UniFi MASSIVELY Scale up their NAS Portfolio with the UNAS Pro 8, UNAS Pro 4, UNAS 4 and UNAS 2

Note, the UNAS Pro 2 is NOW LIVE on the UniFi Store . The UNAS 4, UNAS Pro 4 and UNAS Pro 8 are now in the site, but are not available till October.

Ubiquiti is preparing to significantly broaden its NAS product line in late 2025 with the introduction of four new systems under the UNAS branding. The new lineup follows the launch of the original UNAS Pro in 2024, which gained attention as a low-cost, seven-bay rackmount appliance that introduced UniFi into the NAS sector. With the release of the UNAS 2, UNAS 4, UNAS Pro 4, and UNAS Pro 8, the company is moving into what it describes as its “phase two” of NAS development, aiming to cover both desktop and rackmount form factors while integrating closely with the wider UniFi ecosystem. This expansion arrives at a time when established NAS vendors are tightening drive compatibility and raising prices, leaving a gap for alternatives that emphasise affordability, simplified deployment, and ecosystem consistency.

The UNAS Pro 8 NAS

4-Core ARM, 16GB RAM, 3x 10GbE, 8x SATA Bays, 2x M.2 Bays (trays required), Redundant PSU (2nd Sold Seperately) $799 – HERE

The UNAS Pro 8 will serve as the top-end model of the range, positioned in a 2U rackmount chassis and built to deliver higher capacity and redundancy. It features eight front-facing 2.5″/3.5″ SATA bays alongside two rear-mounted M.2 NVMe slots, accessible through modular trays.

The Pro 8 is powered by a quad-core ARM Cortex-A57 processor running at 1.7 GHz and paired with 16 GB of LPDDR4 memory. Unlike many entry-level ARM systems, the Pro 8 includes three 10-gigabit network interfaces: two SFP+ and one RJ45 supporting multi-gig speeds down to 100 MbE. Redundant hot-swappable 550W PSUs are supported, though only one is included by default, with seamless failover tested successfully under load.

The system uses SGCC steel for the enclosure, weighs 11.5 kg, and includes rack rails in the box, a detail rarely seen in turnkey solutions. Performance tests have demonstrated sequential reads close to 850 MB/s on HDDs in RAID 5, with expectations of saturating a 10GbE link when using SSDs or RAID 0.

The UNAS 2 NAS

4-Core ARM, 4GB RAM, 1X 2.5GbE PoE+++, 2x SATA Bays, Power Over Ethernet delivery (PoE+++ Adapter Included) $199 – HERE

At the opposite end of the spectrum is the UNAS 2, UniFi’s smallest NAS to date. This desktop unit measures just 13.5 x 12.9 x 22.37 cm and weighs 1.3 kg, with a polycarbonate chassis designed to keep cost and weight down.

The device supports two 3.5″ SATA drives housed in a shared tray, a design that requires both drives to be removed together and does not permit hot-swapping. This approach raises concerns about handling healthy drives during replacement but reduces the mechanical complexity of the system.

The UNAS 2 runs on a quad-core ARM Cortex-A55 at 1.7 GHz with 4 GB of LPDDR4 memory. Networking is provided by a single 2.5 GbE RJ45 port, which also delivers PoE++ power, with a maximum system budget of 60W (52W for drives). A 60W PoE++ injector is included for users without a suitable switch. A 1.47-inch colour LCM display on the front provides status updates, though it is non-interactive. A USB-C port rated at 5 Gbps adds external storage capability, addressing an omission noted in the original UNAS Pro, but it does not support UPS integration or networking adapters.

The UNAS Pro 4 NAS

4-Core ARM, 16GB RAM, 10GbE, 4x SATA Bays, 2x M.2 Bays (trays required), Redundant PSU (2nd Sold Seperately) $499 – HERE

Between these two extremes sits the UNAS Pro 4, a 1U rackmount unit designed for users who want the resilience of redundant PSUs and NVMe support without committing to an eight-bay chassis.

It includes four SATA bays and two M.2 NVMe slots, sharing the same ARM Cortex-A57 CPU and 16 GB of memory as the Pro 8. Like its larger counterpart, it is built for rack environments where redundancy and compact form factor are key priorities.

While exact dimensions and weight have not yet been confirmed (with the UNAS 2 and UNAS Pro 8 being the main focus of this new launch), the design is expected to follow Ubiquiti’s established rackmount conventions. Its specification profile makes it an option for smaller businesses or branch offices that need rack integration but do not require the capacity of an eight-bay system.

The UNAS 4 NAS

4-Core ARM, 4GB RAM, 1X 2.5GbE PoE+++ (TBC), 4x SATA Bays, 2x M.2 Bays (trays required), Power Over Ethernet delivery (PoE+++ Adapter Included) $379 – HERE

The UNAS 4, meanwhile, extends the desktop line and mirrors the design philosophy of the UNAS 2 but doubles the bay count.

It provides four 3.5″ SATA bays along with two M.2 slots, making it the only desktop model in the range to support NVMe caching or tiered storage.

It retains the same ARM Cortex-A55 CPU and 4 GB of fixed memory as the UNAS 2, positioning it as a modest but slightly more versatile desktop option.

