one PCIe wiring. The system is intended as a compact x86 home server with improved AI-assisted photo indexing and modest efficiency gains over the standard model.

Externally, the device keeps the original USB layout, HDMI output and 2.5GbE gigabit LAN. The SD card reader remains SD 3.0 and the flash storage stays at 32GB. The overall focus of this model is small refinements rather than a re-engineered platform. Users familiar with the DXP4800 will find the same physical design and the same expandability, but with slightly higher supported memory frequency and a newer entry class processor that aligns with Intel’s Twin Lake manufacturing cycle.

UGREEN DXP4800 Pro NAS Specifications

The DXP4800 Pro introduces more substantial hardware changes than the S variant. It replaces the Pentium Gold processor found in the DXP4800 Plus with the Intel Core i3-1315U, which provides additional cores, higher thread count and improved frequency. This positions the Pro as the most capable four bay x86 model in UGREEN’s lineup. The system also upgrades its SD card reader to SD 4.0 and increases maximum supported memory to 96GB through two DDR5 slots. Internal storage layout remains unchanged, with four SATA drive bays and two NVMe slots, both fully accessible without modifying the chassis. Connectivity mirrors the Plus model by retaining 1x 10GbE and 1x 2.5GbE USB connectivity remains a mix of Gen two front ports and a Gen one rear port. HDMI output continues to support 4K at 60Hz. These choices maintain consistency with the previous model and allow the CPU upgrade to be the primary differentiator rather than a broader redesign of the platform.

UGREEN DXP4800S vs DXP4800 NAS Specifications

The DXP4800S is a small technical update to the original DXP4800. Both systems use the same chassis, the same storage layout and the same port arrangement, including four SATA bays, two NVMe slots, a single 2.5GbE network port and the same USB configuration. The primary distinction is the CPU. The older DXP4800 uses the Intel N100, while the DXP4800S switches to the Intel N150, which increases maximum frequency but retains the same four core and four thread structure. Memory configuration also remains largely the same but the S model supports up to 5600MHz DDR5 rather than 4800MHz. All other hardware behaviour is unchanged. Both systems include 32GB of onboard flash, HDMI with 4K60 output and an SD 3.0 card reader. Drive support continues to allow up to 30TB per SATA bay and up to 8TB per NVMe slot. Because of these similarities, the DXP4800S functions as a direct incremental revision of the DXP4800 rather than a new performance tier, and the difference in everyday workloads will be minimal outside of small frequency gains.

Component	DXP4800	DXP4800S
Processor	Intel N100, 4 cores and 4 threads, up to 3.4GHz	Intel N150, 4 cores and 4 threads, up to 3.6GHz
Architecture	x86, Intel 7	x86, Intel 7
Memory	8GB DDR5, 1 slot, up to 16GB, 4800MHz	8GB DDR5, 1 slot, up to 16GB, 5600MHz
SATA Bays	4, supports 2.5 inch and 3.5 inch drives	4, supports 2.5 inch and 3.5 inch drives
NVMe Slots	2 x M.2 NVMe 2280, up to 8TB each	2 x M.2 NVMe 2280, up to 8TB each
Flash Storage	32GB	32GB
Network	1 x 2.5GbE	1 x 2.5GbE
USB	Front USB 3.2 Gen2 Type A and Type C, rear USB 3.2 Gen1	Same ports and speeds
USB2	2 rear ports	2 rear ports
SD Reader	SD 3.0	SD 3.0
HDMI	4K60	4K60

UGREEN DXP4800 Pro vs DXP4800 Plus NAS Specifications

The DXP4800 Pro introduces a more significant hardware step forward compared with the DXP4800 Plus. The Plus model uses the Intel Pentium Gold 8505, while the Pro replaces it with the Intel Core i3 1315U which increases the number of cores, improves thread count and provides higher boost frequencies. Memory capacity also expands from a maximum of 64GB on the Plus to 96GB on the Pro, and the Pro continues to use DDR5 at 5600MHz as its upper supported speed. Flash storage capacity increases from 128GB on the Plus to the same 128GB on the Pro, and internal drive support remains unchanged with four SATA bays and two NVMe slots. Both units maintain the same network arrangement with one 10GbE port and one 2.5GbE port. USB connectivity also remains the same with front USB 3.2 Gen2 Type A and Type C ports and a rear USB 3.2 Gen1 port supplemented by two USB2 ports. The one external difference is the SD card reader which moves from SD 3.0 on the Plus to SD 4.0 on the Pro. The rest of the platform remains identical which makes the CPU, memory ceiling and SD reader the factors that separate the two models.

