Can We Forgive and Forget The Synology HDD Compatibility Flip Flop?

Synology’s recent reversal on hard drive compatibility has reopened a larger debate about whether its NAS systems remain a trustworthy and sensible choice for both new buyers and long-term users. Throughout most of 2025, the company faced sustained criticism after enforcing strict drive verification checks that prevented users from installing or operating third-party HDDs and SSDs from major brands like Seagate and Western Digital. This policy, applied to the new Plus-series NAS models such as the DS925+, DS1525+, and DS1825+, effectively forced customers to purchase Synology’s own branded media or risk an unusable system. For a company long regarded as the industry standard for dependable and user-friendly storage solutions, the move appeared both unexpected and self-defeating. Although Synology later justified the decision as a way to ensure system stability and reliability, the backlash was immediate and global, with declining sales and widespread frustration among users who saw the change as a form of corporate overreach. Now, with the brand having confirmed a full rollback through the DSM 7.3 update—restoring support for non-Synology drives and removing prior warning prompts—the discussion has shifted. While the reversal is seen as a victory for users, it also highlights how fragile consumer confidence has become, and how a single policy misstep can redefine a company’s relationship with its community.

Below, my original video after the change by Synology after 6 months of their strict HDD media stance:

What Did Synology Do Wrong?

Synology’s critical mistake was implementing a restrictive hardware policy that undermined one of its key historical strengths: flexibility. For years, the company had built its reputation on offering an intuitive software platform, DSM, that ran on a wide variety of hardware configurations. By deciding to enforce hard drive compatibility restrictions in the 2025 generation of Plus-series NAS systems, Synology effectively turned once-open devices into closed platforms. The systems refused to initialise DSM or create storage pools when non-Synology drives were detected, and even when users managed to proceed, the interface was flooded with persistent warnings labelling third-party media as “unverified” or “at risk.” This move frustrated not only home users who wanted affordable upgrade options, but also small businesses that relied on Synology NAS for their daily operations. It created unnecessary technical and financial barriers at a time when alternative NAS vendors were offering greater compatibility and value. The brand’s own messaging made the situation worse: early statements focused on “system integrity” and “firmware optimisation” but failed to acknowledge that the change mainly benefited Synology’s hardware sales rather than the end user.

The second major error lay in how the company managed the fallout. Synology’s communication strategy throughout the controversy was inconsistent, fragmented, and in some regions almost non-existent. Different regional branches released conflicting press materials, with some hinting that compatibility with Seagate and Western Digital drives would soon return, while others maintained silence. No clear timeline or explanation was given for the testing process or the reasoning behind such aggressive enforcement. As a result, long-standing partners and distributors were left unsure of how to address customer concerns. Meanwhile, the online community—particularly on Reddit, NAS forums, and YouTube—quickly filled the information vacuum, fuelling frustration and speculation. Instead of clarifying the company’s intentions, Synology appeared defensive and disengaged, disabling comments on some of its own videos and refusing to directly address mounting criticism. This combination of restrictive policy and poor communication not only hurt its reputation but also suggested a growing disconnect between the brand’s leadership and its user base.

Why Are Users Mad at Synology?

Many users felt betrayed by Synology’s actions because the company had long marketed itself as the reliable, user-first alternative to more complex or DIY storage solutions. For years, Synology’s systems were praised for their openness—allowing customers to build their NAS setups using widely available components from trusted brands like Seagate, WD, and Toshiba. The introduction of hard drive restrictions in 2025 fundamentally altered that relationship. Suddenly, the same users who had invested heavily in Synology’s ecosystem found themselves unable to upgrade, expand, or even install DSM without purchasing the brand’s own drives, which were often rebranded versions of existing enterprise models sold at a premium. The move was viewed as a breach of trust, and the lack of transparency surrounding it only made things worse. Many saw it as an attempt to create a closed ecosystem that prioritised recurring hardware profits over customer freedom. This frustration was compounded by the timing—during a period when users were already facing higher hardware costs and tighter IT budgets, making Synology’s restrictive approach feel especially tone-deaf.

The Alerts and ‘Warnings’ that users have gotten used to up tll now (i.e pre DSM 7.3 roll out):

Another major source of anger came from how the policy rollout created confusion and inconsistency across Synology’s product lineup. While the Plus-series desktop NAS models received the strictest restrictions, larger RackStation and XS-series devices remained unaffected, creating the impression that Synology viewed its home and small-business customers as expendable. Even after announcing the rollback with DSM 7.3, many users noted that the company’s official compatibility lists still failed to mention Seagate or WD drives, and that public communication about the change was minimal. For those outside tech circles, this meant that the situation looked unchanged—product pages still implied that only Synology drives were supported, and many older negative reviews remained visible online. As a result, even with the restrictions now lifted, the perception of Synology as a brand willing to prioritise profit over user loyalty persists. The long delay in addressing community backlash, combined with inconsistent messaging, has left many customers sceptical that this U-turn represents a genuine shift rather than damage control.

What Did Synology Do to Fix This?

Synology’s eventual fix came in the form of a full policy reversal integrated into DSM 7.3, the company’s next major software update. With this version, users of the 2025 generation of Plus-series NAS devices—including models such as the DS925+, DS1525+, and DS1825+—regained the ability to freely use third-party hard drives and SSDs. The update removed not only the installation barriers but also the persistent “unverified drive” and “at risk” warnings that had previously appeared in Storage Manager. For most users, this restored full functionality, allowing them to initialise DSM, create and expand RAID arrays, use hot spares, and assign SSDs for caching without restrictions. The change essentially returned Synology’s systems to the state they were in before the controversial policy was introduced earlier in the year. The reversal applied primarily to desktop-class NAS systems rather than rackmount or XS-series models, suggesting that Synology wanted to restore goodwill among its core consumer and small-business audience first.

However, the way Synology implemented this reversal has drawn mixed responses. Instead of releasing a simple compatibility database update, which could have resolved the issue quickly, the company bundled the fix into a full DSM version upgrade. That meant users had to install an entirely new operating system build to regain third-party drive support, even if they were otherwise satisfied with their existing DSM 7.2 installations. For those managing multiple NAS units or enterprise environments, this created complications, especially since DSM 7.3 initially lacked a public beta and required careful validation before deployment.

The company also issued few direct statements about the rollback, opting instead for limited press communications that focused on “listening to customer feedback.” Despite the importance of the change, Synology’s product pages still make little mention of renewed Seagate and WD compatibility, leaving potential buyers to rely on external coverage or word of mouth. While the technical fix was effective, the manner of its rollout showed that Synology’s communication strategy remains cautious, reactive, and focused on damage limitation rather than proactive transparency.

What were/are the benefits of Buying Synology-branded Hard Drives and SSDs?

In parallel with the policy adjustments introduced in DSM 7.3, Synology has also begun expanding a series of benefits and incentives aimed at customers who purchase Synology NAS systems together with Synology-branded storage media. These initiatives are part of the company’s ongoing effort to strengthen its vertically integrated ecosystem, ensuring optimal performance and reliability when all components come from the same source. In selected markets, buyers who purchase Synology HAT, HAS, or SAT series drives on the same invoice as their NAS hardware now receive extended warranty coverage of up to five years, administered directly through authorized distributors and resellers. In addition, Synology has introduced an Express Replacement program, allowing for immediate drive swaps during the warranty period without waiting for the defective unit to be shipped and inspected, effectively mirroring the convenience of a premium RMA service. These benefits are available at no extra cost when drives are purchased through approved channels. The initiative is designed to make Synology’s validated ecosystem more appealing to businesses seeking predictable lifecycle management and faster recovery in the event of hardware failure, while also providing an incentive for users to standardize on Synology-branded components rather than mixing third-party storage.

Head over to Blackvoid HERE to read Luka’s great write-up on DSM 7.3 below:

Why Are Some Users Unconvinced?

Many long-time Synology owners remain sceptical because the company’s pattern of restrictive decision-making has not been limited to hard drives. Over the years, Synology has gradually tightened control over hardware support in other areas, such as M.2 NVMe SSD usage, network adapters, and GPU compatibility. Even though the recent rollback allows full use of third-party HDDs and SSDs in Plus-series models, the same freedom does not apply to NVMe storage. Users still cannot create storage pools or volumes on M.2 drives unless they are Synology-branded, which reinforces the perception that the company is only willing to compromise when it faces enough public pressure. Critics point out that while Synology deserves credit for reversing the hard drive restrictions, it has shown no similar flexibility in other parts of its ecosystem. This selective openness suggests a tactical move designed to repair short-term reputation damage rather than a genuine shift toward more open hardware policies. As a result, many users fear that future DSM updates could easily reintroduce similar restrictions under a different justification.

Another concern is that Synology has not done enough to communicate these changes clearly to new buyers. Even after the DSM 7.3 announcement, the company’s official compatibility lists for 2025 models still prioritise its own drives, with no explicit mention of Seagate or WD models being supported again. For first-time users who rely on these lists for purchasing decisions, there is no clear indication that the policy has changed.

This lack of transparency undermines confidence in Synology’s commitment to openness. Furthermore, the decision to tie the rollback to a major DSM update rather than a smaller patch raises worries that the company could use similar tactics in the future to control hardware functionality through software revisions. Many see the reversal as a necessary correction rather than an act of goodwill, and that distinction matters. Users may accept Synology’s reasoning for now, but the brand’s reputation for reliability has been replaced by a lingering doubt about whether it can be trusted to keep its platform open and user-focused.

NAS Series	Drives on Compatibility List	Drives Not Listed	Drives on Incompatibility List
RS Plus (e.g., RS2423+, RS422+)	Supported for new installation, storage pool creation, and migration	Supported only for migration; cannot create new storage pools or caches	Fully blocked from all operations
DVA/NVR Series (e.g., DVA1622, DVA3221, NVR1218)	Supported for installation and migration	Supported only for migration; cannot create new storage pools	Fully blocked from all operations
Supported Drive Types	HDD and 2.5″ SATA SSD	HDD and 2.5″ SATA SSD (migration only)	All drive types blocked
Drive Example Notes	Synology HAT5300/HAT3300 verified; select enterprise drives	Seagate IronWolf, SkyHawk, WD Purple not yet verified for use	Drives failing thermal or firmware tests
Use Case	Rackmount and surveillance workloads requiring consistent write throughput	Data migration or backup restoration	Unsupported entirely

Should You Trust Synology NAS Again?

Trusting Synology again depends largely on how much users value its software ecosystem compared to its corporate behaviour. The company’s DSM operating system remains one of the most advanced and stable NAS platforms available, offering a wide range of applications for backup, surveillance, multimedia, and virtualization that are unmatched by most competitors. For those who prioritise reliability, ease of use, and integration over raw hardware flexibility, Synology still provides a compelling product. The reintroduction of unrestricted hard drive support in DSM 7.3 restores much of the practical functionality that users lost earlier this year, and for many, that will be enough to justify purchasing a new NAS. From a technical standpoint, the Plus-series devices are still capable and efficient, with consistent performance, strong data protection features, and excellent long-term support. In short, the hardware remains solid, and the software continues to define Synology’s market dominance in turnkey storage solutions.

Below, references to the change in hard drive support policy are either absent in release notes or severely underplayed on the compatibility pages as of 3rd Nov 2025.

However, from a consumer trust perspective, caution is still warranted. The brand’s repeated pattern of restricting features, followed by later partial reversals, has left many wary that similar policies could return in future product generations. Even though DSM 7.3 represents a positive correction, Synology has not issued any long-term assurances that it will maintain this open stance. There is also concern about how much influence profit margins and proprietary hardware incentives continue to have over product decisions. For experienced users, the safest approach may be to treat Synology as a premium but increasingly closed ecosystem—one that delivers outstanding software at the cost of long-term flexibility. Whether it is “okay” to buy a Synology NAS now depends on priorities: if you value a polished interface and dependable system behaviour above everything else, Synology is still one of the best options available. But if transparency, open standards, and full hardware freedom matter more, then the company’s recent U-turn should be seen not as a full restoration of trust, but as a cautious and temporary concession to public pressure.

If/When you do wish to purchase a Synology NAS, please do use the links below in order to purchase your NAS. Doing so results in a small commission coming to me and Ed here at NASCompares, and it allows us to keep doing what we do here, and is the most frictionless and zero-cost way for you to support our articles, reviews, videos, guides, support systems and more.

Synology DS925+ NAS	Synology DS1525+ NAS	Synology DS1825+ NAS
Check Amazon in Your Region for the Synology DS925+ NAS	Amazon in Your Region for the Synology DS1525+ NAS @ $799	Amazon in Your Region for the Synology DS1825+ NAS @ $1149
heck B&H for the Synology DS925+ NAS	B&H for the Synology DS1525+ NAS @ $1149.99	B&H for the Synology DS1825+ NAS @ $1149.99

 

 

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

Should You Upgrade Your Synology from DSM 7.2 to DSM 7.3?