Like the smaller model, it uses PoE+++ for power delivery and 2.5 GbE for connectivity, though it remains unconfirmed whether it will also include a secondary network interface for failover or link aggregation. As with other desktop models, the chassis is constructed from polycarbonate, with compact dimensions intended for office or home use rather than data centre deployment.

UniFi Drive 3.3 Update?

Alongside the hardware announcements, UniFi will also release UniFi Drive 3.3, a major update to its NAS management software.

This version introduces expanded RAID configuration options, broader support for third-party cloud platforms, enhanced fan control, and improved analytical tools for monitoring system health and performance.

Snapshots and backups remain central features, with cloud and LAN targets supported, while the update also improves scheduling flexibility and introduces additional reporting features.

Although iSCSI remains absent, UniFi Drive continues to mature from the limited platform released with the first UNAS Pro, and the 3.3 update is expected to improve usability across the entire new range.

The introduction of these four models demonstrates Ubiquiti’s intent to build a full family of NAS solutions rather than rely on a single experimental release. By offering both rackmount and desktop systems at varying capacities, the company is positioning itself to compete more directly with established NAS vendors, albeit with a more streamlined and ecosystem-focused approach. The UNAS 2 and UNAS 4 are targeted primarily at existing UniFi users seeking simple storage that integrates seamlessly with PoE switches, while the Pro 4 and Pro 8 are built to appeal to businesses looking for redundancy, higher bay counts, and greater throughput. The use of ARM processors across the line reflects UniFi’s efficiency-first design, even though it places limits on heavy workloads such as virtualisation or multimedia transcoding.

Detailed performance reviews and comparisons of the new models are expected in the weeks ahead, assessing how each device performs within its target segment. Particular attention will focus on how the Pro units handle sustained 10GbE workloads with HDD and SSD configurations, how the PoE-driven desktop models cope with thermal and power constraints, and how UniFi Drive 3.3 stacks up against more mature operating systems. With Ubiquiti steadily fleshing out its NAS portfolio one year on from the first UNAS Pro, the company’s ability to deliver consistent updates and address early hardware and software limitations will determine whether it can establish a lasting position in the NAS market.

Join Inner Circle

Want to follow specific category? Also Read...UniFi UNAS Pro 8 ReviewUniFi UNAS 2 ReviewUniFi Launch the New UNAS 2, UUniFi UNAS Pro 8 ReviewUniFi UNAS 2 ReviewGL.iNet Comet Pro Review - TheGL.iNet Comet Pro ReviewWeek 33 Tech Roundup – TerraGMKTec G9 NAS (New Improved CoSeagate 30TB Ironwolf Pro and Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

Where to Buy a Product
			VISIT RETAILER ➤
			VISIT RETAILER ➤

If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

WE LOVE COFFEE

Or support us by using our affiliate links on Amazon UK and Amazon US

     

The UniFi UNAS Pro 8 NAS Review – The Difficult 2nd Album…

Note, the UNAS Pro 2 is NOW LIVE on the UniFi Store . The UNAS 4, UNAS Pro 4 and UNAS Pro 8 are now in the site, but are not available till October.

The UniFi UNAS Pro 8 is the latest rackmount NAS in Ubiquiti’s gradually expanding storage lineup and serves as a direct successor to the UNAS Pro released in late 2024. That earlier seven-bay system introduced UniFi’s first attempt at a prosumer-class NAS with 10GbE connectivity and integration into the UniFi ecosystem, but it was limited in scope by its unusual drive count, absence of fan control, and lack of redundant power options. The Pro 8 addresses many of those concerns by standardising the layout to a full eight 3.5-inch bays, adding dedicated M.2 NVMe slots, and adopting a 2U rackmount form factor with hot-swappable dual power supplies. It also includes a set of rails in the box, something not always seen in turnkey solutions of this scale.

From a technical perspective, the UNAS Pro 8 remains anchored to an ARM-based architecture, employing a quad-core Cortex-A57 processor at 1.7 GHz paired with 16 GB of non-upgradeable memory. This positions it differently from x86 alternatives from Synology or QNAP, limiting its scope for high-end virtualisation or transcoding tasks but keeping overall efficiency high. Network expansion is one of its more striking features, with three 10GbE connections — two SFP+ and one copper port — included by default, offering redundancy and multi-channel potential well beyond the capacity of eight SATA drives. Taken together with the dedicated M.2 NVMe caching support and optional redundant PSUs, the Pro 8 represents an incremental but deliberate step forward in UniFi’s second phase of NAS development.

UniFi UNAS Pro 8 Review – Quick Conclusion

The UniFi UNAS Pro 8 is a clear refinement over the first-generation UNAS Pro, standardising the design to eight bays, introducing hot-swappable dual PSU support, and improving cooling and fan control, while also including rack rails for easier deployment. It delivers solid storage functionality with RAID up to level 6, clustered pools, snapshots, encryption, and read/write caching via NVMe modules, though the caching remains limited to automated policies and the required trays are sold separately. Networking is unusually strong for an eight-bay ARM system, with three 10GbE interfaces providing flexibility for aggregation or failover, even if the storage media is unlikely to saturate that bandwidth. Performance testing showed read speeds close to 850 MB/s in RAID 5 with HDDs, with lower write speeds reflecting the ARM Cortex-A57 processor’s constraints, and SSD arrays would likely achieve closer to 10GbE saturation. The operating system has matured but remains more streamlined than established platforms, with no iSCSI, limited protocol support, and basic backup tools, making it more suitable for straightforward file storage than advanced workloads. Ultimately, the Pro 8 fits best for users already invested in UniFi infrastructure or those seeking a rackmount NAS with strong connectivity and efficiency, but it is not yet a direct alternative to feature-rich solutions from long-standing NAS vendors. That said, if you want an incredible value and solid ‘storage-focused’ rackmount NAS solution – this might well be one of the best examples in 2025!