Component	DXP4800 Plus	DXP4800 Pro
Processor	Intel Pentium Gold 8505, 5 cores and 6 threads, up to 4.4GHz	Intel Core i3 1315U, 6 cores and 8 threads, up to 4.5GHz
Architecture	x86, Intel 7	x86, Intel 7
Memory	8GB DDR5, 2 slots, up to 64GB, 4800MHz	8GB DDR5, 2 slots, up to 96GB, 5600MHz
SATA Bays	4, supports 2.5 inch and 3.5 inch drives	4, supports 2.5 inch and 3.5 inch drives
NVMe Slots	2 x M.2 NVMe 2280, up to 8TB each	2 x M.2 NVMe 2280, up to 8TB each
Flash Storage	128GB	128GB
Network	1 x 10GbE and 1 x 2.5GbE	1 x 10GbE and 1 x 2.5GbE
USB	Front USB 3.2 Gen2 Type A and Type C, rear USB 3.2 Gen1	Same ports and speeds
USB2	2 rear ports	2 rear ports
SD Reader	SD 3.0	SD 4.0
HDMI	4K60	4K60

UGREEN DXP4800 Pro and DXP4800S NAS Release and Price

Both the DXP4800 Pro and DXP4800S are currently listed only in selected Asian regions, with no confirmed schedules for North America, Europe or Australia. Early pricing shows the DXP4800S positioned above the original DXP4800 and the DXP4800 Pro positioned above the DXP4800 Plus, reflecting the newer processors and higher memory ceilings. Regional pricing is based on local currency and tax structures, and the values shown in early listings cannot be treated as indicators of final western pricing. Availability outside these regions is expected to depend on component inventory and on UGREEN’s wider rollout plans, and any potential release is unlikely before early 2026.

Interested in buying a UGREEN NAS, and want to support what me and Ed do at NASCompares easily? Use the links below and we get a small commission (and costs you nothing extra) and helps us  keep doing what we do!

UGREEN DH4300 NAS	UGREEN DH4300 NAS	UGREEN DH4300 NAS

Join Inner Circle

Want to follow specific category? Also Read...Jonsbo N6 NAS Case ReviewBeelink ME Pro NAS RevealedBeelink ME Pro NAS RevealedBest Low-Cost / Value NAS of tBest Cheap NAS of 2025Best 4/5/6 Bay NAS of 2025Best PLEX or Jellyfin NAS of 2The Best NAS of the Year - 202Best NAS of the Year 20255 Mistakes New NAS Buyers ALWA Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Ugreen continue d’étendre sa gamme de NAS avec l’annonce de 2 nouveaux modèles : les Ugreen DXP4800S et DXP4800 Pro. Ces deux NAS à 4 baies viennent compléter une série déjà bien accueillie par les utilisateurs en quête d’un stockage performant, compact et accessible. Pour l’instant réservés au marché chinois, ces modèles pourraient prochainement faire leur apparition en Europe. Faisons le point sur leurs caractéristiques techniques et leurs différences…

Ugreen DXP4800S, une petite évolution

Commençons par l’Ugreen DXP4800S. Ce nouveau NAS conserve la même base matérielle : 4 emplacements pour disques durs 3,5 pouces ou SSD SATA, ainsi que 2 logements M.2 NVMe pour des SSD ultra-rapides. Sous le capot, Ugreen a choisi un processeur quad-core Intel N150 (jusqu’à 3,6 GHz), une évolution face au Intel N100 du DXP4800. Cette mise à jour promet une légère hausse des performances, particulièrement visible sur les tâches multitâches ou les usages multimédias (transcodage, virtualisation légère…). Le boîtier embarque 8 Go de RAM DDR5, extensibles jusqu’à 16 Go.