DSM 7.3 represents Synology’s final major release under the DSM 7 platform before the expected transition to DSM 8, and it introduces a mix of refinements, policy reversals, and new enterprise tools that signal both the maturity and the approaching end of this software generation. The update arrives after an extended rollout period that began in mid-2025 and has been deployed gradually across supported NAS models to ensure stability. It brings several notable changes, most prominently the revision of the company’s restrictive hard drive policy under the new HCL 5.0 standard, allowing a broader range of third-party drives on 2025 Plus series systems. Other additions include the Synology Tiering package, designed to automate storage management between multiple NAS devices, and the introduction of the AI Console, a framework that integrates external AI and LLM providers into Synology’s productivity applications. Alongside these new components, DSM 7.3 also adds incremental updates such as native exFAT support, more flexible encryption handling, improved domain and directory management, and several kernel-level security patches.

However, for most existing users running DSM 7.2, the decision to upgrade should not be automatic. Many of the most visible features in DSM 7.3, including Synology Drive 4.0 and early versions of Synology Tiering, can already be accessed through separate beta packages on DSM 7.2 without performing a full system upgrade. Moreover, DSM 7.3 has arrived without a public beta phase, leading to mixed community feedback on compatibility issues and minor application regressions reported during early adoption. The release is stable for general use, but it represents an incremental refinement rather than a fundamental reinvention of Synology’s operating environment. For many users, DSM 7.3 serves as both a capstone for the current platform and a preparatory step toward the next-generation DSM 8 ecosystem expected to follow in 2026.

Should You Upgrade to Synology DSM 7.3? The TL;DR

For most existing Synology users, DSM 7.3 is a cautious, incremental update rather than a transformative one. It refines several areas—particularly in data security via vulnerability patches, encrypted storage handling, and drive compatibility—but few of these changes are critical for stable systems already running DSM 7.2. The improved drive policy on 2025 Plus models is a welcome reversal of the restrictive compatibility introduced earlier, yet older systems benefit little beyond quality-of-life improvements. Similarly, the new Synology Tiering and AI Console frameworks show potential but are limited in scope, requiring multi-system deployments or external AI integrations that do not suit typical home or small business users. In short, DSM 7.3 is reliable and functionally solid, but it introduces no must-have feature for those already content with DSM 7.2. Users with newer 2025 Plus series hardware, or those who need to take advantage of the new tiering, encryption, or administrative tools, can confidently upgrade once their model is supported. However, administrators running mission-critical workloads, media servers, or older legacy devices may prefer to wait until early 2026 for further stability updates or the initial DSM 8 previews. The release feels transitional—a final, polished step for the DSM 7 generation rather than a defining milestone—so unless your deployment directly benefits from one of its headline features, remaining on DSM 7.2 remains a perfectly reasonable choice.

Want to Support What We Do? Use the Links Below to Buy your NAS and/or HDD and SSD Media. Clicking these links will result in a small commission for anything you purchase, heading to me and Eddie @NASCompares and allows us to keep doing this! It’s just us two here and between this and ads, it’s the most passive way to keep us sailing! Thanks

Synology NAS and Media on Amazon – HERE Synology Products on B&H – HERE Seagate Ironwolf Media on Amazon – HERE WD Red Media on Amazon – HERE Seagate Products on B&H – HERE WD Products on B&H – HERE

Will Upgrading to DSM 7.3 Remove My Ability to Hardware Transcode?

Upgrading to DSM 7.3 does not remove hardware transcoding support on systems that already possess compatible integrated graphics or dedicated GPU functionality. The removal of hardware transcoding drivers occurred earlier, during the rollout of DSM 7.2.2, and affected only specific 2025-generation NAS models where Synology chose to disable HEVC (H.265) hardware acceleration for licensing and driver maintenance reasons. For all older devices—such as the DS920+, DS423+, and DS224+—the upgrade to DSM 7.3 preserves existing transcoding capabilities, including both H.264 and H.265 conversions, assuming these were functional in DSM 7.2. Users can continue to use hardware-assisted video conversion in applications such as Synology Video Station (if you still have it!), Plex, and Jellyfin without additional configuration. No drivers are removed or replaced by the DSM 7.3 upgrade process, and GPU-accelerated workloads remain fully accessible. The only cautionary point applies to future NAS models that will ship with DSM 7.3 preinstalled, as these may already reflect Synology’s newer driver policy, but existing systems upgrading from DSM 7.2 retain their transcoding performance entirely unchanged. Just remember that Synology 2025 series devices that have an integrated graphics CPU do NOT have the graphics driver by default. Watch the video below to learn more:

Will Upgrading to DSM 7.3 Result in My M.2 SSDs Becoming Unsupported or Unusable?

For most users, upgrading to DSM 7.3 will not cause any change to M.2 SSD functionality. Systems that already have existing cache or storage configurations using M.2 NVMe drives in DSM 7.2 will continue to operate normally after the upgrade, with no data loss or drive disconnection. The update does not remove support for previously installed third-party NVMe SSDs, nor does it alter existing caching or volume structures.

However, DSM 7.3 maintains Synology’s restrictive stance on creating new NVMe-based storage pools (i.e only their own bradned drives currently) or caches using unverified drives. While the broader HCL 5.0 policy restores open drive usage for SATA HDDs and SSDs on the 2025 Plus series, it does not extend to M.2 NVMe media, which still require official validation to be initialised in new roles. Users upgrading from DSM 7.2 who already have third-party M.2 drives configured will see no functional difference, but those attempting to add or reassign new NVMe devices after the upgrade will remain subject to the same compatibility enforcement introduced in DSM 7.2.

Is Synology Drive 4.0 Worth Upgrading to DSM 7.3 For?

Synology Drive 4.0 introduces a collection of small but practical improvements that enhance team collaboration and file management, but none of these changes require DSM 7.3 to function. The new version adds improved file labelling and categorisation tools, making it easier for teams to assign colour-coded or custom tags to shared content.

It also refines file request functionality, allowing users to specify reasons for requesting access and to track these submissions more transparently. File locking has also been expanded, now supporting manual control in addition to automatic version locking, which prevents conflicts when multiple users are editing the same document.

Together, these updates improve workflow precision and traceability, particularly in shared office environments or remote teams using Drive as a private alternative to cloud collaboration platforms such as OneDrive or Google Drive.

Beyond these refinements, Synology Drive 4.0 also brings stronger integration with Synology Account authentication, a requirement for accessing its newest collaborative features. This includes cross-user label sharing, improved audit tracking, and the option to enforce identity binding for Drive users in larger deployments.

However, all of these capabilities remain accessible to DSM 7.2 users via Synology’s beta package program, meaning there is no requirement to upgrade to DSM 7.3 to test or use them. Unless you specifically need tighter Drive account linkage or plan to adopt other DSM 7.3-only features such as Tiering or AI Console integration, the Drive 4.0 update alone does not justify upgrading your NAS operating system.

Is Synology Tiering Worth Upgrading to DSM 7.3 For?

Synology Tiering is one of the most significant new features in DSM 7.3, introducing an automated data management system designed to move infrequently accessed files from fast “hot” storage to lower-cost “cold” storage across multiple NAS devices. The concept is similar to hierarchical storage management in enterprise systems, but unlike QNAP’s QTier, it does not operate within a single NAS.

Instead, it requires two or more Synology NAS units running DSM 7.3, with the hot tier hosting the primary, frequently used data, and the cold tier configured as a secondary vault where less active files are migrated. Administrators can create tiering plans that determine how long a file remains in the hot tier based on modification or access frequency, with policies ranging from one day to several years. Transfers occur automatically over encrypted HTTPS connections, and stub files are left behind in the hot tier to preserve accessibility, allowing users to recall files seamlessly when needed.

However, despite its potential, Synology Tiering remains a beta-stage feature with limited configuration depth and hardware support. Not all NAS systems qualify for hot-tier deployment, and the supported model lists are inconsistent. For example, the DS425+—a system without M.2 slots—supports hot-tier operation, whereas the DS923+, which features greater performance and expandability, does not. Likewise, several older Plus-series models and most rackmount units are limited to cold-tier functionality only.

The service currently lacks integration with Synology Drive, encrypted folders, or other key DSM services, meaning many shared folders cannot participate in tiering policies. While the feature offers promise for businesses managing distributed sites or large archives, it is still early in development and unsuitable as the sole reason to perform a DSM 7.3 upgrade. It can also be tested independently on DSM 7.2 via the beta package, allowing administrators to evaluate its practicality before committing to a full system migration.

It is worth noting that Synology’s allocation of which NAS systems qualify as hot-tier and cold-tier devices under DSM 7.3 results in some unusual distinctions between models. Several systems with similar or even higher technical specifications are listed only as cold-tier devices, while others with more modest hardware are fully approved for hot-tier functionality.

For example, the Intel Celeron-based DS225+, which supports only SATA HDDs and lacks M.2 NVMe or 10GbE connectivity, is officially designated as a hot-tier system. In contrast, the AMD Ryzen R1600-based DS923+, which includes dual M.2 NVMe slots and 10GbE upgradability, appears only on the cold-tier list.

This creates a noticeable mismatch between capability and feature assignment across both desktop and rackmount systems, suggesting that Synology’s tiering support matrix has been determined on a per-model basis rather than by hardware class.

Model Listings (as defined under DSM 7.3):

• Hot-tier supported systems:
  FS6400, FS3600, FS3410, FS3400, FS2500, FS200T, HD6500, SA3400D, SA3200D, SA6400, SA3610, SA3600, SA3410, SA3400, RS4021xs+, RS3621xs+, RS3621RPxs, RS2825RP+, DS3622xs+, DS1823xs+, DS1621xs+, DS1825+, DS1525+, DS925+, DS725+, DS425+, DS225+.

• Cold-tier supported systems:
  HD6500, FS6400, FS3600, FS3410, FS3400, FS2500, FS200T, SA3400D, SA3200D, SA6400, SA3610, SA3600, SA3410, SA3400, RS4021xs+, RS3621xs+, RS3621RPxs, RS2825RP+, RS2423RP+, RS2423+, RS2821RP+, RS2421RP+, RS2421+, RS1221RP+, RS1221+, RS822RP+, RS822+, RS820RP+, RS820+, RS422+, DS3622xs+, DS1823xs+, DS1621xs+, DS2422+, DS1825+, DS1821+, DS1621+, DS1525+, DS1522+, DS1520+, DS925+, DS923+, DS725+, DS723+, DS920+, DS720+, DS620slim, DS425+, DS423+, DS420+, DS225+, DS224+, DS220+, DVA1622, DVA3221.

The division between these two groups highlights some unexpected choices, where NAS models with more advanced configurations—such as integrated NVMe storage or faster network options—are limited to cold-tier participation, while smaller, SATA-only systems are permitted full hot-tier operation.

Are Synology AI Admin Console Services Worth Upgrading to DSM 7.3 For?

The Synology AI Console is a new administrative framework introduced in DSM 7.3 that allows NAS administrators to connect external artificial intelligence and large language model (LLM) services, such as OpenAI, Azure OpenAI, Google Gemini, and Amazon Bedrock, directly into select Synology productivity applications. Its purpose is to enhance tools like Synology MailPlus and Synology Office with text summarisation, translation, and content generation capabilities.

Rather than hosting AI workloads locally, the Console acts as a bridge between the NAS and third-party AI providers through user-supplied API keys. Administrators can control who can access these features, set daily or per-minute token limits to manage consumption, and monitor all requests via detailed transaction logs.

A privacy-focused de-identification mechanism can also be enabled to mask sensitive data—such as names, IP addresses, or account details—before it leaves the NAS for external processing, restoring it upon return.

While these controls demonstrate a well-considered security approach, the AI Console remains divisive. Because all AI requests are processed externally rather than on-device, the system sends portions of MailPlus and Office text content to third-party cloud providers for analysis and response generation.

Even with encryption and masking in place, this design conflicts with the expectations of users who adopt a NAS precisely to maintain full local control over data.

Moreover, the Console currently supports only text-based functions and does not provide local inference, on-device LLM hosting, or GPU-accelerated processing, which limits its appeal to professional or privacy-conscious users. For most home and small-business owners, the AI Console is an optional enhancement rather than a compelling reason to upgrade.

It may benefit organisations already running MailPlus or Office in a collaborative environment, but its dependence on external AI infrastructure means its inclusion in DSM 7.3 is unlikely to justify a system-wide update on its own.

A Pre-emptive Warning about DSM 7.3 and Synology RS / Rackstation and NVR / DVA Surveillance Systems

While DSM 7.3 restores third-party hard drive flexibility on the 2025 DiskStation Plus range, this policy change does not extend to RackStation (RS) or DVA/NVR systems. These models continue to enforce Synology’s restricted compatibility framework, requiring officially verified HAT, HAS, or SAT series drives for full SMART monitoring, health data reporting, and warranty-backed operation. Unverified drives may still function but typically appear with degraded status indicators, limited temperature or lifespan data, and persistent “incompatible” warnings within Storage Manager.

