Vue normale

Il y a de nouveaux articles disponibles, cliquez pour rafraîchir la page.
À partir d’avant-hierFlux principal

Jonsbo N2 vs Fractal Design Node 304 NAS Case – Which DiY NAS Case Should You Buy?

Par : Rob Andrews
4 décembre 2023 à 18:00

Jonsbo N2 vs Fractal Node 304 NAS Case Comparison

If you’ve been in the market to buy yourself a desktop NAS enclosure on your road towards building the perfect private cloud that is completely under your control, then there is a pretty good chance that you have looked at the Jonsbo N2 case and the Fractal Node 304 NAS enclosure. These are 2 DIY NAS cases that have been released around a decade apart, yet they are both among the most popular and most recommended desktop cases in the market. It’s surprising how 10 years can pass, yet these two server cases still hold prominence. This prominence leaves you with the ultimate question: which one is best suited to your rather compact private server needs? That is what we’re covering in today’s article. We are going to compare these cases, their strengths and weaknesses, and hopefully, by the end of it, you’ll know which one is going to proudly house your future data storage cloud.

Jonsbo N2

Fractal Node 304

Amazon Check $149 (Check Amazon HERE) $89 (Check Amazon HERE)
AliExpress Check $76 (Check Aliexpress HERE) $109 (Check Aliexpress HERE)
Storage Potential – Supports 5 traditional HDDs and 1 SATA SSD. – Can accommodate 6 drives with more flexibility.
– Modern ejectable storage bays. – Older design, non-ejectable drive caddies.
CPU & Mobo Support – Limited CPU cooler height up to 65mm. – Ample space for CPU coolers up to 160mm.
– More compact design for motherboard support. – Horizontal motherboard placement at base.
PCIe Upgrades – Supports only specific dimensions for PCIe cards. – Highly flexible, supporting most PCIe cards.
– Limited to half-height, 3/4 length cards. – Space and design born from the GPU boom era.
Ventilation – Single fan behind storage bays. – Enhanced ventilation with multiple fan setups.

Jonsbo N2 vs Fractal Node 304 NAS Case – Specifications Compared

Before we go any further, it’s worth quickly comparing the specifications of these two cases. As mentioned earlier, private NAS server components have been in development from hundreds of brands across thousands of products for many years now, and it can be easy to accidentally choose an incompatible piece of hardware. Therefore, I recommend you take the time to quickly check the specifications below, just to double-check that the Jonsbo N2 and Fractal Node 304 are definitely going to be compatible with your CPU, motherboard, or PSU of choice.

Specification/Feature Jonsbo N2

Fractal Node 304

Dimensions 222.5mm(W) x 222.5mm(D) x 224mm(H) 250mm (W) x 210mm (H) x 374mm (D)
Material External: 2.0mm Aluminum alloy; Internal: 1mm Steel Not specified
HDD/SSD Positions 1 x 2.5″ SSD, 5 x 3.5″ HDD 6 (3.5″ / 2.5″)
Motherboard Compatibility ITX Mini ITX, Mini DTX
PCI Expansion Slots 1 x Low profile single slot 2
Front Ports 1 x USB 3.0 / USB 3.2 Gen2 Type-C, Audio+Mic (Combined) 2x USB 3.0, 1x 3.5 mm audio in, 1x 3.5mm audio out, Power button with LED, HDD LED
PSU Compatibility SFX (≤150mm) ATX (up to 160 mm in length)
Max. CPU Cooler Height ≤65mm 165mm
GPU Max Length ≤197mm (Low profile) 310mm (restrictions apply)
Cooling System 1 x 12015mm fan (built-in) Front: 2x 92mm, Rear: 1x 140mm
Weight 2.9kg 4.9kg
Warranty Not specified 2 Years

Even a casual glance at the specifications side by side will give you a decent understanding of the slightly different target audience that these two systems have in mind. The Jonsbo N2 appears to be a more compact solution, while the Fractal Node 304 definitely seems bulkier of the two. With that said, let’s move on to our first section: design.

Jonsbo N2 vs Fractal Node 304 NAS Case – Design

One of the clearest and most obvious distinctions between the N2 and the Node 304 is the sheer physical size difference. Even though both of these systems offer a somewhat similar level of hardware support and internal cavities for different utilities, there’s a significant distinction between them in terms of physical space.

A large part of this difference stems from how each system is oriented in terms of its intended use. The Fractal Node 304 is much more focused on storage than on other cloud server applications. This orientation allows the system to be considerably more compact, emphasizing ventilation, with the storage cavity occupying roughly 30 to 40% of the entire enclosure’s physical space.

The Fractal Node 304, on the other hand, strikes a balance between storage, utilities, and support for numerous PCI upgrades in the future. Although both systems support only M-ITX motherboards, the Node 304 provides significantly more space for all internal components.

Both chassis predominantly feature a metal-based material design, with a smattering of plastic around the edges and front panel. They are available in both black and white color options, and neither have immediately visible LED indicators. The front panel of the Fractal Node 304 exhibits a brushed steel effect, with ventilation primarily around the edges rather than the front. The N2, however, boasts more ventilation around its front panel’s lower half, an aspect we’ll delve into shortly.

A notable distinction lies in their USB connectivity. The Fractal Node 304 offers two USB 3.2 Gen 1 5Gb/s Type A connections, whereas the newer N2 provides a mix of USB Type A and Type C, alongside 10 gigabit USB 3.2 Gen 2 connections. It’s essential to ensure that your ITX motherboard has the appropriate front panel connectors (or you have an adapter card). This difference is one of the subtle quality-of-life enhancements resulting from the N2’s more recent release.

A decade ago, the Fractal Node case was a standout. Most DIY NAS cases back then were either slightly tweaked standard PC towers or bulky, outdated modded shuttle cases. These didn’t quite match the style of turnkey NAS solutions from brands like Synology or QNAP. Fast forward to 2023, and there’s a plethora of stylish and contemporary NAS enclosures for DIY enthusiasts. This change in landscape explains the surge in popularity for cases like the Jonsbo N2, known for their robust construction and tailored design for private server use. Aesthetically, I have a preference for the Jonsbo N2 due to its compact nature. But how does this more discreet and compact design fare? Up next, we’ll explore the ventilation and cooling aspects of these two NAS enclosures.

Jonsbo N2 vs Fractal Node 304 NAS Case – Ventilation and Cooling

To say that these two devices have approached the subject of ventilation in entirely different manners would be a significant understatement! This discrepancy is particularly striking given the vast differences in size between the two units. Even with a cursory look, it’s evident that the older Fractal Node 304 has superior ventilation.

The newer Jonsbo N2, with its more compact design, arguably offers a streamlined ventilation approach due to the significant space occupied by the 3.5″ bays. In the N2, most ventilation can be channeled along a singular path. As long as there are ample spaces between components, the fans can efficiently direct airflow through these cavities, exiting through passive ventilation outlets. Specifically, the N2 offers ventilation on both sides, across the top (directly above the motherboard and CPU fan), and at the rear where a large 120mm fan is positioned behind the storage drives.

In contrast, the Fractal Node 304 adopts a more expansive approach. While its front remains flat without any storage, ventilation surrounds its edges, complemented by a mesh vent at the top. Inside, two 92mm fans draw air in, channeling it towards an even more massive 140mm fan at the rear. These silent-design fans, despite numbering three, collaboratively minimize operational noise, a fact attested by multiple reviews over the years. Moreover, given the Node 304’s capacity to accommodate a wider range of internal components, additional passive ventilation and mesh panels are present on both sides, plus a removable mesh vent panel beneath the motherboard. With support for larger PCIe cards and power supplies, the Node 304’s side ventilation panels are also more expansive and include dust-capturing vents.

It’s reasonably expected for the larger case to have more ventilation and space for extra fans. Yet, considering both these systems support MITx motherboards and have a slight difference in SATA drive count, the stark difference in ventilation, especially given a similar price point, is surprising. In some places, the more extensive and better-ventilated Node 304 even offers more value for money. Furthermore, given the N2’s tightly packed hardware, one may wonder if its single fan and current ventilation strategy would suffice for more demanding builds. While the Jonsbo is undoubtedly a feast for the eyes and likely benefits from subsequent years of NAS case R&D, the Fractal Node remains the frontrunner in terms of superior ventilation and active cooling capabilities.

Jonsbo N2 vs Fractal Node 304 NAS Case – Storage Potential

Assessing the storage potential of both the N2 and Node 304 requires considering multiple aspects, such as the inherent storage capabilities and the potential for expansion. Both systems offer roughly similar SATA storage capacities, with each claiming support for six drives. In the N2’s case, this translates to five traditional hard drives and one SATA SSD drive. When incorporating the potential of upgradable PCIe cards (a topic we will delve into in more detail later), the Node 304 clearly allows users to attach a greater number of m.2 SSD drives via compatible expansion cards.

That said, it’s crucial to acknowledge that the decade-old Fractal Node 304 employs a somewhat outdated and intricate method for its SATA storage bays. Modern NAS cases generally favor hot-swappable storage bays and trays. These enhance the user experience by permitting the addition of new drives during an existing drive failure without powering down the system. This convenience leads to shorter RAID rebuilds and resync durations and demands less maintenance. This feature is especially valuable for premium business servers that cannot afford extended downtimes or for larger RAID configurations. The latter group avoids powering down and restarting existing storage pools, lest another faulty drive activates. Despite the Node 304’s enduring appeal since its launch, its design—featuring protruding drive caddies and requiring individual cable connections to motherboards or PCIe cards—feels dated. Consequently, the now-standard ejectable storage bays on the N2 appear far more attractive.

The N2 boasts somewhat unconventional yet user-friendly rubber-handled storage drive bays. Additionally, its internal backplane has all five combined SATA and power connectors directly soldered and aligned with the corresponding drive slots. Users will still need to connect each of these SATA drives to the motherboard via angled SATA cables through a dedicated space in the side of the enclosure. However, this configuration results in a much smoother drive installation process, which has been the preferred approach in most NAS server designs over the years.

Over the decade since the Fractal Node 304’s introduction, enthusiasts have created numerous modifications and 3D printed plans for improved storage brackets for this case. Some have even designed third-party SATA backplanes tailored for those protruding drive caddies, simplifying the task of connecting multiple drives. Nevertheless, in its original form, the Node 304’s drive bays come across as remarkably archaic, especially when juxtaposed with the direct-injection storage ease offered by the N2.

Jonsbo N2 vs Fractal Node 304 NAS Case – CPU and Mobo Support

Both the Jonsbo N2 and Fractal Node 304 NAS enclosures cater to DIY builders and are compatible with MRTX and DTX motherboards. The larger Node 804 accommodates m-ITX, attracting numerous users. However, MITx technology has witnessed significant advancements over recent years. Today, you can easily find ITX motherboards that support the most current Intel Core and IMD processors. This progress effectively negates any past limitations these compact motherboards may have posed. Within the context of the N2 and Node 304, the motherboard placement varies considerably.

The Fractal Node 304 positions the motherboard horizontally at the base of the case, complemented by the aforementioned ventilation panel underneath. Conversely, the N2 places the motherboard closer to the case’s top, yet it still maintains horizontal alignment. While both designs allow for the attachment of a PCIe card without necessitating a riser or sister board, the varied placements result in considerable differences in CPU cooler support. CPU fans, heat sinks, or coolers—regardless of terminology—are indispensable for 24/7 server operation. The more robust your CPU, the more substantial and sophisticated your cooling solution must be. If your system involves a moderate setup, like a top-tier Celeron or Pentium, the issue is less pressing. Many motherboards in this category come with an attached micro CPU fan or are compatible with horizontally-positioned CPU fans that are around an inch in height. However, advanced processors require more intricate coolers with integrated fans, copper piping, and a design that sits slightly above the motherboard to ensure optimal airflow.

Unfortunately, the Jonsbo N2 has a height restriction for CPU coolers at 65mm. Though coolers fitting this specification for contemporary processors do exist, they often carry a premium price due to their incorporation of more copper piping and multiple smaller fans. Moreover, a cooler’s efficacy increases when aligned with the case’s passive/active ventilation—a feature the N2 somewhat lacks. The N2’s singular fan is situated behind the storage bays, and there isn’t a dedicated fan space for the motherboard and CPU. In contrast, the Jonsbo N3 case can accommodate two 80mm fans, while the N2 lacks the space or the necessary mounting brackets.

On the other hand, the Node 304 not only includes two 92mm fans and a larger 140mm rear-mounted fan but also accommodates CPU coolers with a height of up to 160mm. Owing to the motherboard’s base-level positioning within the chassis, even after installing larger PCIe cards and hard drives, there remains ample space for the market’s most substantial CPU coolers—ideal for high-performance server configurations.

In summary, regarding motherboard and CPU installation, the Fractal Node 304 offers notably more space and cooling versatility than the N2, notwithstanding the decade gap in their respective release dates. Up next, we’ll explore PCIe installation, highlighting another key distinction between the two models.

Jonsbo N2 vs Fractal Node 304 NAS Case – PCIe Upgrades

Long-term scalability and upgrades of your NAS server aren’t considerations exclusive to businesses. Even the most casual enthusiast should factor in potential future changes. Whether you’re contemplating upgrading your local area network, enhancing your private server with lightning-fast m.2 SSD storage, or even venturing into adding a graphics card down the line, PCIe upgrade slots on your chosen NAS server will undoubtedly be a critical aspect, whether on day one or day 1,000. Choosing the appropriate NAS case, ensuring it allows you to effectively scale via PCIe expansions, is a foundational decision. It’s a choice that, years down the line, you’ll either commend or regret. The N2 seems to offer fewer considerations for PCIe upgrades, which is surprising given the decade difference in release dates compared to the Fractal Node 304.

The Fractal Node 304 can accommodate virtually any PCIe card, regardless of its height, length, or depth. Designed during the peak of GPU cryptocurrency mining, the Node 304 mitigates the single PCIe slot limitation inherent in M-ITX motherboards by providing ample space for almost any card—eliminating the need for a riser or expander card. This flexibility is not just due to its generous physical dimensions but also its thoughtful design: the side housing the PCIe slots boasts a large, ventilated, mesh-protected panel, which significantly boosts active airflow.

In contrast, the Jonsbo N2, while able to house a single PCIe card, imposes far more restrictions on card dimensions. Practically speaking, the N2 confines users to half-height, 3/4 length, and single-depth cards (owing to the lower cavity at the case’s top). Consequently, a majority of graphics cards are incompatible. Additionally, while single and dual-port cards will fit, quad-port cards—typically full-height—are incompatible. Another potential hurdle is the single card depth, which, though seldom an issue for network expansion cards, might become problematic for aggressive m.2 storage expander cards that come equipped with sizable heat dissipation panels.

For many, these limitations might not deter them from selecting the Jonsbo N2, which remains an excellent choice for a DIY NAS enclosure. However, it’s undeniable that the seasoned Fractal Node 304 provides more space and versatility for expansions.

Conclusion: Jonsbo N2 vs Fractal Node 304 NAS Case

After a detailed analysis of the Jonsbo N2 and the Fractal Node 304 NAS cases, it becomes clear that each offers unique advantages tailored to specific user needs. For the modern enthusiast or DIY builder who values sleek design and appreciates newer features like direct-injected storage bays, the Jonsbo N2 is a fantastic choice. Its design, though limiting in some aspects like PCIe upgrades, still offers sufficient versatility for those who don’t require expansive graphics or connectivity solutions. It’s well-suited for users who desire a NAS for standard use without aggressive expansion plans.

On the other hand, the Fractal Node 304, with its decade-old legacy, stands out for users prioritizing versatility and upgradability. Despite its older design, it offers more room for CPU coolers, greater flexibility in PCIe card selection, and superior ventilation—making it ideal for power users and those looking to build more aggressive server setups. Moreover, businesses and hobbyists inclined towards regular expansions will find the Node 304’s forward-thinking design a significant boon. Ultimately, choosing between the two boils down to individual requirements. The N2 serves as a modern, efficient solution for standard builds, while the Node 304 caters to those seeking maximum flexibility and growth potential.

Jonsbo N2

Fractal Node 304

Amazon Check $149 (Check Amazon HERE) $89 (Check Amazon HERE)
AliExpress Check $76 (Check Aliexpress HERE) $109 (Check Aliexpress HERE)
Storage Potential – Supports 5 traditional HDDs and 1 SATA SSD. – Can accommodate 6 drives with more flexibility.
– Modern ejectable storage bays. – Older design, non-ejectable drive caddies.
CPU & Mobo Support – Limited CPU cooler height up to 65mm. – Ample space for CPU coolers up to 160mm.
– More compact design for motherboard support. – Horizontal motherboard placement at base.
PCIe Upgrades – Supports only specific dimensions for PCIe cards. – Highly flexible, supporting most PCIe cards.
– Limited to half-height, 3/4 length cards. – Space and design born from the GPU boom era.
Ventilation – Single fan behind storage bays. – Enhanced ventilation with multiple fan setups.

This table succinctly encapsulates the strengths and weaknesses of both NAS cases, aiding potential buyers in making an informed decision based on their specific needs.

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔
[contact-form-7]
🔒 Join Inner Circle

Get an alert every time something gets added to this specific article!


Want to follow specific category? 📧 Subscribe

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions
If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
 
Or support us by using our affiliate links on Amazon UK and Amazon US
    
 
Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

 

The Best CPU+Motherboard Combo for Your NAS Build – 2024 Edition

Par : Rob Andrews
9 février 2024 à 15:00

The Best CPU and Motherboard Bundle to Build a DiY NAS (UPDATED)

I think it would be an understatement to say that building your own NAS system from scratch has gotten easier every year for about the last decade! From custom cases that have rolled out from numerous brands that allow you to genuinely build a compact personal cloud, to more efficient processes and compact ITX motherboards arriving as bundles that really simplify the entire build process, it really has never been easier to build your own NAS than right now! However, there is also still no avoiding that it’s hardly a turnkey process and as easy as the physical work is to build the device these days, the complexity that goes into choosing the right components and making sure they work together is as frustrating and tech deep speak covered as always! So today I want to recommend several CPU plus motherboard to your perfect type performance NAS server. Each one focuses on a different priority of user for their own personal NAS server, from performance to Plex, or from business to pleasure! Here are Four NAS motherboard and CPU combos that I recommend for your BYO NAS project!

In a rush? Let’s Cut to the chase!

If you’re in a rush and simply want to know about the best CPU and motherboard combo to build your best DIY NAS system, below, you can find direct links to each of these bundles that can be purchased predominantly on AliExpress, but some of these options are also available on retailers such as Amazon and Newegg. If you were going to shop at these retailers anyway, why not use the links below as it will ensure that we act as comparers could earn a small fee from these shops. It allows us to keep doing what we do.