Connectique

Côté connectique, le DXP4800S ne bouleverse pas la formule, mais reste très complet :

• 2 ports USB 3.2 Gen 2 (dont 1 Type-C)
• 1 port USB 3.0 Type-A
• 1 port USB 2.0 Type-A
• 1 lecteur de carte SD
• 1 sortie HDMI 2.1
• 2 ports Ethernet 2,5 Gb/s

La vraie nouveauté vient du support du Wi-Fi 6 grâce à l’intégration d’une carte AX1800 en option (apparemment celle-ci, mais cela reste à confirmer). Cette compatibilité sans fil ouvre la voie à une utilisation plus flexible, notamment pour les utilisateurs souhaitant exploiter leur NAS sans câblage Ethernet. Si Ugreen confirme cette intégration, il s’agirait d’un atout supplémentaire face aux concurrents, encore peu nombreux à proposer le Wi-Fi sur leurs NAS. Nul doute que les autres modèles Ugreen pourront également en profiter.

En résumé, le DXP4800S se présente comme une évolution douce mais pertinente du DXP4800 : un processeur plus moderne, une compatibilité réseau enrichie et toujours la même conception solide, à la fois silencieuse et efficace.

Ugreen DXP4800 Pro

Le second modèle annoncé, l’Ugreen DXP4800 Pro, vise un tout autre public : les utilisateurs avancés, les petites entreprises ou les créateurs de contenu exigeants. Ce NAS se positionne entre le DXP4800 Plus et le DXP6800 Pro, deux références déjà bien établies dans le catalogue Ugreen.

Le DXP4800 Pro repose sur un processeur hexa-core Intel Core i3-1315U capable de monter jusqu’à 4,5 GHz. Il est épaulé par 8 Go de RAM DDR5 (extensibles jusqu’à 64 Go). Ce NAS rentre dans une autre catégorie. Il est taillé pour des usages intensifs : hébergement de machines virtuelles, serveurs multimédias 4K/8K, environnements de développement…

Comme son petit frère, il dispose de 4 baies SATA et 2 emplacements M.2 NVMe, permettant de combiner grande capacité de stockage et très hautes vitesses de transfert.

Connectique

Ugreen soigne également la connectique du DXP4800 Pro, qui se veut plus orientée « pro ». On retrouve :

• 2 ports USB 3.2 Gen 2 (dont 1 Type-C)
• 1 port USB 3.0 Type-A
• 2 ports USB 2.0 Type-A
• 1 lecteur de carte SD
• 1 sortie HDMI 2.1
• 1 port Ethernet 2,5 Gb/s
• 1 port Ethernet 10 Gb/s

La présence d’un port 10 Gb/s reste un atout majeur pour les professionnels et les particuliers exigeants. C’est idéal lorsque l’on doit manipuler de gros volumes de données, notamment en post-production vidéo ou dans les environnements de travail collaboratif. Cela permet d’exploiter pleinement les SSD NVMe et d’obtenir des débits réseau proches de ceux d’un SSD interne, à condition bien sûr d’avoir une infrastructure compatible.

Prix et disponibilité

Avec ces 2 nouveaux modèles, Ugreen confirme son ambition de s’imposer sur le marché du NAS, dominé depuis des années par Synology, QNAP et Asustor. Le constructeur mise sur des configurations récentes, une conception soignée et un bon rapport performances/prix.

Reste à connaître le prix de lancement et la date de disponibilité sur le marché européen. Officiellement, rien n’a fuité… Si Ugreen parvient à maintenir une tarification compétitive, le DXP4800S pourrait séduire les utilisateurs à la recherche d’un premier NAS performant, tandis que le DXP4800 Pro s’adresserait clairement aux utilisateurs professionnels ou aux créateurs de contenu exigeants.

source