This limitation remains particularly relevant to surveillance deployments, as Synology has yet to certify common NVR-grade drives such as Seagate IronWolf, Seagate SkyHawk, or WD Purple series models. At the time of writing, only one 2025-generation RackStation has been released under this policy, but Synology is expected to expand the line-up significantly into Q1 2026, with new models such as the DVA7400, DVA3000, and additional 4- and 8-bay RS systems all expected to ship with DSM 7.3 pre-installed and to follow the same verified-drive enforcement. As such, administrators planning future rackmount or surveillance deployments should confirm drive support in advance, as Synology shows no signs of relaxing its enterprise compatibility standards for these product tiers.

Should You Upgrade to DSM 7.3? VERDICT

For most existing Synology users, DSM 7.3 stands as a careful, incremental evolution of the platform rather than a major overhaul. It introduces refinements in data protection, encryption handling, and administrative control while restoring a more open stance on third-party hard drive use under the new HCL 5.0 policy. These adjustments address several long-standing user concerns, particularly on the 2025 Plus series, where Synology has finally reintroduced full flexibility for HDD and SSD compatibility. However, outside of that reversal, DSM 7.3’s core updates—such as minor kernel improvements, user interface refinements, and system efficiency tweaks—represent evolutionary stability rather than innovation. The release also marks Synology’s first attempt to integrate AI-based administrative tools and multi-tier storage, but both features remain optional, niche in scope, and better suited to advanced users or multi-NAS deployments. For those running stable DSM 7.2 environments, the upgrade is beneficial but not essential, as few of the new capabilities materially alter day-to-day operations.

That said, DSM 7.3 remains a worthwhile step forward for users who want to align their systems with Synology’s next-generation framework before DSM 8’s eventual release. Owners of newer 2025 models such as the DS925+, DS1525+, or RS2825RP+ will likely find the update unavoidable, as it forms the baseline for upcoming package releases and extended security support. Administrators managing large data environments may also appreciate the improved directory integration, enhanced file versioning, and native exFAT support included in this release. Still, those relying on older Plus or XS-class devices for media, backup, or general storage tasks may prefer to wait for a few minor revisions before upgrading, allowing early adopters to expose any unforeseen issues. DSM 7.3 is polished and well-structured, but it feels transitional—a bridge between legacy DSM 7.2 deployments and the more modern, AI-aware infrastructure Synology is preparing for DSM 8. Unless you specifically require its new storage policies, tiering capabilities, or AI integration, remaining on DSM 7.2 remains a stable, low-risk option for the foreseeable future.

Which Systems Support the DSM 7.3 Upgrade? (Updated List)

The DSM 7.3 (version 7.3-81180) update is available as a manual download for an extensive range of Synology NAS systems, spanning the Plus, XS, SA, FS, HD, Value, and J series. Rollout continues in stages, meaning some users will not yet receive an automatic update notification. Once installed, DSM 7.3 cannot be downgraded to a previous version, and for many older models, it will be the final feature-bearing update, with future maintenance limited to security and stability patches.

The complete set of DSM 7.3 installation files, as listed in Synology’s October 2025 release, confirms support for virtually all NAS models released between 2016 and 2025. Key model families include:

DiskStation desktop systems:
DS1019+, DS116, DS118, DS119j, DS120j, DS124, DS1517+, DS1517, DS1520+, DS1522+, DS1525+, DS1618+, DS1621+, DS1621xs+, DS1817+, DS1817, DS1819+, DS1821+, DS1823xs+, DS1825+, DS216+, DS216, DS216+II, DS216j, DS216play, DS218+, DS218, DS218j, DS218play, DS220+, DS220j, DS223, DS223j, DS224+, DS225+, DS2419+, DS2419+II, DS2422+, DS3018xs, DS3617xs, DS3617xsII, DS3622xs+, DS416, DS416j, DS416play, DS416slim, DS418, DS418j, DS418play, DS419slim, DS420+, DS420j, DS423+, DS423, DS425+, DS620slim, DS716+, DS716+II, DS718+, DS720+, DS723+, DS725+, DS916+, DS918+, DS920+, DS923+, DS925+.

RackStation and enterprise systems:
RS1219+, RS1221+, RS1221RP+, RS1619xs+, RS18016xs+, RS18017xs+, RS217, RS2416+, RS2416RP+, RS2418+, RS2418RP+, RS2421+, RS2421RP+, RS2423+, RS2423RP+, RS2818RP+, RS2821RP+, RS2825RP+, RS3617RPxs, RS3617xs+, RS3617xs, RS3618xs, RS3621RPxs, RS3621xs+, RS4017xs+, RS4021xs+, RS422+, RS816, RS818+, RS818RP+, RS819, RS820+, RS820RP+.

Data-centre and performance platforms:
FS1018, FS2017, FS2500, FS3017, FS3400, FS3410, FS3600, FS6400, HD6500, SA3200D, SA3400, SA3400D, SA3410, SA3600, SA3610, SA6400.

Video analytics and surveillance models:
DVA1622, DVA3219, DVA3221.

Virtual DSM package:
VirtualDSM 7.3-81180.

This dataset confirms that DSM 7.3 has been compiled for almost every currently supported platform, with file sizes ranging from roughly 300 MB for entry-level systems (such as the DS120j and RS217) up to 430 MB for enterprise and FlashStation devices. Users operating 2025-generation systems such as the DS225+, DS425+, DS725+, DS925+, DS1525+, DS1825+, RS2825RP+, and SA3410 will receive DSM 7.3 pre-installed or as part of first-release firmware. For older devices dating back to 2016–2018, DSM 7.3 will act as the final major update before DSM 8 arrives in 2026.

Which Synology NAS will See DSM 7.3 as their LAST Major Synology Update?

The DSM 7.3 (version 7.3-81180) update is available for a wide range of Synology NAS models, though rollout is staged and certain older systems will remain on DSM 7.2 or earlier. It is important to note that DSM 7.3 will be the final major upgrade for many devices, after which they will continue to receive only security and maintenance patches. Users should also be aware that once installed, DSM 7.3 cannot be downgraded.

Models eligible for DSM 7.3 upgrade:
FS Series: FS3017, FS2017, FS1018
XS Series: RS18016xs+, RS4017xs+, RS3617xs+, RS3617xs, RS3617RPxs, RS18017xs+, DS3617xs, DS3617xsII, DS3018xs
Plus Series: RS2416RP+, RS2416+, DS916+, DS716+II, DS716+, DS216+II, DS216+, DS1817+, DS1517+, RS2818RP+, RS2418RP+, RS2418+, RS818RP+, RS818+, DS1618+, DS918+, DS718+, DS218+, RS1219+
Value Series: DS116, DS216, DS216play, DS416, DS416play, DS1517, DS1817, DS418play, RS217, RS816
J Series: DS216j, DS416j, DS416slim, DS419slim, DS418j, DS218j, DS119j

For these devices, DSM 7.3 represents the end of the feature update cycle, effectively marking the transition point toward DSM 8, which will accompany newer 2026 and later hardware. Users operating 2025-series NAS systems that are produced by Synology in 2026 (the DS225+, DS425+, DS725+, DS925+, DS1525+, DS1825+, and RS2825RP+) will receive DSM 7.3 by default and will likely be among the first to transition to DSM 8 once available.

---

Is the Synology DS925+, DS1825+, DS1525+, etc NAS OK to Buy Now?

As this change in unverified hard drive support policy by Synology seems to be rolled out in the DSM 7.3 update, that means that currently if you buy and deply a Synology x25 generation NAS, you will still be subject to the restricted HDD deployment status of DSM right now (i.e cannot initialize, cannot RAID build, Rebuild, hot spare, etc unless using a Synology labelled drive or one that eventually might arrive on the compatibility list). So, if you buy the new Synology DS925+, DS1825+ or DS1525+ – unless you were already going to buy Synology hard drive and SSD media, you won’t be able to do very much out the box! So, if you are only considering a Synology NAS right now IF it can be used with 3rd party and/or unverified storage media – DO NOT BUY until the DSM 7.3 update rolls out! You will just be wasting some of your 3 year included warranty whilst you wait!

HOWEVER –If/When you do wish to purchase a Synology NAS, please do use the links below in order to purchase your NAS. Doing so results in a small commission coming to me and Ed here at NASCompares, and it allows us to keep doing what we do here, and is the most frictionless and zero-cost way for you to support our articles, reviews, videos, guides, support systems and more.

Synology DS925+ NAS	Synology DS1525+ NAS	Synology DS1825+ NAS
Check Amazon in Your Region for the Synology DS925+ NAS	Amazon in Your Region for the Synology DS1525+ NAS @ $799	Amazon in Your Region for the Synology DS1825+ NAS @ $1149
heck B&H for the Synology DS925+ NAS	B&H for the Synology DS1525+ NAS @ $1149.99	B&H for the Synology DS1825+ NAS @ $1149.99

 

---

Below are further videos from over the course of the last 6+ months that cover the evolution of Synology and this controversial hard drive support policy.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

 

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

The Synology Hard Drive and SSD Support Change in DSM 7.3 Explained – What You Can/Cannot Do

With the release of DSM 7.3, Synology has formally introduced its latest and most detailed round of storage compatibility policies to date, outlining exactly which hard drives and solid-state drives are supported across its growing NAS product ecosystem. These updates arrive after several years of gradual tightening in Synology’s hardware validation process, which began in 2021 with the introduction of the HAT5300 and HAT3300 drives and became fully enforced in the 2024–2025 generation of devices. Under DSM 7.2, many of these newer systems—in particular the Plus series—were restricted to using Synology-branded drives only, effectively preventing users from creating storage pools with unverified third-party disks. This limitation led to considerable backlash from the community and power users who had relied on flexible drive choices for mixed or repurposed storage builds.

DSM 7.3 introduces a new structure to this policy, known internally as the HCL 5.0 framework, which partially relaxes those restrictions for 2025 model-year DiskStation Plus and J series NAS systems. It reinstates the ability to use non-listed hard drives and SATA SSDs for pool creation, while maintaining a degree of verification for higher-end systems such as the XS, SA, FS, and HD series. The update is significant because it rebalances Synology’s approach to drive validation, aligning reliability goals with user flexibility. In addition, DSM 7.3’s drive-handling system now displays clearer notifications within Storage Manager, differentiating between listed, unlisted, and incompatible drives, helping users understand the operational impact of their hardware choices before deploying them into active volumes or caches.

For professionals managing larger deployments, DSM 7.3 also provides expanded transparency on what Synology considers “verified reliability,” listing the precise categories of tests that certified drives undergo—thermal stress, power cycle endurance, and abnormal shutdown simulation—before being added to the official compatibility list. These details are especially relevant for IT administrators planning storage upgrades or migrations, as the new compatibility tables make it clear which drive types can be used in different Synology product families. This article breaks down the logic behind these changes, explains how Synology’s updated system reacts to various drive types, and clarifies which NAS lines now support third-party drives under DSM 7.3.

Want to Support What We Do? Use the Links Below to Buy your NAS and/or HDD and SSD Media. Clicking these links will result in a small commission for anything you purchase, heading to me and Eddie @NASCompares and allows us to keep doing this! It’s just us two here and between this and ads, it’s the most passive way to keep us sailing! Thanks

Synology NAS and Media on Amazon – HERE Synology Products on B&H – HERE Seagate Ironwolf Media on Amazon – HERE WD Red Media on Amazon – HERE Seagate Products on B&H – HERE WD Products on B&H – HERE

Why Synology Has Changed Hard Drive and SSD Support in DSM 7.3?

When the Synology 2025 PLUS series launched in spring 2025, Synology’s decision to restrict many newer NAS models to officially approved Synology-branded drives marked a major turning point in the company’s storage policy, triggering widespread criticism across its user base. Systems like the DS923+ and DS1522+ suddenly required drives from Synology’s HAT or SAT ranges for creating new storage pools, leaving long-time users frustrated that they could no longer use trusted third-party disks from vendors such as Seagate or Western Digital. Synology’s explanation at the time centered on reliability: they claimed a growing number of support incidents were linked to unverified drives with unstable firmware, inconsistent temperature readings, or poor power recovery behavior. The aim was to unify performance standards across the portfolio and ensure that every supported configuration met enterprise-grade validation tests already used in their FS and SA lines. However, as the backlash grew throughout 2024 and early 2025, it became clear that many customers—especially small businesses and home users—felt alienated by this rigid policy. Some migrated to alternative NAS ecosystems, while others publicly voiced concerns about the long-term openness of Synology’s platform. In response, Synology developed a new compatibility framework known as HCL 5.0, introduced in DSM 7.3, to strike a balance between reliability and flexibility. This new approach reinstates the ability to use unlisted hard drives and 2.5-inch SATA SSDs for storage pool creation on 2025 DiskStation Plus, Value, and J series models, provided the drives are not explicitly marked as incompatible. Meanwhile, enterprise systems such as the FS, SA, XS, and HD ranges continue to enforce strict compatibility for mission-critical stability. Synology described this as a pragmatic evolution of its policy, aligning with customer expectations while continuing to collaborate with major drive manufacturers to validate additional models under its new testing program. The result is a hybrid policy that protects Synology’s enterprise reliability standards but restores much of the flexibility and user confidence that defined the brand’s earlier systems.

What Happens When a User Installs a Hard Drive That Is Not on the Compatibility List but Is Not on the Incompatibility List Either?