 

Here are ALL the Motherboard+CPU Combos that we cover in this article:

  • (The Best) i3-N305 M-ITX BoardCheck AliExpress ($289-349 with Memory) HERE and Amazon HERE
  • (x4 m.2 @ Gen 4×4) The Minisforum AR900i CPU + M-ITX Motherboard Combo ($399) Amazon HERE
  • (Best for PLEX) Erying 13th Gen i9 Combo 14C / 20T $459  HERE
  • (Gen 5 M-ITX) MINISFORUM BD770i ITX Motherboard $489 (AliExpress) HERE and $399 (Amazon) HERE
  • (Plex Alternative #1) Erying 12th Gen I9 Combo 14C / 20T $389 HERE
  • (ECC M-ITX Combo) CWWK 8-Bay / 9-Bay Board AMD-7735HS/7840HS/8845HS/7940HS $489 (AliExpress) HERE
  • (Plex Alternative #2) Erying 11th Gen i7 8C / 16T = $262  HERE
  • (Best Storage) X99 Motherboard + 32GB RAM = $158 HERE or E5-2680 V.4 CPU + 32GB RAM = $176  HERE
  • (Best Value) Intel N6005 + Motherboard = $229 HERE
  • (Best Value EXTRA) Intel N6005 + Motherboard + 8GB RAM + 128GB SSD = $275 HERE
  • AMAZON – Intel N6005 + Motherboard = $169 HERE

Best Gen 5 CPU+Motherboard Combo – MINISFORUM BD770i ITX Motherboard

Spec Highlights – BD770i-AMD Ryzen 7 7745HX, 8 Cores/16 Threads (5.1 GHz) OR BD790i-AMD Ryzen 9 7945HX, 16 Cores/32 Threads (up to 5.4 GHz), SODIMM DDR5 Slots×2 Max 64GB, 2×M.2 2280 PCIe5.0 SSD Slots, PCIe 5.0 X16 connector, 1x 2.5GbE and Lack of SATA! $489 on AliExpress and $399 on Amazon

The Minisforum BD770i and BD790i motherboard and CPU combo represents a cutting-edge solution for enthusiasts and professionals seeking powerful performance in a small footprint. With the BD770i featuring the AMD Ryzen™ 7 7745HX and the BD790i equipped with the AMD Ryzen™ 9 7945HX, these systems offer unparalleled processing power that caters to a wide range of demanding tasks, from advanced computational workloads to intensive multitasking scenarios. The AMD Radeon™ 610M GPU, integrated into both models, while not designed for high-end gaming, capably supports everyday graphics needs, including casual gaming, video streaming, and content creation, making this combo a versatile choice for various computing needs.

The inclusion of PCIe 5.0 support stands out as a significant advantage, offering double the bandwidth of its predecessor, PCIe 4.0. This enhancement ensures that users can take advantage of the fastest available SSDs and expansion cards, dramatically reducing load times and facilitating quicker data access. This forward-thinking feature ensures that the system is prepared to handle future technological advancements, making it a wise investment for tech enthusiasts looking to stay ahead of the curve. However, it’s important to note the absence of traditional SATA ports, which means users with SATA drives will need to consider alternatives such as SATA M.2 adapters or adding a PCIe card to accommodate these devices. This requirement might necessitate additional planning and investment for those who wish to integrate existing storage solutions into their new setup.

Specification BD770i BD790i
Processor AMD Ryzen™ 7 7745HX, 8 Cores/16 Threads<br>(32M Cache, up to 5.1 GHz) AMD Ryzen™ 9 7945HX, 16 Cores/32 Threads<br>(64M Cache, up to 5.4 GHz)
GPU AMD Radeon™ 610M AMD Radeon™ 610M
Memory DDR5 Dual channel<br>(SODIMM Slots×2, up to 5200 MT/s, Max 64GB) DDR5 Dual channel<br>(SODIMM Slots×2, up to 5200 MT/s, Max 64GB)
Storage 2×M.2 2280 PCIe5.0 SSD Slots 2×M.2 2280 PCIe5.0 SSD Slots
Expansion Slot PCIe 5.0 X16 connector ×1 PCIe 5.0 X16 connector ×1
Wireless Connectivity M.2 2230 Key E Slot M.2 2230 Key E Slot
Video Output HDMI2.0 ×1<br>DisplayPort1.4 ×1<br>USB-C ×1 HDMI2.0 ×1<br>DisplayPort1.4 ×1<br>USB-C ×1
Audio Output HDMI2.0 ×1<br>DisplayPort1.4 ×1<br>USB-C ×1<br>Line Out ×1 HDMI2.0 ×1<br>DisplayPort1.4 ×1<br>USB-C ×1<br>Line Out ×1
Ethernet RJ45 2.5G Ethernet Port×1 RJ45 2.5G Ethernet Port×1
USB Ports USB3.2 Gen2 Type-C Port ×1 (Alt DP)<br>USB3.2 Gen1 Type-A Port ×2<br>USB2.0 Type-A Port ×2 USB3.2 Gen2 Type-C Port ×1 (Alt DP)<br>USB3.2 Gen1 Type-A Port ×2<br>USB2.0 Type-A Port ×2
I/O Ports 4-pin CPU Fan header ×1<br>4-pin System Fan header ×2<br>4-pin SSD Fan header ×1<br>USB 3.2 Gen 1 header ×1<br>Front Panel Audio header ×1<br>System Panel header ×1 4-pin CPU Fan header ×1<br>4-pin System Fan header ×2<br>4-pin SSD Fan header ×1<br>USB 3.2 Gen 1 header ×1<br>Front Panel Audio header ×1<br>System Panel header ×1
Form Factor Mini-ITX Form Factor (170x170x1.6mm) Mini-ITX Form Factor (170x170x1.6mm)

A notable constraint in this powerful combo is the provision of a single RJ45 2.5G Ethernet port. While this port offers a solid network connection suitable for most applications, users with specialized networking needs or those looking to expand their network connectivity may find this limitation challenging. The necessity to potentially use the high-speed PCIe 5.0 slot for a network interface card upgrade, just to augment networking capabilities, could be seen as an inefficient use of this high-bandwidth resource. This situation highlights a trade-off between the advanced PCIe support and the flexibility in networking expansion, prompting users to carefully consider their priorities when planning their system configuration.

Despite these considerations, the overall package offered by the Minisforum BD770i and BD790i is compelling. The combination of cutting-edge CPU performance, robust PCIe 5.0 support, and a variety of connectivity options, including USB 3.2 ports and multiple video outputs, provides a solid foundation for a high-performance, compact computing solution. #

Furthermore, the support for up to 64GB of DDR5 memory and the inclusion of two M.2 2280 PCIe 5.0 SSD slots offer ample room for memory and storage expansion, enhancing the system’s capability to handle future needs. This blend of high-end features, coupled with the Mini-ITX form factor’s space efficiency, makes the BD770i and BD790i an attractive option for users seeking a powerful, yet manageable, computing platform.

 

Where to Buy the MINISFORUM BD770i ITX Motherboard Combo:
  • Check AliExpress ($489 with Memory) HERE
  • Check Amazon ($399) HERE

 


Best CPU+ Motherboard for a Premium Feature but Low Power Consumption NAS – The i3-N305 M-ITX Board

Spec Highlights – i3-N305, 4x Intel i226-V 2.5G Nics, 2x M.2 NVMe. 6x SATA, 1*DDR5 SODIMM, HDMI2.0 + DP – $289 on AliExpress

Currently, the “build your own” favorite across many forums, the new Intel N305 processor, an 8-core, eight-thread i3 processor, comes pre-installed on a Mini-ITX board. It not only provides a remarkably low 7-watt TDP when needed but also offers significant scalability in terms of both clock speed and power efficiency. The $289 N305 version of the CPU and Motherboard combo presents a practical and economical choice for commercial use (making it the perfect upgrade/alternative to the Topton N6005 / N5105 that was so popular last year for first time NAS DiY’ers). It is equipped with the Intel® Core™ i3-N305 Processor, which is a part of the Alder Lake-N series. This processor boasts eight cores and eight threads, with a max turbo frequency of 3.80 GHz, offering ample computing power for everyday tasks and certain commercial applications. The processor is fabricated using Intel 7 lithography technology, which is indicative of its advanced and efficient design.

Memory support on this combination is versatile, with the motherboard supporting a SO-DIMM DDR5 memory slot, compatible with frequencies of 4800/5200/5600MHz. Although the processor supports a maximum memory size of 16 GB, which is a consideration to keep in mind, the motherboard can handle up to 32 GB, potentially allowing for future upgrades if the board’s capacity is indeed supported by later CPU models or firmware updates.

The integrated graphics, Intel® UHD Graphics with 32 Execution Units, can dynamically operate at up to 1.25 GHz and support 4K content at 60Hz, making it suitable for high-definition displays and basic graphical tasks. Here’s the specification of the $289 N305 version of the CPU+Motherboard combo:

Specification Detail
Model Number NAS-N100-N305
Processor Brand Intel
Processor Models Intel® Alder Lake-N i3-N305 (up to 3.8 GHz)
Type MINI PC / PC Stick
Origin Mainland China
Brand Name YSJMNPC
Use Commercial
Memory – Support notebook DDR5 technology
– 1 SO-DIMM DDR5 slot
– Compatible with 4800/5200/5600MHz
– Max capacity: 32GB
Storage – 6 x SATA3.0 6Gb/s interface
– 2 x M.2 NVMe 2280
Graphics Card Integrated Card (depending on processor model)
Network Card 4 x Intel i226-V 2.5G RJ45 network port
I/O Panel – 2 x USB 2.0
– 1 x USB 3.0
– 1 x Type-C (2.0 rate)
– 1 x HDMI
– 1 x DP
– 4 x RJ45 2.5G network port
– 1 x AUDIO 3.5mm interface
Motherboard Features – Matte black PCB
– Moisture-free fiber 8-layer circuit
– Full protection (USB, audio, network)
TDP 9-15W
Structure MINI-ITX (17.0cm x 17.0cm)
Capacitor Design All solid capacitor
Expansion Slots 1 PCIe x1 (shared with 2nd M.2)
Onboard Interface – F_PANEL pin
– TPM pin (compatible with ASUS TPM module)
– USB2.0 pin
– CPU_FAN 4-pin (temperature control)
– SYS_FAN 4-pin (temperature control)
– 24+4 ATX power interface
Cooling – Compatible with 115X radiators
– Silent temperature-controlled radiator
– Support for two high-performance radiators

In terms of connectivity, the combo is well-equipped with a variety of interfaces, including multiple USB ports with different standards, HDMI 2.1, and DisplayPort 1.4 for video output, and an Intel i226-V 2.5G RJ45 network port for fast wired internet connections.

The inclusion of PCIe lanes and M.2 slots provides additional expansion capabilities, allowing for further customization and the addition of peripherals or storage solutions. The motherboard’s MINI-ITX form factor makes it a compact solution that can fit into small cases, suitable for workspaces with limited room. EASILY the easiest choice of all the NAS Mobo+CPU options on this list, as one of the newest, lowest in price – yet impressively powerful, despite its lower TDP.

Where to Buy the i3-N305 CPU + M-ITX Motherboard Combo:
  • Check AliExpress ($289-349 with Memory) HERE
  • Check Amazon HERE

ECC CPU+Motherboard M-ITX Combo – The CWWK 8-Bay / 9-Bay Board AMD-7735HS/7840HS/8845HS/7940HS

Spec Highlights4x AMD MobileRyzen Options, SODIMM DDR5 Slots×2, ECC Supported, 2×M.2 2280 4×2 SSD Slots, PCIe 4×8 connector ×1 (x16 Physical), SFF-8643 x2 Connectors for SATA III, 4x 2.5GbE, USB 4 (20Gbs Limits) , Internal USB 2.0  $489 on AliExpress and Check on Amazon

The combination of the AMD “Zen 4” architecture Ryzen™ 5/7/9 series processors with the Minisforum motherboard offers a high-performance platform that is particularly suitable for building a Network Attached Storage (NAS) server. The Mini-ITX form factor of the motherboard, compatible with 1700 series CPU coolers, ensures that it can fit into compact NAS cases while providing adequate cooling for the powerful processors housed within. In the realm of NAS servers, storage options and connectivity are key. The motherboard’s two M.2 NVMe (PCIe 4.0 x2) slots are ideal for high-speed storage drives that can handle intense read and write operations typical in a NAS environment. The inclusion of 2 * SFF-8643 sockets, which support up to four connections each and a total of 9 SATA 3.0, is an advanced feature that provides flexibility and scalability for storage expansion. This is particularly beneficial for NAS setups where large storage pools and redundancy (such as RAID configurations) are important.

Network connectivity is another critical aspect of NAS servers, and this motherboard delivers with its 4 * Intel i226-V 2.5G RJ45 UDE network ports, allowing for high-speed data transfer and network redundancy or link aggregation if required. However, the lack of 10GbE port might limit the network throughput if higher speeds are needed, in which case the PCIe Gen 5×16 slot could be employed for an additional network interface card, although this might be considered an inefficient use of this high-bandwidth expansion slot. Lastly, the wide array of USB ports, including USB3.2 Gen2 Type-C with a 20Gbps rate and additional USB3.2 and USB2.0 ports, adds to the versatility of this motherboard. The built-in set of USB3.2 pin sockets also allow for further expansion and connectivity options, essential for a NAS that may need to accommodate a variety of peripherals or provide additional data transfer interfaces.

Feature Category Specifications
Processor Support Equipped with AMD “Zen 4” architecture Ryzen™ 5/7/9 series high-performance processors
Form Factor 17×17 standard Mini-ITX form factor compatible with 1700 series CPU coolers
Expansion Slots 1 PCI-E x16 slot PCIe 4.0 x8 signal supports expansion of graphics card/network card, etc.
Storage 2 * M.2 NVMe (PCIe 4.0 x2) slots 2280 size
SATA Support 2 * SFF-8643 sockets support one to four via cable and support 9 SATA 3.0
Memory Dual-channel SO-DIMM DDR5 slot supports 5600MHz backward compatibility by default<br>Dual-channel SO-DIMM DDR5 slot supports server-grade ECC notebook strip
Networking 4 * Intel i226-V 2.5G RJ45 UDE network ports support AllinOne and other applications
Video Output HDMI+DP+Type-C triple display output supports 4K@60Hz
USB Ports 3 * USB3.2+1 Type-C (USB4) interface 20Gbps rate<br>Built-in set of USB3.2 pin sockets can be connected to the panel through connecting cables<br>Built-in two USB2.0 sockets support U disk encryption and other applications and partial system boot

Given these specifications, the Minisforum motherboard with an AMD Ryzen processor is well-equipped for a NAS server build, offering a balance of processing power, high-speed storage capabilities, and robust connectivity options.

Where to Buy the CWWK 8-Bay / 9-Bay Board AMD-7735HS/7840HS/8845HS/7940HS Motherboard Combo:
  • Check AliExpress ($489 with Memory) HERE
  • Check Amazon HERE

Best CPU+ Motherboard+ Memory Combo for a Business File Server – The X99 Motherboard Kit (ITX)

Spec Highlights – Business X99 Motherboard Combo ITX LGA2011, C612 for NAS Router+File Server, 6×2.5GbE I226, 10xSATA, 1x M.2 (OS), 14Core / 28 Thread Intel Xeon E5-V3 V4- $176 on AliExpress

This combination is ideal for business users needing power and scalability. The X99 motherboard with an older Xeon CPU balances performance, connectivity, and storage expansion. It supports 10 SATA drives and a M.2 NVMe slot, alongside 15 gigabits of network bandwidth across six 2.5G Ethernet ports. The NAS CPU+Memory combo anchored by the Intel Xeon E5-2680 v4 is a robust solution for a NAS file server. The CPU’s 14 cores and 28 threads are engineered for multitasking and can efficiently manage the demands of multiple simultaneous data transactions, which is a common requirement in NAS setups. The motherboard’s ten SATA ports and an M.2 NVMe slot offer versatile and ample storage options, facilitating both high-capacity and high-speed data storage solutions. This combination of CPU power and storage flexibility makes it an excellent choice for a NAS system.

owever, the Intel Xeon E5-2680 v4 processor’s launch date in Q1’16 might give pause to some users considering the latest advancements in processor technology. While newer CPUs may offer improved power efficiency and the benefit of ongoing support from Intel, the E5-2680 v4 still holds its ground as a reliable workhorse. Its architecture, although not the newest, delivers steadfast performance which, alongside its competitive pricing, presents an exceptional value proposition for budget-conscious setups or where cutting-edge efficiency is not the primary concern.

Specification Details
Processor Intel Xeon E5-2680 v4, 14 cores, up to 3.30 GHz Turbo
Chipset Intel C612
Memory Support 2x DDR4 DIMM slots, up to 64 GB, supports ECC
Storage Options 1x M.2 NVMe, 10x SATA Ports
Expansion 1x PCIe 3.0 x16
Network 6x Intel i226 2.5 Gigabit Ethernet
Power Supply ATX 24 Pin + 8 Pin
Video Output VGA
RAID Support RAID 0/1/5/10
Form Factor Mini-ITX, CEB
Socket Type LGA 2011-3
Launch Date 2013
LAN Speed Up to 2500Mbps
Audio 2.1 Channels

In essence, for organizations or users seeking a cost-effective yet powerful NAS solution, this CPU and motherboard combo remains compelling. The Intel Xeon E5-2680 v4, despite its age, is a testament to enduring performance in server environments. Users leveraging this processor for a NAS will find it to be a cost-effective solution that capably handles storage demands, making it an excellent value for its price point. To explore more about this processor’s capabilities and see how it might fit into your NAS plans, you can visit the Intel specifications page.

Where to Buy the X99 ITX Motherboard Combo in 3 Configs Here:
  • Check AliExpress:
  • X99 Motherboard +  E5-2680 V.4 CPU = $129  HERE
  • X99 Motherboard + 32GB RAM = $158 HERE
  • X99 Motherboard +  E5-2680 V.4 CPU + 32GB RAM = $176  HERE


Best CPU+ Motherboard for High Speed M.2 NVMe Slots + PLEX – The Erying 13900HK CPU+Mobo Combo

Spec Highlights – ERYING DIY ITX Desktop Motherboard Set with Onboard 14 Core / 20 Thread CPU i9-13900HK, 3x M.2 NVMe (Gen 4 and Gen 3), PCIe 4×8 Slot, 2.5G+1G Port, USB-C, DDR5 Memory $419 on AliExpress

Designed for NAS builders focusing on media servers or intensive computing tasks. The Erying i9 combo, equipped with a 13th Gen Intel Core processor and a Mini-ITX motherboard, features three M.2 NVMe slots and is optimized for graphic-intensive operations. It’s ideal for Plex servers and virtualization.

The Intel Core i9-13900HK processor bundled with this motherboard is a top-tier choice for a NAS setup, especially for a Plex Media Server. Its high-speed multi-core performance, reaching up to 5.40 GHz with Intel’s Turbo Boost Technology, is ideal for on-the-fly transcoding, ensuring seamless media streaming across devices. This is particularly beneficial for users who require their NAS to handle high-resolution video transcoding, a task that the i9-13900HK can manage with ease due to its robust processing capabilities and advanced integrated graphics.