BUILD QUALITY - 9/10

HARDWARE - 8/10

PERFORMANCE - 7/10

PRICE - 9/10

VALUE - 10/10

8.6

PROS

Multiple RAID Configurations supported, but also clustered RAID\'s and support of M.2 NVMes for Caching
M.2 Injection is unique, well thought out and easy to utilise for caching
THREE 10Gb/s PORTS (technically)! Kind of insane actually, for a 8x SATA drive machine
Dual PSU and Failover hugely welcome, after it\'s omission on the UNAS Pro 2024
16GB RAM out the box is a significant upgrade over the UNAS Pro from 2024
Benefits from almost a year of development of the UNAS Pro by UniFi, resulting in a much more complete solution in both hardware and software
Rackmount rails are included in the UNAS Pro 8 retail box, and are of a high quality
Exceptionally appealing price point
Supports complete network/local access if preferred, as well as full remote connectivity with the UI.com account and site manager services
Wide Hard Drives and SATA SSD Support (UniFi branded drives and those from 3rd parties such as Seagate Ironwolf, WD Red and Toshiba N300)
Ditto for the m.2 NVMe support, though you will need to m.2 adapter trays
Comprehensive network storage software in UniFi NAS OS and Drive.
Latest OS updates have included fan control, flexible RAID configurations, encrypted drive creation, customizable snapshots, more backup client choices/targets
\'Single Pane of Glass\' management and monitoring screen is very well presented!
One of the fastest to deploy turnkey NAS solutions I have ever personally used!

CONS

Lack of USB connectivity for convenient plug and share storage drives, network upgrades, 3rd party UPS support and more
Very modest base hardware, but understandable relative to the price
HDD injection is very unique, but prevents hot swapping
Still a lack of client applications native to the NAS services for Windows, Mac, Andoid and Linux
Shame about the LCD/LCM control panel being absent
M.2 NVMes are not usable for storage pools, just read/write caching - which is a shame, given the large network connectivity available here

You can buy the UniFi UNAS Pro 8 NAS via the link below – doing so will result in a small commission coming to me and Eddie at NASCompares, and allows us to keep doing what we do! 

UniFi UNAS Pro 8 Review – Design & Storage

The UNAS Pro 8 adopts a 2U rackmount form factor, measuring 442.4 x 480 x 87.4 mm and weighing 11.5 kg. The enclosure is constructed from SGCC steel, giving it a sturdy industrial build aimed at rack deployments rather than desktop placement. The system ships with rack rails included, which is uncommon among turnkey NAS appliances in this class, reducing the need for additional accessories when integrating it into an existing rack setup. The front panel presents a uniform layout of eight drive bays, standardising the design over the previous model’s unconventional seven-bay configuration and providing a more predictable arrangement for enterprise or prosumer storage planning.

Each of the eight bays supports both 3.5-inch and 2.5-inch HDDs or SSDs, with tool-less trays supplied for ease of installation. Drives slot in securely with a lockable motion, though there is no key-based locking mechanism on the trays themselves, limiting physical access protection. Installation is simple, with trays accommodating both large-capacity HDDs and smaller SSDs through included screws for 2.5-inch drives. While the bays can be partially populated for smaller-scale deployments, the absence of an expansion chassis option means users must fully plan around the eight-bay limit from the outset.

Cooling has been reworked compared with the earlier UNAS Pro. The system now features multiple fans with improved airflow across the drive bays and system board, supplemented by passive ventilation at the front and central areas of the chassis. Fan control has been integrated into the management software, allowing administrators to adjust fan speeds dynamically, a feature missing from the 2024 model. This provides more direct management of system acoustics and thermal balance, which is important given that high-density SATA arrays can run warm under sustained load.

In addition to the primary SATA storage, the rear of the chassis houses two M.2 NVMe slots. These are integrated into removable tray modules with thermal pads and heatsinks designed to dissipate heat from 2280 or 22110 length SSDs. However, the trays are not included by default, requiring a separate purchase if users wish to install their own NVMe drives.

The implementation is mechanically well thought out, but functionally limited: the NVMe drives can currently only be used for read and write caching.

They cannot be assigned to storage pools or volumes, restricting their utility for users seeking to leverage them as a high-speed tier alongside the eight SATA bays.

From a capacity perspective, the eight 3.5-inch bays allow the use of large modern drives, with confirmed compatibility during testing with 30 TB Seagate IronWolf units as well as UniFi-branded re-labelled Western Digital drives. The total maximum capacity therefore depends on the drives chosen, but the system power budget allocates up to 175W for drives, sufficient to support a full complement of high-capacity HDDs.

In practice, UniFi recommends their own labelled drives but does not enforce vendor lock-in, leaving flexibility for users to select from available NAS-grade HDDs and SSDs on the market. This more open stance is in contrast to the drive validation policies adopted by some established NAS vendors, and it provides an important degree of freedom in deployment.