Under DSM 7.3, Synology has overhauled how its NAS systems handle drives that are not officially listed in the compatibility database but are also not explicitly marked as incompatible. This new policy, part of the HCL 5.0 framework, restores the flexibility that was largely lost with DSM 7.2. For users of 2025 DiskStation Plus models, including systems such as the DS1525+, DS925+, and DS725+, these drives are now treated as fully functional and supported for installation, storage pool creation, and volume management. When a non-listed HDD or SATA SSD is installed in these units, DSM 7.3 accepts it without generating warnings, restrictions, or “unverified” messages. The drive behaves identically to a fully approved model, and users can create new RAID arrays, expand existing volumes, and use all standard DSM features such as snapshots, encryption, and Hyper Backup. This marks a significant shift from DSM 7.2, which blocked pool creation entirely if the installed drive was not verified by Synology.

The only distinction that remains is on the support side rather than the user interface. While DSM 7.3 operates normally with these drives, Synology’s technical support team may limit assistance for issues proven to be caused by non-listed hardware. This distinction allows experienced users to use mixed or legacy drives at their discretion while maintaining a clear boundary of responsibility. From a practical standpoint, performance, drive telemetry, and reliability monitoring remain fully available, including S.M.A.R.T. analysis, temperature reporting, and bad sector scanning. Storage pools built with these drives are indistinguishable from those using Synology-validated models, which means users can freely upgrade or migrate without worrying about feature loss.

The only exceptions to this open policy involve M.2 NVMe drives and systems outside the Plus, Value, or J series. NVMe SSDs used for caching or storage pools still require official validation because they endure heavier sustained write loads and generate more heat under continuous NAS workloads. As a result, only listed M.2 models can be used for new cache or pool creation, though previously configured drives can still be migrated. Meanwhile, enterprise-oriented NAS lines such as the RS, FS, SA, and XS series continue to operate under stricter compatibility rules, where only officially listed drives can be used for new storage pool creation. In these systems, non-listed drives can sometimes be recognized for migration, but cannot participate in new arrays or cache volumes.

For most users, this means that DSM 7.3 on the 2025 Plus series finally restores the traditional Synology experience: the ability to use virtually any NAS-grade hard drive or 2.5-inch SSD without restriction. It also removes the previous generation’s unnecessary barriers that alienated long-term customers. Synology has positioned this change as a response to community feedback, reaffirming that flexibility can coexist with reliability. The HCL 5.0 framework is now the baseline for all new consumer and prosumer systems, signaling Synology’s partial return to an open and more user-friendly storage policy.

How Is Hard Drive Compatibility in DSM 7.3 on the Rackstation/RS and NVR/DVA Surveillance NAS Systems?

While the original restrictions are expected (though not wholy welcome) for enterprise-grade units, DSM 7.3 also applies similar limitations to rackmount Plus (RS+) and DVA/NVR models, which has generated frustration among users expecting parity with desktop Plus series devices. Systems such as the RS2423RP+, RS422+, and DVA1622 remain governed by a more conservative policy, where only drives on the compatibility list can be used for new pool creation, and unlisted HDDs are accepted only for migration. In contrast to the new, flexible policy introduced for 2025 DiskStation Plus models, these rackmount and surveillance systems do not yet benefit from the same relaxed rules. This distinction is particularly disappointing given that many surveillance-optimized HDDs—such as Seagate’s SkyHawk or IronWolf ranges—have not yet been verified by Synology for DVA or NVR units, leaving buyers with fewer officially supported choices despite these drives being purpose-built for similar workloads.

The DVA and NVR product lines further complicate matters because their operating environments rely heavily on consistent write performance and power management behavior. Synology’s internal reasoning is that drive validation for continuous surveillance recording requires more predictable I/O latency and lower error recovery times than typical NAS workloads. However, the practical impact is a reduced range of compatible disks, even when many third-party NAS or CCTV-specific drives are known to perform reliably under similar conditions. Until Synology expands its verification program to include these models, administrators deploying rackmount Plus or DVA systems must continue to rely exclusively on officially listed drives or accept limited migration-only functionality.

These restrictions highlight an ongoing inconsistency in Synology’s product ecosystem. DSM 7.3 offers broad flexibility and open drive use on desktop Plus series systems but maintains enterprise-grade rigidity across rackmount Plus and surveillance-focused models. For now, this gap means that users deploying DSM 7.3 on RS or DVA systems cannot benefit from the same simplified, user-friendly drive policy available to standard DiskStation Plus NAS units.

How Is Hard Drive Compatibility in DSM 7.3 on the FS, HD, SA, UC, XS+, XS, and DP Series?

In DSM 7.3, Synology continues to apply the most stringent validation rules across its enterprise and datacenter-class NAS platforms, which include the FS, HD, SA, UC, XS+, XS, RS, and DP series. These systems are built for environments where sustained uptime, predictable throughput, and long-term data integrity are non-negotiable. As a result, they rely entirely on Synology’s Enterprise Compatibility Framework, which only permits the use of drives that have been formally validated and listed on the official compatibility database. These listed drives undergo intensive reliability testing, including extended read/write stress cycles, multi-node redundancy simulations, and controlled recovery from power or network failures. DSM 7.3 enforces this framework to guarantee consistent behavior across RAID arrays and to ensure that firmware-level optimizations, such as error recovery timing and caching algorithms, work as designed with Synology’s proprietary storage stack.

For users of these enterprise models, drives fall into three possible states: listed, not listed, and incompatible. Listed drives are fully supported for installation, storage pool creation, caching, and migration. Drives that are not listed may still appear in Storage Manager but are limited to migration-only use, meaning they can be mounted if they come from an existing Synology system but cannot be initialized for new volumes or RAID groups. This allows data recovery or transition from legacy setups without granting full functionality. Meanwhile, drives on the incompatibility list are blocked entirely and cannot be used in any capacity. These restrictions are designed to prevent firmware mismatches or mechanical inconsistencies that could undermine array stability. In practice, this means that enterprise and rackmount models remain tied to the official drive ecosystem, often limited to Synology’s own HAT or HAS series drives or verified OEM equivalents.

In these product classes, DSM 7.3 also maintains a strict policy for cache and SSD usage. M.2 NVMe drives can only be used for caching or storage pools if they appear on the official compatibility list. Unlisted M.2 drives are detected by the system but cannot be assigned to any cache operation, even for testing purposes. Similarly, 2.5-inch SATA or SAS SSDs that are not verified cannot participate in new array creation, even though they may mount for migration. This conservative approach reflects Synology’s focus on maintaining data integrity over flexibility in its upper-tier systems, where downtime or data corruption can carry substantial business costs. DSM communicates these restrictions clearly during setup: any attempt to use an unsupported drive for new pool creation will trigger a warning explaining that the operation cannot proceed due to compatibility enforcement.

What are the benefits of Buying Synology-branded Hard Drives and SSDs?

In parallel with the policy adjustments introduced in DSM 7.3, Synology has also begun expanding a series of benefits and incentives aimed at customers who purchase Synology NAS systems together with Synology-branded storage media. These initiatives are part of the company’s ongoing effort to strengthen its vertically integrated ecosystem, ensuring optimal performance and reliability when all components come from the same source. In selected markets, buyers who purchase Synology HAT, HAS, or SAT series drives on the same invoice as their NAS hardware now receive extended warranty coverage of up to five years, administered directly through authorized distributors and resellers. In addition, Synology has introduced an Express Replacement program, allowing for immediate drive swaps during the warranty period without waiting for the defective unit to be shipped and inspected, effectively mirroring the convenience of a premium RMA service. These benefits are available at no extra cost when drives are purchased through approved channels. The initiative is designed to make Synology’s validated ecosystem more appealing to businesses seeking predictable lifecycle management and faster recovery in the event of hardware failure, while also providing an incentive for users to standardize on Synology-branded components rather than mixing third-party storage.

Head over to Blackvoid HERE to read Luka’s great write-up on DSM 7.3 below:

DSM 7.3 and Hard Drive / SSD Support Conclusion

DSM 7.3 might well represent the most comprehensive and transparent storage compatibility framework Synology has released to date (after years of obviscation and unclear messaging), but it also reinforces a clear divide between its consumer and enterprise platforms. The introduction of the HCL 5.0 policy marks a pragmatic shift from the heavily restricted DSM 7.1/7.2 model, restoring the flexibility that long-time users had relied on for more than a decade. On the 2025 DiskStation Plus series, users can once again install and operate any third-party NAS-grade HDD or SATA SSD without limitation, bringing back the open and adaptable system design that helped define Synology’s reputation. This balance between openness and validation shows the company’s recognition of user feedback and its effort to rebuild trust after widespread criticism of its earlier drive-locking policy. By maintaining full functionality for unlisted drives while still reserving strict validation for high-end hardware, DSM 7.3 offers a compromise that keeps consumer-grade systems practical and professional-grade systems predictable. Not ideal, but better than what was already in place.

However, DSM 7.3 also underlines the growing separation between Synology’s desktop Plus models and its rackmount Plus, DVA, and enterprise systems. While home and small-business users benefit from restored flexibility, administrators working with rackmount or surveillance solutions remain tied to tightly controlled drive lists. The continued exclusion of common NAS and NVR-grade drives—such as Seagate IronWolf and SkyHawk or WD Purple series—from the verified list limits adoption and drives up deployment costs, particularly for surveillance users who require high-capacity, continuous-write storage. Until Synology expands its validation program or aligns its rackmount Plus systems with the same drive-handling rules as its desktop equivalents, this divide will remain a sticking point. DSM 7.3 is therefore both a meaningful correction and a reminder that Synology’s storage policy continues to evolve in response to user pressure. It moves the platform back toward flexibility without abandoning its enterprise reliability philosophy, but the differences between product tiers are now more visible than ever.

Want to Support What We Do? Use the Links Below to Buy your NAS and/or HDD and SSD Media. Clicking these links will result in a small commission for anything you purchase, heading to me and Eddie @NASCompares and allows us to keep doing this! It’s just us two here and between this and ads, it’s the most passive way to keep us sailing! Thanks

Synology NAS and Media on Amazon – HERE Synology Products on B&H – HERE Seagate Ironwolf Media on Amazon – HERE WD Red Media on Amazon – HERE Seagate Products on B&H – HERE WD Products on B&H – HERE

---

 

 

 

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

Synology (FINALLY) Gives In to 3rd Party HDD Support in 2025 PLUS Series NAS

7/10/25 – Updated with information supplied by Synology on how verifications and product ranges will support different HDD/SSD in DSM 7.3

Of all the stories of 2025, very few had the level of impact on the NAS industry that the Hard Drive support policy change by Synology did. Arguably THE name in the world of turnkey NAS, Synology enjoyed a fairly spotless reputation up until recent years, but when their gradual first-party support stance took a very drastic acceleration in April 2025 with a complete lockout of HDDs from Seagate and WD for their 2025 generation of hardware, the industry responded very, very unfavourably (Ed – understatement of the YEAR). Over the months that followed, even some of the biggest tech platforms and consumer rights focused media outlets on the internet made damning statements about the brand’s actions, previously very Synology-friendly outlets either criticised the move or simply ceased covering Synology, and even typically heavily supportive Synology-associated platforms such as the Synology subreddit and yes even here at NASCompares were keen to highlight every inconsistent turn of this story. After six months of heavy fire, undoubtedly poor sales of the 7–8 released Synology 2025 generation hardware launches in that time (eg DS925+, DS1825+, DS425+, etc), repeated missteps by the brand in user engagement (such as disabling comments on videos, contradictory press statements and baffling justifications around hardware)… now… NOW the brand has announced that you will once again be able to use Seagate and WD Hard Drives on the Synology 2025 generation of devices – and importantly, this time without the level of shouted alerts and warnings. So, let’s discuss when this WD and Seagate Hard Drive media support is coming back, what are the limits, is this too little too late and whether all this was ever worth it for Synology.

When and How Will Third-Party Hard Drive Support Return to the 2025 Synology NAS?

Synology has detailed that third-party hard drive support will return to 2025 devices alongside the rollout of DSM 7.3, the next major update to the Synology software platform. Unlike previous statements earlier this year, this U-turn now means that Seagate and WD drives will not only be usable again but also with a significant reduction (possibly even complete removal – still awaiting exact testing of DSM 7.3 ourselves) from the constant “unverified drive” and “at risk” warnings that plagued users. This represents a return to the compatibility model users were familiar with before 2025. Exact rollout dates of the DSM 7.3 update are still pending (likely Q4 2025 or early Q1 2026), but this will mark the point where Synology’s 2025 NAS systems no longer block unsupported drives at installation. Until that update arrives and users proceed with it’s installation, Synology 2025 systems will of course still not allow unconfirmed media to initialise DSM. Likewise, it remains unclear how the update will interact with users who have already employed community scripts to bypass restrictions – whether these fixes will still be needed, or whether DSM 7.3 will overwrite them entirely.