The motherboard’s triple M.2 NVMe slots are a game-changer for NAS configurations, offering not just ample storage potential but also blistering data access speeds. NVMe technology excels in high-demand scenarios, such as multiple simultaneous accesses to the NAS, which is common in VM / Container environments. Users can leverage these slots to set up a RAID configuration, allowing for either performance enhancement through striping or data redundancy for added security.

 

Moreover, the Intel Core i9-13900HK comes with Intel’s UHD Graphics, which supports 4K resolution at 60Hz over HDMI and DisplayPort outputs. This graphical prowess, in combination with the processor’s ability to support fast memory, adds to the NAS’s capability as a potent media server that can handle 4K content playback and transcoding without breaking a sweat.

Specification Detail
Processor 13th Gen Intel Core i9-13900HK, up to 5.40 GHz
Graphics Integrated Intel Iris Xe Graphics
Memory Support DDR5, 2 slots, up to 96GB
Storage Options 3x M.2 slots (NVMe), 2x SATA 3 Ports
Expansion Slots 1x PCIe 4.0 x4, 1x PCIe 4.0 x8
Network 2x Onboard RJ45, WiFi
Audio 5.1 Channels
Back I/O Ports 2x USB 3.2/3.1 Gen 1, DisplayPort, 4x USB 2.0, HDMI 2.0, 3x Audio Jacks
USB Support USB 2.0, USB 3.0
RAID Support No
Form Factor Mini-ITX
Chipset Intel Others
Socket Type Onboard CPU
Brand Name ERYING
Origin Mainland China
Certifications RoHS, FCC, CE

Finally, while this CPU+Motherboard combo is positioned as an advanced solution for NAS setups, its high-end specifications suggest that it is overqualified for just storage purposes. The presence of the latest connectivity options, robust I/O support, and high-bandwidth LAN ports make it well-suited for a variety of other intensive applications, including gaming, content creation, and design. This versatility ensures that the investment in such a setup can be justified across multiple use cases beyond a typical NAS. For detailed processor specifications and capabilities, further information can be explored on Intel’s official product specifications page.

Bottom Line, there are going to be users who are looking at how expensive ‘turnkey’ NAS solutions can cost, then see what just the hardware parts would cost in a DiY alternative. For example, below is the cost of a fully specced out QNAP Intel Core build vs the cost fo JUST the CPU and Motherboard in the Erying board:

Needless to say, this is not a completely fair comparison. The QNAP includes all the building, the software, the PSU, cables, case, testing and all under a single warranty. Still, it IS food for thought for those that are happy to build their own NAS and save some $$$s.

Where to Buy the Erying Intel Mobo Combo (3 Versions):
  • Check AliExpress:
  • Erying 13th Gen i9 Combo 14C / 20T $459  HERE
  • Erying 12th Gen I9 Combo 14C / 20T $389 HERE
  • Erying 11th Gen i7 8C / 16T = $262  HERE

C = Cores , T = Threads


Best POWER + Storage CPU+Motherboard M-ITX Combo – The Intel 13th Gen The Minisforum AR900i (4x M.2 4×4 and 5×16 PCIe)

Spec HighlightsIntel® Core™ i9-13900HX Processor, 24 C/32 T (36M Cache, up to 5.4 GHz) Intel® UHD Graphics for 13th Gen Intel® Processors, SODIMM DDR5 Slots×2, up to 5600 MT/s, Max 64GB, 4×M.2 2280 PCIe4.0 x4, SSD Slots PCIe 5.0 X16 connector, 1x 2.5GbE and Lack of SATA AGAIN!   Check on AliExpress and $399 on Amazon

The Minisforum AR900i motherboard, in combination with the potent Intel® Core™ i9-13900HX CPU, forms a formidable base for power users. The AR900i is a Mobile Desktop (MoDT) motherboard that leverages the might of the 13th Gen Intel® flagship CPU, providing an exceptional 24 cores and 32 threads for heavy multitasking and demanding applications. Notably, the four M.2 2280 PCIe4.0 SSD slots are designed for rapid storage with RAID capabilities, reflecting a setup intended for high-speed operations and data security. The motherboard’s inclusion of SFF-8643 connectors represents an innovative shift away from static SATA ports, offering a dynamic and scalable solution for storage expansion. This approach is particularly beneficial for custom builds that require a neat cable management system and the flexibility to adjust storage configurations with ease. The PCIe 5.0 X16 slot on this motherboard is a forward-thinking feature, catering to the latest and most powerful GPUs and ensuring that the system is ready for the next generation of graphics and expansion cards.

However, it’s important to consider the networking capabilities of the AR900i. With only a single RJ45 2.5G Ethernet port, users who need enhanced networking may have to invest in a PCIe 5.0 compatible NIC, potentially sacrificing the valuable high-speed slot that could be used for other high-performance components. This choice underscores the need to balance the motherboard’s impressive storage and expansion capabilities with networking needs. The AR900i represents Minisforum’s dedication to compact, high-performance computing solutions. With support for triple-screen displays up to 8K, built-in AX210 wireless card for WiFi 6E, and Bluetooth 5.3, this motherboard offers comprehensive connectivity options for a variety of uses, from gaming to professional creative workstations.

Specification Category Details
Processor Intel® Core™ i9-13900HX, 24 Cores/32 Threads (36M Cache, up to 5.4 GHz)
GPU Intel® UHD Graphics for 13th Gen Intel® Processors
Chipset Intel® HM770 Chipset
Memory DDR5 Dual channel (SODIMM Slots×2, up to 5600 MT/s, Max 64GB)
Storage 4×M.2 2280 PCIe4.0 SSD Slots
Expansion Slot PCIe 5.0 X16 connector ×1
Wireless Connectivity M.2 2230 Key E Slot
Video Output HDMI2.0 ×1, DisplayPort1.4 ×1, USB-C ×1
Audio Output HDMI2.0 ×1, DisplayPort1.4 ×1, USB-C ×1, Line Out ×1
Ethernet RJ45 2.5G Ethernet Port×1
USB Ports USB3.2 Gen2 Type-C Port ×1 (Alt DP), USB3.2 Gen2 Type-A Port ×2, USB2.0 Type-A Port ×2
I/O Ports 4-pin CPU Fan header ×1, 4-pin System Fan header ×2, 4-pin SSD Fan header ×1, USB 3.2 Gen 2 header ×1, Front Panel Audio header ×1, System Panel header ×1
Form Factor Mini-ITX Form Factor (170x170mm)

The Intel® Core i9-13900HX processor, with its 24 cores and 32 threads, is a powerhouse suitable for a DIY NAS setup geared towards enthusiasts and professionals requiring robust performance for tasks such as media transcoding, file serving, and hosting complex databases. The processor’s 36M cache and peak speeds of up to 5.4 GHz ensure that multiple operations can be handled efficiently, supporting a smooth and responsive network storage experience. The addition of Intel UHD Graphics for 13th Gen Intel® Processors also allows for hardware-accelerated video encoding and decoding, which can be a significant advantage for a NAS serving as a media server. In terms of memory, the system’s support for DDR5 dual-channel RAM, with speeds up to 5600 MT/s and a maximum capacity of 64GB, provides ample bandwidth and storage for running a NAS operating system along with any additional services. This is particularly important for a NAS that may be handling simultaneous data-intensive tasks. The four M.2 2280 PCIe4.0 SSD slots offer high-speed storage options, ideal for caching or fast data access needs, enhancing the overall performance and speed of the NAS.

The connectivity options of this setup are also noteworthy. The motherboard’s Mini-ITX form factor is well-suited for NAS builds, where space efficiency is often a priority. The inclusion of a PCIe 5.0 X16 expansion slot allows for additional upgrades, such as adding a dedicated network interface card for improved network throughput or additional storage controllers if the four M.2 slots are insufficient. The onboard 2.5G Ethernet port provides a faster-than-gigabit connection, beneficial for transferring large files over the network. With a comprehensive range of I/O ports, including USB3.2 Gen2 and USB-C, the system can accommodate a variety of peripherals and external drives, making it a versatile choice for a DIY NAS setup.

 

Where to Buy the Intel 13th Gen i9 The Minisforum AR900i CPU + M-ITX Motherboard Combo:
  • Check AliExpress ($289-349 with Memory) HERE
  • Check Amazon ($399 NOW) HERE

 

 



Best Cheap CPU+MoBo+SSD+RAM Combo – The Topton N6005 CPU+Mobo Combo

Spec Highlights – Topton NAS Motherboard N6005, 4x Intel i226-V 2.5G Nics, Dual M.2 NVMe, Six SATA3.0, 2*DDR4 SODIMM, HDMI2.0, Mini ITX / M-ITX- $261 on AliExpress ($399 for 32GB DDR4 RAM and 1TB M.2 NVMe Included – see image below)

The Topton N6005 combo offers excellent value, combining an Intel Pentium N6005 processor, motherboard, 16GB RAM, and an NVMe OS SSD. Its popularity stems from its low cost and high performance, suitable for a variety of DIY NAS builds.

Component Specification
CPU Integrated Jasper Lake Intel Celeron N6005
RAM 2x SO-DIMM DDR4 slots, up to 64GB (2400/2666/2933MHz)
Storage 2x M.2 NVMe 2280 slots (PCIe 3.0 x1), 6x SATA 3.0 ports
Network 4x Intel i226-V 2.5Gbps network interfaces
Form Factor Mini-ITX (17.0 cm x 17.0 cm)
System Support Microsoft® Windows 10/11 64-bit, Linux
Main Characteristics – Matte Black PCB
– High-density moisture-proof fiber circuit board
– Full protection (USB, audio source, network interface)
GPU Integrated Intel UHD Graphics (24EUs for N5105, 32EUs for N6005)
IO Ports 2x USB 3.0, 4x USB 2.0, 1x HDMI, 1x DP
LAN 4x RJ-45 2.5G NET
Additional Features – Auto power-on, Wake-On-LAN, PXE support
Structure Solid Capacitor Design

Priced at $261 on AliExpress, and $399 when bundled with 32GB DDR4 RAM and a 1TB M.2 NVMe SSD, the Topton N6005 motherboard combo stands out for its affordability. This price point makes it an accessible entry for enthusiasts and professionals alike who are looking to build a high-performance NAS without incurring exorbitant costs. The inclusion of substantial RAM and fast NVMe storage in the bundle further adds to the value, offering what one might need for a robust NAS setup at a price that challenges many competitors in the market.

The CPU, an Intel Celeron N6005, is a Jasper Lake processor that strikes a balance between efficiency and capability. With a base frequency of 2.0 GHz and a burst frequency of up to 2.9 GHz across its four cores, it’s engineered to handle the multitasking demands of a NAS system. The 10W TDP reflects a design optimized for low power consumption, making it an economical choice for 24/7 operation, a critical consideration for NAS systems which are expected to be always on.

On the storage front, the Topton N6005 shines with two M.2 NVMe PCIe 3.0 x1 2280 slots for high-speed data transfer and six SATA3 6Gb/s ports for ample storage capacity. This allows users to install fast NVMe drives for the operating system and frequently accessed files, while the SATA ports can host larger hard drives for bulk storage. Such a combination is perfect for a NAS system, providing quick access to data and large storage pools for backup, media libraries, or network file sharing. If you are considering the Topton N6005 CPU+Motherboard combination for PLEX Media Server, I made a dedicated video on this using this CPU/Mobo in the Jobsno N2 NAS Case below, testing 4K Multimedia:

The Topton N6005 has garnered popularity among NAS builders for several reasons. It offers a mini-ITX form factor, which is ideal for compact builds, and includes four 2.5Gbps Intel i226-V network interfaces, enhancing its functionality as a home or small office server. Additionally, the CPU’s support for up to 64GB of DDR4 RAM means it can handle more demanding NAS tasks, such as running virtual machines or hosting databases. These features, coupled with its energy efficiency and expandability, make the Topton N6005 a sought-after component for building versatile and powerful NAS systems.

Where to Buy the TopTon N6005 Motherboard
  • Check AliExpress:
  • Intel N6005 + Motherboard = $229 HERE
  • Intel N6005 + Motherboard + 8GB RAM + 128GB SSD = $275 HERE
  • Intel N6005 + Motherboard + 32GB RAM + 1TB SSD = $399 HERE
  • AMAZON – Intel N6005 + Motherboard = $169 HERE


Disclaimer – The Jonsbo N1, N2 and N3 are STILL the Best NAS Enclosures

Jonsbo’s range of NAS enclosures stands out as an industry benchmark for those keen on custom desktop NAS builds. These enclosures seamlessly blend aesthetics with functionality, showcasing a meticulous design ethos that addresses both the visual and technical demands of modern users. The build quality is exceptional, employing high-grade materials that not only ensure durability but also aid in efficient heat dissipation, a critical factor for continuous NAS operations. Furthermore, Jonsbo has consistently demonstrated a forward-thinking approach by incorporating features that cater to future expansion and adaptability. Their user-friendly design ensures easy installation and maintenance, making them a preferred choice for both novices and seasoned builders. Backed by positive user reviews and a reputation for reliability, Jonsbo NAS enclosures are, without a doubt, one of the best investments for those aiming to craft a high-performance, custom desktop NAS system.

Jonsbo N1 5/6 Bay

Price (9/23) $96

Jonsbo N2 5/6 Bay

Price (9/23) $89

Jonsbo N3 5/6 Bay

Price (9/23) $92


Recommended Add-ons and Extras to Remember for Your DiY NAS Build

Building a NAS involves more than just the CPU and motherboard; enclosures, memory, PSUs, and other accessories are essential. Future guides will detail these components, alongside recommendations for smaller, crucial accessories to enhance your DIY NAS server’s functionality.

 

M.2-to-6xSATA Adapter ($10-15) – HERE on AliExpress or HERE on Amazon.com

PCie Card to Add 4x M.2 to Your Mobo $20-50 (Check Lane/Speed of Mobo and Compatibility First) – HERE on AliExpress or HERE on Amazon.com

Compatible CPU Cooler (CPU Dependant)  $25-50- HERE on AliExpress or HERE on Amazon.com

SATA Fan Out Cable – HERE on AliExpress or HERE on Amazon.com


Here is our article on the BEST (and worst) NAS Enclosures and Cases you can find on AliExpress for your DiY NAS Build. Click the banner below to read the article, alternatively, you can watch the detailed video HERE. Alternatively, you can watch a video on the best and worst NAS enclosures on Amazon here instead.


📧 SUBSCRIBE TO OUR NEWSLETTER 🔔
[contact-form-7]
🔒 Join Inner Circle


Get an alert every time something gets added to this specific article!


Want to follow specific category? 📧 Subscribe

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions
If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
 
Or support us by using our affiliate links on Amazon UK and Amazon US
    
 
Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

 

Build Your Own NAS vs Turnkey NAS – Which Should You Buy in 2024?

Par : Rob Andrews
16 février 2024 à 15:00

DIY NAS vs Turnkey NAS: Which is Best for You?

Today, we’re going to try and quickly and (bluntly) answer a key question in the world of network-attached storage: should you build your own NAS (DIY) or opt for a turnkey solution in 2024? This topic has been hotly debated in our recent video, “Build Your Own NAS vs Turnkey NAS – Which Should You Buy in 2024?”, and we’re here to delve deeper into this discussion with a comprehensive analysis.

Note – We delve into this debate, analyzing the pros and cons of each approach. Watch our detailed discussion here.

In a rush? Let’s Cut to the chase!

If you’re in a rush and simply want to know about the best CPU and motherboard combo to build your best DIY NAS system, below, you can find direct links to each of these bundles that can be purchased predominantly on AliExpress, but some of these options are also available on retailers such as Amazon and Newegg. If you were going to shop at these retailers anyway, why not use the links below as it will ensure that we act as comparers could earn a small fee from these shops. It allows us to keep doing what we do.

Here are ALL the Motherboard+CPU Combos that we cover in this article:

  • (The Best) i3-N305 M-ITX BoardCheck AliExpress ($289-349 with Memory) HERE and Amazon HERE
  • (x4 m.2 @ Gen 4×4) The Minisforum AR900i CPU + M-ITX Motherboard Combo ($399) Amazon HERE
  • (Best for PLEX) Erying 13th Gen i9 Combo 14C / 20T $459  HERE
  • (Gen 5 M-ITX) MINISFORUM BD770i ITX Motherboard $489 (AliExpress) HERE and $399 (Amazon) HERE
  • (Plex Alternative #1) Erying 12th Gen I9 Combo 14C / 20T $389 HERE
  • (ECC M-ITX Combo) CWWK 8-Bay / 9-Bay Board AMD-7735HS/7840HS/8845HS/7940HS $489 (AliExpress) HERE
  • (Plex Alternative #2) Erying 11th Gen i7 8C / 16T = $262  HERE
  • (Best Storage) X99 Motherboard + 32GB RAM = $158 HERE or E5-2680 V.4 CPU + 32GB RAM = $176  HERE
  • (Best Value) Intel N6005 + Motherboard = $229 HERE
  • (Best Value EXTRA) Intel N6005 + Motherboard + 8GB RAM + 128GB SSD = $275 HERE
  • AMAZON – Intel N6005 + Motherboard = $169 HERE

Cost Considerations

DIY NAS: The primary allure of constructing a DIY NAS system lies in its potential for cost savings. By selecting and purchasing individual components, enthusiasts can often build a system that outperforms entry-level commercial NAS units at a similar or lower price point. For example, by choosing a budget-friendly CPU that still meets performance requirements, such as an AMD Ryzen 3 or an Intel Pentium processor, and pairing it with affordable but reliable storage drives, users can significantly reduce costs. However, the economical aspect extends beyond initial setup; a DIY NAS’s running costs, including power consumption and potential upgrades, need careful consideration. While the hardware might be less expensive initially, software choices (free vs. paid NAS operating systems) and the potential need for future hardware upgrades to meet evolving storage demands can add to the total cost of ownership.

A Great example is HERE, the ERYING i9 Motherboard on Aliexpress – £387 for the Motherboard, an Intel 12th Gen i9 CPU pre-fitted and 16GB of DIMM Memory (Click to see on AliExpress)

Turnkey NAS: In contrast, turnkey NAS systems, such as those offered by Synology or QNAP, come with a higher upfront cost. This price not only encompasses well-integrated hardware and software but also the convenience of professional support and warranty services. The premium paid for a turnkey solution is often justified by the inclusion of proprietary software features, such as advanced backup solutions, multimedia streaming capabilities, and user-friendly security enhancements. For instance, Synology’s DiskStation Manager (DSM) offers a suite of applications for data management and security that can appeal to users looking for an out-of-the-box solution. Additionally, the long-term value of customer support and firmware updates that keep the system secure and functional over time cannot be understated.