UniFi UNAS Pro 8 Review – Internal Hardware

At the core of the UNAS Pro 8 is an ARM-based processor, specifically a quad-core Cortex-A57 running at 1.7 GHz. This architecture is consistent with UniFi’s approach in the earlier UNAS Pro, prioritising efficiency and lower power draw over raw computational performance. The choice of an ARM SoC means the device is well-suited for file storage, backups, and network-attached services, but it does not provide the same level of support for virtualisation, multimedia transcoding, or container workloads that x86-based systems can deliver. For users considering this system, the hardware direction underlines its positioning as a straightforward storage platform rather than an all-purpose server.

Memory is supplied in the form of 16 GB of LPDDR4, which is soldered to the board and cannot be upgraded. This is a relatively high baseline for an ARM-powered NAS, offering enough headroom for multi-user file access, caching operations, and handling larger RAID arrays without memory saturation. The allocation proved sufficient during array synchronisation tests, though high memory utilisation was observed when building an eight-drive RAID. This suggests the hardware has been provisioned carefully to meet expected workloads, albeit without scope for user expansion if requirements increase later.

The operating system is stored internally on dedicated flash storage, reported within the software as 25.2 GB, likely provisioned as a 32 GB module with some over-provisioning. This design ensures that installed drives remain fully dedicated to storage and that the system can boot independently of the data array. Storage management supports multiple RAID levels up to RAID 6, as well as clustered RAID groupings, providing some flexibility for mixed drive sizes. Combined with hot-swap support and optional failover protection through dual PSUs, the hardware configuration strikes a balance between basic efficiency and the inclusion of some enterprise features.

UniFi UNAS Pro 8 Review – Connectivity & Throughput

The UNAS Pro 8 is equipped with three 10-gigabit network interfaces, consisting of two SFP+ 10G ports and one RJ45 10GbE port with multi-gigabit fallback to 5G, 2.5G, 1G, and 100 MbE. This level of connectivity is notable for a system limited to eight SATA bays, as even high-performance HDDs or SSDs in aggregate are unlikely to saturate more than a single 10GbE link under typical workloads.

While the inclusion of three ports may appear excessive, the arrangement allows for link aggregation, redundancy, and separation of traffic across multiple networks. In practice, this provides administrators flexibility in how the NAS integrates with existing switching hardware, though the real-world performance ceiling remains constrained by the storage media.

Power connectivity is handled through two hot-swappable AC/DC 550W power modules, though only one is included in the base configuration. Installing a second unit enables redundancy, ensuring uninterrupted operation in the event of PSU failure. Testing confirmed seamless failover when one module was removed during sustained read/write operations, with no observable disruption in data availability. However, the absence of USB or UPS integration ports limits external redundancy options, leaving users reliant solely on the dual-PSU configuration for power protection.

In terms of general I/O, the device is closed in design, with no USB ports, HDMI output, or PCIe expansion available. This reflects UniFi’s approach of positioning the system as a dedicated, self-contained appliance managed exclusively via network interfaces and the UniFi OS console. While this reduces versatility for use cases such as direct-attached backups or third-party hardware upgrades, it aligns with the brand’s ecosystem-driven philosophy.

Performance testing with eight 8TB drives in a RAID 5 configuration produced throughput in the region of 800–850 MB/s during sequential read operations. Write speeds were lower, reflecting both the RAID type and the limitations of the ARM Cortex-A57 processor, but still sufficient for multi-user file access and standard NAS workloads. Tests with larger 30TB Seagate IronWolf drives confirmed compatibility, though extended stress testing was not undertaken. With SATA SSDs or a RAID 0 array, the system would likely be capable of saturating a single 10GbE connection, though fully exploiting the three available ports remains unrealistic under the current hardware constraints.

The inclusion of two M.2 NVMe slots, limited to use as read/write cache, provides some performance enhancement. Caching can accelerate frequently accessed data reads or speed up ingest of new data before it is written to the HDD array. However, the caching mechanism is automated, with no user control over cache policies, and the NVMe drives cannot currently be used for storage pools. During operation, thermal imaging recorded SSD module temperatures in excess of 50°C, indicating adequate but stressed cooling under load. This reinforces the importance of active fan management, now included in UniFi’s updated software.

• Networking: 2 x 10G SFP+, 1 x 10GbE RJ45 (5G/2.5G/1G/100M supported)

• Power Supply: 2 x 550W hot-swappable AC/DC modules (1 included)

• Management: Ethernet and Bluetooth 4.1 setup/admin

• Other I/O: None (no USB, HDMI, or PCIe expansion)

• Drive Support: 8 x 2.5″/3.5″ SATA HDD/SSD, 2 x M.2 NVMe (cache only)

• Tested Performance: ~800–850 MB/s sequential reads (RAID 5, HDDs)

• Write Performance: Lower than reads, limited by ARM CPU overhead

• Cache Functionality: NVMe SSDs limited to automated read/write caching

UniFi UNAS Pro 8 Review – Software and Services

The UNAS Pro 8 runs on UniFi’s NAS management platform, designed to integrate with the broader UniFi ecosystem while remaining usable as a standalone system. Administration can be carried out through the UniFi OS console in a web browser or via the ui.com cloud portal, with optional remote access that can be enabled or disabled depending on security requirements.

The platform aims to provide a single interface for storage management, user access, and system monitoring. It is less feature-rich than mature alternatives such as Synology DSM or QNAP QTS, but it retains a streamlined design that prioritises ease of setup and centralised administration.

Storage management supports common RAID levels up to RAID 6, with the additional ability to cluster groups of drives into combined pools. Snapshots are available at the folder level, allowing users to roll back to earlier revisions of files. Encryption is supported, requiring a password to mount encrypted volumes after reboot, which ensures data protection in the event of device theft or unauthorised access.

NVMe SSDs can be assigned to caching, though as noted earlier, they cannot be added to storage pools. File access is available through SMB and NFS, but the range of supported protocols is narrower than on established NAS operating systems.

Backup functionality is split into two categories: system configuration backups and file-level backups. System configuration backups can be stored locally or uploaded to a ui.com account, allowing settings and structures to be restored to the same or another UniFi NAS device.

File-level backups extend to cloud services and other NAS units, with support for scheduled routines and basic rules such as overwrite or versioned backups. Cloud integration is functional but limited compared to established platforms, and external synchronisation features such as continuous sync or third-party plug-ins are not yet available.

User management is relatively straightforward, with the option to bind accounts to the wider UniFi ecosystem or create standalone local users. Access can be restricted to LAN-only connections, while two-factor authentication is available through UniFi’s identity and verification tools. At present, some advanced functions common to other platforms, such as iSCSI target creation or scheduled power management, remain absent.

The software continues to evolve, with updates adding features incrementally, but its current focus is on providing reliable core storage, backup, and access management rather than competing directly with the broad feature sets of long-established NAS vendors.

UniFi UNAS Pro 8 Review – Verdict and Conclusion

The UniFi UNAS Pro 8 represents a measured but important step forward compared with the earlier UNAS Pro model released in 2024. By moving to a uniform eight-bay arrangement, it avoids the odd seven-bay design that limited the practicality of the previous system and brings it in line with industry expectations for rackmount storage. The addition of dual hot-swappable power supply modules, though only one is supplied by default, introduces a level of redundancy that was absent in the earlier generation and proved reliable during testing with seamless failover. Improvements to cooling and fan control further distinguish it, with administrators now able to actively manage system noise and temperature rather than relying on fixed presets. UniFi has also bundled rack rails and a robust accessory kit, which simplifies installation and deployment. At the same time, the reliance on an ARM Cortex-A57 processor keeps the platform efficient but restricts its performance ceiling, limiting its suitability for high-throughput tasks such as large-scale virtualisation, multimedia transcoding, or environments where sustained multi-gigabyte per second throughput is essential.

On the software side, UniFi’s NAS operating system has matured since the first-generation release but still prioritises simplicity over feature breadth. The UNAS Pro 8 includes key storage capabilities such as RAID up to level 6, clustered pools, snapshots, encryption, and read/write caching via the rear-mounted NVMe modules. However, those same M.2 slots remain limited to caching only, and the trays required for installation must be purchased separately, which may be seen as an unnecessary barrier. Network protocol support is limited to common services such as SMB and NFS, with no iSCSI implementation, reducing its appeal for professional editing environments or enterprise applications that depend on block-level storage. Cloud and LAN backups are supported with basic scheduling and rules, but the absence of broader synchronisation features or third-party integration keeps it behind more mature platforms. The Pro 8 therefore delivers dependable core NAS functions but does not yet challenge the established ecosystems of Synology or QNAP. For organisations already invested in UniFi’s infrastructure or those requiring a straightforward rackmount storage system with multiple 10GbE connections, it offers a compelling option, but it remains best suited to use cases focused on file storage and backup rather than advanced workloads.

You can buy the UniFi UNAS Pro 8 NAS via the link below – doing so will result in a small commission coming to me and Eddie at NASCompares, and allows us to keep doing what we do! 

Join Inner Circle

Want to follow specific category? Also Read...UniFi Launch the New UNAS 2, UUniFi UNAS 2 ReviewUniFi Launch the New UNAS 2, UUniFi UNAS Pro 8 ReviewUniFi UNAS 2 ReviewGL.iNet Comet Pro Review - TheGL.iNet Comet Pro ReviewWeek 33 Tech Roundup – TerraGMKTec G9 NAS (New Improved CoSeagate 30TB Ironwolf Pro and Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE

The UniFi UNAS 2 NAS Review – Value vs Scale

Note, the UNAS Pro 2 is NOW LIVE on the UniFi Store . The UNAS 4, UNAS Pro 4 and UNAS Pro 8 are now in the site, but are not available till October / Q4 2025

The UniFi UNAS 2 is a compact, entry-level two-bay desktop NAS introduced as part of Ubiquiti’s second phase of NAS development, following the debut of the UNAS Pro in 2024. That earlier seven-bay rackmount system was notable for its low $499 price and integrated 10GbE connectivity, but it had an unconventional design, limited fan control, and no support for USB expansion. By contrast, the UNAS 2 shifts away from rackmount hardware and into the desktop market, adopting a much smaller form factor and prioritising simplicity over raw performance. Measuring 13.5 x 12.9 x 22.37 cm and weighing only 1.3 kg, it is one of the smallest systems in the UniFi NAS range and is constructed from polycarbonate rather than steel, reinforcing its role as an affordable, lightweight device.

The hardware is designed primarily for modest storage requirements, supporting two 3.5-inch hard drives with a maximum combined power budget of 52W and an overall consumption ceiling of 60W. The device operates on a single 2.5 GbE RJ45 interface, which also functions as a PoE++ input, removing the need for a conventional power supply unit but requiring either a compatible PoE++ switch or the included 60W injector. This approach marks a clear departure from the UNAS Pro, which included a standard power connector and optional redundancy through additional PSU modules. In practice, the reliance on a single port for both power and data streamlines installation within UniFi networks, but it also introduces a single point of failure and reduces flexibility compared with larger systems.

UniFi UNAS 2 Review – Quick Conclusion

The UniFi UNAS 2 is a compact, entry-level NAS that prioritises simplicity and integration within the UniFi ecosystem over flexibility or raw performance. Its use of PoE++ for both power and connectivity makes installation straightforward in environments with compatible UniFi switches, but it introduces reliance on a single port and limits deployment outside that infrastructure, even with the included injector in the retail kit. The system supports two 3.5-inch drives in a shared non–hot-swappable tray, with RAID 0, RAID 1, or single-disk setups available, but there is no option for expansion or NVMe caching. Hardware consists of a quad-core ARM Cortex-A55 processor with fixed 4 GB of LPDDR4 memory, which is efficient but imposes clear limits on throughput and application scope. Performance testing produced read speeds up to 260 MB/s and writes in the 160–180 MB/s range, sufficient for the 2.5 GbE interface but reflective of the modest hardware and thermal constraints, with CPU temperatures often approaching 80°C under load. Software provides a clean interface with snapshots, RAID tools, backups to other UniFi NAS or cloud services, and user management tied to UniFi identity, but features such as iSCSI, encryption, and granular backup rules are absent. As a result, the UNAS 2 is best suited as a secondary or edge storage device, particularly for UniFi users seeking easy integration, but it lacks the scalability and depth of established NAS platforms needed for primary or enterprise deployments.

BUILD QUALITY - 9/10

HARDWARE - 7/10

PERFORMANCE - 7/10

PRICE - 10/10

VALUE - 9/10

8.4

PROS

Benefits from almost a year of development of the UNAS Pro by UniFi, resulting in a much more complete solution in both hardware and software
Exceptionally appealing price point
Extremely low impact (power use, noise level, physical scale all great)
Introduction of USB C 5Gb/s Connectivity is very welcome
Supports complete network/local access if preferred, as well as full remote connectivity with the UI.com account and site manager services
Wide Hard Drives and SATA SSD Support (UniFi branded drives and those from 3rd parties such as Seagate Ironwolf, WD Red and Toshiba N300)
Comprehensive network storage software in UniFi NAS OS and Drive.
Latest OS updates have included fan control, flexible RAID configurations, encrypted drive creation, customizable snapshots, more backup client choices/targets
\'Single Pane of Glass\' management and monitoring screen is very well presented!
One of the fastest to deploy turnkey NAS solutions I have ever personally used!

CONS

Single network port, though not a dealbreaker (as this is still just 2x SATA throughput), is not great in terms of a network failover or in deployment of SATA SSDs
Choice of PoE deployment unusual and limits some deployments
USB C connectivity does not support network adapters, NAS expansions or 3rd party UPS devices
Very modest base hardware, but understandable relative to the price
HDD injection is very unique, but it prevents hot swapping
Still a lack of client applications native to the NAS services for Windows, Mac, Android and Linux

You can buy the UniFi UNAS 2 NAS via the link below – doing so will result in a small commission coming to me and Eddie at NASCompares, and allows us to keep doing what we do! 

UniFi UNAS 2 Review – Design

The UNAS 2 adopts a small desktop form factor, measuring 135 x 129 x 223.7 mm and weighing 1.3 kg. Its enclosure is constructed from polycarbonate, which makes it lighter and less industrial than the steel-based rackmount models in UniFi’s NAS range. The compact build is suited for environments where space is limited, and it operates within an ambient temperature range of -5 to 40°C and a humidity tolerance of 10–90% non-condensing. With only two drive bays, the UNAS 2 positions itself as an edge device for simple storage and backup, rather than a primary data management system.

Drive installation is handled through a single removable cage that holds both 3.5-inch drives. Each drive clips into place using a shared tray design, with both units inserted in opposite orientations to align with the SATA connectors. While this arrangement is functional, it has some limitations.

There is no support for hot swapping, meaning the system must be powered down before drives can be replaced. Additionally, the shared cage design requires both drives to be handled together, which increases the risk of disturbing a healthy drive when removing or replacing a failed one.

Cooling is managed by a small fan located at the rear, supported by passive ventilation channels at the base of the unit. Air is drawn in from underneath and expelled from the top section, ensuring airflow across the drives and the system board. Thermal tests recorded CPU temperatures in the range of 75–80°C during higher utilisation, with the chassis surface reaching around 39–50°C depending on workload.

The fan is adjustable via UniFi’s management interface, offering a choice between balanced operation and higher cooling at the expense of noise.

Noise levels ranged from 31–32 dBA in idle to 35–38 dBA under load, influenced heavily by the vibration of installed drives.

At the front of the unit, UniFi has integrated a 1.47-inch colour LCM display for system information. This provides basic details such as network status, storage health, and system alerts, but it is not touchscreen and cannot be used for configuration.

The lack of interactive control means that most management tasks still need to be handled through the UniFi OS console. LED indicators are also present for system status, and a physical locking mechanism is built into the drive cage, preventing accidental removal.

From a storage perspective, the UNAS 2 supports standard RAID configurations for two drives, namely RAID 0 and RAID 1, in addition to single-disk setups. Given the limitations of two-bay devices, RAID 1 is the most practical option, prioritising data protection over capacity.

The system officially supports large-capacity HDDs, with tests confirming compatibility up to 30 TB drives. However, there is no expansion capability through additional enclosures, and the single USB-C port on the front is limited to attaching external drives for storage or backups. This means users are confined to the internal two-bay maximum, making long-term planning important for deployment.

UniFi UNAS 2 Review – Internal Hardware

The UNAS 2 is built around a quad-core ARM Cortex-A55 processor clocked at 1.7 GHz. This CPU architecture is designed for efficiency rather than high computational output, which makes it suitable for low-power storage operations, but less capable for advanced workloads such as virtualisation, heavy encryption, or on-the-fly media transcoding.

During testing, CPU temperatures generally remained in the 75–80°C range under sustained use, dropping closer to 50–60°C when idle or under light activity. While these figures fall within operating limits, they reflect the modest cooling design of the enclosure and the limited thermal headroom of the ARM-based hardware.

The device includes 4 GB of LPDDR4 memory, which is soldered to the board and cannot be expanded. This fixed allocation is sufficient for handling RAID 1 synchronisation, snapshots, and standard multi-user file operations, but it sets a ceiling on the system’s multitasking capability.

Unlike larger UniFi NAS models that feature 16 GB of memory, the UNAS 2’s hardware is intended only for light to moderate workloads. Memory use during testing reached high utilisation during RAID synchronisation but did not exceed available capacity, suggesting that UniFi has provisioned enough for the intended use case, while keeping the system constrained to its role as an entry-level solution.

The operating system is stored internally and runs independently of the installed drives, leaving both bays available for data. This separation ensures that the system can still boot even if both drives are removed or replaced. Storage management is limited to the basic RAID levels supported by two-bay systems, and no M.2 NVMe slots are included for caching or tiered storage, a feature reserved for larger UniFi NAS models. As such, the internal hardware of the UNAS 2 reflects its role as a secondary or edge device, designed primarily for straightforward storage and backup within a UniFi-managed network.

UniFi UNAS 2 Review – Connectivity & Performance

The UNAS 2 relies on a single 2.5 GbE RJ45 port for both data and power, with PoE++ providing up to 60W of combined budget. This integration reduces cabling and eliminates the need for an external power brick, but it introduces a single point of failure. That said, the UNAS 2 retail kit DOES include a PoE mains adapter, so ultimately the end user does have the option of deploying in a traditional manner (though power and network connectivity are still funnelled into the same connector).

If the cable or port fails, both power and connectivity are lost. A 60W PoE++ injector is included in the package for users without a compatible PoE++ switch, but this approach remains less flexible than traditional dual-port NAS designs. There is no secondary network interface, Wi-Fi connectivity (rare in a system of this scale, but would allow for failover if it was), support of a USB network adapter or option for link aggregation, which makes the system dependent on one connection for all network and power needs.

In addition to the Ethernet port, the front of the device includes a USB-C interface rated at 5 Gbps. This provides the ability to attach external storage devices, enabling data import, backups, or temporary storage expansion. However, the USB port is limited to storage and does not support network adapters, UPS integration, or official expansion enclosures. While the addition of USB-C addresses one omission from the UNAS Pro, its functionality is constrained and focused solely on external drive access.

Network throughput reflects the limitations of a dual-drive ARM-based NAS. In testing with two 8TB HDDs in RAID 1, sequential read speeds reached around 260 MB/s, while write speeds varied between 160–180 MB/s depending on workload. Benchmarks such as AJA and CrystalDiskMark confirmed this pattern, with read performance consistently higher than write due to the processor’s handling of RAID and data caching. These figures make effective use of the 2.5 GbE interface but leave no capacity to challenge higher multi-gigabit standards.

Power consumption aligns with UniFi’s published specifications, averaging 16–17W in idle, 18–20W during light activity, and 23–24W under heavier use. Peak usage during sustained transfers with RAID synchronisation reached approximately 25W, well below the 60W ceiling. Thermal monitoring showed the CPU rising toward 79–80°C under stress, though the chassis fan helped bring temperatures back into the 50–60°C range once load reduced. These results indicate that while the system operates within its defined limits, sustained workloads push the ARM processor and cooling system close to their maximum operating range.

Noise levels were modest, with idle operation producing around 31–32 dBA and workloads raising this to 35–38 dBA. The shared dual-drive cage design contributed to additional vibration, particularly when placed on a hard surface. Rubberised feet help dampen this effect, but vibration noise was noticeably reduced when the device was placed on softer material such as foam. Overall, while the system remains relatively quiet, its acoustic profile is closely tied to the drives selected and the surface it rests on.

• Network Interface: 1 x 2.5 GbE RJ45 (PoE++)

• USB Ports: 1 x USB-C (5 Gbps, storage only)

• PoE Power Budget: 60W (52W available for drives)

• Power Supply: 60W PoE++ injector included

• Max Consumption: 60W (typical 16–25W during use)

• Tested Performance: ~260 MB/s reads, 160–180 MB/s writes (RAID 1, HDDs)

• Noise Levels: 31–32 dBA idle, up to 38 dBA under load

• Temperature Range (Observed): 75–80°C CPU under stress, 50–60°C idle/light use

UniFi UNAS 2 Review – Software and Services

The UNAS 2 runs on UniFi’s NAS management platform, which follows the same single-pane-of-glass interface design seen in the UNAS Pro and UNAS Pro 8. Administration is carried out via a web browser or through a ui.com account, with the option to disable cloud access and operate the system entirely on a local network.

The interface consolidates system status, storage health, user accounts, and backup management into one dashboard. While straightforward to use, it does not provide the same level of customisation or feature depth offered by longer-established NAS operating systems such as Synology DSM or QNAP QTS.

Storage management is limited by the two-bay architecture. Users can create RAID 0 or RAID 1 volumes, or operate drives independently. Drive health monitoring, temperature reporting, and snapshot scheduling are all included, allowing basic resilience and file recovery options.

Snapshots can be created and managed at the folder level, with the ability to lock snapshots to prevent deletion. Encryption, however, does not appear to be available on the UNAS 2, in contrast to larger UniFi NAS models where encrypted volumes are supported.

Backup functionality includes both system configuration and file-level options. Configuration backups can be stored locally or uploaded to a ui.com account, allowing the system to be restored quickly if reset or replaced. File-level backups extend to other UniFi NAS systems and selected cloud services, including Google Drive, with scheduling available for automation.

Local LAN backups to other storage devices via SMB are also supported, though filtering and exclusion rules are limited. The system is therefore capable of basic backup routines but lacks the more granular tools available on competing platforms.

User and access management is integrated into the UniFi ecosystem. Administrators can create local accounts or bind accounts to UniFi’s identity services, with two-factor authentication supported via the UniFi Verify app.

Permissions can be set at the folder level, and users can be restricted to LAN-only access if required. Supported protocols include SMB and NFS, but there is no iSCSI target functionality, limiting its application in virtualisation or editing workflows.

The software also includes fan control and system monitoring tools, but resource reporting is basic, with only CPU and memory utilisation graphs available.

Overall, the software reflects UniFi’s effort to balance simplicity with integration, but it remains less comprehensive than that of established NAS vendors.

UniFi UNAS 2 Review – Verdict and Conclusion

The UniFi UNAS 2 is presented as a compact and affordable two-bay NAS designed for straightforward storage and backup tasks, particularly within environments already using UniFi networking hardware. Its PoE++ design is distinctive, allowing both power and connectivity to be delivered over a single cable, simplifying installation where compatible PoE switches are available. This approach aligns with UniFi’s strategy of reducing external hardware requirements, though it also means that a failed port or damaged cable will disable both power and network access simultaneously. For non-UniFi users, the reliance on PoE++ creates an additional barrier, as adoption requires either compatible infrastructure or the included 60W injector. The shared dual-drive tray, lack of hot-swap support, and absence of expansion options further reinforce the system’s role as a fixed-capacity solution, best suited to smaller or secondary deployments. With a maximum drive budget of 52W and overall consumption limited to 60W, the device is power-efficient, but its architecture prioritises simplicity over flexibility.

On the software side, the UNAS 2 provides a user-friendly interface with access to snapshots, RAID configuration, system backups, and integration into the UniFi identity ecosystem. However, the limited hardware constrains the range of features available, and certain tools seen in UniFi’s larger NAS models are absent, such as encrypted volumes or extended network protocol support. Performance testing showed sequential read speeds up to 260 MB/s and write speeds around 160–180 MB/s, which make full use of the 2.5 GbE interface but leave little headroom for more demanding tasks. Thermals during extended use regularly pushed the CPU into the high 70s Celsius, and although fan management can be adjusted, sustained workloads highlight the limits of the system’s cooling design. The software’s omission of iSCSI and advanced backup filters also narrows its role, making it less competitive against established vendors in professional or virtualisation scenarios.

Ultimately, the UNAS 2 is most appropriately positioned as an edge or secondary NAS, providing basic networked storage for existing UniFi users who value plug-and-play deployment and ecosystem consistency, but it is not equipped to serve as a primary system in larger or more demanding environments (VMs, Containers, etc). A great and unique NAS that will nbe at it’s most appealing if you are already invested in the UniFi ecosystem, or have a NAS already that needs a network backup.

You can buy the UniFi UNAS 2 NAS via the link below – doing so will result in a small commission coming to me and Eddie at NASCompares, and allows us to keep doing what we do! 

Join Inner Circle

Want to follow specific category? Also Read...UniFi Launch the New UNAS 2, UUniFi UNAS Pro 8 ReviewUniFi Launch the New UNAS 2, UUniFi UNAS Pro 8 ReviewUniFi UNAS 2 ReviewNEW UniFi NAS - What Comes NexNEW UniFi NAS - What Comes NexWhere to Buy UniFIUnifi NAS on YouTubeUniFi NAS Subscribe You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

WE LOVE COFFEE