Another important detail is how far this reinstated compatibility extends. According to Synology’s new position in the DSM 7.3 rollout, users will again be able to initialise DSM, create storage pools, volumes, run disk checks, expand pools, perform RAID repairs and create hot spare disks – essentially restoring the same functionality that was lost earlier this year. Crucially, the obtrusive warning messages that previously accompanied unsupported drives will be removed, which means the user experience should be indistinguishable from older Synology generations. Synology has stated that testing of specific Seagate and WD drives was still “ongoing” in the last 6 months, but this appears largely academic now, since DSM 7.3 will no longer enforce the same restrictions. Which brings into question the validity of those claims. In practice though, this means users can once again choose from the wider drive market, without fear of blocked features or disruptive alerts. It is still not 100% clear on what the position regarding M.2 NVMe SSDs and Storage Pool use will be, as well as if this is going to be completely brand wide – or just affecting the PLUS series new and old that are eligible for the DSM 7.3 update.

The Alerts and ‘Warnings’ that users have gotten used to up tll now (i.e pre DSM 7.3 roll out):

To confirm, the current 2025 systems that primarily this Synology U-turn on Hard Drive compatibility in DSM would affect are:

• Synology DS925+
• Synology DS1525+
• Synology DS725+
• Synology DS1825+
• Synology DS425+
• Synology DS225+
• Synology RS2825RP+

Previous PLUS series devices did not arrive with the exceedingly strict ‘no verified = no initialization’ rule that the above system’s had, so although these will benefit in DSM 7.3 with lessened warnings that they currently had, it is not the deal breaker proposition that it is/was in the x25 series.

However, let’s return to the point. Was ALL of this chaos by Synology worth it? Was there actually a coherent strategy in place here? Let’s discuss the damage that the last 6 months have caused.

What Happens When a User Installs a Hard Drive That Is Not on the Compatibility List but Is Not on the Incompatibility List Either?

Under DSM 7.3, Synology has overhauled how its NAS systems handle drives that are not officially listed in the compatibility database but are also not explicitly marked as incompatible. This new policy, part of the HCL 5.0 framework, restores the flexibility that was largely lost with DSM 7.2. For users of 2025 DiskStation Plus models, including systems such as the DS1525+, DS925+, and DS725+, these drives are now treated as fully functional and supported for installation, storage pool creation, and volume management. When a non-listed HDD or SATA SSD is installed in these units, DSM 7.3 accepts it without generating warnings, restrictions, or “unverified” messages. The drive behaves identically to a fully approved model, and users can create new RAID arrays, expand existing volumes, and use all standard DSM features such as snapshots, encryption, and Hyper Backup. This marks a significant shift from DSM 7.2, which blocked pool creation entirely if the installed drive was not verified by Synology.

The only distinction that remains is on the support side rather than the user interface. While DSM 7.3 operates normally with these drives, Synology’s technical support team may limit assistance for issues proven to be caused by non-listed hardware. This distinction allows experienced users to use mixed or legacy drives at their discretion while maintaining a clear boundary of responsibility. From a practical standpoint, performance, drive telemetry, and reliability monitoring remain fully available, including S.M.A.R.T. analysis, temperature reporting, and bad sector scanning. Storage pools built with these drives are indistinguishable from those using Synology-validated models, which means users can freely upgrade or migrate without worrying about feature loss.

The only exceptions to this open policy involve M.2 NVMe drives and systems outside the Plus, Value, or J series. NVMe SSDs used for caching or storage pools still require official validation because they endure heavier sustained write loads and generate more heat under continuous NAS workloads. As a result, only listed M.2 models can be used for new cache or pool creation, though previously configured drives can still be migrated. Meanwhile, enterprise-oriented NAS lines such as the RS, FS, SA, and XS series continue to operate under stricter compatibility rules, where only officially listed drives can be used for new storage pool creation. In these systems, non-listed drives can sometimes be recognized for migration, but cannot participate in new arrays or cache volumes.

For most users, this means that DSM 7.3 on the 2025 Plus series finally restores the traditional Synology experience: the ability to use virtually any NAS-grade hard drive or 2.5-inch SSD without restriction. It also removes the previous generation’s unnecessary barriers that alienated long-term customers. Synology has positioned this change as a response to community feedback, reaffirming that flexibility can coexist with reliability. The HCL 5.0 framework is now the baseline for all new consumer and prosumer systems, signaling Synology’s partial return to an open and more user-friendly storage policy.

How Is Hard Drive Compatibility in DSM 7.3 on the Rackstation/RS and NVR/DVA Surveillance NAS Systems?

While the original restrictions are expected (though not wholy welcome) for enterprise-grade units, DSM 7.3 also applies similar limitations to rackmount Plus (RS+) and DVA/NVR models, which has generated frustration among users expecting parity with desktop Plus series devices. Systems such as the RS2423RP+, RS422+, and DVA1622 remain governed by a more conservative policy, where only drives on the compatibility list can be used for new pool creation, and unlisted HDDs are accepted only for migration. In contrast to the new, flexible policy introduced for 2025 DiskStation Plus models, these rackmount and surveillance systems do not yet benefit from the same relaxed rules. This distinction is particularly disappointing given that many surveillance-optimized HDDs—such as Seagate’s SkyHawk or IronWolf ranges—have not yet been verified by Synology for DVA or NVR units, leaving buyers with fewer officially supported choices despite these drives being purpose-built for similar workloads.

The DVA and NVR product lines further complicate matters because their operating environments rely heavily on consistent write performance and power management behavior. Synology’s internal reasoning is that drive validation for continuous surveillance recording requires more predictable I/O latency and lower error recovery times than typical NAS workloads. However, the practical impact is a reduced range of compatible disks, even when many third-party NAS or CCTV-specific drives are known to perform reliably under similar conditions. Until Synology expands its verification program to include these models, administrators deploying rackmount Plus or DVA systems must continue to rely exclusively on officially listed drives or accept limited migration-only functionality.

These restrictions highlight an ongoing inconsistency in Synology’s product ecosystem. DSM 7.3 offers broad flexibility and open drive use on desktop Plus series systems but maintains enterprise-grade rigidity across rackmount Plus and surveillance-focused models. For now, this gap means that users deploying DSM 7.3 on RS or DVA systems cannot benefit from the same simplified, user-friendly drive policy available to standard DiskStation Plus NAS units.

How Is Hard Drive Compatibility in DSM 7.3 on the FS, HD, SA, UC, XS+, XS, and DP Series?

In DSM 7.3, Synology continues to apply the most stringent validation rules across its enterprise and datacenter-class NAS platforms, which include the FS, HD, SA, UC, XS+, XS, RS, and DP series. These systems are built for environments where sustained uptime, predictable throughput, and long-term data integrity are non-negotiable. As a result, they rely entirely on Synology’s Enterprise Compatibility Framework, which only permits the use of drives that have been formally validated and listed on the official compatibility database. These listed drives undergo intensive reliability testing, including extended read/write stress cycles, multi-node redundancy simulations, and controlled recovery from power or network failures. DSM 7.3 enforces this framework to guarantee consistent behavior across RAID arrays and to ensure that firmware-level optimizations, such as error recovery timing and caching algorithms, work as designed with Synology’s proprietary storage stack.

For users of these enterprise models, drives fall into three possible states: listed, not listed, and incompatible. Listed drives are fully supported for installation, storage pool creation, caching, and migration. Drives that are not listed may still appear in Storage Manager but are limited to migration-only use, meaning they can be mounted if they come from an existing Synology system but cannot be initialized for new volumes or RAID groups. This allows data recovery or transition from legacy setups without granting full functionality. Meanwhile, drives on the incompatibility list are blocked entirely and cannot be used in any capacity. These restrictions are designed to prevent firmware mismatches or mechanical inconsistencies that could undermine array stability. In practice, this means that enterprise and rackmount models remain tied to the official drive ecosystem, often limited to Synology’s own HAT or HAS series drives or verified OEM equivalents.

In these product classes, DSM 7.3 also maintains a strict policy for cache and SSD usage. M.2 NVMe drives can only be used for caching or storage pools if they appear on the official compatibility list. Unlisted M.2 drives are detected by the system but cannot be assigned to any cache operation, even for testing purposes. Similarly, 2.5-inch SATA or SAS SSDs that are not verified cannot participate in new array creation, even though they may mount for migration. This conservative approach reflects Synology’s focus on maintaining data integrity over flexibility in its upper-tier systems, where downtime or data corruption can carry substantial business costs. DSM communicates these restrictions clearly during setup: any attempt to use an unsupported drive for new pool creation will trigger a warning explaining that the operation cannot proceed due to compatibility enforcement.

What are the benefits of Buying Synology-branded Hard Drives and SSDs?

In parallel with the policy adjustments introduced in DSM 7.3, Synology has also begun expanding a series of benefits and incentives aimed at customers who purchase Synology NAS systems together with Synology-branded storage media. These initiatives are part of the company’s ongoing effort to strengthen its vertically integrated ecosystem, ensuring optimal performance and reliability when all components come from the same source. In selected markets, buyers who purchase Synology HAT, HAS, or SAT series drives on the same invoice as their NAS hardware now receive extended warranty coverage of up to five years, administered directly through authorized distributors and resellers. In addition, Synology has introduced an Express Replacement program, allowing for immediate drive swaps during the warranty period without waiting for the defective unit to be shipped and inspected, effectively mirroring the convenience of a premium RMA service. These benefits are available at no extra cost when drives are purchased through approved channels. The initiative is designed to make Synology’s validated ecosystem more appealing to businesses seeking predictable lifecycle management and faster recovery in the event of hardware failure, while also providing an incentive for users to standardize on Synology-branded components rather than mixing third-party storage.

Head over to Blackvoid HERE to read Luka’s great write-up on DSM 7.3 below:

Is it Too Little, Too Late? Is the Damage to the Synology Brand Already Done?

It’s a valid point. As mentioned in the intro, Synology has been a brand that, short of a few knocks along the way, has had a sterling reputation. Although their hardware has often been a little underwhelming, the software and services have been largely A1. But the move by Synology in restricting the use of drives from brands such as Seagate and WD burned A LOT of bridges. One cannot imagine that Western Digital or Seagate Technology were especially pleased by the rebuke either. The backlash was immediate and huge. Numerous sources I have spoken to in Europe and the U.S regarding Synology PLUS series sales (even for the 2023/22/21 ranges) confirmed the same sentiment: “Synology Diskstation sales were at a fraction of the previous year.” How much these support changes impacted enterprise solutions is unconfirmed, but given the number of sys-admins who quietly admitted to changing their buying plans, and sales teams who admitted recommending other vendors when Synology quotes became less competitive, the damage over the last 6 months has been palpable.

However, what about the next six months? Or the next 12 or 24? The timing of Synology’s disastrous hard drive support policy flip-flop could hardly have been worse. Alongside tech buyers (home and business) having tighter budgets due to rising costs, international trade tariffs being debated, new players entering the NAS industry, and rising expectations of what a system should do, Synology could not have chosen a worse moment for an unpopular policy. Many users who saw the way the policy was rolled out interpreted it as “the writing on the wall” and changed their stance on the brand. Some already jumped ship to alternative vendors, and others opted for older Synology hardware from pre-2025 ranges to avoid the lockout. For those buyers, the fact that the restrictions are now being removed will feel like a bitter twist – they could have had the newer hardware with the same freedom if they had simply waited a little longer.

How much of this shift can be attributed to public and media backlash is hard to quantify, but the scale of the U-turn speaks for itself. This is not the first time Synology has reversed course under pressure. Back in 2021/22, when DSM 7.0 introduced the earliest versions of its compatibility enforcement with red critical warnings, the outcry forced a retreat in DSM 7.1 to amber warnings instead (read here). History has now repeated itself on a much bigger stage. The difference is that this time, months of poor reviews, negative coverage, and lost sales will remain part of the public record, and Synology will struggle to erase that damage.

Much like QNAP and its long-running association with Deadbolt ransomware attacks, Synology may find that users do not easily forget this saga. For months, the internet has been awash with angry comments, critical reviews, and valid frustration at the brand’s direction. Even with DSM 7.3 restoring full drive freedom, the stigma of this six-month debacle will linger. Some users will never return. Others will approach Synology with renewed caution, mindful that the company could change course again in the future. The reaction from existing and potential Synology PLUS series NAS users was loud enough that I felt compelled to make two videos SPECIFICALLY because users were DM’ing and commenting about why I/NASCompares was continuing in our coverage of this brand:

Is the Synology DS925+, DS1825+, DS1525+, etc NAS OK to Buy Now?

As this change in unverified hard drive support policy by Synology seems to be rolled out in the DSM 7.3 update, that means that currently if you buy and deply a Synology x25 generation NAS, you will still be subject to the restricted HDD deployment status of DSM right now (i.e cannot initialize, cannot RAID build, Rebuild, hot spare, etc unless using a Synology labelled drive or one that eventually might arrive on the compatibility list). So, if you buy the new Synology DS925+, DS1825+ or DS1525+ – unless you were already going to buy Synology hard drive and SSD media, you won’t be able to do very much out the box! So, if you are only considering a Synology NAS right now IF it can be used with 3rd party and/or unverified storage media – DO NOT BUY until the DSM 7.3 update rolls out! You will just be wasting some of your 3 year included warranty whilst you wait!