Skill and Time Investment

DIY NAS: Building a NAS requires a notable investment of time and technical skill. The process involves selecting compatible components, assembling the hardware, and installing and configuring the operating system. For tech enthusiasts, this project offers an opportunity to learn and customize every aspect of their system, from the network settings to data management and security protocols. The DIY path can be particularly rewarding for those who enjoy troubleshooting and optimizing their setups. For example, choosing the right RAID configuration for your needs—be it RAID 1 for redundancy or RAID 5 for a balance of redundancy and storage efficiency—requires understanding the implications of each choice on performance and data safety.

Method Turn-Key NAS (Synology/QNAP/etc) Build Your Own / DiY NAS
‘Out the Box’ Setup time

(i.e when it’s 100% setup complete and ready for day-to-day use)

20-30 Minutes for Build & Initialization

10mins to 12 Hours for RAID Synchronization (ZFS = Minutes, not hours)

60-120 Minutes for Build & Initialization

10mins to 12 Hours for RAID Synchronization (ZFS = Minutes, not hours)

I.T / Tech Skill Level Requirements

(Out of /10)

Synology = 2/10

QNAP 5/10

Asustor / Terramaster = 4/10

TrueNAS Core = 9/10

TrueNAS Scale = 7/10

UnRAID = 6 / 10

Monthly Maintenance

(Checking update, stability, logs, etc)

10-15 Minutes 20-30 Minutes
Expandability and Migration

(i.e Long term lifespan in Hardware)

Limited to 1st Party hardware and system limitations (i.e Synolgoy DS923+ supports 1x 5-bay expansion, nothing else. Also, Synology NAS HDD/SSDs can ONLY be used in a Synology NAS)

More Expansions on QNAP, via USB or SAS Expansion Cards

No hardware limitations (beyond actual 3rd party hardware compatibility)

Can migrate to new hardware easily and with limitless scalability (i.e, 1-1000 HDDs)

UnRAID much, MUCH more expandable than TrueNAS currently.

Warranty and Repairs

(Options if the event of Issues and/or System Failure)

2/3/5 Year Hardware Warranty, 1 Party (Brand)

Effective Lifetime Support and Warranty Included

Multiple Hardware Warranty to manage (Mobo, CPU, PSU, etc)

Community led Support (Forums, Reddit, etc)

Paid Support via TrueNAS/UnRAID Official Platforms)

Turnkey NAS: For those seeking a straightforward, time-saving option, turnkey NAS units are the clear choice. Brands like Synology and QNAP offer systems that are virtually plug-and-play, requiring minimal setup beyond initial configuration. This convenience is especially appealing in professional environments where time equals money. The user-friendly interfaces of turnkey NAS systems are designed with the non-technical user in mind, making tasks like creating user accounts, setting up file sharing, and managing backups as simple as a few clicks. This ease of use extends to maintenance and troubleshooting, which are often supported by extensive documentation and customer support services.

Flexibility and Freedom

DIY NAS: The most significant advantage of a DIY NAS is the unparalleled flexibility it offers. Users can handpick components to meet their specific performance, storage, and budgetary needs, creating a system that can grow and change with their requirements. For example, someone prioritizing media streaming might choose a CPU with strong transcoding capabilities, while another user might focus on maximizing storage capacity with a larger number of drive bays. This customizability extends to software, with a variety of free and open-source NAS operating systems available, such as FreeNAS (now TrueNAS CORE) or OpenMediaVault, which offer powerful features and plugins for a personalized setup.

Turnkey NAS: Turnkey solutions prioritize simplicity and reliability over customization. While these systems may offer less flexibility in terms of hardware and software modification, they are optimized for ease of use and stability. The integrated nature of hardware and software in turnkey NAS units ensures compatibility and performance, which is particularly beneficial for users who value a system that “just works.” However, some turnkey solutions still offer a degree of customization through modular designs that allow for easy hard drive swaps or expansions, as well as software ecosystems that support a range of applications and services.

Middle Ground Solutions

For individuals torn between the customization of DIY and the simplicity of turnkey solutions, there are products that blend these approaches. The Lincstation N1, ZimaCube, and Aoostar R1 represent a middle ground, offering pre-assembled hardware

Pre-built NAS Solutions with NO OS? Perfect Middle Ground?

For individuals torn between the customization of DIY and the simplicity of turnkey solutions, there are products that blend these approaches. The Lincstation N1, ZimaCube, and Aoostar R1 represent a middle ground, offering pre-assembled hardware with some level of customization still available. This section will delve deeper into these options and also introduce the concept of pre-built NAS solutions that come without an operating system, a category that bridges the gap between fully DIY projects and complete turnkey solutions. Pre-built NAS solutions without a pre-installed operating system offer a unique advantage. They eliminate the need for the user to source and assemble hardware components, a task that can be daunting for those without technical expertise. Yet, they still provide the flexibility to choose and install an OS that best fits the user’s needs, such as TrueNAS, OpenMediaVault, or even a customized Linux distribution. This approach allows users to benefit from the hardware reliability of a pre-built system while enjoying the software customization typically associated with a DIY NAS. For instance, TerraMaster and some lesser-known brands offer NAS units that come without proprietary software, enabling users to install third-party or open-source NAS software of their choice.

Comparing these pre-built, software-less NAS solutions to full DIY or complete turnkey solutions from Synology or QNAP reveals distinct pros and cons. On the one hand, they reduce the complexity and time required for a DIY build, since the hardware comes pre-assembled and tested for compatibility and performance. This can be a significant advantage for users who are confident in their ability to manage software but hesitant about building hardware from scratch. On the other hand, these solutions lack the out-of-the-box readiness of turnkey products, requiring users to invest time in selecting, installing, and configuring an operating system and any additional software. The primary advantage of these middle-ground NAS solutions is their potential for customization without the need to commit to the full DIY process. Users can tailor the system’s software to their precise requirements, optimizing for performance, security, or specific functionalities, while avoiding the potential pitfalls of hardware compatibility issues. However, this approach comes with its own set of challenges, including the need for a certain level of technical expertise to select and install the NAS operating system and manage system configuration and maintenance. Unlike turnkey solutions, which offer comprehensive customer support and software updates, users of pre-built NAS systems without pre-installed software must rely on community support or their own skills to troubleshoot issues and update software.

Pre-built NAS solutions without included software present an appealing option for those who seek a balance between customization and convenience. They offer a foundation that saves users from the complexities of hardware assembly, while still providing the freedom to choose and install preferred software, a feature that attracts users who desire a personalized setup but are not ready to embark on a full DIY project. This middle ground offers a compromise that can satisfy a broad range of needs, bridging the gap between the simplicity and support of turnkey solutions and the customization and learning opportunities of a DIY approach.

Conclusion – Which Should You Choose? DiY or Turnkey?

The decision between DIY and turnkey NAS solutions ultimately depends on your personal preferences, technical skills, and specific needs. If you’re a tech enthusiast with a penchant for customization, a DIY NAS offers an engaging project with flexibility and cost benefits. However, if convenience, support, and ease of use are your priorities, a turnkey NAS is the way to go. As you weigh your options, consider products that offer a middle ground, like the Lincstation N1, ZimaCube, or Aoostar R1. These solutions can provide a balance between customization and convenience, fitting the needs of a wider range of users. Remember, whether you build or buy, your NAS is a crucial part of your digital life. Choose the path that aligns with your skills, budget, and expectations for the best possible experience. Once again, the decision hinges on your preferences, skills, and needs. Tech enthusiasts might lean towards a DIY NAS for its flexibility, while those seeking convenience might prefer turnkey solutions. Consider middle-ground products for a balanced approach.

Best CPU+ Motherboard for a Premium Feature but Low Power Consumption NAS – The i3-N305 M-ITX Board

Spec Highlights – i3-N305, 4x Intel i226-V 2.5G Nics, 2x M.2 NVMe. 6x SATA, 1*DDR5 SODIMM, HDMI2.0 + DP – $289 on AliExpress

Currently, the “build your own” favorite across many forums, the new Intel N305 processor, an 8-core, eight-thread i3 processor, comes pre-installed on a Mini-ITX board. It not only provides a remarkably low 7-watt TDP when needed but also offers significant scalability in terms of both clock speed and power efficiency. The $289 N305 version of the CPU and Motherboard combo presents a practical and economical choice for commercial use (making it the perfect upgrade/alternative to the Topton N6005 / N5105 that was so popular last year for first time NAS DiY’ers). It is equipped with the Intel® Core™ i3-N305 Processor, which is a part of the Alder Lake-N series. This processor boasts eight cores and eight threads, with a max turbo frequency of 3.80 GHz, offering ample computing power for everyday tasks and certain commercial applications. The processor is fabricated using Intel 7 lithography technology, which is indicative of its advanced and efficient design.

Memory support on this combination is versatile, with the motherboard supporting a SO-DIMM DDR5 memory slot, compatible with frequencies of 4800/5200/5600MHz. Although the processor supports a maximum memory size of 16 GB, which is a consideration to keep in mind, the motherboard can handle up to 32 GB, potentially allowing for future upgrades if the board’s capacity is indeed supported by later CPU models or firmware updates.

The integrated graphics, Intel® UHD Graphics with 32 Execution Units, can dynamically operate at up to 1.25 GHz and support 4K content at 60Hz, making it suitable for high-definition displays and basic graphical tasks. Here’s the specification of the $289 N305 version of the CPU+Motherboard combo:

Specification Detail
Model Number NAS-N100-N305
Processor Brand Intel
Processor Models Intel® Alder Lake-N i3-N305 (up to 3.8 GHz)
Type MINI PC / PC Stick
Origin Mainland China
Brand Name YSJMNPC
Use Commercial
Memory – Support notebook DDR5 technology
– 1 SO-DIMM DDR5 slot
– Compatible with 4800/5200/5600MHz
– Max capacity: 32GB
Storage – 6 x SATA3.0 6Gb/s interface
– 2 x M.2 NVMe 2280
Graphics Card Integrated Card (depending on processor model)
Network Card 4 x Intel i226-V 2.5G RJ45 network port
I/O Panel – 2 x USB 2.0
– 1 x USB 3.0
– 1 x Type-C (2.0 rate)
– 1 x HDMI
– 1 x DP
– 4 x RJ45 2.5G network port
– 1 x AUDIO 3.5mm interface
Motherboard Features – Matte black PCB
– Moisture-free fiber 8-layer circuit
– Full protection (USB, audio, network)
TDP 9-15W
Structure MINI-ITX (17.0cm x 17.0cm)
Capacitor Design All solid capacitor
Expansion Slots 1 PCIe x1 (shared with 2nd M.2)
Onboard Interface – F_PANEL pin
– TPM pin (compatible with ASUS TPM module)
– USB2.0 pin
– CPU_FAN 4-pin (temperature control)
– SYS_FAN 4-pin (temperature control)
– 24+4 ATX power interface
Cooling – Compatible with 115X radiators
– Silent temperature-controlled radiator
– Support for two high-performance radiators

In terms of connectivity, the combo is well-equipped with a variety of interfaces, including multiple USB ports with different standards, HDMI 2.1, and DisplayPort 1.4 for video output, and an Intel i226-V 2.5G RJ45 network port for fast wired internet connections.

The inclusion of PCIe lanes and M.2 slots provides additional expansion capabilities, allowing for further customization and the addition of peripherals or storage solutions. The motherboard’s MINI-ITX form factor makes it a compact solution that can fit into small cases, suitable for workspaces with limited room. EASILY the easiest choice of all the NAS Mobo+CPU options on this list, as one of the newest, lowest in price – yet impressively powerful, despite its lower TDP.

Where to Buy the i3-N305 CPU + M-ITX Motherboard Combo:
  • Check AliExpress ($289-349 with Memory) HERE
  • Check Amazon HERE

 

Best 5 Bay NAS Build for Under/Around £250

This is often seen as the budget build for your Jonsbo N2 system. The list below provides a reasonably powerful Plex media server, the ability to run a compact and capable UnRAID server, a few robust container applications, and even lets you set up a combined NAS server and prosumer router using proxmox and pfSense, alongside your chosen open-source NAS software.

Jonsbo N2 + TopTon Intel n5105 Celeron / Pentium n6005 Build (+$35)
  • Jonsbo N2 Case £74.04 – Check Amazon HERECheck AliExpress HERE
  • Topton N5105 + 128GB NVMe + 4GB RAM £193.48 – Check Amazon HERECheck AliExpress HERE
  • SATA 6 Connector £4.19 – Check Amazon HERECheck AliExpress HERE
  • 400W SFX PSU £24.36 – Check Amazon HERECheck AliExpress HERE

£264.64 (128GB M.2 NVMe + 4GB RAM + 400W PSU)

(Optional/Swap) If you want to save some money:

  • Topton N5105 (NO EXTRAS) £159.82 – Check Amazon HERECheck AliExpress HERE
  • Cheaper 250W SFX PSU £13.15 – Check Amazon HERECheck AliExpress HERE
  • (needed for cheaper PSU) SATA to Molex Adapter £0.78 – Check Amazon HERECheck AliExpress HERE

£247.47 (no M.2 NVMe and Cheap PSU)

Note, you need an SSD for TrueNAS OS (USB for UnRAID)

(Component Prices and eShops – 9 Images):

This build, just a bit over 250 pounds, offers a well-built base system, 4 GB of memory to start, and an included gen 3 NVMe SSD for your boot drive. Additionally, it has four individual 2.5G Ethernet ports that can either be solely dedicated to your NAS or divided between your chosen NAS OS and router OS. If you’re on a tight budget or wish to save for storage media later, consider downsizing the PSU to a more economical 250-watt PSU and buying the memory separately. These minor tweaks might save you as much as 40 to 45 pounds, depending on the adjustments you decide on.

Pros:

  • Exceptionally affordable
  • Simple build as many components arrive pre-attached
  • Low power consumption
  • Several avenues for cost-saving
  • Components aren’t overcrowded, reducing heat concerns
  • Compatible with virtually every NAS OS available
  • Flexibility for dual OS to cover both NAS storage and prosumer router needs

Cons:

  • Underpowered for TrueNAS’s full feature set
  • Limited PCI lanes
  • Reduced M.2 NVMe support compared to other builds on this list
  • Not suited for extensive use or demanding business apps

Best Jonsbo N3 Build for Under £500

At this price point, things get serious! Even if you exclude storage media costs and focus on the NAS hardware itself, $500 is substantial for DIY enthusiasts, especially when considering the time spent building the device and buying components from various brands. But if you’re willing to spend up to $500 on your custom-built NAS system with the Jonsbo N3 case, you’ll find a decent amount of flexibility. The subsequent build balances both internal and external performance against your budget. Moreover, the configuration below is priced around $450, allowing you some leeway in either saving extra cash, adding storage, or upgrading existing components (e.g., memory or network ports).

Jonsbo N3 + Intel Core i5 12th Gen + 16GB RAM + 10GbE Build

  • Jonsbo N3 Case £94.25 – Check Amazon HERECheck AliExpress HERE
  • 2x SATA 6 Connector £4.19 (note only need 8x, but cheaper to buy 2×6) – Check Amazon HERECheck AliExpress HERE
  • 400W SFX PSU £24.36 – Check Amazon HERECheck AliExpress HERE
  • B660M ITX Motherboard £235.79 + Intel Core i5 12490F CPU + 16GB RAM – Check Amazon HERECheck AliExpress HERE
  • ARGB CPU Radiator Fan (LGA1700) £13.38 – Check Amazon HERECheck AliExpress HERE
  • (better option for CPU Fan) Noctua NH-L9x65 CPU Cooler £49 – Check Amazon HERECheck AliExpress HERE
  • X540-T2 Intel Chipset PCIe x8 Dual Copper RJ45 10Gbps £39.34 – Check Amazon HERECheck AliExpress HERE
  • Tbkoly Controller Card Motherboard Expansion Card 1 To 5 Port SATA £20.45 – Check Amazon HERECheck AliExpress HERE
  • (Optional) 2x M.2 NVMe PCIe 4 X 8 Card GLOTRENDS Dual M.2 PCIe 4.0 – Check Amazon HERECheck AliExpress HERE

Total $410.65 (i5 CPU + 16GB RAM + 2x10GbE + 400W PSU + Case + Cables)
Note, you need an SSD for TrueNAS OS (USB for UnRAID)

(Component Prices and eShops – 8 Images):

This design of this build is significantly more future-proof than its predecessor, but it comes with increased power consumption. The build takes advantage of newer generation PCIe lanes, boasts more cores than the previous design, and confidently supports adding top-tier NVMe SSDs to your storage system in the future. It’s essential to note that this build requires a more hands-on approach. The base network port will need an added network adapter card to expand ports or boost existing port bandwidth to 10G. Finding off-the-shelf motherboards in mITX form with numerous Ethernet and SATA ports that also support modern Intel Core processors can be challenging. Because this design demands an Intel i5 12th gen CPU, the motherboard only features four SATA connectors. The Jonsbo N3 case accommodates up to six SATA drives, so to maximize this on this motherboard, you’ll need a PCIe SATA card with two additional SATA ports. Another option is to buy a different motherboard that supports more SATA connectors but sacrifices network speed, CPU support, or other features.

Pros:

  • Lots of power for Plex and virtual machine use
  • Full support for all major NAS software platforms
  • Great for a medium or growing Plex media server
  • Support for 2x NVMe SSDs for cache, Plex metadata, and even a separate SSD volume
  • Option to upgrade to 10Gbe networking, depending on your future needs
  • Lots of room for RAM upgrades

Cons:

  • High power consumption and increased heat concerns
  • Requires an additional PCIe card to maximize SATA drives
  • Limited PCIe expansion due to the inclusion of a PCIe x1 and PCIe x4 slot
  • Reduced options for processor upgrades, given the choice of the motherboard

Best Power User NAS Build for £750-1000

For those who want to build a NAS that rivals even the best off-the-shelf models available today, the following $1000 build offers some incredible performance. With this budget, you can get a truly formidable Plex media server, a robust virtual machine host, and even full surveillance with support for over 40 cameras (assuming you’re using an appropriate NAS software platform). The Jonsbo N3 NAS build is a powerhouse, providing enough capability for nearly any home or small business task.

Jonsbo N3 + Gen4/5 MoBo + Intel Core i5 12th Gen with Int Gfx + 32GB RAM + 10GbE Build

  • Jonsbo N3 Case £94.25 – Check Amazon HERECheck AliExpress HERE
  • 2X SATA 6 Connector £4.19 (note only need 8x, but cheaper to buy 2×6) – Check Amazon HERECheck AliExpress HERE
  • 600W SFX PSU £43.78 – Check Amazon HERECheck AliExpress HERE
  • Asrock Z690M-ITX/AX gEN 4/5 Motherboard £171.20 – Check Amazon HERECheck AliExpress HERE
  • Intel Core i5-12600K 12th Gen £239 – Check Amazon HERECheck AliExpress HERE
  • Re: CPU, features: 1 x 2.5 Gigabit LAN
    802.11ax Wi-Fi 6E Module
    1 x PCIe Gen5x16 Slot*
    4 x SATA3 6.0 Gb/s Connectors
    1 x Hyper M.2 Socket (M2_1, Key M), supports type 2280
    PCIe Gen4x4 (64 Gb/s) mode*
    • 1 x Hyper M.2 Socket (M2_2, Key M), supports type 2280
    SATA3 6.0 Gb/s & PCIe Gen4x4 (64 Gb/s) modes*
    * Supports NVMe SSD as boot disks
    * Supports ASRock U.2 Kit
  • Corsair VENGEANCE LPX DDR4 RAM 32GB (2x16GB) £59.99 – Check Amazon HERECheck AliExpress HERE
  • ARGB CPU Radiator Fan (LGA1700) £13.38 – Check Amazon HERECheck AliExpress HERE
  • (better option for CPU Fan) Noctua NH-L9x65 CPU Cooler £49 – Check Amazon HERECheck AliExpress HERE
  • X540-T2 Intel Chipset PCIe x8 Dual Copper RJ45 10Gbps £39.34 – Check Amazon HERECheck AliExpress HERE
  • Tbkoly Controller Card Motherboard Expansion Card 1 To 5 Port SATA £20.45 – Check Amazon HERECheck AliExpress HERE
  • (Optional) 2x M.2 NVMe PCIe 4 X 8 Card GLOTRENDS Dual M.2 PCIe 4.0 – Check Amazon HERECheck AliExpress HERE

Total £586.63 (Amazon) + £144.76 (Aliexpress)
Note, you need an SSD for TrueNAS OS (USB for UnRAID)

(Component Prices and eShops – 9 Images):

At the core of this design is the Intel i7 12th gen CPU, boasting six cores and twelve threads. Complementing this, the motherboard has full support for up to 128GB DDR4 memory (with prices still fluctuating for such large kits). But even with 32GB or 64GB kits being relatively affordable, it provides an excellent base for this system. For networking, the base board has two 2.5GbE ports, with the option to upgrade to 10Gbe using a suitable PCIe network card. However, similar to the $500 build, you’ll need to make some compromises if you want to maximize SATA drive connectivity due to the limited SATA ports on the motherboard.

Pros:

  • Extremely powerful for almost any task you throw at it
  • Full support for major NAS software platforms and high-end features
  • Outstanding Plex media server performance
  • Abundant RAM support
  • Flexibility in networking, from 2.5Gbe up to 10Gbe

Cons:

  • High power consumption
  • Likely overkill for casual or home users
  • Requires additional PCIe card to maximize SATA drives
  • Significant heat production, making adequate cooling essential
  • Expensive

 

Conclusion:

Building a Jonsbo N2 NAS system is an exciting project, allowing you to tailor the system to your specific needs and budget. Whether you’re aiming for a budget-friendly media server or a high-powered machine for intensive tasks, the Jonsbo N2 case provides a solid foundation. Always remember that while building the hardware is crucial, choosing the right software and ensuring that it runs seamlessly is just as important. As the NAS market evolves, DIY solutions like the Jonsbo N2 builds will only become more prevalent, offering enthusiasts and professionals alike more flexibility and options. Happy building!

Jonsbo N2 NAS Build with TopTon Board Build (Complete Guide) – UnRAID/TrueNAS (click below)

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔
[contact-form-7]
🔒 Join Inner Circle

Get an alert every time something gets added to this specific article!


Want to follow specific category? 📧 Subscribe

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions
If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
 
Or support us by using our affiliate links on Amazon UK and Amazon US
    
 
Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

 

(UPDATED) Best CPU+Motherboard Combo for Your M-ITX NAS Build – ECC, PCIe Gen 5, 4×4 NVMe and More

Par : Rob Andrews
23 février 2024 à 18:00

CPU and Motherboard Bundles to Build a DiY NAS (UPDATED)

It’s fair to say that the DIY NAS construction journey has seen remarkable simplification over the past ten years. With a variety of custom cases hitting the market, designed to help you create a streamlined personal cloud, and the advent of bundled compact ITX motherboards that streamline the assembly, crafting your own NAS is more accessible than ever. Nonetheless, it’s not entirely plug-and-play; while assembling the hardware has become more straightforward, selecting compatible components remains a technical challenge, often mired in jargon. For those looking to build a NAS tailored to specific needs, whether it’s high performance, media hosting with Plex, business applications, or personal use, I have a few CPU and motherboard pairings to suggest. These combinations are chosen with different user priorities in mind, ensuring that your build-your-own NAS project aligns with your intended use.

In a rush? Let’s Cut to the chase!

If you’re in a rush and simply want to know about the best CPU and motherboard combo to build your best DIY NAS system, below, you can find direct links to each of these bundles that can be purchased predominantly on AliExpress, but some of these options are also available on retailers such as Amazon and Newegg. If you were going to shop at these retailers anyway, why not use the links below as it will ensure that we act as comparers could earn a small fee from these shops. It allows us to keep doing what we do.

 

Here are ALL the Motherboard+CPU Combos that we cover in this article:

  • (The Best) i3-N305 M-ITX BoardCheck AliExpress ($289-349 with Memory) HERE and Amazon HERE
  • (x4 m.2 @ Gen 4×4) The Minisforum AR900i CPU + M-ITX Motherboard Combo ($399) Amazon HERE
  • (Best for PLEX) Erying 13th Gen i9 Combo 14C / 20T $459  HERE
  • (Gen 5 M-ITX) MINISFORUM BD770i ITX Motherboard $489 (AliExpress) HERE and $399 (Amazon) HERE
  • (Plex Alternative #1) Erying 12th Gen I9 Combo 14C / 20T $389 HERE
  • (ECC M-ITX Combo) CWWK 8-Bay / 9-Bay Board AMD-7735HS/7840HS/8845HS/7940HS $489 (AliExpress) HERE
  • (Plex Alternative #2) Erying 11th Gen i7 8C / 16T = $262  HERE
  • (Best Storage) X99 Motherboard + 32GB RAM = $158 HERE or E5-2680 V.4 CPU + 32GB RAM = $176  HERE
  • (Best Value) Intel N6005 + Motherboard = $229 HERE
  • (Best Value EXTRA) Intel N6005 + Motherboard + 8GB RAM + 128GB SSD = $275 HERE
  • AMAZON – Intel N6005 + Motherboard = $169 HERE

ECC CPU+Motherboard M-ITX Combo – The CWWK 8-Bay / 9-Bay Board AMD-7735HS/7840HS/8845HS/7940HS

Spec Highlights4x AMD MobileRyzen Options, SODIMM DDR5 Slots×2, ECC Supported, 2×M.2 2280 4×2 SSD Slots, PCIe 4×8 connector ×1 (x16 Physical), SFF-8643 x2 Connectors for SATA III, 4x 2.5GbE, USB 4 (20Gbs Limits) , Internal USB 2.0 

CWWK = $488 on AliExpress , TOPTON = $489 on AliExpress and Check on Amazon

The combination of the AMD “Zen 4” architecture Ryzen™ 5/7/9 series processors with the Minisforum motherboard offers a high-performance platform that is particularly suitable for building a Network Attached Storage (NAS) server. The Mini-ITX form factor of the motherboard, compatible with 1700 series CPU coolers, ensures that it can fit into compact NAS cases while providing adequate cooling for the powerful processors housed within. In the realm of NAS servers, storage options and connectivity are key. The motherboard’s two M.2 NVMe (PCIe 4.0 x2) slots are ideal for high-speed storage drives that can handle intense read and write operations typical in a NAS environment. The inclusion of 2 * SFF-8643 sockets, which support up to four connections each and a total of 9 SATA 3.0, is an advanced feature that provides flexibility and scalability for storage expansion. This is particularly beneficial for NAS setups where large storage pools and redundancy (such as RAID configurations) are important.

Network connectivity is another critical aspect of NAS servers, and this motherboard delivers with its 4 * Intel i226-V 2.5G RJ45 UDE network ports, allowing for high-speed data transfer and network redundancy or link aggregation if required. However, the lack of 10GbE port might limit the network throughput if higher speeds are needed, in which case the PCIe Gen 5×16 slot could be employed for an additional network interface card, although this might be considered an inefficient use of this high-bandwidth expansion slot. Lastly, the wide array of USB ports, including USB3.2 Gen2 Type-C with a 20Gbps rate and additional USB3.2 and USB2.0 ports, adds to the versatility of this motherboard. The built-in set of USB3.2 pin sockets also allow for further expansion and connectivity options, essential for a NAS that may need to accommodate a variety of peripherals or provide additional data transfer interfaces.

Feature Category Specifications
Processor Support Equipped with AMD “Zen 4” architecture Ryzen™ 5/7/9 series high-performance processors
Form Factor 17×17 standard Mini-ITX form factor compatible with 1700 series CPU coolers
Expansion Slots 1 PCI-E x16 slot PCIe 4.0 x8 signal supports expansion of graphics card/network card, etc.
Storage 2 * M.2 NVMe (PCIe 4.0 x2) slots 2280 size
SATA Support 2 * SFF-8643 sockets support one to four via cable and support 9 SATA 3.0
Memory Dual-channel SO-DIMM DDR5 slot supports 5600MHz backward compatibility by default<br>Dual-channel SO-DIMM DDR5 slot supports server-grade ECC notebook strip
Networking 4 * Intel i226-V 2.5G RJ45 UDE network ports support AllinOne and other applications
Video Output HDMI+DP+Type-C triple display output supports 4K@60Hz
USB Ports 3 * USB3.2+1 Type-C (USB4) interface 20Gbps rate<br>Built-in set of USB3.2 pin sockets can be connected to the panel through connecting cables<br>Built-in two USB2.0 sockets support U disk encryption and other applications and partial system boot

Given these specifications, the Minisforum motherboard with an AMD Ryzen processor is well-equipped for a NAS server build, offering a balance of processing power, high-speed storage capabilities, and robust connectivity options.

Where to Buy the CWWK 8-Bay / 9-Bay Board AMD-7735HS/7840HS/8845HS/7940HS Motherboard Combo:
  • Check AliExpress ($489 with Memory) HERE
  • Check Amazon HERE

Best Gen 5 CPU+Motherboard Combo – MINISFORUM BD770i ITX Motherboard

Spec Highlights – BD770i-AMD Ryzen 7 7745HX, 8 Cores/16 Threads (5.1 GHz) OR BD790i-AMD Ryzen 9 7945HX, 16 Cores/32 Threads (up to 5.4 GHz), SODIMM DDR5 Slots×2 Max 64GB, 2×M.2 2280 PCIe5.0 SSD Slots, PCIe 5.0 X16 connector, 1x 2.5GbE and Lack of SATA! $489 on AliExpress and $399 on Amazon

The Minisforum BD770i and BD790i motherboard and CPU combo represents a cutting-edge solution for enthusiasts and professionals seeking powerful performance in a small footprint. With the BD770i featuring the AMD Ryzen™ 7 7745HX and the BD790i equipped with the AMD Ryzen™ 9 7945HX, these systems offer unparalleled processing power that caters to a wide range of demanding tasks, from advanced computational workloads to intensive multitasking scenarios. The AMD Radeon™ 610M GPU, integrated into both models, while not designed for high-end gaming, capably supports everyday graphics needs, including casual gaming, video streaming, and content creation, making this combo a versatile choice for various computing needs.

The inclusion of PCIe 5.0 support stands out as a significant advantage, offering double the bandwidth of its predecessor, PCIe 4.0. This enhancement ensures that users can take advantage of the fastest available SSDs and expansion cards, dramatically reducing load times and facilitating quicker data access. This forward-thinking feature ensures that the system is prepared to handle future technological advancements, making it a wise investment for tech enthusiasts looking to stay ahead of the curve. However, it’s important to note the absence of traditional SATA ports, which means users with SATA drives will need to consider alternatives such as SATA M.2 adapters or adding a PCIe card to accommodate these devices. This requirement might necessitate additional planning and investment for those who wish to integrate existing storage solutions into their new setup.

Specification BD770i BD790i
Processor AMD Ryzen™ 7 7745HX, 8 Cores/16 Threads<br>(32M Cache, up to 5.1 GHz) AMD Ryzen™ 9 7945HX, 16 Cores/32 Threads<br>(64M Cache, up to 5.4 GHz)
GPU AMD Radeon™ 610M AMD Radeon™ 610M
Memory DDR5 Dual channel<br>(SODIMM Slots×2, up to 5200 MT/s, Max 64GB) DDR5 Dual channel<br>(SODIMM Slots×2, up to 5200 MT/s, Max 64GB)
Storage 2×M.2 2280 PCIe5.0 SSD Slots 2×M.2 2280 PCIe5.0 SSD Slots
Expansion Slot PCIe 5.0 X16 connector ×1 PCIe 5.0 X16 connector ×1
Wireless Connectivity M.2 2230 Key E Slot M.2 2230 Key E Slot
Video Output HDMI2.0 ×1<br>DisplayPort1.4 ×1<br>USB-C ×1 HDMI2.0 ×1<br>DisplayPort1.4 ×1<br>USB-C ×1
Audio Output HDMI2.0 ×1<br>DisplayPort1.4 ×1<br>USB-C ×1<br>Line Out ×1 HDMI2.0 ×1<br>DisplayPort1.4 ×1<br>USB-C ×1<br>Line Out ×1
Ethernet RJ45 2.5G Ethernet Port×1 RJ45 2.5G Ethernet Port×1
USB Ports USB3.2 Gen2 Type-C Port ×1 (Alt DP)<br>USB3.2 Gen1 Type-A Port ×2<br>USB2.0 Type-A Port ×2 USB3.2 Gen2 Type-C Port ×1 (Alt DP)<br>USB3.2 Gen1 Type-A Port ×2<br>USB2.0 Type-A Port ×2
I/O Ports 4-pin CPU Fan header ×1<br>4-pin System Fan header ×2<br>4-pin SSD Fan header ×1<br>USB 3.2 Gen 1 header ×1<br>Front Panel Audio header ×1<br>System Panel header ×1 4-pin CPU Fan header ×1<br>4-pin System Fan header ×2<br>4-pin SSD Fan header ×1<br>USB 3.2 Gen 1 header ×1<br>Front Panel Audio header ×1<br>System Panel header ×1
Form Factor Mini-ITX Form Factor (170x170x1.6mm) Mini-ITX Form Factor (170x170x1.6mm)

A notable constraint in this powerful combo is the provision of a single RJ45 2.5G Ethernet port. While this port offers a solid network connection suitable for most applications, users with specialized networking needs or those looking to expand their network connectivity may find this limitation challenging. The necessity to potentially use the high-speed PCIe 5.0 slot for a network interface card upgrade, just to augment networking capabilities, could be seen as an inefficient use of this high-bandwidth resource. This situation highlights a trade-off between the advanced PCIe support and the flexibility in networking expansion, prompting users to carefully consider their priorities when planning their system configuration.

Despite these considerations, the overall package offered by the Minisforum BD770i and BD790i is compelling. The combination of cutting-edge CPU performance, robust PCIe 5.0 support, and a variety of connectivity options, including USB 3.2 ports and multiple video outputs, provides a solid foundation for a high-performance, compact computing solution. #

Furthermore, the support for up to 64GB of DDR5 memory and the inclusion of two M.2 2280 PCIe 5.0 SSD slots offer ample room for memory and storage expansion, enhancing the system’s capability to handle future needs. This blend of high-end features, coupled with the Mini-ITX form factor’s space efficiency, makes the BD770i and BD790i an attractive option for users seeking a powerful, yet manageable, computing platform.

 

Where to Buy the MINISFORUM BD770i ITX Motherboard Combo:
  • Check AliExpress ($489 with Memory) HERE
  • Check Amazon ($399) HERE

 


Best CPU+ Motherboard for a Premium Feature but Low Power Consumption NAS – The i3-N305 M-ITX Board

Spec Highlights – i3-N305, 4x Intel i226-V 2.5G Nics, 2x M.2 NVMe. 6x SATA, 1*DDR5 SODIMM, HDMI2.0 + DP – $289 on AliExpress

Currently, the “build your own” favorite across many forums, the new Intel N305 processor, an 8-core, eight-thread i3 processor, comes pre-installed on a Mini-ITX board. It not only provides a remarkably low 7-watt TDP when needed but also offers significant scalability in terms of both clock speed and power efficiency. The $289 N305 version of the CPU and Motherboard combo presents a practical and economical choice for commercial use (making it the perfect upgrade/alternative to the Topton N6005 / N5105 that was so popular last year for first time NAS DiY’ers). It is equipped with the Intel® Core™ i3-N305 Processor, which is a part of the Alder Lake-N series. This processor boasts eight cores and eight threads, with a max turbo frequency of 3.80 GHz, offering ample computing power for everyday tasks and certain commercial applications. The processor is fabricated using Intel 7 lithography technology, which is indicative of its advanced and efficient design.

Memory support on this combination is versatile, with the motherboard supporting a SO-DIMM DDR5 memory slot, compatible with frequencies of 4800/5200/5600MHz. Although the processor supports a maximum memory size of 16 GB, which is a consideration to keep in mind, the motherboard can handle up to 32 GB, potentially allowing for future upgrades if the board’s capacity is indeed supported by later CPU models or firmware updates.

The integrated graphics, Intel® UHD Graphics with 32 Execution Units, can dynamically operate at up to 1.25 GHz and support 4K content at 60Hz, making it suitable for high-definition displays and basic graphical tasks. Here’s the specification of the $289 N305 version of the CPU+Motherboard combo:

Specification Detail
Model Number NAS-N100-N305
Processor Brand Intel
Processor Models Intel® Alder Lake-N i3-N305 (up to 3.8 GHz)
Type MINI PC / PC Stick
Origin Mainland China
Brand Name YSJMNPC
Use Commercial
Memory – Support notebook DDR5 technology
– 1 SO-DIMM DDR5 slot
– Compatible with 4800/5200/5600MHz
– Max capacity: 32GB
Storage – 6 x SATA3.0 6Gb/s interface
– 2 x M.2 NVMe 2280
Graphics Card Integrated Card (depending on processor model)
Network Card 4 x Intel i226-V 2.5G RJ45 network port
I/O Panel – 2 x USB 2.0
– 1 x USB 3.0
– 1 x Type-C (2.0 rate)
– 1 x HDMI
– 1 x DP
– 4 x RJ45 2.5G network port
– 1 x AUDIO 3.5mm interface
Motherboard Features – Matte black PCB
– Moisture-free fiber 8-layer circuit
– Full protection (USB, audio, network)
TDP 9-15W
Structure MINI-ITX (17.0cm x 17.0cm)
Capacitor Design All solid capacitor
Expansion Slots 1 PCIe x1 (shared with 2nd M.2)
Onboard Interface – F_PANEL pin
– TPM pin (compatible with ASUS TPM module)
– USB2.0 pin
– CPU_FAN 4-pin (temperature control)
– SYS_FAN 4-pin (temperature control)
– 24+4 ATX power interface
Cooling – Compatible with 115X radiators
– Silent temperature-controlled radiator
– Support for two high-performance radiators

In terms of connectivity, the combo is well-equipped with a variety of interfaces, including multiple USB ports with different standards, HDMI 2.1, and DisplayPort 1.4 for video output, and an Intel i226-V 2.5G RJ45 network port for fast wired internet connections.

The inclusion of PCIe lanes and M.2 slots provides additional expansion capabilities, allowing for further customization and the addition of peripherals or storage solutions. The motherboard’s MINI-ITX form factor makes it a compact solution that can fit into small cases, suitable for workspaces with limited room. EASILY the easiest choice of all the NAS Mobo+CPU options on this list, as one of the newest, lowest in price – yet impressively powerful, despite its lower TDP.

Where to Buy the i3-N305 CPU + M-ITX Motherboard Combo:
  • Check AliExpress ($289-349 with Memory) HERE
  • Check Amazon HERE

Best CPU+ Motherboard+ Memory Combo for a Business File Server – The X99 Motherboard Kit (ITX)

Spec Highlights – Business X99 Motherboard Combo ITX LGA2011, C612 for NAS Router+File Server, 6×2.5GbE I226, 10xSATA, 1x M.2 (OS), 14Core / 28 Thread Intel Xeon E5-V3 V4- $176 on AliExpress

This combination is ideal for business users needing power and scalability. The X99 motherboard with an older Xeon CPU balances performance, connectivity, and storage expansion. It supports 10 SATA drives and a M.2 NVMe slot, alongside 15 gigabits of network bandwidth across six 2.5G Ethernet ports. The NAS CPU+Memory combo anchored by the Intel Xeon E5-2680 v4 is a robust solution for a NAS file server. The CPU’s 14 cores and 28 threads are engineered for multitasking and can efficiently manage the demands of multiple simultaneous data transactions, which is a common requirement in NAS setups. The motherboard’s ten SATA ports and an M.2 NVMe slot offer versatile and ample storage options, facilitating both high-capacity and high-speed data storage solutions. This combination of CPU power and storage flexibility makes it an excellent choice for a NAS system.

owever, the Intel Xeon E5-2680 v4 processor’s launch date in Q1’16 might give pause to some users considering the latest advancements in processor technology. While newer CPUs may offer improved power efficiency and the benefit of ongoing support from Intel, the E5-2680 v4 still holds its ground as a reliable workhorse. Its architecture, although not the newest, delivers steadfast performance which, alongside its competitive pricing, presents an exceptional value proposition for budget-conscious setups or where cutting-edge efficiency is not the primary concern.

Specification Details
Processor Intel Xeon E5-2680 v4, 14 cores, up to 3.30 GHz Turbo
Chipset Intel C612
Memory Support 2x DDR4 DIMM slots, up to 64 GB, supports ECC
Storage Options 1x M.2 NVMe, 10x SATA Ports
Expansion 1x PCIe 3.0 x16
Network 6x Intel i226 2.5 Gigabit Ethernet
Power Supply ATX 24 Pin + 8 Pin
Video Output VGA
RAID Support RAID 0/1/5/10
Form Factor Mini-ITX, CEB
Socket Type LGA 2011-3
Launch Date 2013
LAN Speed Up to 2500Mbps
Audio 2.1 Channels

In essence, for organizations or users seeking a cost-effective yet powerful NAS solution, this CPU and motherboard combo remains compelling. The Intel Xeon E5-2680 v4, despite its age, is a testament to enduring performance in server environments. Users leveraging this processor for a NAS will find it to be a cost-effective solution that capably handles storage demands, making it an excellent value for its price point. To explore more about this processor’s capabilities and see how it might fit into your NAS plans, you can visit the Intel specifications page.

Where to Buy the X99 ITX Motherboard Combo in 3 Configs Here:
  • Check AliExpress:
  • X99 Motherboard +  E5-2680 V.4 CPU = $129  HERE
  • X99 Motherboard + 32GB RAM = $158 HERE
  • X99 Motherboard +  E5-2680 V.4 CPU + 32GB RAM = $176  HERE


Best CPU+ Motherboard for High Speed M.2 NVMe Slots + PLEX – The Erying 13900HK CPU+Mobo Combo

Spec Highlights – ERYING DIY ITX Desktop Motherboard Set with Onboard 14 Core / 20 Thread CPU i9-13900HK, 3x M.2 NVMe (Gen 4 and Gen 3), PCIe 4×8 Slot, 2.5G+1G Port, USB-C, DDR5 Memory $419 on AliExpress

Designed for NAS builders focusing on media servers or intensive computing tasks. The Erying i9 combo, equipped with a 13th Gen Intel Core processor and a Mini-ITX motherboard, features three M.2 NVMe slots and is optimized for graphic-intensive operations. It’s ideal for Plex servers and virtualization.

The Intel Core i9-13900HK processor bundled with this motherboard is a top-tier choice for a NAS setup, especially for a Plex Media Server. Its high-speed multi-core performance, reaching up to 5.40 GHz with Intel’s Turbo Boost Technology, is ideal for on-the-fly transcoding, ensuring seamless media streaming across devices. This is particularly beneficial for users who require their NAS to handle high-resolution video transcoding, a task that the i9-13900HK can manage with ease due to its robust processing capabilities and advanced integrated graphics.

The motherboard’s triple M.2 NVMe slots are a game-changer for NAS configurations, offering not just ample storage potential but also blistering data access speeds. NVMe technology excels in high-demand scenarios, such as multiple simultaneous accesses to the NAS, which is common in VM / Container environments. Users can leverage these slots to set up a RAID configuration, allowing for either performance enhancement through striping or data redundancy for added security.

 

Moreover, the Intel Core i9-13900HK comes with Intel’s UHD Graphics, which supports 4K resolution at 60Hz over HDMI and DisplayPort outputs. This graphical prowess, in combination with the processor’s ability to support fast memory, adds to the NAS’s capability as a potent media server that can handle 4K content playback and transcoding without breaking a sweat.

Specification Detail
Processor 13th Gen Intel Core i9-13900HK, up to 5.40 GHz
Graphics Integrated Intel Iris Xe Graphics
Memory Support DDR5, 2 slots, up to 96GB
Storage Options 3x M.2 slots (NVMe), 2x SATA 3 Ports
Expansion Slots 1x PCIe 4.0 x4, 1x PCIe 4.0 x8
Network 2x Onboard RJ45, WiFi
Audio 5.1 Channels
Back I/O Ports 2x USB 3.2/3.1 Gen 1, DisplayPort, 4x USB 2.0, HDMI 2.0, 3x Audio Jacks
USB Support USB 2.0, USB 3.0
RAID Support No
Form Factor Mini-ITX
Chipset Intel Others
Socket Type Onboard CPU
Brand Name ERYING
Origin Mainland China
Certifications RoHS, FCC, CE

Finally, while this CPU+Motherboard combo is positioned as an advanced solution for NAS setups, its high-end specifications suggest that it is overqualified for just storage purposes. The presence of the latest connectivity options, robust I/O support, and high-bandwidth LAN ports make it well-suited for a variety of other intensive applications, including gaming, content creation, and design. This versatility ensures that the investment in such a setup can be justified across multiple use cases beyond a typical NAS. For detailed processor specifications and capabilities, further information can be explored on Intel’s official product specifications page.

Bottom Line, there are going to be users who are looking at how expensive ‘turnkey’ NAS solutions can cost, then see what just the hardware parts would cost in a DiY alternative. For example, below is the cost of a fully specced out QNAP Intel Core build vs the cost fo JUST the CPU and Motherboard in the Erying board:

Needless to say, this is not a completely fair comparison. The QNAP includes all the building, the software, the PSU, cables, case, testing and all under a single warranty. Still, it IS food for thought for those that are happy to build their own NAS and save some $$$s.

Where to Buy the Erying Intel Mobo Combo (3 Versions):
  • Check AliExpress:
  • Erying 13th Gen i9 Combo 14C / 20T $459  HERE
  • Erying 12th Gen I9 Combo 14C / 20T $389 HERE
  • Erying 11th Gen i7 8C / 16T = $262  HERE

C = Cores , T = Threads


Best POWER + Storage CPU+Motherboard M-ITX Combo – The Intel 13th Gen The Minisforum AR900i (4x M.2 4×4 and 5×16 PCIe)

Spec HighlightsIntel® Core™ i9-13900HX Processor, 24 C/32 T (36M Cache, up to 5.4 GHz) Intel® UHD Graphics for 13th Gen Intel® Processors, SODIMM DDR5 Slots×2, up to 5600 MT/s, Max 64GB, 4×M.2 2280 PCIe4.0 x4, SSD Slots PCIe 5.0 X16 connector, 1x 2.5GbE and Lack of SATA AGAIN!   Check on AliExpress and $399 on Amazon

The Minisforum AR900i motherboard, in combination with the potent Intel® Core™ i9-13900HX CPU, forms a formidable base for power users. The AR900i is a Mobile Desktop (MoDT) motherboard that leverages the might of the 13th Gen Intel® flagship CPU, providing an exceptional 24 cores and 32 threads for heavy multitasking and demanding applications. Notably, the four M.2 2280 PCIe4.0 SSD slots are designed for rapid storage with RAID capabilities, reflecting a setup intended for high-speed operations and data security. The motherboard’s inclusion of SFF-8643 connectors represents an innovative shift away from static SATA ports, offering a dynamic and scalable solution for storage expansion. This approach is particularly beneficial for custom builds that require a neat cable management system and the flexibility to adjust storage configurations with ease. The PCIe 5.0 X16 slot on this motherboard is a forward-thinking feature, catering to the latest and most powerful GPUs and ensuring that the system is ready for the next generation of graphics and expansion cards.

However, it’s important to consider the networking capabilities of the AR900i. With only a single RJ45 2.5G Ethernet port, users who need enhanced networking may have to invest in a PCIe 5.0 compatible NIC, potentially sacrificing the valuable high-speed slot that could be used for other high-performance components. This choice underscores the need to balance the motherboard’s impressive storage and expansion capabilities with networking needs. The AR900i represents Minisforum’s dedication to compact, high-performance computing solutions. With support for triple-screen displays up to 8K, built-in AX210 wireless card for WiFi 6E, and Bluetooth 5.3, this motherboard offers comprehensive connectivity options for a variety of uses, from gaming to professional creative workstations.

Specification Category Details
Processor Intel® Core™ i9-13900HX, 24 Cores/32 Threads (36M Cache, up to 5.4 GHz)
GPU Intel® UHD Graphics for 13th Gen Intel® Processors
Chipset Intel® HM770 Chipset
Memory DDR5 Dual channel (SODIMM Slots×2, up to 5600 MT/s, Max 64GB)
Storage 4×M.2 2280 PCIe4.0 SSD Slots
Expansion Slot PCIe 5.0 X16 connector ×1
Wireless Connectivity M.2 2230 Key E Slot
Video Output HDMI2.0 ×1, DisplayPort1.4 ×1, USB-C ×1
Audio Output HDMI2.0 ×1, DisplayPort1.4 ×1, USB-C ×1, Line Out ×1
Ethernet RJ45 2.5G Ethernet Port×1
USB Ports USB3.2 Gen2 Type-C Port ×1 (Alt DP), USB3.2 Gen2 Type-A Port ×2, USB2.0 Type-A Port ×2
I/O Ports 4-pin CPU Fan header ×1, 4-pin System Fan header ×2, 4-pin SSD Fan header ×1, USB 3.2 Gen 2 header ×1, Front Panel Audio header ×1, System Panel header ×1
Form Factor Mini-ITX Form Factor (170x170mm)

The Intel® Core i9-13900HX processor, with its 24 cores and 32 threads, is a powerhouse suitable for a DIY NAS setup geared towards enthusiasts and professionals requiring robust performance for tasks such as media transcoding, file serving, and hosting complex databases. The processor’s 36M cache and peak speeds of up to 5.4 GHz ensure that multiple operations can be handled efficiently, supporting a smooth and responsive network storage experience. The addition of Intel UHD Graphics for 13th Gen Intel® Processors also allows for hardware-accelerated video encoding and decoding, which can be a significant advantage for a NAS serving as a media server. In terms of memory, the system’s support for DDR5 dual-channel RAM, with speeds up to 5600 MT/s and a maximum capacity of 64GB, provides ample bandwidth and storage for running a NAS operating system along with any additional services. This is particularly important for a NAS that may be handling simultaneous data-intensive tasks. The four M.2 2280 PCIe4.0 SSD slots offer high-speed storage options, ideal for caching or fast data access needs, enhancing the overall performance and speed of the NAS.

The connectivity options of this setup are also noteworthy. The motherboard’s Mini-ITX form factor is well-suited for NAS builds, where space efficiency is often a priority. The inclusion of a PCIe 5.0 X16 expansion slot allows for additional upgrades, such as adding a dedicated network interface card for improved network throughput or additional storage controllers if the four M.2 slots are insufficient. The onboard 2.5G Ethernet port provides a faster-than-gigabit connection, beneficial for transferring large files over the network. With a comprehensive range of I/O ports, including USB3.2 Gen2 and USB-C, the system can accommodate a variety of peripherals and external drives, making it a versatile choice for a DIY NAS setup.

 

Where to Buy the Intel 13th Gen i9 The Minisforum AR900i CPU + M-ITX Motherboard Combo:
  • Check AliExpress ($289-349 with Memory) HERE
  • Check Amazon ($399 NOW) HERE

 

 



Best Cheap CPU+MoBo+SSD+RAM Combo – The Topton N6005 CPU+Mobo Combo

Spec Highlights – Topton NAS Motherboard N6005, 4x Intel i226-V 2.5G Nics, Dual M.2 NVMe, Six SATA3.0, 2*DDR4 SODIMM, HDMI2.0, Mini ITX / M-ITX- $261 on AliExpress ($399 for 32GB DDR4 RAM and 1TB M.2 NVMe Included – see image below)

The Topton N6005 combo offers excellent value, combining an Intel Pentium N6005 processor, motherboard, 16GB RAM, and an NVMe OS SSD. Its popularity stems from its low cost and high performance, suitable for a variety of DIY NAS builds.

Component Specification
CPU Integrated Jasper Lake Intel Celeron N6005
RAM 2x SO-DIMM DDR4 slots, up to 64GB (2400/2666/2933MHz)
Storage 2x M.2 NVMe 2280 slots (PCIe 3.0 x1), 6x SATA 3.0 ports
Network 4x Intel i226-V 2.5Gbps network interfaces
Form Factor Mini-ITX (17.0 cm x 17.0 cm)
System Support Microsoft® Windows 10/11 64-bit, Linux
Main Characteristics – Matte Black PCB
– High-density moisture-proof fiber circuit board
– Full protection (USB, audio source, network interface)
GPU Integrated Intel UHD Graphics (24EUs for N5105, 32EUs for N6005)
IO Ports 2x USB 3.0, 4x USB 2.0, 1x HDMI, 1x DP
LAN 4x RJ-45 2.5G NET
Additional Features – Auto power-on, Wake-On-LAN, PXE support
Structure Solid Capacitor Design

Priced at $261 on AliExpress, and $399 when bundled with 32GB DDR4 RAM and a 1TB M.2 NVMe SSD, the Topton N6005 motherboard combo stands out for its affordability. This price point makes it an accessible entry for enthusiasts and professionals alike who are looking to build a high-performance NAS without incurring exorbitant costs. The inclusion of substantial RAM and fast NVMe storage in the bundle further adds to the value, offering what one might need for a robust NAS setup at a price that challenges many competitors in the market.

The CPU, an Intel Celeron N6005, is a Jasper Lake processor that strikes a balance between efficiency and capability. With a base frequency of 2.0 GHz and a burst frequency of up to 2.9 GHz across its four cores, it’s engineered to handle the multitasking demands of a NAS system. The 10W TDP reflects a design optimized for low power consumption, making it an economical choice for 24/7 operation, a critical consideration for NAS systems which are expected to be always on.

On the storage front, the Topton N6005 shines with two M.2 NVMe PCIe 3.0 x1 2280 slots for high-speed data transfer and six SATA3 6Gb/s ports for ample storage capacity. This allows users to install fast NVMe drives for the operating system and frequently accessed files, while the SATA ports can host larger hard drives for bulk storage. Such a combination is perfect for a NAS system, providing quick access to data and large storage pools for backup, media libraries, or network file sharing. If you are considering the Topton N6005 CPU+Motherboard combination for PLEX Media Server, I made a dedicated video on this using this CPU/Mobo in the Jobsno N2 NAS Case below, testing 4K Multimedia:

The Topton N6005 has garnered popularity among NAS builders for several reasons. It offers a mini-ITX form factor, which is ideal for compact builds, and includes four 2.5Gbps Intel i226-V network interfaces, enhancing its functionality as a home or small office server. Additionally, the CPU’s support for up to 64GB of DDR4 RAM means it can handle more demanding NAS tasks, such as running virtual machines or hosting databases. These features, coupled with its energy efficiency and expandability, make the Topton N6005 a sought-after component for building versatile and powerful NAS systems.

Where to Buy the TopTon N6005 Motherboard
  • Check AliExpress:
  • Intel N6005 + Motherboard = $229 HERE
  • Intel N6005 + Motherboard + 8GB RAM + 128GB SSD = $275 HERE
  • Intel N6005 + Motherboard + 32GB RAM + 1TB SSD = $399 HERE
  • AMAZON – Intel N6005 + Motherboard = $169 HERE


Disclaimer – The Jonsbo N1, N2 and N3 are STILL the Best NAS Enclosures

Jonsbo’s range of NAS enclosures stands out as an industry benchmark for those keen on custom desktop NAS builds. These enclosures seamlessly blend aesthetics with functionality, showcasing a meticulous design ethos that addresses both the visual and technical demands of modern users. The build quality is exceptional, employing high-grade materials that not only ensure durability but also aid in efficient heat dissipation, a critical factor for continuous NAS operations. Furthermore, Jonsbo has consistently demonstrated a forward-thinking approach by incorporating features that cater to future expansion and adaptability. Their user-friendly design ensures easy installation and maintenance, making them a preferred choice for both novices and seasoned builders. Backed by positive user reviews and a reputation for reliability, Jonsbo NAS enclosures are, without a doubt, one of the best investments for those aiming to craft a high-performance, custom desktop NAS system.

Jonsbo N1 5/6 Bay

Price (9/23) $96

Jonsbo N2 5/6 Bay

Price (9/23) $89

Jonsbo N3 5/6 Bay

Price (9/23) $92


Recommended Add-ons and Extras to Remember for Your DiY NAS Build

Building a NAS involves more than just the CPU and motherboard; enclosures, memory, PSUs, and other accessories are essential. Future guides will detail these components, alongside recommendations for smaller, crucial accessories to enhance your DIY NAS server’s functionality.

 

M.2-to-6xSATA Adapter ($10-15) – HERE on AliExpress or HERE on Amazon.com

PCie Card to Add 4x M.2 to Your Mobo $20-50 (Check Lane/Speed of Mobo and Compatibility First) – HERE on AliExpress or HERE on Amazon.com

Compatible CPU Cooler (CPU Dependant)  $25-50- HERE on AliExpress or HERE on Amazon.com

SATA Fan Out Cable – HERE on AliExpress or HERE on Amazon.com


Here is our article on the BEST (and worst) NAS Enclosures and Cases you can find on AliExpress for your DiY NAS Build. Click the banner below to read the article, alternatively, you can watch the detailed video HERE. Alternatively, you can watch a video on the best and worst NAS enclosures on Amazon here instead.


📧 SUBSCRIBE TO OUR NEWSLETTER 🔔
[contact-form-7]
🔒 Join Inner Circle


Get an alert every time something gets added to this specific article!


Want to follow specific category? 📧 Subscribe

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions
If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
 
Or support us by using our affiliate links on Amazon UK and Amazon US
    
 
Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

 

CWWK AMD 7840HS CPU+Motherboard Combo Deep Dive

Par : Rob Andrews
1 mars 2024 à 15:00

CWWK AMD 7840HS NAS Motherboard – Any Good?

If you have been in the market for building your own NAS from scratch on a budget, then if you push past all the Intel Celeron, Pentium and Core CPU+Mobo combos that are flooded in the market, you might well come across this recently revealed AMD powered monster of a CPU+Motherbaord combination – The CWWK AMD-7840HS board. Arriving under several retailer brand (including Topton), this board arrives with an 8 Core CPU that can burst up to 5.1 Ghz, 2.7Ghz int. Gfx, 4x 2.5GbE, a PCIe Gen 4×8 slot, USB 4, 2x Gen 4×2 M,.2 slots an d support for up to 9 SATA drives. I mean.. WOW. The TDP is a little higher than some might like, the ECC support is up for debate (more on that later) and the 20 Lane CPU is definitely being spread out pretty wide – but there is no denying that this is a serious bot of kit. So, what exactly do you get when you pay $499+ for this SoC Mobile CPU and Motherboard combo? What’s the design like? And should you be considering this for your next TrueNAS Build? Let’s take a closer look at the AMD-7840HS NAS board.

Here are a few examples of where you can get this board online:

  • (Topton) 8-Bay / 9-Bay Board AMD-7940HS $489 (AliExpress) HERE
  • (Topton) The AMD-7940HS CPU+Board + 1TB NVMe + 32GB DDR5 + SFF Cables + CPU HS $729 (AliExpress) HERE
  • (KingNovy) Complete Board + AMD-7940HS $509 (AliExpress) HERE
  • Learn more about other Recommended M-ITX CPU+Mobo Combos HERE in an article or HERE on YouTube

Note – Performance Testing and NAS Building are still ‘WiP’ on this board as I wait for the last few components to arrive for YouTube. I will update this article with additional information resources after testing is concluded

Specification Detail
Architecture Zen 4 (Phoenix)
Cores / Threads 8 / 16
Base / Boost Frequency 3.8 GHz / 5.1 GHz
TDP (Thermal Design Power) 35 W (Configurable 35-54 W)
Memory Support DDR5, LPDDR5x up to 7500 MT/s; Dual-channel; ECC support (in specific configurations of CPU)
Integrated Graphics Radeon 780M; Graphics engine boost clock: 2700MHz
PCI-Express Gen 4, 20 Lanes (CPU only)
Cache (L1/L2/L3) 64 KB per core / 1 MB per core / 16 MB shared
Process Size 4 nm
Socket Compatibility FP8
Production Status / Release Date Active / January 2023
Part Numbers 100-000000955 (FP7r2), 100-000000964 (FP7), 100-000001129 (FP8)
Maximum Temperature (tJMax) 100°C
Features AVX, AVX2, AVX-512, ECC Memory Support, AMD-V, Precision Boost 2


CWWK AMD 7840HS Mobo Physical Design

The CWWK 7840HS CPU+Motherboard combo represents a significant leap in compact computing, catering to a wide range of users from enthusiasts to professionals requiring high-performance systems in small form factors.

This combination of AMD’s Ryzen 7 7840HS processor and a feature-rich Mini-ITX motherboard offers an intriguing blend of power, efficiency, and expansion capabilities, making it an ideal choice for various applications, including gaming, content creation, and server use.

The motherboard itself is a lovely bit of engineering, designed with a matte black PCB and a high-density, moisture-free fiber 10-layer circuit board, ensuring both aesthetic appeal and durability. This design philosophy extends to the motherboard’s support for AMD’s “Zen 4” architecture Ryzen™ 5/7/9 series processors, providing users with the ability to choose a CPU that best fits their performance needs without compromising on form factor.

One of the standout features of this motherboard is its expansion capabilities, particularly notable given its 17×17 standard Mini-ITX form factor. It includes a PCI-E x16 slot (PCle4.0 x8 signal) for graphics or network card expansions, two M.2 NVMe (PCle4.0 x2) slots for high-speed storage, and SFF-8643 sockets that support up to four SATA 3.0 connections via cable.

This level of expandability is uncommon in Mini-ITX motherboards, offering users the flexibility to build a compact yet powerful system that can handle demanding applications and storage needs.

Memory support is another area where the 7840HS CPU+Motherboard combo shines. With dual-channel SO-DIMM DDR5 slots supporting up to 5600MHz (and backward compatibility for server-grade ECC notebook memory), it allows for high-speed, reliable memory configurations up to 64GB. This capability is crucial for application ons requiring fast data access and processing, such as video editing and 3D rendering.

HOWEVER, there is definitely a debate as to whether you can actually use ECC memory! CWWK lists 4 different CPU SKUs for this mobo and only 1 of them (the 7735HS) actually supports ECC. So, in order to investigate, I installed 1x 16GB Kingston ECC SODIMM 4800Mhz module and ran some SSH commands. Sadly, it appears that the default 7840HS version of this motherboard combo does NOT support ECC (SEE VIDEO ABOVE)

The combo’s connectivity options are equally impressive, featuring four Intel i226-V 2.5G RJ45 UDE network ports, HDMI+DP+Type-C triple display outputs supporting 4K@60Hz, and multiple USB 3.2 and Type-C interfaces. Such comprehensive connectivity ensures that users can connect a wide array of peripherals, displays, and network connections, making the system versatile for different setups and applications.

The CWWK 7840HS CPU+Motherboard combo is a great example of modern computing’s direction towards more efficient, powerful, and versatile systems within increasingly compact form factors. Whether for gaming, professional work, or server applications, this combo offers a compelling option for those seeking the pinnacle of performance and flexibility in a small package.

Its combination of a high-performance processor, expansive memory and storage options, and robust connectivity makes it a standout choice for enthusiasts and professionals alike.

The CWWK 7840HS CPU+Motherboard combo features ASMedia SATA controllers, specifically the ASM1166 and ASM1164 chips, which are central to its enhanced SATA connectivity. These chips enable the motherboard to efficiently manage SATA connections, ensuring stable and rapid data transfer rates for a range of storage devices.

The inclusion of two SFF-8643 connectors, influenced by these ASMedia components, significantly boosts the motherboard’s storage expansion capabilities. These connectors allow for up to eight SATA devices to be connected through breakout cables, optimizing storage scalability within a compact form factor. However, it’s important to highlight that these connectors do not support NVMe drives, focusing instead on maximizing SATA device compatibility.

This motherboard also boasts a single standard SATA port, complementing the SFF-8643 connectors to offer comprehensive support for SATA-based storage configurations. The strategic integration of ASMedia SATA controllers underscores a commitment to providing versatile and reliable storage solutions, tailored for users prioritizing a balance of speed, capacity, and efficiency in their builds.

The AMD Ryzen 7 7840HS is a notable entry in AMD’s mobile processor lineup, launched in January 2023. Part of the Ryzen 7 series and built on the advanced Zen 4 (Phoenix) architecture, this chip is designed to deliver high performance for laptops and portable devices. With 8 cores and 16 threads thanks to AMD’s Simultaneous Multithreading (SMT), the 7840HS offers substantial multitasking capabilities. Operating at a base frequency of 3.8 GHz with the ability to boost up to 5.1 GHz, it combines speed with efficiency, all within a 35W thermal design power (TDP). This processor also supports DDR5 memory and has integrated Radeon 780M graphics, making it well-suited for both productivity tasks and gaming.

Physically, the Ryzen 7 7840HS is manufactured using TSMC’s 4 nm process technology, which houses 25,000 million transistors on a 178 mm² die. This compact yet powerful CPU is designed for AMD’s Socket FP8, underscoring its mobile-oriented design with a configurable TDP range of 35-54W. It supports a wide range of features, including ECC memory for data integrity and PCI-Express Gen 4 for high-speed component communication.  The Ryzen 7 7840HS stands out with its inclusion of the latest Ryzen AI technology, aimed at enhancing generative AI applications, and its leading-edge Radeon 780M integrated graphics. This combination not only boosts traditional computing tasks but also opens up new possibilities in AI and gaming. The processor’s architecture enables significant improvements in instructions per cycle (IPC), benefiting from larger caches and faster memory support up to LPDDR5x-7500. Its performance is competitive with top-tier processors in its category, reflecting AMD’s commitment to delivering powerful computing solutions.

The discussion around ECC (Error-Correcting Code) memory support on the CWWK 7840HS CPU+Motherboard combo reveals a nuanced landscape of compatibility and performance considerations. While the motherboard touts support for “server-grade ECC” memory, indicating an ability to correct data corruption on-the-fly and enhance system reliability, the reality of ECC support is more complex. It requires alignment across the CPU, motherboard, and the memory itself. The AMD Ryzen 7 7840HS processor, integral to this combo, along with other CPUs offered by CWWK, presents a mixed picture regarding ECC compatibility. Despite AMD’s general support for ECC across many of its CPUs, the specific models available with this motherboard, including the 7840HS, do not officially support ECC, highlighting a disconnect between processor capabilities and motherboard features. This discrepancy underscores the importance of thorough compatibility checks for users who prioritize ECC for its error-correcting capabilities, especially in environments where data integrity is paramount.4

The situation is further complicated by the motherboard’s design and the marketing of DDR5 memory with “on-die ECC,” which does not equate to traditional ECC memory’s error-correcting functionality. This type of ECC, often referred to as a marketing gimmick, fails to provide the same level of error correction and data integrity assurance as server-grade ECC memory. As enthusiasts and professionals debate the motherboard’s ECC support, it becomes evident that while the hardware may technically support ECC, the practical benefits and implementation may fall short without the full cooperation of the CPU and explicit support from the motherboard’s firmware. This scenario leaves users in a precarious position, needing to navigate between marketing claims and technical specifications to determine the true extent of ECC support and its relevance to their specific use cases.

Given the technical details and specifications of the CWWK 7840HS CPU+Motherboard combo, we can infer some positive and negative points about this hardware combination despite the inability to access the specific Reddit page for user insights.

===== Further Testing – COMING SOON =====

Check our YouTube channel for further videos on the AMD-7840HS NAS Motherboard for testing first (such as the video below):


CWWK AMD 7840HS NAS Motherboard Review Conclusion – Pros and Cons

Spec Highlights – 4x AMD MobileRyzen Options, SODIMM DDR5 Slots×2, ECC Supported, 2×M.2 2280 4×2 SSD Slots, PCIe 4×8 connector ×1 (x16 Physical), SFF-8643 x2 Connectors for SATA III, 4x 2.5GbE, USB 4 (20Gbs Limits) , Internal USB 2.0   $489 on AliExpress and Check on Amazon

The combination of the AMD “Zen 4” architecture Ryzen™ 5/7/9 series processors with a very unique motherboard offers a high-performance platform that is particularly suitable for building a low scale, but HIGH POWER Network Attached Storage (NAS) server. The Mini-ITX form factor of the motherboard, compatible with 1700 series CPU coolers, ensures that it can fit into compact NAS cases while providing adequate cooling for the powerful processors housed within. In the realm of NAS servers, storage options and connectivity are key. The motherboard’s two M.2 NVMe (PCIe 4.0 x2) slots are ideal for high-speed storage drives that can handle intense read and write operations typical in a NAS environment. The inclusion of 2 * SFF-8643 sockets, which support up to four connections each and a total of 9 SATA 3.0, is an advanced feature that provides flexibility and scalability for storage expansion. This is particularly beneficial for NAS setups where large storage pools and redundancy (such as RAID configurations) are important. Network connectivity is another critical aspect of NAS servers, and this motherboard delivers with its 4 * Intel i226-V 2.5G RJ45 UDE network ports, allowing for high-speed data transfer and network redundancy or link aggregation if required. However, the lack of 10GbE port might limit the network throughput if higher speeds are needed, in which case the PCIe Gen 5×16 slot could be employed for an additional network interface card, although this might be considered an inefficient use of this high-bandwidth expansion slot. Lastly, the wide array of USB ports, including USB3.2 Gen2 Type-C with a 20Gbps rate and additional USB3.2 and USB2.0 ports, adds to the versatility of this motherboard. The built-in set of USB3.2 pin sockets also allow for further expansion and connectivity options, essential for a NAS that may need to accommodate a variety of peripherals or provide additional data transfer interfaces.

PROS
  • High-Performance CPU: The AMD Ryzen 7 7840HS processor, with 8 cores and 16 threads capable of reaching up to 5.1GHz, offers excellent performance for demanding applications and multitasking. This makes the combo suitable for high-end gaming, content creation, and computational tasks.
  • Comprehensive Connectivity and Expansion: The motherboard’s design, featuring a PCI-E x16 slot (physically, in reality it is x8 operational), dual M.2 NVMe slots, multiple SATA3.0 connections, and 2.5G RJ45 network ports, provides a wide range of connectivity options. This allows for extensive storage solutions, high-speed internet connectivity, and the possibility of graphics or network card expansions, making it versatile for various use cases.
  • Advanced Memory Support: With dual-channel SO-DIMM DDR5 slots supporting up to 5600MHz and server-grade ECC notebook memory (still being investigated about it’s compatibility in Mobo vs CPU in the 7840HS), the combo offers cutting-edge memory technology with high-speed and reliable memory options, beneficial for workstations and servers requiring error correction for stability.
  • Efficient Power Consumption: The TDP rating of 35-54W for the CPU indicates efficient power usage, which is crucial for keeping the system cool and reducing energy costs, particularly in environments where the system might be running continuously, such as servers or media centers.
  • Compact and Durable Design: The Mini-ITX form factor is ideal for users looking to build small, space-efficient systems without compromising on performance. Additionally, the high-quality, moisture-free fiber circuit board with full protection enhances the durability and longevity of the motherboard.
CONS
  • Power Supply Requirements: The recommendation to use a power supply of more than 500W with 9 disks may necessitate a higher initial investment for users aiming to fully utilize the motherboard’s storage capabilities, especially in compact builds where space and cooling for large power supplies can be a concern.
  • Complexity for Beginners: The wealth of features and expansion options, while beneficial for experienced users, may overwhelm beginners. The technical nature of managing multiple storage devices, optimizing memory configurations, and ensuring compatibility with various components requires a certain level of expertise.
  • Limited PCI-E Bandwidth: The single PCI-E x16 slot operating at x8 signal might limit the performance of high-end graphics cards or other PCI-E devices. This could be a bottleneck for users aiming to achieve maximum graphical performance or looking to install multiple high-bandwidth PCI-E cards.
  • Cost: Given the high-end specifications and features, the CWWK 7840HS combo is likely to carry a premium price tag. This cost might be prohibitive for budget-conscious builders or those who do not require the advanced features offered by this combo.
  • Cooling Considerations: The compact Mini-ITX form factor, while advantageous for space-saving, may present challenges in terms of cooling, especially when housing high-performance components like the Ryzen 7840HS. Users will need to carefully consider cooling solutions to maintain optimal temperatures and prevent thermal throttling.

 

Here are a few examples of where you can get this board online:

  • (Topton) 8-Bay / 9-Bay Board AMD-7940HS $489 (AliExpress) HERE
  • (Topton) The AMD-7940HS CPU+Board + 1TB NVMe + 32GB DDR5 + SFF Cables + CPU HS $729 (AliExpress) HERE
  • (KingNovy) Complete Board + AMD-7940HS $509 (AliExpress) HERE
  • Learn more about other Recommended M-ITX CPU+Mobo Combos HERE in an article or HERE on YouTube
📧 SUBSCRIBE TO OUR NEWSLETTER 🔔
[contact-form-7]
🔒 Join Inner Circle

Get an alert every time something gets added to this specific article!


Want to follow specific category? 📧 Subscribe

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions
If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
 
Or support us by using our affiliate links on Amazon UK and Amazon US
    
 
Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

 

Jonsbo N4 NAS Enclosure Released

Par : Rob Andrews
5 mars 2024 à 17:00

The Jonsbo N4 6/8-Bay NAS Enclosure has been Revealed

The Jonsbo N4 NAS Enclosure marks an addition to the brand’s lineup, featuring cube-shaped Micro-ATX cases designed specifically for DIY NAS server builds. These enclosures are available in two colours: black and white, each incorporating a distinctive design that includes a classy wood embellishment on the front side of the upper compartment.

UPDATE – The Jonsbo N4 NAS Case is Now Available to Buy on AliExpress HERE

UPDATE 2  – The Jonsbo N4 NAS Case REVIEW is NOW LIVEHERE on YouTube, or HERE as a written article on NASCompares

Model: N4 (Black / White)

Dimensions: 286mm (W) x 300mm (D) x 228mm (H) / Material: 0.7mm Steel + Wood, Weight: 3.75kg

Storage: 6x 3.5″ HDD slots + 2x 2.5″ SSD slots

Motherboard: ITX / Micro-ATX

Ports: 1x Type-C USB, 1x USB 3.0 Type-A

PSU: SFX (up to 125mm in length) / Maximum CPU Cooler Height: ≤70mm

PCI Expansion: x4 , Maximum Graphics Card Length: ≤230mm

Cooling: 1x 120mm fan (built-in)

Check AliExpress HERECheck Amazon HERE

Jonsbo N4 NAS Case Design

The case supports a Micro-ATX motherboard tray, low-profile expansion cards, and offers compatibility for CPU coolers up to 70 mm in height. The inclusion of eight drive caddies, with six designated for 3.5-inch drives and two for 2.5-inch drives, all equipped with SATA 6 Gbps backplanes for hot-plugging, underlines its focus on storage flexibility.

One of the key features of the N4 series is its storage capacity, which includes eight drive bays in total. This comprises six 3.5-inch bays and two 2.5-inch bays, all equipped with SATA 6 Gbps backplanes for hot-plugging capabilities. This configuration allows for a versatile setup of storage drives, meeting the demands for high storage capacity in NAS applications. The design ensures that these drive bays are easily accessible and maintained, promoting a user-friendly experience for installing and upgrading storage devices.

Cooling is managed within the enclosure by a single, built-in 120mm fan located at the rear, aimed at providing sufficient airflow to maintain optimal operating temperatures for the drives and other internal components. The enclosure’s cooling system is further supported by its design, which includes a perforated front panel for the lower compartment housing the drive bays and additional perforations along the sides and top of the upper compartment. This design choice aids in effective cooling, crucial for the reliability and longevity of the NAS server built within.

Jonsbo N4 NAS Case Connections

For connectivity and external interfaces, the N4 NAS Enclosure is equipped with a type-A USB 3.2 port and a USB 3.2 type-C port, conveniently located on the classy wood embellishment at the front side of the upper compartment. This choice of materials and placement not only adds to the aesthetic appeal of the case but also ensures easy access to the ports for quick connections. The inclusion of these modern USB standards caters to the need for high-speed data transfer, a significant aspect for NAS systems that handle large volumes of data.

In terms of compatibility, the N4 series supports MicroATX and Mini-ITX motherboard form factors, with accommodation for up to four low-profile expansion slots. It allows for the installation of graphics cards up to 230 mm in length and CPU coolers up to 70 mm in height, as well as SFX power supplies with a maximum depth of 125 mm. While these specifications may limit some options for high-end components, they are adequate for building a compact and efficient NAS system.

The Jonsbo N4 NAS Enclosure provides a balanced solution for users looking to assemble a NAS server with a focus on storage capacity, cooling efficiency, and a compact footprint.

When Will the Jonsbo N4 NAS Case Be Released and the Price?

Regarding price and availability, the cost of the Jonsbo N4 NAS Enclosure is yet to be confirmed (TBC), but potential buyers can anticipate a price point similar to the previously released Jonsbo N3 model. The initial release is expected to be available through popular online platforms such as Aliexpress and Amazon, which are often the first to stock new products from Jonsbo. This approach allows for wider availability and accessibility to a global audience eagerly awaiting new NAS solutions. The full release and widespread availability of the Jonsbo N4 NAS Enclosure are projected for Spring 2024, aligning with the company’s strategy to introduce innovative products in a timely manner. As anticipation builds, NASCompares plans to conduct a thorough review of the enclosure, offering insights and evaluations to potential users. This forthcoming review will provide valuable information on the N4’s performance, build quality, and overall value, assisting in informed decision-making for those considering this enclosure for their NAS server builds.

(White) Check AliExpress $75.36

Check Amazon HERE

(Black) Check AliExpress $79.99

Check Amazon HERE

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔
[contact-form-7]
🔒 Join Inner Circle


Get an alert every time something gets added to this specific article!


Want to follow specific category? 📧 Subscribe

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions
If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
 
Or support us by using our affiliate links on Amazon UK and Amazon US
    
 
Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

 

The Topton N305 NAS Motherboard – Hardware Deep Dive Review

Par : Rob Andrews
15 mars 2024 à 15:00

The Topton N305 NAS Motherboard+CPU Combo – Should You Buy It?

If you have come to this article on the Topton N305 NAS Motherboard, then chances are you are a very specific kind of NAS user! When you want to build your own NAS from scratch, there is always the balance between POWER and POWER EFFICIENCY! The former, means you can get so much more done, as quickly as possible – the latter is a pursuit to ensure that this 24×7 DiY NAS server is not going to cost you a small fortune in electricity costs! Until recently, the 2020/2021 released Topton N5105/N6005 NAS+Mobo combo was considered the best balance in the market to provide a fair balance of performance, capability and power efficiency. However, because Intel has moved forward with its refresh of their processors into the newer generation (largely killing off the Intel Celeron and Pentium naming) AND brands such as Topton have now vastly improved their development techniques, many MANY eyes have now moved over to the newer Topton Intel N305 and N100 NAS Motherboard. Most ‘Build Your Own’ (BYO) NAS buyers are considering this highly praised little M-ITX combo for their new Plex Build, their new modest Container/VM server with Proxmox, or scaling up from a private cloud to a 5-6 drive UnRAID or TrueNAS server! But, is the N305 NAS motherboard actually any good? What are the main differences to consider between the N305 and N100 model? And is it reliable enough for your data? In this article we dig into the hardware and share what we find!

Note – You can watch the Topton N305 full hardware review and dive HERE on YouTube

Additionally, find our lists of the recommended NAS CPU+Mobo Combos HERE on NASCompares in a dedicated article

Where to Buy

(Amazon / Aliexpress)

ALIEXPRESS $279 HERE (Upgrades Available)

Amazon $348 HERE (Board Only)

Component Specification
Processor Intel Alder Lake-N i3-N305
Memory 1x SO-DIMM DDR5 4800MHz, up to 16/32GB
Storage 2x M.2 NVMe 3×1 Slot, 2x SATA3
PCIe Slot PCIe 3×1 (cut)
Graphics Intel UHD Graphics
Display Outputs 2x HDMI, 1x DP, 1x Type-C (all 4096 x 2160@60Hz)
Network Card 4x Intel i226-V 2.5G
4G LTE/SIM Yes
Wireless? MICROPCIe Slot (Shared with PCIe 3×1 Slot)
USB Ports 5x USB2.0, 1x USB3 via FPanel and Pins
Cooling Passive cooling with fanless heatsink
BIOS AMI EFI BIOS with various supports
TDP 9-15W
Power Input DC 12V (External PSU option)
Case Material Aluminium Alloy
Expansion PWM fan power connector, TPM Pin
Dimensions 158.0mm x 126.5mm x 60.2mm
Color Black or Gray (random)
Installation Desktop, Wall-mounted
Operating Environment 0°C to 70°C, 5%-85% Humidity

 


Topton N305 DiY NAS CPU+MoBo Combo – Hardware Design

The Topton N305 Board is offered on Aliexpress with various pricing options based on the included components. The basic package, which includes just the CPU and motherboard, is priced at $319. For an additional $10, customers can obtain the package with a SAS fan-out cable for enhanced storage capabilities, totalling $329. The most comprehensive option includes everything mentioned plus an external PSU, available for $359. This tiered pricing structure provides flexibility for buyers based on their specific needs and desired configurations.

The latest version of the Topton N305 ITX motherboard now includes a metal, high quality fan-assisted heatsink. This new feature aims to enhance cooling efficiency for the system. It’s a significant update for those looking for improved thermal management in their ITX setups.

The N305 CPU, a central component of Topton’s latest NAS and DiY switch motherboard, showcases Intel’s innovative engineering through its Alder Lake-N architecture, catering specifically to efficiency and performance. With its Intel 7 lithography, the processor strikes a balance between power consumption and computational prowess, offering a TDP of 9-15W. This optimization allows for reduced energy usage while maintaining high performance, making it an ideal choice for NAS systems where efficiency is paramount.

Embedded within the motherboard, the N305 CPU supports advanced memory capabilities, including DDR5, ensuring broad compatibility and future-proofing for evolving storage technologies. The processor’s ability to handle up to 16GB of memory alongside its versatile support for various memory speeds up to 4800 MHz underlines its capacity to manage intensive data transactions and storage operations. This flexibility is crucial for NAS applications, which demand rapid access to and processing of voluminous data sets.

Furthermore, the integration of Intel UHD Graphics within the CPU provides substantial support for multimedia tasks, extending the motherboard’s utility beyond mere storage. This feature, coupled with the processor’s support for multiple displays and high-definition outputs, enables the N305 NAS Motherboard to serve as a central hub for not only storage but also media streaming and light graphical tasks. The inclusion of advanced technologies like Intel Quick Sync Video highlights the CPU’s adeptness at encoding and decoding video streams efficiently, thereby enhancing the functionality of NAS systems built with the N305 motherboard for a variety of applications.

The Topton N305 NAS Motherboard incorporates a single SO-DIMM slot for memory, strategically located on the motherboard’s rear, optimizing space and accessibility. This design choice underscores the board’s compact and efficient layout, catering to users seeking a balance between performance and form factor in their NAS solutions. However, it’s important to note that this system does not support ECC (Error-Correcting Code) memory. The absence of ECC support is typical for systems prioritizing cost-effectiveness and simplicity over the error correction capabilities critical in enterprise-level servers. Despite this, the motherboard’s memory compatibility, supporting up to 32GB of DDR5 RAM at speeds of 4800MHz (and compatibility with 5200/5600MHz), ensures robust performance for various NAS applications.

At the top section of the Mini-ITX NAS motherboard, there are two distinct SATA connection ports available for direct drive connections. Additionally, it features an SFF-8643 output. This output enables the connection of four more SATA drives. The connectivity expansion is facilitated through a compatible cable.

The motherboard utilizes a JMB585 controller for enhanced SATA drive management, bridging the gap between PCIe hosts and SATA/AHCI storage devices. This integration allows the board to support five SATA ports through the JMB585, enhancing its storage capabilities.

The controller also enables Port Multiplier support, significantly expanding potential storage configurations. This setup is particularly beneficial for users looking to maximize their storage options, offering a versatile solution for a variety of storage needs.

Example:

It supports command-based switching (CBS) and FIS (Frame Information Structure)-based switching (FBS). JMB585 also support TRIM to the SSD and can transmit and receive data by both of AHCI mode and legacy IDE mode to and from the host respectively.

Although this review is of the DC output version of the Topton N305 NAS board, there is also two 4-POWER (12V) connectors at the rear corner of the motherboard to supply additional power for bulk storage needs as required in some enclosures and backplanes.

This review focuses on the DC output variant of the Topton N305 NAS motherboard. Additionally, it features two 4-POWER (12V) connectors located at the rear corner. These connectors are designed to supply extra power for extensive storage needs. This capability is especially useful in certain enclosures and backplanes where additional power is necessary for bulk storage management.

The Topton N305 DC motherboard is supplied with an external power supply unit (PSU), specifically a 180W model produced by Chicony, a name that may not be familiar to all. No, me neither…

The fan-assisted CPU cooling system on the Topton N305 NAS motherboard receives commendation for its efficiency, producing minimal noise while maintaining a surprisingly low profile. This design choice enhances the overall user experience by ensuring effective thermal management without adding bulk or disruptive sound to the setup.

The N305 NAS motherboard facilitates M.2 NVMe storage through two 2280 slots. These slots are strategically located on the rear or base of the motherboard for easy access and efficient space utilization. This configuration allows for high-speed storage solutions to be incorporated seamlessly into the system, enhancing its performance capabilities.

The M.2 connectors on the N305 NAS motherboard are specified as PCIe Gen 3×1, providing a maximum bandwidth of 1000MB/s for each slot. While it may be seen as a drawback that 3×4 NVMe drives will operate in these 3×1 slots, limiting their maximum speed, this configuration remains noteworthy. Considering the motherboard’s compact scale and the overall allocation of 9 PCIe lanes, the inclusion of these connectors and their performance capability is still an impressive feat, balancing system expansion with available resources.

Our examination through SSH terminal within UnRAID has verified the configuration of the slots. It’s confirmed that they operate at the downgraded bandwidth of 3×1. This adjustment aligns with the system’s specifications and ensures compatibility within its infrastructure.

During our disk speed tests on the motherboard, a standard PCIe 3×4 NVMe drive was tested using a 1GB file. The results showed a sequential read/write speed of approximately 750-780MB/s. This performance is indicative of the operational bandwidth limits imposed by the 3×1 slot configuration on the motherboard.

In our tests transferring data between two M.2 NVMe drives with a 1GB file, the speeds achieved ranged from 320-330MB/s. This suggests that the two NVMe slots share a single lane or path on the motherboard. The shared pathway is likely the reason for these specific transfer speeds, indicating a bottleneck at the shared connection point.

Located at the front-bottom of the motherboard is a PCIe slot, specifically designed for further system enhancements and expansions. This slot opens up opportunities for additional upgrades, allowing users to customize their setups according to their specific needs. It represents a key feature for those looking to extend the motherboard’s capabilities beyond its initial configuration.

The PCIe slot on the motherboard operates with Gen 3×1 specifications, offering a maximum bandwidth of 1,000MB/s. Despite this limitation, it has been physically designed to accommodate longer cards, such as x4, x8, or x16. This thoughtful design ensures compatibility with a wider range of expansion cards, providing users with greater flexibility in upgrading their systems. It is something of a compromise between bandwidth capability and physical compatibility, enhancing the motherboard’s adaptability for various use cases. The limitations in PCIe speed and lane allocation on the motherboard stem from the CPU’s architecture, which provides 8-9 lanes. This constraint not only affects the N305 model but also has implications for the N100 version of the motherboard and CPU NAS combo. The lane count directly influences the number and types of devices that can be supported concurrently, impacting overall system expandability and performance. This highlights the importance of the CPU’s lane capacity in determining the motherboard’s capability for expansions and upgrades.

Located on the back of the motherboard is a MINIPCIe slot, primarily intended for adding a wireless network card. This slot, while versatile, is not suitable for a wide range of other expansions. Its inclusion provides an option for wireless connectivity, enhancing the board’s functionality without significantly diversifying its expansion capabilities. The MINIPCIe slot located at the rear of the motherboard is shared with the main PCIe 3×1 slot, meaning they cannot be used simultaneously. This configuration limits the ability to expand the system’s connectivity and upgrade capabilities at the same time. Users must choose between utilizing the MINIPCIe slot for wireless networking or the PCIe slot for other expansions, highlighting a trade-off in the motherboard’s design for flexibility versus functionality.

In an interesting move, likely catering to prosumer uses like pfsense and OpenWRT builds, the motherboard includes a 4G LTE/SIM card slot. This addition is somewhat unexpected but expands the board’s utility by enabling direct cellular network access. It suggests a broader vision for the motherboard’s applications, potentially appealing to users requiring remote or backup internet connectivity. Integrating the 4G LTE/SIM card slot for cellular network access into NAS systems like UnRAID may present challenges, as such operating systems might not support this type of cellular network interface. This limitation underscores the importance of verifying compatibility with the intended NAS OS to ensure full functionality of the onboard features. The presence of cellular connectivity options expands the potential use cases for the motherboard, although users must navigate the constraints of OS support.

The motherboard is equipped with four 2.5GbE network ports, each powered by an Intel i226-V controller. This setup significantly enhances the board’s networking capabilities, providing robust, high-speed connections suitable for demanding network environments. The inclusion of multiple 2.5GbE ports allows for flexible network configurations and supports advanced networking features, making it an ideal choice for users looking for high-performance networking options in their NAS setups. The integrated network card on the motherboard enables it to achieve a default network bandwidth of over 1GB per second. This high capacity can be distributed across multiple client devices or utilized fully by a single device through advanced networking techniques such as SMB3, load balancing, LAG, or trunking with a compatible smart switch.

This feature significantly enhances the motherboard’s network performance, catering to both distributed and concentrated network demands. Integrating a 10GbE NIC upgrade into the motherboard’s PCIe 3×1 slot could potentially elevate the network bandwidth to 2GB or 2000MB/s. This enhancement would leverage the available PCIe slot to significantly boost the networking capabilities of the system. Such an upgrade indicates a strong potential for achieving superior network performance, making the system well-suited for high-demand networking tasks. The performance ceiling for the two NVMe drives on the motherboard, even when configured in RAID 0/1, is around 1000MB/s. Meanwhile, connecting 5-6 SATA drives, depending on whether they are HDDs or SATA SSDs, can result in varying performance. With HDDs, expect around 600-800MB/s, and with SATA SSDs, performance can reach up to 1000-1100MB/s. This variation is due to the JMB585 SATA controller operating on a Gen 3 lane, influencing the overall throughput of connected storage devices.

The motherboard is designed with an abundance of USB ports, catering to various connectivity needs. Among these, two ports are uniquely positioned internally, providing a convenient option for connecting an OS boot drive directly on the motherboard. This feature enhances the flexibility and functionality of the system, allowing for streamlined setup and efficient use of space.

The motherboard features six USB 2.0 ports in total, with four positioned on the rear and two internally on the board, designed for versatile connectivity options, including the possibility of an OS boot drive connection. Additionally, it supports USB 3.2 connectivity through front panel and internal pins, expanding its compatibility with faster USB devices.

The motherboard is equipped with HDMI 2.0 and DisplayPort 1.4 outputs, supporting 4K resolution at 60FPS. This capability ensures high-quality video output for tasks requiring detailed visuals. Such features make the board suitable for applications beyond traditional computing tasks, including media playback and content creation that demands high-resolution displays.

We conducted a video analysis of the Topton N305 NAS Motherboard+CPU combo, exploring its BIOS features and conducting various tests using UnRAID. This in-depth examination aimed to understand the motherboard’s capabilities, performance, and how it handles in different scenarios, particularly focusing on its compatibility and performance with UnRAID as a potential NAS solution. This process provided valuable insights into its suitability for various computing tasks and its overall performance metrics.

The Topton N305 NAS Motherboard+CPU Combo – Should You Buy It?

As of 2024, the Topton N305 NAS motherboard stands out for its balance between power efficiency and functionality, especially at its price range. Its CPU, with a flexible TDP ranging from 9 to 15 watts, impressively manages to offer an 8-core, 8-thread configuration capable of reaching up to 3.8 GHz per core. This makes it an excellent choice for tasks like 4K transcoding on a Plex Media Server, with the potential to handle 8K content thanks to its integrated graphics hitting 1.25 GHz. Despite the limitation of having only 9 PCIe Gen 3 lanes, the design efficiently allocates these resources, supporting up to six SATA drives, two M.2 slots, and a PCIe expansion slot, all on a compact MITX board. While the N100 version presents a more cost-effective and slightly less powerful alternative, the modest increase in power consumption of the N305 variant justifies its higher performance capability, making it a superior choice for those needing a more potent setup. The N305’s design, which mirrors the physical and lane layout of the N100 while significantly enhancing performance, demonstrates an impressive achievement in maximizing the utility and efficiency of a small form factor motherboard.

Where to Buy

(Amazon / Aliexpress)

ALIEXPRESS $279 HERE (Upgrades Available)

Amazon $348 HERE (Board Only)

Component Specification
Processor Intel Alder Lake-N i3-N305
Memory 1x SO-DIMM DDR5 4800MHz, up to 16/32GB
Storage 2x M.2 NVMe 3×1 Slot, 2x SATA3
PCIe Slot PCIe 3×1 (cut)
Graphics Intel UHD Graphics
Display Outputs 2x HDMI, 1x DP, 1x Type-C (all 4096 x 2160@60Hz)
Network Card 4x Intel i226-V 2.5G
4G LTE/SIM Yes
Wireless? MICROPCIe Slot (Shared with PCIe 3×1 Slot)
USB Ports 5x USB2.0, 1x USB3 via FPanel and Pins
Cooling Passive cooling with fanless heatsink
BIOS AMI EFI BIOS with various supports
TDP 9-15W
Power Input DC 12V (External PSU option)
Case Material Aluminium Alloy
Expansion PWM fan power connector, TPM Pin
Dimensions 158.0mm x 126.5mm x 60.2mm
Color Black or Gray (random)
Installation Desktop, Wall-mounted
Operating Environment 0°C to 70°C, 5%-85% Humidity

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔
[contact-form-7]
🔒 Join Inner Circle

Get an alert every time something gets added to this specific article!


Want to follow specific category? 📧 Subscribe

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions
If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
 
Or support us by using our affiliate links on Amazon UK and Amazon US
    
 
Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

 
❌
❌