HOWEVER –If/When you do wish to purchase a Synology NAS, please do use the links below in order to purchase your NAS. Doing so results in a small commission coming to me and Ed here at NASCompares, and it allows us to keep doing what we do here, and is the most frictionless and zero-cost way for you to support our articles, reviews, videos, guides, support systems and more.

Synology DS925+ NAS	Synology DS1525+ NAS	Synology DS1825+ NAS
Check Amazon in Your Region for the Synology DS925+ NAS	Amazon in Your Region for the Synology DS1525+ NAS @ $799	Amazon in Your Region for the Synology DS1825+ NAS @ $1149
heck B&H for the Synology DS925+ NAS	B&H for the Synology DS1525+ NAS @ $1149.99	B&H for the Synology DS1825+ NAS @ $1149.99

 

---

Below are further videos from over the course of the last 6+ months that cover the evolution of Synology and this controversial hard drive support policy.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

Is there a good reason for Synology to change the support of “Unverified Drives” in DSM?

Synology has long been regarded as one of the most user-friendly and reliable NAS brands in the market, balancing intuitive software with a wide hardware range that appeals to both home and business users. However, in recent years the company has taken an increasingly controversial path by enforcing strict compatibility requirements for hard drives and SSDs. Beginning with DSM 7 and escalating into the 2025 generation of devices, Synology now only certifies and supports its own branded storage media, effectively locking out many widely used alternatives from Seagate, Western Digital, and Toshiba. While Synology positions this move as a way to ensure system stability and consistency, the decision has sparked significant backlash among users who feel restricted in their options and burdened by higher costs. As competitors expand their ecosystems with more openness and flexibility, this proprietary approach risks damaging Synology’s reputation, raising questions about whether the company has prioritized profit margins over user choice.

What is the MAIN PROBLEM(s) with this decision by Synology?

The most immediate problem with Synology’s hard drive policy is the loss of flexibility that once made their systems so appealing. For years, customers could select from a wide range of industry-standard drives from Seagate, Western Digital, or Toshiba, tailoring storage to their budget, performance requirements, or regional availability. This freedom not only allowed users to balance cost and capacity, but also gave small businesses and home enthusiasts the ability to reuse existing drives, upgrade incrementally, or take advantage of promotions from different vendors. By restricting DSM compatibility to Synology-labelled drives, that flexibility is gone. For many users outside major markets, Synology’s drives are harder to source, priced higher than the competition, or limited in available capacities. What once felt like an open platform now increasingly resembles a closed ecosystem, where users must accept the vendor’s terms even if it means compromising on affordability or performance.

Another dimension of the problem lies in how Synology has communicated these changes, which many see as evasive or disingenuous. Officially, the company justifies the restriction as a move toward greater reliability and predictable system performance. The argument is that by narrowing the range of drives tested and supported, Synology can optimize DSM to work seamlessly with drives that have firmware tailored for its environment. In practice, though, the same underlying hardware often originates from Seagate or Toshiba, with only minor firmware adjustments and new branding. This creates a perception that Synology is overstating the technical benefits while quietly using the policy to secure higher margins. For long-time users, the contrast is stark: older models happily ran third-party drives with few issues, which makes the sudden insistence on “certification” seem less like an engineering requirement and more like a business maneuver. The result has been a significant erosion of trust between the company and its community.

The wider impact of this strategy has also been felt across the storage industry. Resellers have reported declining sales of Synology’s Plus series devices as customers explore alternatives such as QNAP, TrueNAS, or newer entrants like UGREEN and UniFi. For Synology, this shift is particularly damaging because its reputation has historically rested on attracting less technical buyers who value simplicity and reliability over DIY solutions. Now, even these entry-level and mid-range users are questioning whether they should commit to an ecosystem that limits their choice of drives and increases their costs. At the same time, hard drive manufacturers like Seagate and Western Digital are also affected, as Synology’s decision reduces the number of channels through which their products reach end customers. The ripple effect is therefore twofold: Synology risks alienating its base of loyal customers, while storage vendors lose a once-reliable partner, creating tension that could ultimately push more buyers toward competing NAS brands.

How Can Synology Solve This (if they want to)?

One path forward for Synology would be to adopt a hybrid compatibility model, where its own branded drives remain the recommended or default choice but third-party alternatives are still officially supported. This compromise has been proven by other vendors such as UniFi and QNAP, who sell their own labelled drives while maintaining compatibility lists for major manufacturers like Seagate, Western Digital, and Toshiba. By following this model, Synology could continue promoting the reliability benefits of its branded hardware without alienating customers who prefer flexibility. In practice, this would preserve a sense of choice for users while ensuring Synology can still highlight its “optimized” solutions as the safer, supported route.

 

 

Finally, Synology could address the availability and pricing concerns around its own branded drives. In many regions, these drives are either difficult to source or significantly more expensive than equivalent Seagate or Western Digital models. Improving distribution channels, ensuring consistent stock, and narrowing the price gap would make the transition more palatable to users who are willing to adopt Synology’s ecosystem but feel penalized by limited access. By focusing on accessibility and fairness rather than exclusivity, Synology could rebuild goodwill while still driving revenue from its hardware strategy. Taken together, these steps would not fully reverse the controversy but would demonstrate responsiveness and provide a clearer path to balancing stability, customer choice, and profitability.

Is there a way to FORCE a Synology NAS to accept unverified Hard Drives and SSDs in DSM?

For users unwilling to accept Synology’s restrictive stance on storage media, the community has developed reliable workarounds that re-enable full functionality for third-party hard drives and SSDs. The most widely adopted method involves injecting a script into the NAS system that bypasses DSM’s compatibility database, allowing otherwise unsupported drives to be used for installation, storage pools, caching, and expansion. Synology’s 2025 Plus-series models, such as the DS925+, block DSM installation if only unverified drives are present and issue constant warnings in Storage Manager. To overcome this, users first employ a Telnet-based flag during initial setup that tricks DSM into accepting the installation, followed by a more permanent fix applied through SSH. At the heart of this solution is Dave Russell’s (007revad) GitHub project Synology_HDD_db, which modifies DSM’s internal drive compatibility files. Once downloaded and executed via SSH, the script detects the NAS model, DSM version, and connected drives, then patches the system to treat them as officially supported.

The process is reversible, non-destructive, and works across multiple DSM versions, including DSM 7.2 and later. Additional features allow removal of persistent warning banners, full use of NVMe drives as storage volumes, and optional disabling of intrusive monitoring services like WDDA. To ensure ongoing stability, users can also configure a scheduled task in DSM’s Task Scheduler that re-applies the script at every boot, guaranteeing compatibility survives updates, reboots, or new drive insertions. While the script is robust and actively maintained, there are clear disclaimers: using it involves modifying system files, may void official Synology support, and should only be attempted by users confident with SSH and terminal commands who have reliable data backups. Nonetheless, for advanced users, system integrators, and enthusiasts, this community-driven solution has become the de facto method of restoring the freedom to use affordable and widely available third-party drives in modern Synology NAS systems.

Example of a 30TB Seagate HDD visible and functioning inside a Synology DS925+

Note – You can follow my guide on how to use this script modification (as well as outlining the pros and cons) HERE on the blog, or watch the video below:

The Future of Synology in the eyes of new and old buyers?

Synology’s decision to enforce exclusive support for its own branded hard drives and SSDs marks one of the most controversial shifts in the company’s history, transforming how both long-time customers and potential buyers view the brand. For over a decade, Synology’s appeal rested on a combination of intuitive software, solid hardware, and flexibility in allowing users to choose their own storage media from trusted vendors like Seagate, Toshiba, and Western Digital. By removing that choice in the 2025 generation, Synology has fundamentally altered the value proposition of its systems, making them appear less like open storage platforms and more like tightly controlled appliances. While the company justifies the policy by citing stability, predictability, and reduced support overhead, many users interpret it as a profit-driven attempt to push proprietary drives into the market, especially since these are often rebranded versions of third-party disks with modified firmware and higher price tags.

The backlash has been considerable, with resellers and community forums reporting falling interest in Synology’s Plus-series devices, particularly among home and small business users who previously embraced them for affordability and ease of expansion. Competing NAS providers such as QNAP, TrueNAS, UGREEN, and UniFi have been quick to capitalize on the discontent, positioning themselves as more open alternatives that maintain compatibility with industry-standard drives. At the same time, the growth of unofficial solutions like Dave Russell’s compatibility script demonstrates how determined users are to regain control over their hardware, even at the risk of voiding warranty or stepping outside official support. This dynamic reflects a widening gap between Synology’s official direction and the needs of its customer base, many of whom would prefer to accept a disclaimer about using unverified drives rather than being forced into a closed ecosystem.

Ultimately, Synology now stands at a crossroads that will define its reputation in the storage industry for years to come. If it continues to double down on a closed, proprietary model, the company may secure short-term revenue through drive sales but risks long-term damage to its image and market share. On the other hand, reintroducing a more flexible, transparent approach—such as allowing user consent for unsupported drives or improving global pricing and availability of its own disks—could restore trust and preserve its standing as the NAS brand of choice for both novices and professionals. The availability of community workarounds ensures that frustrated users are not entirely locked out of their systems, but the very existence of these tools highlights how far Synology has drifted from its once customer-first ethos. The next few years will be crucial, as the company either adjusts course and strikes a balance between profitability and user freedom, or risks ceding ground to rivals who are eager to embrace the openness Synology has chosen to leave behind.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

Use Whatever Hard Drives or SSDs on Your Synology NAS (2025 Guide)

Note – there is a YouTube tutorial version of this guide HERE on the NASCompares YouTube Channel

Synology’s 2025 generation of NAS systems, such as the DS925+ and other Plus series models, introduced a more restrictive approach to drive compatibility. Unlike previous generations, these devices enforce a compatibility check that blocks or limits functionality when non-Synology hard drives or SSDs are used. As a result, users are unable to install DSM, create storage pools, or configure caching volumes using unverified drives. Even drives that work in earlier Synology models are now flagged as unsupported, resulting in persistent alerts or outright refusal to function. This guide provides a complete walkthrough for users who want to bypass those restrictions and enable full usage of third-party SATA and NVMe drives, including for pools, volumes, hot spares, and cache. It includes step-by-step instructions on how to install DSM with only unverified drives, how to remove system warnings, and how to automate the process for future updates or drive additions. The solutions here rely on trusted scripts developed by the Synology community and require minimal system modification, allowing users to regain control over their own hardware.

Special Thanks to Dave Russell

The ability to bypass Synology’s restrictive drive compatibility checks would not be possible without the extensive work of Dave Russell, widely known in the Synology community as 007revad. His GitHub project, Synology_HDD_db, is the basis for all the procedures outlined in this guide. The script he developed modifies DSM’s internal compatibility database, enabling full functionality for otherwise unsupported HDDs, SSDs, and NVMe drives. Dave has not only written and maintained this complex script, but also ensured that it works across different NAS models and DSM versions, including DSM 7.2 and newer. He continues to improve the tool in response to Synology firmware changes, regularly providing updates and extended options such as M.2 volume support and WDDA disablement. Users are strongly encouraged to consult the official GitHub repository, follow the provided documentation, and, where possible, support his ongoing work HERE, which remains freely available to the broader NAS community.

MASSIVE Disclaimer

Modifying your Synology NAS to allow the use of unverified drives is not officially supported by Synology. By applying the changes described in this guide, you will be altering system files and bypassing built-in compatibility checks within DSM. While these changes are reversible and have been widely tested, doing so may void your Synology warranty or affect your ability to receive technical support from the manufacturer, even in cases unrelated to storage. Additionally, although the script-based method described here is non-destructive and has proven safe for many users, there is always a minimal risk of issues following DSM updates or hardware changes. You should not proceed unless you have full backups of your data and are comfortable with SSH and terminal operations. This guide is intended for advanced users, system integrators, or home NAS enthusiasts who understand the risks and accept responsibility for operating outside of official Synology support channels.

---

How to Set Up a Synology NAS with No Drives Installed to Allow DSM Installation

Synology’s 2025 and later Plus-series NAS systems will not allow DSM installation if only unverified drives are present. However, it is possible to bypass this limitation and install DSM without using any Synology-branded or officially supported drives. The method involves enabling Telnet access and overriding the drive compatibility check during the DSM installation process.

Step-by-Step Instructions:

• Physically set up your NAS

  • Connect the NAS to your local network using Ethernet.

  • Ensure the device is powered on, even if no drives are installed or only unverified drives are present.

• Attempt initial DSM setup

  • Use Synology Assistant or go to http://find.synology.com to locate your NAS.

  • Proceed through the DSM installation wizard. You will likely encounter an error indicating that the inserted drive(s) are unsupported.

• Enable Telnet access

  • In a browser, navigate to:
    http://<NAS-IP>:5000/webman/start_telnet.cgi
    Replace <NAS-IP> with the actual IP address of your NAS.

• Connect via Telnet

  • Open a Telnet client like PuTTY.

  • Enter your NAS IP address and connect via Telnet.

  • When prompted, use:

    • Username: root

    • Password: 101-0101 (default for this Telnet interface)

• Bypass installation check

  • Enter the following command into the Telnet window:

    while true; do touch /tmp/installable_check_pass; sleep 1; done


  • This creates a temporary flag that bypasses the system’s compatibility verification loop.

• Return to the DSM install page

  • Refresh the browser window where you began the DSM setup.

  • DSM will now allow installation to proceed, even on unverified drives.

• Finish DSM setup

  • Complete the DSM installation.

  • Create your admin user account when prompted.

  • You can now access the full DSM interface.

Once DSM is installed, you can proceed to apply the permanent drive compatibility fixes, create storage pools, and remove warning banners—all covered in the next section.

---

 

How to Allow Unverified HDDs or SSDs to Be Used for Storage Pools, Volumes, and Caching (and Remove Warnings)

Once DSM is installed, unverified drives will still be blocked from creating storage pools, volumes, or caches. Even if the system boots, Storage Manager will display warnings or greyed-out options. To unlock full functionality, you must apply a community-developed script that updates DSM’s internal drive compatibility database. This section outlines how to download, apply, and validate that change.

Step-by-Step Instructions:

• Enable SSH on your NAS
  • In DSM, go to Control Panel > Terminal & SNMP > Terminal.
  • Enable SSH service and click Apply.

• Prepare SSH access
  • Use PuTTY (or your preferred SSH client) to connect to your NAS.
  • Log in using your DSM administrator username and password (not root at this stage).
• Create working directory
  • Once connected, elevate to root:

    sudo -i
    

  • Create the required folder:

    mkdir -m775 /opt
    cd /opt
    

• Download the required scripts
  • Run the following commands to download the latest versions directly from Dave Russell’s GitHub:

    curl -O "https://raw.githubusercontent.com/007revad/Synology_HDD_db/refs/heads/main/syno_hdd_db.sh"
    curl -O "https://raw.githubusercontent.com/007revad/Synology_HDD_db/refs/heads/main/syno_hdd_vendor_ids.txt"
    chmod 750 /opt/syno_hdd_db.sh
    

• Run the script
  • Execute the script to patch the drive database:

    /opt/syno_hdd_db.sh
    

  • The script will detect your NAS model, DSM version, and connected drives. It will then add those drives to the compatibility database and back up the original files.

• Check Storage Manager
  • Return to DSM’s Storage Manager.
  • If changes are not immediately visible, reboot your NAS.
  • You should now be able to create storage pools, volumes, and SSD caches with unverified drives, without warning messages.
• Optional: Disable compatibility warnings completely
  • To stop future drive alerts from DSM, you may also want to run:

    /usr/syno/bin/synosetkeyvalue /etc.defaults/synoinfo.conf support_disk_compatibility no
    

At this point, all third-party drives currently installed in the system will be fully usable and recognized as supported. The next section explains how to add additional unverified drives later and have them automatically accepted.

---

 

What to Do When Adding New HDDs or SSDs Later for Expansion, Replacement, or Hot Spares

After your initial setup and database modification, any newly added unverified drives will still appear as unsupported in DSM until they are explicitly added to the modified compatibility database. This section outlines how to safely introduce new drives for RAID expansion, hot spare assignment, or disk replacement without encountering blockages or warning messages.

Step-by-Step Instructions:

• Physically install the new drive(s)
  • Power down your NAS if required (for systems that don’t support hot-swapping).
  • Insert the new unverified HDDs or SSDs into available bays.
  • Power the NAS back on and log in to DSM.
• Check Storage Manager
  • Go to Storage Manager > HDD/SSD.
  • Newly added drives will appear but will be marked as “Not supported” or “Unverified.”
  • They will not be usable for volume expansion or as hot spares until added to the compatibility list.
• Reconnect via SSH
  • Use PuTTY or your SSH client to log into DSM with your admin credentials.
  • Elevate to root access:

    sudo -i
    

• Navigate to the working directory
  • Assuming you previously created /opt and stored the script there:

    cd /opt
    

• Run the update script again
  • This re-applies the database patch and includes newly inserted drives:

    ./syno_hdd_db.sh

1. Verify drive status
   • Go back to Storage Manager.
   • Refresh the page or reboot the NAS if needed.
   • The newly added drives should now appear as compatible and can be used for expansion, drive replacement, or assigned as hot spares.

This process can be repeated anytime new unverified drives are introduced. However, to avoid having to manually re-run the script every time, the next section covers how to set up a scheduled task that automates this during every system boot.

---

 

How to Set Up a Scheduled Task to Re-Apply the Fix on Every Reboot

Synology DSM updates or certain system operations can overwrite or reset the internal compatibility database, especially after version upgrades or service restarts. To ensure that unverified drives remain recognized and fully functional even after a reboot, you can configure a scheduled task that automatically re-applies the compatibility script at every startup.

Step-by-Step Instructions:

• Log in to DSM and open Task Scheduler
  • Go to Control Panel > Task Scheduler.
  • Click Create > Triggered Task > User-defined script.
• Configure the general settings
  • Task Name: Name it something descriptive like Drive Compatibility Patch.
  • User: Select root from the dropdown (this is essential for full system access).
  • Event: Select Boot-up so the script runs every time the NAS starts.
  • Leave Enabled checked.

• Set the script action
  • Click on the Task Settings tab.
  • In the User-defined script box, enter the following command:

    mkdir -m775 /opt
    cd /opt || (echo "Failed to CD to /opt"; exit 1)
    curl -O "https://raw.githubusercontent.com/007revad/Synology_HDD_db/refs/heads/main/syno_hdd_db.sh"
    curl -O "https://raw.githubusercontent.com/007revad/Synology_HDD_db/refs/heads/main/syno_hdd_vendor_ids.txt"
    chmod 750 /opt/syno_hdd_db.sh
    /opt/syno_hdd_db.sh -e
    

  • This ensures the script is always downloaded fresh and applied with the -e flag for compatibility with scheduled tasks and email output (if enabled).
• Optional email notifications
  • Still under Task Settings, you can enable email alerts to be notified if the script fails or terminates abnormally.
• Save and test
  • Click OK to save the task.
  • You can manually run the task to confirm it executes correctly.
  • Reboot the NAS to ensure the script is applied at boot and unverified drives remain fully usable.

This scheduled task ensures long-term reliability and reduces the need for manual intervention whenever DSM is restarted, updated, or new drives are introduced.

---

Synology’s decision to restrict drive compatibility in its 2025 and later NAS models has complicated matters for users who prefer flexibility in their storage choices. However, through a combination of Telnet access, SSH scripting, and community-built tools like Dave Russell’s syno_hdd_db.sh, it is entirely possible to restore full drive functionality—even when using completely unverified SATA or NVMe devices. By following the steps outlined in this guide, users can install DSM on unverified drives, create storage pools, use SSDs for caching, and expand or modify their RAID configurations without limitations. Setting up an automated scheduled task further ensures these capabilities persist through reboots and DSM updates. While Synology may eventually broaden official support, this method provides a reliable and reversible way to maintain full control over your hardware today.

---

Should You Buy the Synology DS925+ NAS?

In practical terms, the DS925+ is the stronger out-of-the-box choice, especially for users who value simplicity, improved default performance, and do not anticipate needing higher-than-2.5GbE networking down the line. However, the long-term value proposition becomes murkier when you factor in the DS923+’s PCIe expansion, broader drive compatibility, and the potential price drops that will follow its ageing status in Synology’s lineup. In short, the DS925+ is the better NAS on day one—more powerful, faster, and quieter. But if you’re planning for day 1,000, it’s worth pausing to consider whether the expandability and media flexibility of the DS923+ may be a better fit for your storage and networking needs over the next five to seven years.

Synology DS925+ NAS		Synology DS923+ NAS
Check Amazon in Your Region for the Synology DS925+ NAS	Check B&H for the Synology DS925+ NAS	Check Amazon in Your Region for the Synology DS923+ NAS	Check B&H for the Synology DS923+ NAS

---

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

The Synology DS925+ versus QNAP TS-464 – Buy NEW or Buy QNAP?

Every so often in the NAS market, a new model arrives that challenges not just its predecessors but also its closest competitors. With the 2025 release of the Synology DS925+, buyers now face an interesting dilemma: go with Synology’s latest compact powerhouse, or choose QNAP’s TS-464—a device that has already proven itself since its release in 2022/2023 and offers a wide array of features at a competitive price. The DS925+ brings notable upgrades to CPU architecture, system memory scalability, and integration within Synology’s tightly controlled ecosystem. Meanwhile, the TS-464 has spent years benefiting from firmware maturity, PCIe expandability, and a more open hardware approach that appeals to power users and tinkerers alike. But which device is ultimately the better buy in 2025? Should you embrace Synology’s ecosystem with its newer, high-performance release, or does QNAP’s more versatile and budget-friendly offering still hold strong in the face of newer competition? Let’s dive into the details to help you decide which NAS deserves your next investment.

Synology DS925+ vs QNAP TS-464 – Hardware Specifications

When placing the 2025 Synology DS925+ alongside the 2022/2023 QNAP TS-464, one might expect the newer model to clearly dominate in every area. But hardware comparisons in the NAS market are rarely so simple. While both units are aimed at tech-savvy home users and small businesses looking for reliable, always-on storage solutions, their approaches to hardware—and the user needs they prioritize—are noticeably different. The DS925+ emphasizes streamlined performance, reduced noise, and integration within Synology’s tightly managed ecosystem. The QNAP TS-464, meanwhile, leans into raw hardware flexibility, DIY expandability, and a more open feature set for power users. Below is a detailed hardware breakdown of both NAS devices, showing where each shines and where compromises were made.

The DS925+ delivers a refined hardware experience out of the box, with its newer AMD Embedded Ryzen V1500B 4 Core/ 8 thread processor, dual 2.5GbE ports for faster LAN connectivity, and modern I/O including USB-C. It features two M.2 NVMe slots (for cache only, unless you use the Synology SNV3400 drives from Synology), dual memory slots supporting up to 32GB of ECC DDR4 RAM, and a compact metal chassis designed for quiet, efficient operation. It also runs cooler and quieter than many of its rivals, making it an ideal fit for environments where noise levels matter—such as living rooms, home studios, or small offices. This makes the DS925+ a “plug-and-play” NAS with premium internal components and minimal need for user intervention.

By contrast, the QNAP TS-464 takes a more modular, expandable approach. Powered by the Intel Celeron N5105/N5095 CPU (a quad-core processor with integrated graphics, but only 4 threads), it offers HDMI 2.0 output, two M.2 PCIe Gen3 x1 slots (which can be used for either caching or storage pools), and a PCIe Gen3 x2 slot for optional 10GbE or more M.2s, USB expansion, or even GPU cards. QNAP also includes dual 2.5GbE ports, putting it on par with the DS925+ in terms of network speed, but it edges ahead in overall hardware adaptability. Want multimedia output via HDMI? QNAP has it. Want to add NVMe storage pools or real-time transcoding? QNAP supports that too. That said, the TS-464 is based on a slightly older CPU architecture, lacks ECC memory support, and typically generates more fan noise under load. Additionally, its OS and ecosystem are broader in scope but often require more manual setup. Ultimately, the DS925+ is purpose-built for those who prioritize a quiet, polished, and simplified experience with modern performance. The TS-464, on the other hand, remains an excellent choice for users who prefer control, multimedia support, and greater hardware flexibility. Choosing between them largely depends on whether you value Synology’s stability and turnkey design, or QNAP’s freedom and potential.

AMD V1500B vs Intel N5105 – CPU Specifications (Synology DS925+ vs QNAP TS-464)

In any NAS system, the processor plays a pivotal role in determining the scope of functionality—whether it’s managing multiple concurrent users, running virtual machines, powering AI-driven applications, or simply handling encrypted transfers and background tasks efficiently. The Synology DS925+ and the QNAP TS-464 take noticeably different approaches in this regard. The DS925+ features the AMD Ryzen Embedded V1500B, a server-grade SoC designed for sustained multi-threaded workloads. The TS-464, on the other hand, runs on the Intel Celeron N5105, a more consumer-oriented chip that prioritizes integrated multimedia support and power efficiency. While both CPUs are quad-core, their architecture, instruction set, and target use cases diverge sharply—affecting not only raw processing, but also the capabilities unlocked within DSM and QTS/QuTS, respectively.

In terms of raw specs, the V1500B offers 4 cores and 8 threads with a base clock of 2.2GHz and support for ECC memory—a key advantage for mission-critical environments. This CPU is built for multitasking and thrives in scenarios involving virtual machines, container services, and intensive file indexing or backup operations. As a result, the DS925+ supports up to 8 concurrent virtual machines, 8 virtual DSM instances, and higher thresholds for connected users across Synology apps. It is better suited to offices or power users who rely on services like Synology Office, Drive, or Surveillance Station running in tandem. The system handles up to 150 Synology Chat users, 80 Office users, and 80 Drive users, offering excellent multitasking performance with low overhead.

The QNAP TS-464’s Intel N5105 is a 10nm Jasper Lake processor, also quad-core but without hyper-threading and with a slightly lower base clock (2.0GHz). However, it includes integrated Intel UHD Graphics, giving it one key advantage the DS925+ lacks: hardware-accelerated video transcoding via QNAP’s own QuMagie, Video Station, and especially Plex Media Server with support for on-the-fly 1080p and 4K decoding when paired with proper client-side licensing. This makes the TS-464 ideal for multimedia-heavy environments. Beyond media, the N5105 powers QTS and QuTS hero with access to QNAP’s broader and often more modular ecosystem. This includes Hybrid Backup Sync (HBS 3) for unified backup and disaster recovery, QuDedup for deduplicated snapshot replication, QVR Elite and QVR Pro for professional-grade surveillance (supporting multiple IP camera licenses natively), and AI Core features like face recognition and event detection when paired with the QuMagie or QVR Human apps. The TS-464 also supports Virtualization Station, enabling users to run lightweight Linux or Windows VMs with direct passthrough access to USB or PCIe devices, and Container Station, which offers both Docker and LXC container compatibility with GPU passthrough for NPU-based AI inference workloads. Thanks to the included PCIe Gen 3 x2 slot, the system supports optional upgrades like 10GbE NICs, QM2 expansion cards (for M.2 SSD or additional 2.5GbE/10GbE ports), or even Wi-Fi 6 cards, something entirely absent in the DS925+. Additionally, QNAP allows direct output to an external display via HDMI 2.0, enabling standalone use of HD Station apps like Chrome, LibreOffice, Kodi, and even Linux desktop environments — a feature highly prized in HTPC and security NVR deployments. Users can leverage Linux Station to run full Ubuntu VMs locally, or install Ubuntu Core through the App Center for custom development or edge AI inference scenarios.

Taken together, the TS-464 may not support the same high virtual machine/user count as the DS925+, but it compensates with a broader set of integrated appliances catering to power users, home labs, edge AI, and media-heavy deployments. It’s a more “tinker-friendly” platform, favoring flexibility and breadth over centralized system control and vertical integration. If you need an appliance that works across entertainment, security, and hybrid cloud workflows, with room for add-on functionality via hardware or apps, the TS-464 is hard to beat for the price. That said, the Synology DS925+ ultimately offers greater headroom for enterprise workflows, heavier VM usage, and large-scale hybrid deployments. It sacrifices media transcoding and graphical acceleration, but gains a server-class CPU that ensures consistent performance under heavier load conditions. Meanwhile, the TS-464 excels in edge-case versatility, offering more multimedia flexibility and richer expansion potential via PCIe. If your priorities lie in business-class performance, ECC memory support, and robust multi-user capacity, the DS925+ is the clear winner. But for media streaming, home lab tinkering, and a wider hardware feature set, the TS-464 remains a very compelling alternative.

Synology DS925+ vs QNAP TS-464 – Software Specifications

When it comes to NAS platforms, hardware is only half the story—what truly determines a system’s long-term value is the strength, maturity, and flexibility of its software. Synology’s DSM (DiskStation Manager) and QNAP’s QTS/QuTS Hero are two of the most advanced NAS operating systems available today, offering extensive suites of services for backup, virtualization, hybrid cloud, media streaming, and AI-assisted surveillance. But while both OS platforms cover similar ground, their design philosophies, application depth, and supported workloads differ substantially. The Synology DS925+ and QNAP TS-464, though comparable in price and both aimed at prosumers and SMBs, unlock very different software experiences depending on the deployment goals—be it centralized IT infrastructure, media-rich home labs, or container-based edge computing.

With the DS925+, Synology leans into its strength in unified management and vertical integration. DSM 7.2 is optimized for reliability, simplicity, and scalability within Synology’s ecosystem. The DS925+ supports up to 8 virtual machines and 8 Virtual DSM instances through Virtual Machine Manager, offers extensive group and user quotas, and enables full integration with Synology’s cloud services (such as Synology C2 Backup, C2 Identity, and Hybrid Share). Its higher hardware ceiling allows for more active users: 150 on Synology Chat, 80 on Synology Drive and Office, and up to 8 simultaneous VPN connections. Backup capabilities are similarly robust, with a higher threshold of shared folder sync tasks and superior support for incremental snapshot replication. Surveillance Station on the DS925+ supports up to 40 IP cameras and benefits from reduced CPU overhead during continuous recording, even while handling concurrent backup or media indexing operations. DSM’s elegant UI, consistent updates, and tightly integrated packages make it ideal for organizations that value centralized IT administration and long-term platform stability.

On the other hand, the QNAP TS-464 running QTS 5 or QuTS Hero offers a more open and modular software ecosystem. While the Intel N5105 CPU imposes lower multitasking ceilings than the V1500B, QNAP compensates with a broader set of feature-specific applications and customization paths. The TS-464 supports virtualization through Virtualization Station (for VMs) and Container Station (for Docker + LXC), and unlike the DS925+, can output video directly via HDMI 2.0—allowing the NAS to act as a standalone Linux desktop, NVR, or HTPC via HybridDesk Station. QNAP also differentiates itself with Hybrid Backup Sync (HBS3), which enables multi-destination sync, deduplicated backup via QuDedup, and real-time disaster recovery tools not found in DSM. QVR Pro and QVR Elite offer an expansive surveillance suite with optional AI-powered analytics (e.g., face recognition, people counting) when paired with compatible QNAP AI apps. The inclusion of ZFS with QuTS Hero (an optional OS for the TS-464) enables inline compression, self-healing file systems, and block-level snapshots, which can be critical for data integrity in business scenarios.

QNAP also encourages expansion through its App Center, which includes over 150+ native and third-party apps, from Node.js and GitLab to Home Assistant, Ubuntu Station, and even Mattermost for self-hosted chat. While the system supports fewer concurrent users and VMs than the DS925+, its strength lies in feature breadth and system-level flexibility. Add-ons like 10GbE NICs, QM2 SSD accelerators, or Wi-Fi 6 cards via PCIe further extend its versatility, especially for hybrid edge workloads or multi-role deployments that evolve over time. In short, the Synology DS925+ is designed for administrative simplicity and long-term scaling, excelling in consistent performance across multi-user deployments with deep DSM integration. The QNAP TS-464, meanwhile, is a powerful sandbox for customization, offering greater freedom, multimedia functionality, and third-party integration—at the cost of some operational polish and software limits. Choosing between them depends on whether your priorities lie in predictable enterprise-grade execution or a more adaptable, feature-dense platform.

Synology DS925+ vs QNAP TS-464 – Hard Drive and SSD Compatibility

In 2025, Synology has taken its most aggressive step yet toward locking down hardware compatibility, and nowhere is this more evident than in the DS925+. Following years of gradual restrictions—starting with warnings for unverified drives and progressing to default white-listing only Synology-branded media—the DS925+ now represents a firm line in the sand. At the time of writing, this system will not allow DSM initialization if it detects hard drives or SSDs that are not officially listed on Synology’s compatibility list. This list includes exclusively Synology HAT5300/HAT3310 HDDs and SAT5200 SSDs, with no third-party Seagate, WD, Toshiba, Samsung, or Kingston media currently supported. Regardless of drive quality or performance, unsupported models will be outright blocked during system setup. While Synology claims this guarantees optimal reliability and performance within DSM 7.2, the move drastically reduces flexibility for users and integrators alike.

In stark contrast, the QNAP TS-464 embraces an open compatibility philosophy. It supports virtually all major consumer and enterprise drives—from Seagate IronWolf and Exos, to WD Red, Red Plus, and Ultrastar, as well as Toshiba N300/X300 and Samsung/Kingston SSDs—up to 24TB per drive (or higher as of late 2025). QNAP also maintains a regularly updated compatibility list, but crucially, this list is advisory rather than mandatory. Users can install any 3.5″ or 2.5″ SATA HDD/SSD, and as long as it meets the physical and electrical standards, the TS-464 will initialize without issue. This means integrators, home users, or small businesses can reuse existing drives or select from the most cost-effective options in their region—something that’s increasingly difficult to do on newer Synology units. Moreover, QNAP allows mixing and matching of drive brands and capacities within the same storage pool (especially under QuTS hero’s ZFS environment), giving users granular control over redundancy, performance tuning, and cache layering with non-proprietary M.2 NVMe SSDs. This openness also applies to QNAP expansion units, many of which continue to work even with completely mixed-brand storage configurations—something Synology’s newer expansion policies have started to restrict.

For users in regions where Synology-branded media is expensive, hard to find, or simply not justified for non-critical applications, this policy shift on the DS925+ can be a deal-breaker. It positions the system closer to an appliance model, where Synology controls not only the hardware and software, but the storage medium itself. While that vertical integration may improve long-term reliability for some enterprise users, it’s difficult to reconcile with the broader DIY NAS community that values choice and modularity. Ultimately, this creates a philosophical divide: QNAP remains open, modular, and adaptable, trusting users to make informed decisions about their storage media. Synology, in contrast, is consolidating control, with the DS925+ exemplifying a move toward a closed ecosystem—potentially alienating users who previously praised DSM for its balance of simplicity and flexibility. Prospective buyers need to weigh not just performance and features, but how tightly they want to be tied to a single vendor’s hardware roadmap.

Synology DS925+ vs QNAP TS-464 NAS – Which Should You Buy?

The Synology DS925+ is a 2025 refresh designed with clear intent: push performance, tighten control, and streamline the out-of-box experience. In contrast, the QNAP TS-464—released in late 2022—is a Swiss Army knife of NAS flexibility, packed with customization options, open compatibility, and enough horsepower to meet the needs of both power users and small business deployments. Choosing between them ultimately comes down to what kind of NAS experience you’re after: a controlled, polished, and tightly integrated environment, or an open, adaptable, and hardware-friendly platform. On raw performance, the DS925+ has the edge. Its quad-core, 8-thread AMD V1500B CPU delivers higher throughput for multitasking, virtual machines, and heavier concurrent services, and DSM’s user/service thresholds are notably higher as a result. Add in dual 2.5GbE ports by default, and it’s clearly a step ahead of the DS923+ predecessor 1GbE-only base configuration, and you are looking at a healthy upgrade in several ways in this refresh. However, QNAP claws back ground with its PCIe Gen3 x2 slot, allowing 10GbE upgrades, Wi-Fi cards, and even GPU acceleration in select use cases—something Synology removed entirely from the DS925+. In QNAP’s favor is also its support for real-time hardware transcoding, HDMI 2.0 video output, and direct-attached monitor access—making it a better fit for media-centric environments where local playback, Plex, or Kodi usage matters.

Synology DS925+ NAS		QNAP TS-464 NAS
Check Amazon in Your Region for the Synology DS925+ NAS	Check B&H for the Synology DS925+ NAS	Check Amazon in Your Region for the QNAP TS-464 NAS	Check B&H for the QNAP TS-464 NAS

But perhaps the most significant dividing line is drive compatibility. The DS925+ will only initialize DSM with Synology-validated drives—locking out nearly all third-party HDDs and SSDs unless explicitly approved. This hardline stance means limited flexibility for users wanting to build using existing drives or regional market alternatives. Meanwhile, the TS-464 supports virtually all consumer and enterprise drives, from Seagate to Toshiba to Kingston, giving users total control over their storage budget and deployment roadmap. This open-ecosystem approach extends to M.2 NVMe usage too, where QNAP allows storage pool creation, caching, and tiering with off-the-shelf modules, while Synology restricts pool creation to only their branded NVMes. If you’re an IT administrator, content creator, or SMB looking for a polished, performance-forward NAS and you’re fully on board with Synology’s ecosystem—including its branded drives—then the DS925+ offers a streamlined, high-ceiling experience with excellent multitasking potential and cleaner UI/UX polish under DSM 7.2. But if you’re someone who values flexibility, upgrade paths, media support, or simply wants to control your storage choices without vendor lock-in, the QNAP TS-464 is an incredibly compelling alternative—offering strong performance for its price, an open architecture, and a deeper toolbox under QTS/QuTS Hero.

NAS Solutions	NAS Solutions
+ Better Software (In almost every respect!) + Much Better Global Support Presence + More business desirable + Larger Range of solutions – Compatibility restrictions on HDD and Upgrades More and more – Underwhelming hardware (comparatively)	+ Better Hardware for Price + Wider Variety of Solutions and Hardware Profiles + Supports ZFS and/or EXT4 (with ZFS platform now available on latest Intel Celeron Systems) + Wide accessory range and compatibility – Software can often feel inconsistent – Hit by Security Issues if the past
Check Amazon By Clicking Below:	Check Amazon By Clicking Below:

The Synology DS925+ is the better plug-and-play NAS for prosumers and SMBs who want a high-performance, low-maintenance experience—provided they’re comfortable buying into Synology’s tightly controlled ecosystem of software and storage hardware. On the other hand, the QNAP TS-464 remains the better choice for users who value flexibility, hardware freedom, and scalability—especially if media features, drive compatibility, or future upgrades are part of the plan. Ultimately, the DS925+ is the sharper tool, but the TS-464 is the more versatile one.

 

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE