Synology Reveal a New CC400W Compact IP Camera for Surveillance Station

Synology has revealed a new, more compact entry, into its range of surveillance cameras, the CC400W. This less industrial alternative to the bulkier metallic PoE BC500 bullet and TC500 turret-style cameras that were launched earlier in 2023 is seemingly designed for more internal building and day to day use, though seemingly still IP67 weatherproof – so it’s not limiting itself much in terms of deployment. Sporting a similar 4MP and 30FPS recording maximum to the other two cameras, this camera has a slightly larger 125 degrees of view (vs 110 degrees of the other two high/ceiling placement cams) and is more desktop stylized. Additionally, it will definitely be a camera that does not require a license for use in surveillance station (i.e removing the need to use one of your inclusive 2x Synology licenses that 99% of all Synology NAS arrive with and/or just meaning you can expand your surveillance setup without costly $35-50 surveillance station camera licenses). Let’s discuss everything we know so far.

Hardware and Software Highlights of the Synology CC400W AI IP Camera

The Synology CC400W IP camera features a 4MP resolution at 30 FPS recording and a 125° HFoV wide-angle lens, providing clear recording images. It includes integrated 2-way audio with a microphone and speaker. The camera is IP67 certified, making it resistant to dust and water, and it also meets the US NDAA/TAA Act standards for recording data security and confidentiality.

• Key Specifications:
• 4 MP resolution with 30 FPS recording.
• 125-degree Horizontal Field of View (HFoV) wide-angle lens.
• Integrated 2-way audio with a microphone and speaker.
• Includes 1 microSD card slot.
• IP67 certification and compliance with US NDAA/TAA Encryption/Security.
• Does not require a License in Synology Surveillance Station
• Capability to detect people and vehicles.
• Intrusion detection.
• Instant search feature for quick incident investigation.
• References to use/suitability for Suitable for meetings and conferences.
• Possible integration with Synology Chat and references to ‘Synology Meeting’ – TBC

In terms of AI integration, the CC400W camera offers several functionalities. It can detect people and vehicles in its monitoring area, assisting in the identification of potential security threats. The camera’s intrusion detection feature alerts users to unauthorized access in the monitored area. Additionally, the instant search function allows users to locate specific video segments by time, subject, or event, facilitating efficient investigation of incidents. This would be the third camera that Synolgoy has rolled out, following the BC500 and TC500 PoE cameras that were launched in the first quarter of 2023. This camera, though still clearly having possible business applications, is a much more modest scaled system and although is IP67 weatherproof rated (TBC -conflicting reports)

Credit to Nhipsongkinhte.toquoc.vn – http://nhipsongkinhte.toquoc.vn/synology-va-chien-luoc-phat-trien-tai-viet-nam-20231129081801644.htm – HERE[/caption]

Synology Surveillance Station Software and Synology Cameras – Any Good?

The Synology CC400W camera is designed to work seamlessly with Synology Surveillance Station, version 9.1, offering advanced features compared to non-edge-AI-recognition and third-party cameras.

Used with Surveillance Station, the CC400W camera allows multiple camera feeds to be viewed simultaneously and offers side-by-side viewing of live and recorded footage.

Surveillance Station also supports privacy masks, watermarks, and integration with mapping services like Google Maps.

Beyond camera support, Surveillance Station controls IP speakers and other peripherals, accessible via mobile app or as an additional camera feed with Synology Live Cam. It offers alerts, push notifications, and analytical reports.

Additional add-ons include YouTube Live Streaming, video integrity tools, and IFTTT/Webhook services.

Key features include motion detection, missing object detection, and area tagging. Access is available through web, desktop, and mobile clients.

Smart Lapse creation condenses lengthy recordings, and cloud recording is available with Synology C2 Surveillance.

Home Mode automates camera schedules based on user presence.

The CC400W camera supports AI detection techniques like people, vehicle, and intrusion detection, and Smart Search for specific incidents.

Vehicle detection alerts for unexpected entries during off hours.

Advanced intrusion detection marks specific areas off-limits.

Crowd and loitering detection trigger alerts based on predefined criteria.

Smart Search focuses on specific areas within recorded feeds.

The CC400W camera, while advanced, does not support database storage for specific people or faces. For more advanced functionality, systems like Synology DVA1622 2-Bay or DVA3221 4 Bay are required.

Recordings are securely encrypted, and the camera is NDAA and TAA compliant. Despite limitations, the CC400W Camera’s unique features make it a valuable choice.

Which AI Services Are Included with the Synology CC400W, BC500 and TC500 Cameras (and which ones are not)?

Now, despite the Synology newer CC400W and older BC500 and TC500 Surveillance Cameras arriving with onboard hardware for AI-powered recognition tasks, it is worth highlighting that using them is NOT the same as using the Deep Video Analysis (DVA) series of NAS servers in Synology’s portfolio. These operations are managed from inside the camera and the alerts are handled and actioned by the NAS after the camera sends the appropriate alert – and these cameras so NOT have the same level of hardware as the DVA1622 and DVA3221 inside each of them! Additionally, whereas the DVA series manages multiple tasks internally from multiple cameras, only using the camera hardware as a life ‘feed’, these cameras cannot run deeper AI tasks that involve counting, internal database management and keeping records of AI referral data internally – they do not have the storage or processing power for that. So more complex people counting and specific facial recognition will not be immediately available to your PLUS series Diskstation, just because you are using the CC400W/BC500/TC500. Here is a breakdown of the services available to users with either Synology Cameras or a Synology DVA NAS:

AI Service	Case Use	CC400W / BC500 / TC500	DVA1622 & DVA3221
People / Vehicle/Loitering Detection	Reduce false alarm and protect against loitering	YES	YES
Crowd Detection	Monitor public safety or quality of service	YES	YES
Intrusion Detection	Protect perimeter and restricted area	YES	YES
Instant Search	Investigate incidents quickly after they happen	YES	NO
People/Vehicle Counting	Calculate occupancy in shops, food courts, or parking lots with aggregated counting of people and vehicles entering and leaving	NO	YES
Face Recognition	Automate personnel identification and prevent unauthorized access	NO	YES
License Plate Recognition	Identify license plates and set up triggers based on configurable allow or block lists	NO	YES

If you are unaware of the Synology Deep Video Analysis NAS system, you can find out more about it in the video reviews of the hardware and software below from our YouTube channel:

When will the Synology CC400W Camera Be Released and the Price?

Synology did not give a particularly large amount of information on the commercial release of the WCC400W Camera at the time of writing, but the few indications online all seem to indicate ‘H1 2024’, so that means within the first three months of 2024. Not a particularly concise release window, but still – not hugely far away in the overall scheme of things. Expect pricing to be confirmed alongside bundle deals at launch.

What do you think of the Synology CC400W? Let us know below in the comments below. We pool the comments on this article and the videos that are featured in it to keep all the relevant comments in one place, so take a look and see if your POV is the same as everyone else’s.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

Synology RS422+ NAS Drive – Should You Buy It?

Should the RS422+ NAS from Synology be your next big tech purchase? With such a wide range of private server solutions on the market, it’s never been a better time to be a NAS buyer, looking to move your data away from a public cloud provider, or even to run them side-by-side as a 2-tier backup solution for your home or business needs! Synology has a tremendously diverse range of NAS solutions, but with the previous generation(s) of solutions in their portfolio now appearing on offer, as well as available at discount at 2nd hand eTailers – does the RS422+ deserve your data? We already made a massive review on the Synology RS422+ NAS HERE, but today I want to hit the Pros and Cons head-on and help you decide much quicker on whether this NAS is for you.

HARDWARE HIGHLIGHTS CPU: AMD Embedded Ryzen R1600 2-Core 2.6-3.1Ghz Memory: 2GB DDR4 ECC SODIMM (FIXED) SATA Bays: x4 SATA 3.5/2.5″ Bays M.2 NVMe Bays: No Network Ports: 2x 1GbE PCIe Upgrade: Yes, Only for 10GbE Upgrade (E10G22-T1-mini) Software Platform: DSM Warranty: 3yr Warranty

5 Reasons the Synology RS422+ is a Good NAS for You

So, first up, let’s discuss the high points! Here are the five reasons why the Synology RS422+ NAS drive deserves your money and your data!

Note – if you are in a hurry, you can watch my ‘Synology RS422+ – Before You Buy’ video below HERE

#1 – The RS422+ is Compact, Low Noise and has Low Power Use

The RS422+ is designed with a compact form factor, making it easy to fit in various environments, from small offices to crowded server rooms. The device’s low noise level ensures a quiet working atmosphere, making it suitable for noise-sensitive environments where maintaining a professional atmosphere is essential. Its low power consumption is not only beneficial for reducing energy costs, but it also helps minimize the environmental impact, contributing to a greener and more sustainable workspace.

#2 – Runs EVERYTHING in Synology DSM 7

Runs EVERYTHING in Synology DSM 7: The RS422+ is fully compatible with the latest Synology DSM 7 operating system, providing access to a wealth of applications, services, and features that simplify data management and enhance productivity. DSM 7 offers improved security, better performance, and a more intuitive user interface, ensuring an optimal user experience. With the extensive application ecosystem available through DSM 7, you can run a wide range of services, from backup solutions to multimedia streaming, all from a single device.

#3 – Fast/Easy Upgrade to 10GbE

The RS422+ supports easy upgrades to 10GbE network connectivity, enabling fast data transfer speeds and improved performance for bandwidth-intensive applications. This high-speed connectivity is crucial for businesses and professionals dealing with large volumes of data, such as video editors or data analysts. The ability to upgrade to 10GbE ensures that your NAS remains future-proof and adaptable to the evolving needs of your organization.

#4 – Includes ECC Memory

The inclusion of Error Correction Code (ECC) memory in the RS422+ helps prevent data corruption and ensures the integrity and reliability of your data. ECC memory automatically detects and corrects single-bit memory errors, reducing the risk of system crashes and data loss. This added layer of protection is particularly valuable in environments where data integrity is crucial, such as financial institutions or scientific research facilities.

#5 – Storage Advantages in SHR, BTRFS and Fast Repair

The RS422+ supports Synology Hybrid RAID (SHR), Btrfs file system, and fast repair features, offering flexibility in storage management, data protection, and quick recovery in case of drive failures. SHR automatically optimizes storage capacity and data protection levels based on the number and size of installed drives. The Btrfs file system enables advanced features such as snapshot replication, data deduplication, and file-level data integrity checks. Fast repair minimizes downtime and accelerates the recovery process when a failed drive is replaced.

---

5 Reasons the Synology RS422+ Might NOT Be the NAS for You

While the Synology RS422+ NAS has numerous advantages, there are also some potential drawbacks that may dissuade certain users from investing in it. Here are the top reasons why you might want to consider alternatives to the Synology RS422+ NAS:

#1 – Default Memory is 2GB and Fixed

The RS422+ comes with a fixed 2GB memory, which may not be sufficient for some advanced applications or heavy multitasking. Upgrading the memory is not possible due to its fixed nature, limiting the potential for performance improvement as your needs evolve over time. This limitation can be particularly challenging for organizations with growing data processing requirements or those running memory-intensive applications.

#2 – 1GbE Default Network Connectivity

While the RS422+ can be upgraded to 10GbE, the default network connectivity is 1GbE, which may limit performance for users with high bandwidth requirements. This default connectivity may not be suitable for environments with multiple users accessing the NAS simultaneously or those transferring large volumes of data frequently.

#3 – Lack of Storage Expandability

The RS422+ has limited storage expandability, which could be a concern for users with growing storage needs. This limitation may necessitate the purchase of additional NAS devices or other storage solutions to accommodate increasing data volumes, potentially adding to the overall cost and complexity of the storage infrastructure.

#4 – Lack of M.2 NVMe SSD Slots

The RS422+ does not have M.2 NVMe SSD slots for cache or storage, which could limit its performance compared to other NAS devices that offer this feature. M.2 NVMe SSDs provide significantly faster data access and transfer speeds, enhancing overall performance and responsiveness, particularly for I/O-intensive tasks such as virtualization or large-scale file transfers. The absence of M.2 NVMe SSD support in the RS422+ may make it less attractive for users who require the highest possible performance from their NAS solution

#5 – The RS422+ is More Expensive than it should be!

Despite its numerous advantages and features, the RS422+ is priced higher than some of its competitors at £730 vs similar/better hardware in the desktop DS923+ at £550+, which may deter budget-conscious buyers. The higher cost may be difficult to justify, regardless of it being a rackmount and ‘business tax’, particularly for users who do not require all the advanced features offered by the RS422+ or for those who are not looking to scale up their storage needs significantly beyond older gens (many of which also still support traditional PCIe PCIe Cards). In such cases, more cost-effective NAS alternatives may provide better value for money, while still meeting the users’ storage and performance requirements. In conclusion, while the Synology RS422+ NAS has numerous strengths that make it a strong contender in the market, its lack of M.2 NVMe SSD slots vs the likes of the DS923+ and DS1522+, plus higher price point may be deal-breakers for some users. It is essential to consider your specific storage, performance, and budgetary requirements before making a decision, and to explore alternative NAS solutions that may provide a better balance of features and cost.

What We Said About the Synology RS422+ NAS in our FULL Review

Massive Synology RS422+ Review Article – HERE

YouTube Synology RS422+ Review – HERE

What Synology has produced in the RS422+ Rackstation NAS is an intriguing middle ground between their more cost-effective ARM-based rackmount solutions and their more expensive scalable and upgradable servers. On the face of it, you are getting a tremendously compact but capable 1U 4-Bay rackmount server that, as soon as you factor in the included DSM software and services, is very good value for businesses that want to move their data out of 3rd party cloud and into something they have full control over. Additionally, that CPU (though a fraction divisive when compared previously vs Intel chips in the desktop DS1522+) makes more sense here in this more affordable Rackstation solution. The lack of NVMe M.2 SSD slots, fixed 2GB memory and lack off rails I am less keen on here (and I am still a little on the fence about the way they have pursued 10GbE upgrades in this system) but you are still getting a very well built and small scale NAS solution here and Synology have found a good price point here for this complete solution. Additionally, the fact that Synology has not been so restrictive on HDD use in this system than in more enterprise solutions in 2022 is welcoming too, though they are still taking an odd stance on some drives nonetheless. Ultimately, I can recommend the Synology RS422+ Rackstation NAS to smaller business users, though looking for a compact and very easy-to-deploy NAS solution for surveillance, central business storage, additional backup layers and for DSM as a whole. Though multimedia users might want to give it a miss.

DEAL WATCH – Is It On Offer Right Now? Synology 4-Bay Rackmount NAS RackStation RS422+ (Diskless),Black Amazon UK 52.62 OFF (WAS 1714) [LINK] Synology 4 Bay NAS 1.4Ghz Quadcore CPU - RS422+ Rack Station, Black Amazon USA 36.93 OFF (WAS 896) [LINK] These Offers are Checked Daily

Synology BeeStation – Should You Buy? (Short Review)

Of all the products I’ve spoken about from Synology in nearly 25 years of solutions, the new BeeStation is possibly one of the most conventional yet surprising they have ever released. We first spoke about the BeeStation, otherwise known as the BST150-4T, halfway through 2023, when we started hearing rumors about Synology’s new entry-level solution that was shaping up to challenge the likes of WD My Cloud and My Book solutions. Synology has been providing impressively capable personal cloud solutions for a considerably long time, but it would be fair to say that for the majority of users who just want a simple cloud solution that is easy even for a child to set up, DSM isn’t quite as straightforward as they would like. The BeeStation and BSM hope to remedy this with Synology providing what is potentially the most user-friendly and easy-to-use personal cloud solution they have ever provided, as well as inviting positive comparisons against the likes of Google Drive and iCloud in terms of price. Roll in the fact that the system already arrives pre-populated with four terabytes of storage and is priced at just $199, and what you find here is one of the biggest brands in the world in network attached storage trying to reinvent the wheel that they themselves had a big part in designing! If you are reading this, it is because you are wondering whether the Synology BeeStation is the perfect fit for your simple, low-scale, and low-cost private cloud. So today, I want to tell you the five reasons why I can highly recommend the Synology BeeStation, as well as providing five reasons why you might want to give it a miss.

UPDATE – You can watch the FULL YouTube Review of the Synology BeeStation HERE

Or Read the FULL Massive Beestation Review HERE

Please note – This review is being conducted on a BeeStation 4TB NAS system with pre-launch software, so there is every opportunity that a number of the criticisms below may be addressed at launch on March 6th 2024. It is recommended that you read our full and extensive deep-dive review on the Beestation when it is live.

Synology BeeStation Personal Cloud Review – Quick Conclusion

Synology has clearly done their homework on the development and presentation of the BeeStation private cloud. They are targeting a whole new audience with this system, and therefore, criticisms based on experiences with their other hardware are likely to fall on deaf ears. The BeeStation is probably one of the best middle grounds I have ever seen between an easy-to-use and exceptionally easy-to-set-up private cloud system, while still managing to provide smooth and seamless features for accessing and sharing your private cloud’s storage securely. Looking at this system with a more network-savvy microscope kind of defeats the point, and I’ve tried to be fair in my assessment. The lack of LAN access by default seems a little odd, and launching the BeeStation series in this single-bay, 4TB-only fashion may be a bit of a marketing misstep, but overall, what you’re seeing here is an effectively priced and scaled private cloud system. It’s a fantastic alternative to third-party clouds and existing simplified NAS systems. With many users keeping an eye on their budgets and tightening costs, Synology, known for its premium position in the market, had a challenge scaling down to this kind of user. However, I have to applaud Synology’s R&D for creating a simple and easy-to-use personal cloud solution that still carries a lot of their charm and great software reputation. It may not be as feature-rich as DSM, but BSM does exactly what it says it will do, and I think the target audience it’s designed for will enjoy the BeeStation a great deal!

DEAL WATCH – Is It On Offer Right Now? These Offers are Checked Daily

Reasons You Should Buy the Synology BeeStation

Synology has done an incredible job here of changing a number of core tenets about their existing large NAS series to produce the far more streamlined BeeStation system. Here are five reasons why it certainly gets my recommendation. Before we go further though, what about those hardware specifications? What keeps this system going?

Specification	Details
CPU	Realtek RTD1619B
RAM	1GB DDR4
Storage Capacity	4TB built-in HDD
Networking	Gigabit Ethernet; No Wi-Fi capability
Ports	1 x USB-A 3.2 Gen 1, 1 x USB-C 3.2 Gen 1
Operating System	BeeStation Manager (BSM)
Cloud Integration	Supports Google Drive, OneDrive
Remote Access	Via mobile apps and web interface
Number of Simultaneous Users	Up to 8 people
Supported Operating Systems	Windows, macOS, iOS, Android
Apps and Tools	BeePhotos for mobile, other integrated tools for photo and file management
Physical Dimensions	148 x 63 x 196mm; Weight: 820g
Security Features	Encrypted data transmission; SSH not enabled by default
Local Access	Available post initial setup
Additional Features	Built-in AI for photo recognition, Facial and Object recognition speed boosts

So, with that out the way, why should you consider the Beestation as your ideal private cloud solution?

The EASIEST Synology NAS You Will Ever Own

I really cannot stress enough how straightforward and easy it was to set up the Synology BeeStation, especially when compared to any other Synology NAS that I’ve utilized here on the channel or on the blog. Just to put it into perspective, here’s how setting up a normal Synology DiskStation NAS and setting up the Synology BeeStation compare. Setting up an ordinary Synology NAS takes around 15 to 20 minutes minimum, if you know what you are doing. You need to first install the appropriate storage media of hard drives and/or SSDs into the individual slots. Then, connect the device to your local area network and the power supply and boot up. You need to wait 2 minutes for the system to fully initialize, whereupon you begin the initialization process and download the latest operating system manually via the on-screen prompts in your web browser on a device connected to the local area network. Then, provide your login credentials and go into the storage manager to begin setting up your storage area, including your storage pools, volumes, and shared folders to distribute your data effectively. If you want to take advantage of services such as cloud synchronization, manage your backups, and create an online access account with Synology services, these will add something like 20 to 30 minutes to setup (even longer if you are factoring in more complicated RAID pools such as RAID 5 or 6).

Here is a 40+ minute video showing how to Setup a Synology DSM NAS (so NOT the BeeStation), to give you some idea of how long it takes Synology Diskstation systems:

Now, what about setting up the BeeStation? Well, you take the device out of its box, plug it into the internet, use absolutely any device, mobile or desktop, with an internet connection, and visit the Synology online portal. Then, enter the system serial number for the assistant to be found remotely to set up an account, and the device is genuinely ready to go in around 90 seconds.

Here is a 1-minute gif showing the Beestation setup in Realtime:

The system storage, sync, and backup applications, and creating the Synology account needed for remote access to the system are either all included in that first initialization or will add upwards of 30 more seconds to the installation. We are talking about one of the most foolproof cloud systems I have ever seen, with the added benefit that you can set the device up from cold boot in anything from 2 to 3 minutes. The logic for this extends to the general use of the system, with the BeeStation Manager software being extraordinarily straightforward and easy to use. We will get on to later the extent to which this software can be utilized, but if what you are looking for is easy-to-use, straightforward, and uncomplicated cloud management, the BeeStation definitely has your back!

Surprisingly Reasonable Pricing…Especially for the Included 4TB Storage

The $199 price point that the BeeStation arrives at, especially once you factor in exactly what you are getting for your money long-term, is extraordinarily impressive. Keep in mind, you’re not just getting the system on its own, but a ready-to-go remote access NAS cloud that also arrives with four terabytes of internal storage right out of the gate. To put this into perspective, if you were to utilize popular cloud services such as Google Drive, Dropbox, iCloud, and OneDrive, you would pay around $80 to $100 a year for two terabytes of storage on average. So, if you double this to cover the same 4TB of storage included with the Synology BeeStation, you find that the BeeStation costs within one year exactly as much as popular cloud storage providers, and, in the case of iCloud, actually costs less than the Apple cloud alternative in just one year.

Note – Prices for the 3rd party cloud services below may include other cloud services, but are also often limited to cost-per-user

But it does not stop there. Remember, with those cloud services, after one year, if you do not keep paying, you lose that storage area and will either have to accept its inevitable deletion or spend money on a storage device to pull that data off the cloud. The BeeStation, on the other hand, for that $199 is yours to keep long-term and, alongside arriving with 3 years of manufacturer’s hardware warranty, also comes with an effective lifetime support warranty covering updates, security, and feature improvements. Add to that the myriad of client applications and potential synchronization with larger Synology DiskStation devices down the line, and what you have here is extraordinary value for money when compared with third-party cloud alternatives, but also generally for the cost of a 4TB NAS device in general.

Sync with 3rd Party Cloud, NOT Just Synology C2

This is a very minor point for those out of the loop, but if you have been following Synology in recent years and the development of their NAS solution platform, you’ll know that they’ve been shifting focus towards first-party services and tools across their hardware lineup. You can understand the logic in them prioritizing their own hardware upgrades, storage, media, and even their own Synology software services when developing their own NAS hardware. While Synology’s platform does support a number of third-party hardware and software providers, it’s fair to say that in recent years they have definitely shifted focus towards prioritizing their own options first (for reasons of compatibility, synergy, and profitability almost certainly).

However, huge credit to them for how they have handled cloud synchronization on the BeeStation. For those unaware, cloud synchronization is when your physical NAS solution (commonly referred to as your bare metal) is synchronized with an internet-accessible cloud platform, either for use as a secondary access point for lower priority users or as a secondary backup location between your physical bare metal NAS and an off-site location. Synology has had their own cloud platform, Synology C2, for a number of years now, and it’s been growing in popularity and scale year on year. It would have been easy to limit cloud synchronization on the BeeStation to only their cloud platform, and given the price and target audience, many would not have been surprised. HOWEVER, the Synology BeeStation supports a number of third-party cloud platforms such as Google and OneDrive for cloud synchronization natively, without requiring any additional app or add-on. Full credit to Synology for still supporting synchronization with other cloud platforms when they already have their own in play. Of course, you can use Synology C2 if you wish, and there’s also an argument that Synology provided this to make it easier for users to migrate from those third-party cloud platforms to their own. Nevertheless, I really do have to give them credit for maintaining third-party cloud sync on this device.

REALLY Quiet Operation and Small Impact

Another thing that is going to be music to the ears of people who are simply looking for an alternative to third-party cloud providers in the form of a physical solution in their office or home with remote access, is that the BeeStation is phenomenally low impact in practically every way. The internal hardware configuration of the Realtek RTD1619B and 1GB DDR4 memory is a great middle ground between efficiency and system capability. Synology has been experimenting with this configuration of a 64-bit ARM processor and gigabyte memory for a number of years, with other solutions already arriving for more than a year with this hardware configuration.

This ensures that they’ve had ample time to make the most of what this config can do. Add to that, this system is tremendously small, small enough to fit in a big coat pocket or a laptop bag while barely being noticed, and well under a kilo in weight, making it surprisingly portable if need be. Finally, the system is almost completely noiseless and, thanks to the more modest 4TB hard drive inside (a Synology branded Plus Series value drive), the system is incredibly low noise when in operation. The casing that the BeeStation arrives with is a completely unique design compared to the rest of their hardware solutions and is easily one of the smallest they have ever produced. Ultimately, the point I’m making is that the BeeStation is going to be almost unnoticeable when deployed, even at close proximity.

The BeeStation Fills the Gap Left by WD and Seagate in ‘Easy NAS’ Systems

Let’s be honest, although Synology has certainly retooled their existing NAS solutions to provide a far more streamlined private cloud solution here, they were not the first to design a product like this. When Synology first made it big all those years ago, they didn’t do it because they were the first in the market to provide this kind of solution; they became popular because, unlike alternatives from the likes of Seagate and WD at the time, Synology was providing a personal cloud solution that was also exceptionally capable and feature-rich compared to the more rudimentary options in the market that were effectively hard drives connected to the internet. Fast forward to now, and although Synology has continued to innovate, improve, and expand upon what is included in Synology DSM and their other bigger NAS systems, there are quite a lot of users who desire a more simplified private cloud solution as they don’t want to waste time or energy learning how to utilize their equipment – they just want it to do what it says it will do, and do it well! Over the years, brands like WD with their My Cloud and My Book systems have persisted. However, the personal cloud and small scale simplified NAS market has changed rapidly in recent years, and Western Digital has lost a lot of its market share for numerous reasons. The simpler-to-use WDOS that their My Cloud systems arrive with has struggled to find a balance between simplicity and rich features, leading to inconsistencies that have either annoyed the more technically aware or befuddled the more amateur. This on its own would probably not be so bad, but things got really bad for Western Digital.

Over the course of the last 4 to 5 years, WD has been beset by numerous failings across the different NAS solutions they have provided. One of the earliest and loudest was their use of SMR drives in their WD Red series, which led many to question whether WD had the right idea about what a NAS solution was supposed to do and offer. Then, a couple of years later, WD NAS solutions were hit by a remote hack targeted at deleting users’ data, caused by infrequent firmware updates that users were not actioning, and also because WD was not adequately updating users. However, the worst example was when WD in 2023 was hit by an enormous cybersecurity incident which led to WD My Cloud systems being completely taken offline with remote access inaccessible. Because of the rudimentary design of these systems, users were ill-equipped and poorly informed about what was going on, and this hurt the reputation of the WD My Cloud and My Book systems extensively. The point I am making here is that there has been a gap in the market for a while that needs to be filled for those looking for simple yet reliable private cloud solutions, and Synology already has a big reputation in the world of premium NAS. So, this is a perfect time for them to produce a streamlined alternative to their own solution portfolio that fills the void left by the likes of WD in recent years, and the BeeStation is ideally suited in terms of price, hardware, and software to do this.

However, nothing is perfect and if you think the BeeStation is the same as any other Synology NAS solution, you may be in for disappointment. Let’s go through all the reasons why you might want to give the Synology BeeStation a miss.

Reasons You Should NOT Buy the Synology BeeStation

The majority of reasons why the Synology BeeStation may not suit your needs largely fall under the umbrella of ‘simplicity’. Synology has clearly targeted a very new and more entry-level audience with this product. So, if you are an existing owner of a Synology DSM NAS system or someone who is a bit more tech-savvy, these reasons why you might not want to buy the BeeStation will resonate with you.

It’s very, VERY Basic Compared with Other Synology NAS with DSM

Huge credit to Synology for retooling and reinventing the presentation of their existing NAS platform to create the more streamlined BeeStation system, but we have to acknowledge that the BeeStation and BSM are incredibly basic compared to DiskStation Manager. Earlier, I touched on how simple it is to set up the first time, and while that is true, the more simplified user experience also means that options for configuration, customization, and general upgradability are significantly limited. The BSM user interface consists of only around five different windows, each dedicated to the more rudimentary features of this system. If what you care about is general storage, there is a lot to enjoy here, and the baseline applications from Synology DSM for file management, backup management, and folder management are all present.

However, the BeeStation and BSM platform are more storage-only systems that provide a small toolkit for maximizing that storage for backups and general access. Additionally, likely in order not to confuse or overwhelm the user with configuration, the actual options for sharing this system are also more limited than a normal DSM NAS. The number of maximum supported users is much lower, features such as read/write permissions are absent, sophisticated native storage file system choices such as iSCSI are absent, and even the options for connecting this to another NAS system at launch are quite limited. Again, if you are just looking for your own private cloud with no bells and whistles and easy day-to-day use, this device is perfect. But it is not an alternative to Synology DSM in terms of overall scope.

Not Available Unpopulated or in Other Capacities (at Launch)

One can appreciate that Synology almost certainly has a larger launch campaign for the Synology BeeStation up its sleeve, but it was perhaps a little short-sighted to only launch a single device in a single capacity. In its 25 years of business, Synology has produced numerous scales of systems in terms of system power and storage capacity, so it is a little unfair to criticize them for not going at it with the same level of thrust when launching a whole new arm of their business. However, there is valid criticism to highlight that the system is only available in a four-terabyte capacity (likely with larger capacities to be fair), but also that there is no 0TB/Empty option. Synology solutions have always arrived unpopulated, allowing flexibility in choosing storage. No doubt, in the interest of simplicity, Synology has rolled this solution out with their own branded drives as compulsory. If you dig into the Synology download area for manual system updates, you also find that the firmware updates for the BeeStation are much larger than those found in traditional DSM despite those systems not having storage media by default. This is because BSM arrives with applications for backup and storage management pre-installed and pre-allocated to the 4TB Synology hard drive configuration, meaning the firmware is locked to the 4TB model, and more specifically, to a Synology hard drive. So, long-time Synology veterans might not be huge fans of the fact that this system is only available in a 4TB capacity and that there is no means to install alternative hard drives or get the system without one. However, realistically, they are not the target audience for this product.

Additionally, there is no avoiding that the system OS and a single 5400RPM HDD (if it is the HAT3300 inside) definitely adds up to system slowdown during even vaguely busy periods of use. Numerous times during the testing of the device, during backups, indexing or client synchronization the poor multi-tasking of a single HDD resulted in slower responses. Synology are clearly aware of this too, as on numerous occasions the BeeStation GUI would warn me to expect responsiveness to decrease during these periods. I appreciated that the system was warning me, but nonetheless this does not excuse the overall slow response that is clearly the result of the hardware on offer here.

The Beestation is Only Available as a 1-Bay – No RAID (at Launch)

Going further on the subject of the 4TB storage, it’s also surprising to see Synology roll out this system in a single-bay configuration. If you had told me that Synology was rolling out a new low-powered alternative to the likes of the WD My Cloud, I would have bet that the first solution would be a 2-Bay/RAID 1 ready solution. However, the BeeStation only features a single 4TB hard drive, meaning the redundancy/failover/safety net of RAID is not available here. The system does feature two USB ports, allowing you to connect USB storage and set up an automated backup to those external drives, and with its gigabit network connectivity, you can backup off-site or to another system in your local area network, which are all great backup options. But the fact that the system’s core storage does not have any kind of failover in this launch product is quite disappointing for a brand that takes storage seriously, and I would much rather have seen at least a two-bay version of this product at launch. It kind of has an all-eggs-in-one-basket feel about it that, if you do not have up-to-the-second synchronized backups off-site, could lead to hot data being lost very easily.

No App Centre = No Popular 1st/3rd Party Apps

Once again, this is a criticism that stems from more experienced Synology DSM NAS users, and arguably one that won’t arise from Synology’s new target audience for this product, but the lack of any kind of app center for tailored add-ons on BSM and the BeeStation is really disappointing. Synology has a phenomenal catalog of applications and services in its app center that allow users to curate, categorize, and access files in very tailored ways. You’re missing out on a video application for streaming your media with scraped metadata and transcoding, an audio application to share your albums and curate your playlists, and support for third-party multimedia tools for seamless access to third-party clients – these are just the multimedia options you’re missing out on in the BeeStation due to its lack of an app center or any kind of app store, as you would find in DSM.

Digging a little deeper, you suddenly realize the full range of applications and services Synology has offered for years that are just not available here to be downloaded conveniently at your whim from an app center. There is no denying that Synology is going to improve BSM over time and likely roll a number of these key first-party applications into the base BSM package. But if you are someone used to a Synology NAS and one of the reasons you chose it was because of the more application-rich experience compared to WD NAS OS, QNAP’s QTS, or even the Seagate NAS OS (which might well be EOL now), the Synology BeeStation is not going to be for you.

Requires a Synology Account to Set Up, and LAN is OFF by Default

This is a relatively minor point, but in some circumstances, it’s incredibly crucial for some. When setting up the Synology BeeStation for the first time, it’s important to note that you are not setting it up over the local area network in the majority of cases. Setting up the BeeStation requires the system to be plugged into an internet-accessible network, and then setup is conducted via an online portal using your serial number. A Synology account needs to be created during its setup, and by default, the system is accessible via the internet, through Synology’s servers. To Synology’s credit, it still manages to be one of the most secure NAS platforms out there, with data transmission encrypted by default via the remote access service, and features such as SSH are not enabled by default. But there are users who prefer using their NAS system exclusively offline, limiting access to only the local area network, and manually injecting updates from their client system. I was surprised during my first experimentation with the device to find that local area network (LAN) access is disabled by default.

Again, I understand that Synology wants to remove any tricky customization or configuration choices for users who might want a simplified and streamlined cloud experience. However, local area network access I would consider to be a base-level requirement. In the event that you lose access to the system via the internet, or if you lose access to the system despite being in the same room as it, the fact that LAN access is disabled by default may prove extraordinarily tricky. A great example would be the WD security incident I mentioned earlier. One reason users were particularly impacted by WD turning off the My Cloud servers was that WD My Cloud NAS devices have LAN disabled by default. This meant those users could not access the system during that internet outage unless they used a complicated client tool method to enable it. Although this method seemed relatively straightforward to the more tech-savvy, it proved overwhelming and complicated to the less storage and network-savvy audience these products are targeted towards. You are likely able to use Synology Assistant to log into the system via local area network access and reconfigure this option via a client application, but even then, it’s by no means a streamlined process. Nevertheless, I do think disabling LAN access on the system by default is perhaps a little shortsighted and overzealous.

Synology BeeStation Personal Cloud – The Final Verdict

The Synology BeeStation marks a significant shift in Synology’s product line, targeting a new segment of users with its simplified yet functional design. This device stands out as an excellent middle ground between ease of use and a comprehensive private cloud system, providing secure and seamless access to stored data. While it is incredibly user-friendly and easy to set up, the lack of LAN access by default and its single-bay, 4TB-only configuration at launch might limit its appeal to more tech-savvy users or those seeking greater flexibility and expandability. The BeeStation’s unique selling point is its simplicity, making it a compelling choice for those new to NAS systems or for users who prioritize ease of use over extensive customization options. However, its simplicity also means that it lacks the extensive app support found in Synology’s DSM platform, potentially disappointing users accustomed to the richer application ecosystem offered by Synology’s more advanced models.

For users concerned about security, the BeeStation still upholds Synology’s reputation for secure data handling, with encrypted data transmission as a standard feature. However, experienced users who prefer a more hands-on approach to their NAS setup might find the BeeStation’s lack of advanced configuration options and its reliance on internet access for setup somewhat restrictive. In terms of market positioning, the BeeStation fills a gap left by other brands like WD and Seagate in offering ‘Easy NAS’ systems. Its competitive pricing, particularly considering the included 4TB of storage, makes it an attractive option for users seeking a private cloud solution without the recurring costs associated with third-party cloud services. Despite these potential drawbacks, the BeeStation is a solid entry-level NAS solution, especially for those seeking a personal cloud with minimal setup and maintenance. It may not be as feature-rich as Synology’s DSM-based NAS devices, but for its intended audience, the BeeStation provides a well-balanced combination of functionality, ease of use, and affordability. Synology’s move to cater to a broader, less technically inclined audience with the BeeStation demonstrates their understanding of market trends and user needs, offering a solution that balances simplicity with the reliability and quality Synology is known for.

In the end, the Synology BeeStation is an ideal choice for users seeking a straightforward, reliable, and cost-effective personal cloud solution. It represents Synology’s commitment to diversifying their product range, catering to the evolving needs of different user segments. While it may not suit everyone, especially those looking for advanced features and customization, it excels in its role as a user-friendly, secure, and affordable entry-level NAS device.

 

Where is the Synology RS1224+ Rackstation?

Synology is arguably one of the most popular brands in the entire private server market, and once you then factor in the large number of small and medium-sized businesses migrating away from cloud services and onto their own private NAS, who have been flocking in their droves towards Synology, you can understand why they are something of a big deal. Almost 25 years, the brand has been producing numerous desktop and rackmount NAS solutions (alongside a bunch of other side hustles like routers, storage media, business surveillance tools, and more), but in particular, their growth in the rackmount market in the last 5 to 7 years has been genuinely impressive. Which brings us to the subject of today’s article, where the hell is the Synology RS1224+ RackStation NAS? There has been an undeniable shift in the home lab and small business community away from desktop NAS devices and towards small-scale rackmount solutions, and Synology’s recent releases have certainly capitalized on this, thanks to improved smaller-scale four and eight-bay rackmount servers appearing in their product portfolio.

This combined with changes in the baseline hardware of several of their more recent releases have led to many users looking for a very specific kind of Synology rackmount! It has to be compact, it has to be powerful, it has to be scalable, and it has to be reasonably priced – currently, Synology only provides one solution that fits the bill in every regard, the 2020/2021 released RS1221+, which, despite its merits, is still a system that is almost 3 years old, leading many to question the benefits of investing in a system that is perhaps not as cutting edge as the rest of Synology’s portfolio currently stands. The answer, of course? A refresh (something Synology tends to do with their portfolio every two to three years), which would be the Synology RS1224+. Today we want to discuss everything we know, confirm this unit is coming, the expectations we have, and whether it’s worth waiting for it.

Is the Synology RS1224+ Rackstation NAS ACTUALLY Coming? YES

Is the Synology RS1224+ NAS coming? Well, yes! As early as autumn 2023, we saw numerous references to the RS1224+ model ID floating around in the backend of firmware updates and accidentally left in product compatibility pages on official Synology sites. Equally, there was even a Synology RS1223+ model ID appearing in summer 2023, perhaps indicating that this system was designed to arrive earlier than it has. In more recent weeks, users have taken to digging into the latest Synology DSM firmware updates and finding further references towards the existence of a Synology RS1221 (along with a couple of powerhouse expandable rack mounts, and a series of expansion boxes).

None of this is unusual, and for those willing to put in the extra time, you can often find model IDs of upcoming devices if you know where to look. The crucial detail is that clearly a half-depth eight-bay rack mount is indeed on the way from Synology and given its formative mentions in summer 2023, and continued references in 2024, it would indicate that this is a system that Synology has already well featured on their roadmap and factored into their product portfolio.

If you want to play devil’s advocate, one might argue that this product is only a placeholder, a spreadsheet template item, or a hypothetical product that Synology just wants to enter in order to maintain its position in their database. Although that’s not impossible, realistically, there are simply too many references available at this point to deny that Synology is clearly rolling out a product of this hardware and model configuration. Equally, off-the-record discussions with Synology representatives further bolster this point. Ultimately, I think it’s undeniable that Synology is going to continue this product series, but that leads us to the next question: why are users so enamored with the release of the RS1224+?

Why Are Users Waiting for the Synology RS1224+ Rackmount NAS?

As I mentioned earlier, there has been a trend shift away from desktop devices for certain kinds of users. Home enthusiasts often find it considerably more convenient to purchase a small or even medium-sized rack cabinet to be kept somewhere on their property, which can be considerably more efficient for applying numerous rackmount servers than the alternative of utilizing desktop space filled with tower chassis devices. Equally, most businesses do not want to run their main backup or operation server in the same offices they work in and either wish to utilize a separate storage area on the premises or even a small area of physical storage off-site for network and remote personal cloud storage. Much like home lab users who do this for fun, business users can often see tremendous benefits in more modular and compact multi-rackmount devices compared with that of desktop.

However, this reasoning was also largely born out of the fact that right now devices and their physical scale have changed dramatically over the last few years. If you go back even as little as a decade ago, a rackmount device was considerably bigger in depth, much less power-efficient, considerably noisier, and was just generally a much more enterprise and industrial proposition. Thanks to growing efficiencies in server components, smaller but effective cooling systems being developed, and larger storage media allowing systems to occupy fewer storage bays for higher capacity, rackmount devices no longer need to be the big hulking metal monsters they once were, and these days you can pick up four and eight-bay rackmount servers quite easily and affordably. All of this has added up to why users would not only be positively in favor of the release of a new compact, but powerful rackmount NAS system, and why a system like the RS1224+ would be equally popular.

Synology has released several half-depth 30 cm rackmounts (and 40 cm dual power supply rackmounts) in the last few years, a great example being the Synology RS422+, a small, affordable rackmount that provides a decent base level of hardware but does lack the expandability of other devices in their portfolio. Equally, at the start of 2023, Synology rolled out several new medium and large business rackmount devices that provided tremendous power and scalability – but these systems were considerably larger, much more power-hungry, and several times more expensive than the older RS1221+. The perfect middle ground here is the Synology RS1224+, hence why users are sitting quite comfortably on the fence about every other device until they know whether this system is truly arriving and, when it does, what exactly its hardware caliber will be. Let’s discuss what we predict and what we comfortably know about the Synology RS1224+ hardware.

What Are the Estimated Hardware Specifications of the Synology RS1224+ NAS?

As I mentioned earlier, the Synology RS1224+ would not be a completely new and unique product series by the brand but would be a refresh of the existing compact eight-drive rackmount series that the brand has been working on now for more than 5 years. Alongside maintaining a clearly defined portfolio across the whole range of desktop and rackmount devices that they provide, Synology also takes special care to make sure there is not too much overlap when it comes to all of their solutions. Typically when you look at the Synology portfolio, you find that solutions tend to be between $50 and $100 difference in price, and each solution takes that extra bit of investment and puts it into internal performance, total storage, or network connectivity. That also means that products in the Synology portfolio have a tendency to use a small group of CPU and memory combinations and then spread them across a variety of different storage scale devices. This all adds up to us being fairly confident in predicting the internal hardware that the RS1224+ arrives with.

The previous generation arrived with an AMD V1500B quad-core x86 CPU, but Synology has slowly started refreshing all devices with this CPU from the 2019 and 2020 generation towards the new AMD embedded Ryzen V1780B processor. Alongside a higher base clock speed, this is also a more capable CPU, though it does still arrive in the same V1000 product family from AMD. The Synology RS1224+ will definitely arrive with this CPU, as the company has already started rolling it out in their Plus series rackmount, as well as the system definitely arriving with ECC memory. ECC memory has been provided with every single Plus series rackmount that Synology has rolled out in the last 5 years and the RS1224+ will be no exception to this. However, it is still yet to be seen whether the system will arrive with 2GB, 4GB, or 8GB, as Synology has been scaling up the base level of default memory on their systems in the most recent generation refreshes. The rest of the system architecture is fairly easy to predict, with the exception of the network connectivity (more on that in a moment), but below is the expected specifications of the Synology RS1224+ RackStation:

Specification	Detail
Model	Synology RS1224+ NAS
Price	$(TBC)*
Form Factor	Half-depth / 2U RackStation
CPU	AMD Ryzen Embedded V1780B*
CPU Details	4-Core/8-Thread, 3.35GHz
Memory	8-32GB DDR4 UDIMM ECC
Storage Bays	8x SATA 3.5″/2.5″ (Add 4x More drives with the RX Expansion)
Networking	1x 10GbE Copper (10GBASE-T)*
Expansion Slots	1x PCIe Gen 3×8
LAN Ports	2x / 4x RJ45 1GbE LAN*
Expansion Port	1x eSATA
USB Ports	2x USB 3.2 GEN 1 (5Gb/s)
Dimensions	88 mm x 482 mm x 306.6 mm
Dimensions (RP Version)	88 mm x 482 mm x 407.5 mm
Warranty	3-Year Warranty (5yr Opt)
Additional Notes	*massively TBC!!!

There is, however, one area of ambiguity that is still present in the specifications of the Synology RS1224+, the default network connectivity! The system will definitely arrive with at least a couple of 1GbE network ports and will definitely provide a PCIe 3 x8 slot in order to upgrade network connectivity and add combo cards later in the system’s life if needed.

However, what about 10GbE? At the tail end of 2023, Synology saw the release of the Synology RS2423+, a similarly hardware-designed Plus series RackStation solution, that was fully expected to arrive with gigabit networking only. However, when it arrived, Synology provided a 10GBase-T networking port by default (not via a PCIe upgrade, but as standard). Now, this is a 12x HDD system, so there is more than enough media to fully saturate a 10GbE network connection. However, this did not stop Synology in the previous four generations of that RackStation product series from only providing 1GbE by default, so why the change now?

Synology has faced growing criticism from prosumers and small business users for their rather restricted default network connections, limiting the majority of solutions to either 1GbE in their standard class and 10GbE in the power user and enterprise models. Many users have raised questions about Synology perhaps utilizing 2.5 gigabit Ethernet network connections, as used by a majority of their competitors. Others would state that 2.5GbE is something of a technological fad, and 10GbE is the only natural path to go down, so that does bring into question allocating lanes internally to this network bandwidth. The reason I bring the whole thing up is simply that if Synology changed its position on 10GbE on the 12-bay RackStation, it is totally believable to think that they would do so on the Synology RS1224+. Plus, as this is still an eight-bay system and that too could fully saturate a 10GbE even with hard drives, not just SSD. This is still a lingering question on this system and one that we probably won’t know the answer to until launch, but nevertheless, I think there is enough evidence here for us to wonder if Synology will do the right thing and roll this system out the gate with 10G.

When Do I Think the Synology RS1224+ Rackstation Will Be Released?

Given that the model ID of the RS1224+ and RS1224rp+ both arrive with the ’24’ suffix, that typically means that Synology will roll this system out in the first 6 months of 2024. That is still quite a wide and broad remit for a release date, but typically Synology tends to roll out business and enterprise-grade solutions in the first quarter of the year (based on previous experience and other releases we have observed). Nevertheless, at the time of writing in February 2024, we are making our way into the halfway point of the first quarter of 2024, so Synology would be cutting it quite fine, and we have yet to even see provisional leaks of this system via the usual supply chain and compatibility listings to the degree that we normally would prior to a launch. With regards to pricing, that is one area where Synology tends to be thankfully incredibly consistent, and you can fully expect the RS1224+ to match the $999 to $1199 price tag of its predecessor. Stay tuned to NAS Compares as we keep an eye out for this system and discuss whether it deserves your data.

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

Taking the Synology Beestation Apart to See What is Inside…

Synology is approaching a whole new kind of user with the release of the new BeeStation personal cloud simplified NAS system. For all of the years that we have discussed the Synology NAS platform, very few solutions from the brand have been this hassle-free and easy to use. A lot of this simplification by Synology in BeeStation, DSM, and the system’s approach to storage stems from the system being a far more closed platform than previous DiskStation and rackmount solutions that have come before it. Many more experienced storage veterans and IT specialists wonder about how the Synology BeeStation is put together, how its internal hardware and components differ from traditional DiskStation alternatives, and how exactly the system is managing that inclusive 4TB of storage. So in today’s video, I got my screwdriver out and decided to take apart and completely disassemble the Synology BeeStation 4TB model. If you are reading this article, that is likely because you are either a user on the fence who is considering buying this system and wants to know about how to take it apart in the event of maintenance, or you are a fellow reviewer or tech specialist who wants to use this guide as the means to understand how to take the BeeStation apart. Regardless of who you are, I hope you enjoy this guide and attribute and share it if you find it helpful. Before we delve further, we need to discuss a few disclaimers.

Synology Beestation Disasembly – IMPORTANT WARNING!

This is a really, really important point. Taking apart the Synology BeeStation runs a significant risk of not only damaging your data but also completely nullifying any hardware or software support that Synology will provide you. The BeeStation was designed to be a closed system and not targeted towards higher-end tech enthusiasts, and therefore does not allow the same easy dismantle procedure that you find in the DiskStation range. This Synology BeeStation was provided to me by Synology UK, and I am dismantling the system without their assurance or without their authorization to do so; the same needs to be applied to your own BeeStation system if you intend to follow the steps in this guide to tear down and dismantle it. This system was not designed to be taken apart, and taking it apart may result in the following:

• You might cause damage to the hard drive inside via static electricity, motion, or physical pressure.
• The BeeStation casing is an exceptionally tight-fitting enclosure, and dismantling it will almost certainly leave marks and clear indications that you have done so, which will invalidate any hardware support available to you as you have tampered with the system and performed actions that are not covered by the hardware warranty.
• You run the risk of scratching the internal motherboard, PCB, or delicate components during the dismantling of the BeeStation, which will result in complete system failure at worst and detrimental performance drops at best if this occurs.

Do not proceed with dismantling your Synology BeeStation unless you are happy to run the risk that it may be deemed inoperable or that your support by Synology may cease as a result.

Additionally, the Synology BeeStation includes numerous measures to back up the content of the system’s data and set up to the Synology C2 cloud, a connected USB drive, or at an object file/folder level to third-party cloud services. It is extremely recommended that you have an up-to-the-second backup in place before you attempt any of the steps in this guide. Any data loss resulting from following the steps in this guide is purely at your own discretion, and myself and NAS Compares cannot be held accountable. Bottom line, be aware that what you are doing right now is outside of what this system was supposed to do, and that you are doing so at your own risk. Understand? Good. Let’s get on with dismantling the BeeStation and tear down this cost-effective NAS.

Also, it is HIGHLY RECOMMENDED that you read through the steps completely first, before you begin dismantling your BeeStation NAS, as it’s decent bits more layered in the access compared with a normal Diskstation NAS system.

Dismantling the Synology BeeStation Persona Cloud – A Step By Step Guide

First thing you need to do is disconnect all ethernet (LAN), power cables and USB devices and give the system sufficient time to allow the HDD inside to spin down. Then carefully turn the device up and have the base vent panel face up. Again, be CAREFUL as this system features a mechanical HDD inside and that can be susceptible to shock/motion damage.

Next you need to slowly and carefully peel back the rubber foot panel located at the base, at the front of the Beestation (i.e the single LED light side). It is held in place with strong adhesive, but you can replace it back after opening the case up later, as the rubber foot sits in a grooved panel and the adhesive has plenty of reuse!

Under the rubber panel are two Phillips/cross-head screws. There are the ONLY external means to open up the enclosure/casing of the BeeStation.

Remove each of these screws (keep them to one side and make sure to remember they are the base screws, as the system has 2 kinds of screws in it’s construction and mixing them up with rip the screw holes to pieces!

Removing these two scews will allow you to apply a small above of pressure to leverage the front panel of the BeeStation NAS to be removed. Important – do this carefully (that word again!) as the entire casing is made up of 2 pieces and its super easy to crack it in two!

The top part of the front panel is actually an L-shaped panel that has the fully ventilated dust panel attached. Mkae sure that your ease the panel off carefully enough not to break those 4 hooks at the top, as these are what align the top panel with the rest of the casing.

Slight side note, but for those that care about dust build up on 24×7 systems like the BeeStation, this can be quite useful to perform cleaning. Anyway, carrying on!

Next up os removing the Hard Drive that the Beestation Personal Cloud arrives with. The first thing you need to remove is the 2 smaller screws located around the edge of the casing. DO NOT REMOVE THE 2 LARGER SCREWS IN THE MIDDLE!!! These larger screws hold the HDD in place and you need to do this much later, or else risk the drive moving around during the dismantling.

Each screw will be easy to remove, however there are actually 3 more screw located around the base of the framework. They are tricky to reach, and a longer screwdriver would be recommended, but it can be done with an ordinary 15cm + screwdriver will get the job done.

At the front base area, you can find two black Phillips/cross-head screws that you need to remove. You will need to come at there from a slight angle if you only have a short screwdriver. Important – DO NOT USE AN ELECTRIC/AUTOMATIC SCREWDRIVER!!! Notwithstanding that you will tear the soft screw to pieces, you might cause vibration that will be damaging to the HDD next to the screw! Do it the OLD SKOOL way!

The last screw is much harder to spot and reach, it is located at the bottom-back of the enclosure, on the NON-Motherboard side. You will need to come at it from a slight angle, even with a longer screwdriver. Note, you COULD have removed the top panel attached to the HDD in order to get to the screw a little easier, but I personally would rather the HDD remains in an immobile cage throughout this part of the Beestaion teardown. It’s your call!

That is the last screw that you need to remove and , once it is done, you can begin the removal of the HDD clip/cage.

The HDD Clip/cage will slide out sideways (with a little resistance). BE CAREFUL with the removal of the HDD cage/clips, as the right-hand side will have the controller board (which has the heatsink on top of the CPU, and a bare PCB – which can be super susceptible to static and moisture!

One you have removed the HDD Cage tray, you will now have three components on the table:

The one we want to focus on is the HDD tray/cage. Carefully turn it around and lay the drive facedown on the table.

Once the drive is ‘face down’, you need to carefully (yes, THAT word again! Take a drink) remove the two silver screws, Try to touch the blue PCB controller board as little as possible.

Once you have removed those two screws, you need to either slide the controller board away from the Hard drive, or slide the hard drive away. You are doing this to disconnect the SATA connector that is soldered to the controller board. Do NOT leverage the hard drive upwards/downwards, as you run the risk of breaking the connector.

The controller PCB should come away very easily and with little resistance. But before we move forward, it’s worth checking the SATA connector is unharmed.

Take a closer look at the SATA connector. It should look like this:

This is what the storage side of the Synology Beestation BST150 looks like:

The underside of the controller board is where we find a large black heatsink panel that covers the HDD and 1GB DDR4 memory. IMPORTANT – I still have numerous tests to perform on this device for the review, comparison videos and guides for this device. Therefore I am not going to remove this heatsink, as it might result in detrimental performance that will undermine future content.

However, for those that want to know, underneath this heating panel is the Realtek RTD1619b quad core 64bit ARM processor that runs the Synology Beetstation and BSM services, as well as 1GB of DDR4 memory that arrives in presoldered modules on the main PCB. Ther is NOT an kind of SODIMM slot and, given the price and CPU choice in terms of efficiency, this is not a huge surprise.Therefore, memory upgrades on the Synology BeeStation are not possible.

The system software package is delivered via a smaller component that arrives pre-labeled at the factory with the software revision that the BeeStation arrives with. It is worth noting that, as time rolls on, Synology are going to be rolling out numerous firmware updates and (as is the case with the Synology Diskstation/DSM systems) it will update the installer and bootloader package on this chip no doubt.

Each of the physical connections (1GbE RJ45, Power delivery, USB Type A+C and physical buttons) are soldered to the PCB and are not provided on any kid of sister board.

Interesting, Synology have not just cloned and reused the DS124 hardware configuration here (though there are certainly areas of cross over) and instead have designed a whole new PCB layout and scale. The board (model ID and serial identification below) need to factor in the absence of any active cooling system (i.e a fan) on the Beestation, that was present on Diskstation systems like the DS124 and DS223j that arrive with a similar hardware configuration. Equally, this system changes one of the USB ports to Type C and has a very different back port arrangement to spread out.

Next, removing the Hard Drive from itsplastic handles. The HDD is held in place by 4 screws that go directly into the same four screw holes that are usually used by HDD bays on Diskstastion NAS that utilize trays. Ther are four screw in each corner. Important note for later – Make a note of the clips and direction that are on either side of the HDD – whether you want to reassemble this Beestation to the factory build OR you are considering exploring larger HDDs, getting these clips the wrong way around or in the wrong direction will, at best, mean it won’t for back together and you need to redo them, or at WORST, you end up damaging the controller board and casing as you attempt to re-insert the drive.

Each screw uses a counter-sunk system and also arrives with a rubber washer between the screw head and the plastic. This means that you do not need to fully remove the screw, as there is a small % of space left. Regardless, just remove the four screws and each of the side panels should come off very easily.

Once again, make sure you keep track of which panel goes with each side of the HDD – As this will be a right pain during reassembly. An important area of note here is that IF you are considering adding larger/alternative drives to the Beestation and you have your heart set on an SSD, you are going to need a 2.5″ to 3.5″ HDD adapter, as the screw holes that the tray clips AND the PCB Backboard are not available on a 2.5″ SSD. This does also open the door to the potential for a Dual 2.5″ SATA SSD to 3.5″ SATA Adapter case, which would provide the performance benefits of 2x SATA SSD in a RAID 0, or the redundancy benefits of 2x SATA SSDs in a RAID 1, if the case supports internal RAID 0/1). Here are two options:

2.5″ to 3.5″ SATA Adapter ($7.99+) Find on Amazon HERE

2x SATA 2.5″ SATA to 1x 3.5″ SATA Adapter RAID Caddy (19.99+) Find on Amazon HERE

However, there is considerably more to adding a new hard drive to the BeeStation than just the physical injection!

This reveals the drive in all it’s glory (in this case, a Synology HAT3300 which is a Seagate Ironwolf NAS HDD with Synology Firmware, but yours might well be the HAT3310, which is a Toshiba N300 drive with Synology FW). At launch, the Synology BeeStation arrived with just a single 4TB option, but no doubt in the further (perhaps when you are reading this) Synology have rolled out bigger HDD options or RAID equipped multi-bay versions.

But, there you go! That is the disassembly of the Synology BeeStation. I hope you enjoyed this guide and found in useful/informative! REMEMBER, I did this to show you what the inside of your BeeStation Personal Cloud looks like, so YOU DON’T HAVE TO! If you have any further questions, you can reach out to me on robbie ( at ) nascompares.com, or use our free advice section located on the right hand side of the page. Alternatively, you can reach us on our Discord HERE, our community forum HERE, or for faster and more personal support over on KoFi Commissions HERE. If you use and/or share the content of this guide online, please help us spread awareness of our platform and the work we do by backlinking us appropriately! Thanks for reading!

---

Synology BeeStation Personal Cloud Review – Quick Conclusion

READ THE FULL BeeStation Review HERE

Synology has clearly done their homework on the development and presentation of the BeeStation private cloud. They are targeting a whole new audience with this system, and therefore, criticisms based on experiences with their other hardware are likely to fall on deaf ears. The BeeStation is probably one of the best middle grounds I have ever seen between an easy-to-use and exceptionally easy-to-set-up private cloud system, while still managing to provide smooth and seamless features for accessing and sharing your private cloud’s storage securely. Looking at this system with a more network-savvy microscope kind of defeats the point, and I’ve tried to be fair in my assessment. The lack of LAN access by default seems a little odd, and launching the BeeStation series in this single-bay, 4TB-only fashion may be a bit of a marketing misstep, but overall, what you’re seeing here is an effectively priced and scaled private cloud system. It’s a fantastic alternative to third-party clouds and existing simplified NAS systems. With many users keeping an eye on their budgets and tightening costs, Synology, known for its premium position in the market, had a challenge scaling down to this kind of user. However, I have to applaud Synology’s R&D for creating a simple and easy-to-use personal cloud solution that still carries a lot of their charm and great software reputation. It may not be as feature-rich as DSM, but BSM does exactly what it says it will do, and I think the target audience it’s designed for will enjoy the BeeStation a great deal!

DEAL WATCH – Is It On Offer Right Now? These Offers are Checked Daily

---

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

Synology BeeStation Personal Cloud Review

What IS the BeeStation? Of all the products I’ve spoken about from Synology in nearly 25 years of solutions from the brand, the new BeeStation is possibly one of the most conventional yet surprising they have ever released. We first spoke about the BeeStation, otherwise known as the BST150-4T, halfway through 2023, when we started hearing rumors about Synology’s new entry-level solution that was shaping up to challenge the likes of WD My Cloud and My Book solutions. Synology has been providing impressively capable personal cloud solutions for a considerably long time, but it would be fair to say that for the majority of users who just want a simple cloud solution that is easy even for a child to set up, DSM isn’t quite as straightforward as they would like. The BeeStation and BSM hope to remedy this with Synology providing what is potentially the most user-friendly and easy-to-use personal cloud solution they have ever provided, as well as inviting positive comparisons against the likes of Google Drive and iCloud in terms of price. Roll in the fact that the system already arrives pre-populated with four terabytes of storage and is priced at just $199, and what you find here is one of the biggest brands in the world in network attached storage trying to reinvent the wheel that they themselves had a big part in designing! If you are reading this, it is because you are wondering whether the Synology BeeStation is the perfect fit for your simple, low-scale, and low-cost private cloud. So today, I want to tell you the five reasons why I can highly recommend the Synology BeeStation, as well as providing five reasons why you might want to give it a miss.

Note – You can watch the FULL YouTube Review of the Synology BeeStation HERE

Synology BeeStation Personal Cloud Review – Quick Conclusion

Synology has clearly done their homework on the development and presentation of the BeeStation private cloud. They are targeting a whole new audience with this system, and therefore, criticisms based on experiences with their other hardware are likely to fall on deaf ears. The BeeStation is probably one of the best middle grounds I have ever seen between an easy-to-use and exceptionally easy-to-set-up private cloud system, while still managing to provide smooth and seamless features for accessing and sharing your private cloud’s storage securely. Looking at this system with a more network-savvy microscope kind of defeats the point, and I’ve tried to be fair in my assessment. The lack of LAN access by default seems a little odd, and launching the BeeStation series in this single-bay, 4TB-only fashion may be a bit of a marketing misstep, but overall, what you’re seeing here is an effectively priced and scaled private cloud system. It’s a fantastic alternative to third-party clouds and existing simplified NAS systems. With many users keeping an eye on their budgets and tightening costs, Synology, known for its premium position in the market, had a challenge scaling down to this kind of user. However, I have to applaud Synology’s R&D for creating a simple and easy-to-use personal cloud solution that still carries a lot of their charm and great software reputation. It may not be as feature-rich as DSM, but BSM does exactly what it says it will do, and I think the target audience it’s designed for will enjoy the BeeStation a great deal!

DEAL WATCH – Is It On Offer Right Now? These Offers are Checked Daily

---

Synology BeeStation Review – Packaging and Presentation

The BeeStation arrives in fairly modest packaging that, although is pretty comparable to the majority of other Synology NAS solutions in the market, I will highlight that it arrives with a four-terabyte hard drive pre-installed. Consequently, I’m a little surprised that the packaging was not just a little bit more robust.

As petty as this sounds, I appreciate that this is an affordable item and indeed, unlike a number of the other solutions which are going to be exclusively retail biased, this one has a higher possibility of being purchased over the counter and therefore protection isn’t quite as necessary for logistics as perhaps their other solutions are. Nevertheless, shock and motion damage in transit is a genuine real thing, and unlike a number of their other solutions that arrive in pre-cut foam packaging, this system is only held in place by a single-layer framework of cardboard. Not terrible, but not exactly great for a pre-populated NAS system. The kit arrives with the BeeStation system itself, a modest external power supply, an RJ45 Ethernet cable, and information on first-time setup and the inclusive 3-year warranty.

The external power supply is fantastically modest and comparable to that of other one by Synology NAS systems. This is an efficiently powered system that runs on an ARM 64-bit processor and with only a single hard drive inside, power consumption is going to be exceptionally low and therefore the max PSU power really doesn’t need to be that much. Additionally, the PSU features regional power clips. It’s a shame that they do not also include regional clips for other areas, as some people may be deploying this system in different places on the go because of its lightness and portability, but I understand why Synology probably doesn’t entertain this and continues to add further e-waste to the potential.

Overall, I can’t really fault the retail kit here; it’s providing everything you’re going to need to deploy this straight out of the box and up and running within 2 to 3 minutes. Even more so than any other Synology solution as this one even includes the storage media pre-populated with firmware already pre-configured for that specific drive. I do wish the retail packaging was a little bit more protective, but again this is a relatively minor point for a solution that’s $199 all in. Let’s discuss the hardware and design.

Specification	Details
Capacity	4TB
Processor	Realtek RTD1619B
Memory	1GB DDR4
LAN Port	1 x 1GbE RJ-45
External Ports	1 x USB-A 3.2 Gen 1, 1 x USB-C 3.2 Gen 1
Dimensions (HxWxD)	148.0 x 62.6 x 196.3mm
Weight	820g
Supported Browsers	Google Chrome®, Firefox®, Microsoft Edge®, Safari® 14+
System Requirements	Windows 10 64-bit (build 19041+), Windows 11, macOS 12.3+
Mobile Apps	iOS 15+, Android 8+
Certifications	RoHS, FCC, CE, BSMI, RCM, EAC, UKCA, KC, VCCI
Package Contents	BeeStation unit, AC adapter, RJ-45 cable, Quick start guide
Warranty	3 years

Synology BeeStation Review – Design and Connectivity

Synology could have easily reused one of their existing hardware chassis from the DiskStation series when creating the BeeStation. However, the BeeStation is a completely unique and new chassis to the Synology product family and is one of the smallest enclosures they have ever released, especially when you factor in that it’s arriving with a 3.5-inch SATA hard drive already pre-installed.

The device has the Synology Bee logo adorned on either side, with ventilation on the base and the top panels. Cooling isn’t too much of an issue on this rather modest specification system. And thanks to the absence of any kind of SSD internally, rising temperatures are not really going to be a tremendous amount of concern, even in 24/7 operations. Indeed, the top ventilation panel cannot be removed and has a metal panel underneath to filter air as it passes through the system. Synology states on numerous official pages that it is not possible to deconstruct this system without fundamentally damaging the external casing and undermining the ventilation and cooling system.

As the BeeStation only holds a single hard drive internally, there is a decent enough argument here that trays or features such as hot swapping are going to be largely useless, given the entirety of the system. Storage and services are running from that lone drive and its removal would immediately compromise the system. However, it is worth remembering that the HAT3300 or HAT3310 Synology 5400 RPM hard drive is the only drive you can use in this system and Synology does not endorse the usage of third-party drives in this system.

Indeed, the Synology software for this system that arrives with all of the packages pre-installed, after a little bit of digging, shows that it is seemingly locked to a Synology drive. No doubt more enterprising users will be able to migrate this over to a third-party hard drive, potentially undermining any hardware or software support by Synology, but you can largely guarantee there will be users doing this. 4TB is perhaps too low a glass ceiling for many users.

Returning to the subject of design, though. You really cannot fault the scale of this system. And thanks to its low power and low stature, it is largely silent when in operation any noticeable noise and not Synology’s sign of the BeeStation.

The front of the system displays a single LED that denotes when the system is powered on. It’s likely to announce whether the BeeStation is in setup mode, normal usage, or if there is an error that needs addressing (the system also has the expected audio beep for notifications and warnings). There’s no front-mounted USB, but the system does have USB ports and more on the rear. The rear of the system shows some fairly entry-level ports and connections, but for the $199 price point and rather modest audience this system is aimed towards, there isn’t too much to fault here.

The BeeStation features two USB 3.2 Gen. 1, 5 Gbps ports, including Type A and Type C. These ports can be used to connect external USB storage to the BeeStation, and access to this storage is immediately accessible via the Bee Files software user interface on desktop and mobile.

Additionally, BeeStation Manager also includes the means to backup the whole system storage to a connected USB via the system settings interface, as well as a more tactile and customizable individual object file finder backup option in Bee Files. Numerous USB backups can be created, scheduled, and several filters applied to ensure that only important or necessary files are backed up when needed.

Much like Synology DSM, there is also the option for a backup to be actioned automatically when a selected USB is connected to the system and auto-dismounted when the job is completed. The Beestation is a 1-Bay and the result is that although these USBs can be used to add external storage or backup storage, they cannot be used to add any kind of expansion and expand the original storage while maintaining existing share paths for remote access users.

The notable physical connection is the network connection, a 1GbE network port that serves as the only remote access point for this system. Previously, I have criticized Synology for continuing the use of 1 GbE network ports when the majority of their competitors, even at this price point, have started rolling out 2.5 GbE as standard, and given the 2.5x network performance bandwidth and relative inexpense at the production level between these two connections, it’s understandable that users may be annoyed. However, this is a system running on a single hard drive that is already going to suffer occasional drops in performance when simultaneous access is happening. Equally, the modest Realtek CPU inside this system is not really hugely well equipped to spread itself out across the hardware configuration on offer and still maintain that same level of efficiency and capability. Therefore, I’m not hugely surprised that Synology has opted for 1GbE on this modest BeeStation system, but do be aware that this will bottleneck the potential 180 to 200 megabytes per second performance that a hard drive like this is capable of.

Synology has clearly tried to differentiate the BeeStation series from their existing DiskStation range of prosumer and business devices, and the design we’re seeing here is certainly a great way to do this. Yes, we’re not exactly looking at hardware that will absolutely blow your mind, but for $199 once again, we are looking at a very well-put-together and quality feeling product from a brand that already has a well-established reputation for these things to maintain. Let’s discuss the hardware inside this device and what keeps this thing moving!

Synology BeeStation Review – Internal Hardware

Despite these Synology BeeStation arriving at a very modest scale, they equip this device with the same CPU found inside the majority of their Value and J series boxes. In the comparisons that I have previously made between the BeeStation and the WD My Cloud series, it is worth remembering that Western Digital was always quite conservative when it came to the hardware on their personal cloud systems. WD still provides exceedingly low-powered dual-core 32-bit ARM Marvell processors that, in 2024, are really showing their age. By comparison, this Synology BeeStation arrives with a 64-bit ARM processor, featuring quad-core and also coming with 1GB of DDR4 memory. This is the same CPU found in the one-bay DS124 and 2-bay DS223, but the way the BeeStation utilizes this hardware is notably different from that of its arguably more fully-featured DiskStation alternative.

This CPU is actually capable of doing a great many more things than what the BeeStation and BSM offer, but does provide a very robust and comparatively more powerful base for these more streamlined operations than what is found by other cost-effective alternatives on the market.

The system also arrives with 1GB of DDR4 memory that, again, is double that found in the majority of more budget NAS systems, and given this system only supports up to eight simultaneous active users, 1GB of DDR4 memory is definitely more than enough to handle the comparatively simplistic photo, file management, and backup operations largely associated with this system. This memory is not upgradable, delivered via direct-soldered chips on the internal motherboard, but the CPU is not especially good at handling memory in larger quantities anyway (I believe the maximum supported memory by the processor is 4GB), and thus, this good base level memory and CPU are only really let down by one thing about this system – the single SATA hard drive inside!

As mentioned earlier, this system running from a single SATA hard drive presents quite large challenges with regards to multiple operations at any given time. Those eight maximum simultaneous users have plenty of CPU processing power and memory to divide between them, but a single SATA hard drive is going to struggle massively with up to eight users and their individual file processing demands at any given time. This is precisely the reason that users migrated away from hard drives for running operating systems, favoring the use of SSDs, as hard drives simply do not stand up well to the rigours of simultaneous input/output in 2024. So, once again, a complete bummer!

Examining the internal hardware on the BeeStation feels a little overzealous, given the target audience. This system is designed for being by their very nature, less tech-spec interested. I have to give Synology tremendous credit for constructing a much more powerful option in the personal cloud space than the majority of other vendors competing for this tier of the market. Now, I just wish for storage options, RAID options, and just generally better scaling options for buyers at launch. But it’s not about what you’ve got, right? It’s about what you do with it! Let’s discuss the software and services of the BeeStation.

Synology BeeStation Review – BSM Software, BeeFiles and BeePhotos

Synology has impressively reimagined their premium DSM software experience, streamlining it to introduce the more user-friendly BeeStation Manager (BSM) package. At launch, BSM offers a complete web-based GUI accessible via web browsers, a downloadable client tool for Windows or Mac systems for synchronized OS file management, and two mobile applications: BeeFiles and BeePhotos.

The user experience and software suite available for engaging with their private cloud on the BeeStation are categorized into three main areas: system management, file management, and photo management, starting with system management, which can be the most daunting aspect for users transitioning from public cloud services.

System Management

The setup process is notably user-friendly, marking one of the best NAS experiences in my extensive data storage career. Initially, you activate the device, connect it to a network, and proceed to the Synology online BeeStation portal to create a user account. This process, which includes entering the device’s serial number, downloading the latest firmware, and creating a user account, is streamlined and efficient, enabling a fully operational personal cloud setup in under three minutes.

The web management interface, although simpler compared to Synology’s DSM, emphasizes simplicity for home users and individuals moving away from cloud services, making it deliberately sparse yet functional.

Main Command Interface

The initial interface displays available storage and the allocation of storage types, offering features such as inviting additional users to your shared space. With hardware not designed for heavy-duty use, akin to Synology’s J series NAS, it supports adding up to eight users through an invitation system via the online portal.

Backup and Support

BSM includes simplified system backup options, using either a local USB drive or Synology’s C2 cloud service for offsite backups, with additional backup capabilities through BeeFiles. This feature underscores the importance of data security and system configuration preservation.

Alert settings for system events, such as unauthorized access attempts and storage issues, are standard, ensuring users are informed of system status and security. For hardware issues, BeeStation allows remote device access by Synology support, requiring user-generated unique keys, ensuring user consent before support can intervene.

Technical and LAN Access

The system defaults to disabling LAN access, a point of contention given its implications for local network performance versus internet-based access. This decision, aimed at simplifying security for less technical users, may limit user experience under certain conditions.

BeeFiles and BeePhotos

BeeFiles offers a straightforward approach to accessing storage, akin to services like Google Drive or Dropbox, with apps for web, mobile, and desktop use, enabling easy file management and sharing among up to eight users.

BeePhotos provides a dedicated platform for photo and video management, incorporating AI for facial and object recognition to enhance photo cataloging and search functionality, though it has room for improvement in object recognition specificity.

Performance and Optimization

The system’s reliance on a single 4TB 5400 RPM hard drive limits its performance, especially in high-demand operations like indexing and thumbnail generation. This highlights a potential area for future optimization and hardware upgrades to enhance user experience.

In summary, while the BeeStation system demonstrates a polished software experience and presents a functional and cost-effective alternative to cloud services, its performance and hardware limitations are areas poised for future improvements. As Synology expands the BeeStation hardware lineup, users can anticipate enhanced functionality and value from these tools.

Synology BeeStation Review – Verdict and Conclusion

The Synology BeeStation marks a significant shift in Synology’s product line, targeting a new segment of users with its simplified yet functional design. This device stands out as an excellent middle ground between ease of use and a comprehensive private cloud system, providing secure and seamless access to stored data. While it is incredibly user-friendly and easy to set up, the lack of LAN access by default and its single-bay, 4TB-only configuration at launch might limit its appeal to more tech-savvy users or those seeking greater flexibility and expandability. The BeeStation’s unique selling point is its simplicity, making it a compelling choice for those new to NAS systems or for users who prioritize ease of use over extensive customization options. However, its simplicity also means that it lacks the extensive app support found in Synology’s DSM platform, potentially disappointing users accustomed to the richer application ecosystem offered by Synology’s more advanced models.

For users concerned about security, the BeeStation still upholds Synology’s reputation for secure data handling, with encrypted data transmission as a standard feature. However, experienced users who prefer a more hands-on approach to their NAS setup might find the BeeStation’s lack of advanced configuration options and its reliance on internet access for setup somewhat restrictive. In terms of market positioning, the BeeStation fills a gap left by other brands like WD and Seagate in offering ‘Easy NAS’ systems. Its competitive pricing, particularly considering the included 4TB of storage, makes it an attractive option for users seeking a private cloud solution without the recurring costs associated with third-party cloud services. Despite these potential drawbacks, the BeeStation is a solid entry-level NAS solution, especially for those seeking a personal cloud with minimal setup and maintenance. It may not be as feature-rich as Synology’s DSM-based NAS devices, but for its intended audience, the BeeStation provides a well-balanced combination of functionality, ease of use, and affordability. Synology’s move to cater to a broader, less technically inclined audience with the BeeStation demonstrates their understanding of market trends and user needs, offering a solution that balances simplicity with the reliability and quality Synology is known for.

In the end, the Synology BeeStation is an ideal choice for users seeking a straightforward, reliable, and cost-effective personal cloud solution. It represents Synology’s commitment to diversifying their product range, catering to the evolving needs of different user segments. While it may not suit everyone, especially those looking for advanced features and customization, it excels in its role as a user-friendly, secure, and affordable entry-level NAS device.

 

How to Upgrade the Hard Drive in Your BeeStation

Why Would You want to change the hard drive in the Synology Beestation? Whether you are an existing owner of the Synology Beestation or a potential NAS buyer who is considering moving away from public cloud services onto your own personal cloud, the Beestastion and BSM provide a fantastically user-friendly alternative to the Synology Diskstation and DSM solutions that the brand has been releasing for almost 25 years. The Beestation can be set up in minutes, sets up all the apps, storage and services in 3 clicks and is BY FAR the most user-friendly NAS system I have ever used! However, it DOES have 1 weakness… one rather sizable Achilles heel… THAT 4TB hard drive inside! The Synology Beestation (At launch – so that might change as time goes on) arrives with a single 4TB Synology HAT3300/3310 5400RPM Hard Drive for storing all your data. This can lead to a lower glass ceiling when it comes to your long-term storage – fun fact, The latest iPhone Pro models supports upto 48MP Apple ProRAW images, which captures more dynamic range at the cost of much larger files, around 75MB for each image. That would still allow just under 60,000 images on a 4TB drives – but once you factor in video backups, PC backups and more, 4TB of capacity is actually going to run out quicker than you think, especially if you connect the maximum 8 supported users. Then there is the performance barrier of a single 5400RPM HDD. Hardware are not great for larger simultaneous input/outputs (e.g lots of individual write operation tasks happening at the same time) and the response times and smoothness of the BSM/BeeStation experience will be diminished. You are also losing out on RAID failover, something that is largely unavailable in a 1 bay, but short of using a dual drive cage adapter (more on that later on) this is unavoidable.

This brings us neatly back around to the subject of changing the HDD inside the Synology Beestation to something with a higher capacity, maybe a Pro series drive with 7200RPM and more cache. or perhaps even a faster SSD instead of an HDD? Synology has not allowed this system to support hot swapping or easy accessibility to the drive media (understandable, as a 1 Bay system). Synology have released this device as an entry-level product that is not designed for more specialized use, so providing the means to upgrade the media and migrate system processes over to a new drive is NOT a straightforward process. Additionally, we should also take some time to discuss the risks and Synology’s position on this.

IMPORTANT WARNING!

This is a really, really important point. Taking apart the Synology BeeStation runs a significant risk of not only damaging your data but also completely nullifying any hardware or software support that Synology will provide you. The BeeStation was designed to be a closed system and not targeted towards higher-end tech enthusiasts, and therefore does not allow the same easy dismantle procedure that you find in the DiskStation range. This Synology BeeStation was provided to me by Synology UK, and I am dismantling the system without their assurance or without their authorization to do so; the same needs to be applied to your own BeeStation system if you intend to follow the steps in this guide to tear down and dismantle it. This system was not designed to be taken apart, and taking it apart may result in the following:

• You might cause damage to the hard drive inside via static electricity, motion, or physical pressure
• The Beestation uses a passive cooling system and strategic heatsinks around the internal components, allowing the system to be low noise thanks to a lack of active cooling fan. But changing the storage media inside might compromise this passive cooling system and therefore lead to unpredictable internal system temps or a detrimental effect of the system as a whole.
• The BeeStation casing is an exceptionally tight-fitting enclosure, and dismantling it will almost certainly leave marks and clear indications that you have done so, which will invalidate any hardware support available to you as you have tampered with the system and performed actions that are not covered by the hardware warranty.
• You run the risk of scratching the internal motherboard, PCB, or delicate components during the dismantling of the BeeStation, which will result in complete system failure at worst and detrimental performance drops at best if this occurs.

Do not proceed with dismantling your Synology BeeStation unless you are happy to run the risk that it may be deemed inoperable or that your support by Synology may cease as a result.

Additionally, the Synology BeeStation includes numerous measures to back up the content of the system’s data and set up to the Synology C2 cloud, a connected USB drive, or at an object file/folder level to third-party cloud services. It is extremely recommended that you have an up-to-the-second backup in place before you attempt any of the steps in this guide. Any data loss resulting from following the steps in this guide is purely at your own discretion, and myself and NAS Compares cannot be held accountable. Bottom line, be aware that what you are doing right now is outside of what this system was supposed to do, and that you are doing so at your own risk. Understand? Good. Let’s get on with dismantling the BeeStation and tear down this cost-effective NAS.

Also, it is HIGHLY RECOMMENDED that you read through the steps completely first, before you begin dismantling your BeeStation NAS, as it’s decent bits more layered in the access compared with a normal Diskstation NAS system.

What Do You Need for this Guide

There are actually not too many things needed for upgrading your Synology BeeStation Drive. I recommend the following:

• A Synology BeeStation (duh?)
• A SATA HDD (or SATA 2.5″ SSD with 3.5″ physical Adapter – EXAMPLE)
• A crosshead Phillip screw driver – the longer the better!
• The Synology Assistant Client Tool for Windows, Mac or Linux (installed on a system that is on the same local area network as the Beestation) – HERE
• A downloaded copy of the latest Synology BSM Software .pat file – Download it HERE

The Firmware is optional, as it depends on the upgrade path you choose, but it doesn’t hurt to have it downloaded and ready.

BACKUP YOUR DATA FIRST – How To Backup Your Beestation Personal Cloud NAS

It is INCREDIBLY important that you backup any important data that is already on your Synology Beestation, as the process of installing a new HDD or SSD into the system will result in it replacing the original 4TB HDD. Luckily, there are a couple of great options for backing up your data for restoration when your new HDD/SSD is up and running. The most extensive (and large) one that will ultimately save you time later re-creating shares and folder structure is using the system backup in the System Configuration menu. This allows you to create a full system backup to either the Synology C2 Cloud (subscription cloud service, but does include a trial period) or to a connected USB drive. Later in the guide, I will explain how to restore a full USB backup.

Alternatively, if you are not especially fussed about the system configuration and want a more file/folder-specific backup that only backs up the core/important data (ie you don’t have/want a 4TB backup, but just want some select files/folders), you can use the USB Backup or Cloud Backup options in Beefiles. These are chiefly designed to backup an area of storage from a 3rd Party Cloud (Google Drive, Dropbox or OneDrive) or USB with a specific BeeFiles Folder (you can create multiple). This also has the feature of ensuring the data is 2 way synchronized, which means you CAN use this to copy data form the NAS to the Cloud/USB automatically.

Personally, I would recommend using the System level backup if you can ensure you have a large enough C2 Storage/USB. But also, you should have at least TWO copies of your data, as the system level backup will be in a Synology BSM/Beestation format and will only work in another Beestation system – it won’t be visible via a traditional DAS/Direct connect method.

The last thing to discuss before we begin the Hardware portion of this guide is how you wish to disconnect from the BeeStation system. Installing a new HDD/SSD will also require the system to be formatted. This will happen during the re-initialization when you install a new drive, so you have two options before this. The first is to unlink the Beestation from your Synology Account (as the system is connected via a serial number to your synology account). You will then reconnect with it later on during re-initialization. The main benefit of this method is that Unlinking with the system will KEEP your data on the 4TB hard drive inside – which means if you need to reverse all this (or even just want the old data as a OS-level backup of sorts), this process will be easier and ensure your data is still in place.

Alternatively, you can opt to just fully factory reset the whole device, which will not only disconnect your Synology Account but also delete all the data from the 4TB Hard Drive. After you have chosen the option that suits your needs. Safely power down the device via the GUI or after the system restore. Then you need to leave the system alone for a few minutes (to allow the 4TB HDD to spin down) and then disconnect all USB, Ethernet and power cables.

How To Upgrade Your Beestation HDD – The Start

First thing you need to do is disconnect all ethernet (LAN), power cables and USB devices and give the system sufficient time to allow the HDD inside to spin down. Then carefully turn the device up and have the base vent panel face up. Again, be CAREFUL as this system features a mechanical HDD inside and that can be susceptible to shock/motion damage.

Next you need to slowly and carefully peel back the rubber foot panel located at the base, at the front of the Beestation (i.e the single LED light side). It is held in place with strong adhesive, but you can replace it back after opening the case up later, as the rubber foot sits in a grooved panel and the adhesive has plenty of reuse!

Under the rubber panel are two Phillips/cross-head screws. There are the ONLY external means to open up the enclosure/casing of the BeeStation.

Remove each of these screws (keep them to one side and make sure to remember they are the base screws, as the system has 2 kinds of screws in it’s construction and mixing them up with rip the screw holes to pieces!

Removing these two screws will allow you to apply a small above of pressure to leverage the front panel of the BeeStation NAS to be removed. Important – do this carefully (that word again!) as the entire casing is made up of 2 pieces and it’s super easy to crack it in two!

The top part of the front panel is actually an L-shaped panel that has the fully ventilated dust panel attached. Mkae sure that your ease the panel off carefully enough not to break those 4 hooks at the top, as these are what align the top panel with the rest of the casing.

Slight side note, but for those that care about dust build up on 24×7 systems like the BeeStation, this can be quite useful to perform cleaning. Anyway, carrying on!

Next up os removing the Hard Drive that the Beestation Personal Cloud arrives with. The first thing you need to remove is the 2 smaller screws located around the edge of the casing. DO NOT REMOVE THE 2 LARGER SCREWS IN THE MIDDLE!!! These larger screws hold the HDD in place and you need to do this much later, or else risk the drive moving around during the dismantling.

Each screw will be easy to remove, however there are actually 3 more screw located around the base of the framework. They are tricky to reach, and a longer screwdriver would be recommended, but it can be done with an ordinary 15cm + screwdriver will get the job done.

At the front base area, you can find two black Phillips/cross-head screws that you need to remove. You will need to come at there from a slight angle if you only have a short screwdriver. Important – DO NOT USE AN ELECTRIC/AUTOMATIC SCREWDRIVER!!! Notwithstanding that you will tear the soft screw to pieces, you might cause vibration that will be damaging to the HDD next to the screw! Do it the OLD SKOOL way!

The last screw is much harder to spot and reach, it is located at the bottom-back of the enclosure, on the NON-Motherboard side. You will need to come at it from a slight angle, even with a longer screwdriver. Note, you COULD have removed the top panel attached to the HDD in order to get to the screw a little easier, but I personally would rather the HDD remains in an immobile cage throughout this part of the Beestaion teardown. It’s your call!

That is the last screw that you need to remove and , once it is done, you can begin the removal of the HDD clip/cage.

The HDD Clip/cage will slide out sideways (with a little resistance). BE CAREFUL with the removal of the HDD cage/clips, as the right-hand side will have the controller board (which has the heatsink on top of the CPU, and a bare PCB – which can be super susceptible to static and moisture!

One you have removed the HDD Cage tray, you will now have three components on the table:

Next, removing the Hard Drive from its plastic handles. The HDD is held in place by 4 screws that go directly into the same four screw holes that are usually used by HDD bays on Diskstastion NAS that utilize trays. Ther are four screw in each corner. Important note for later – Make a note of the clips and direction that are on either side of the HDD – whether you want to reassemble this Beestation to the factory build OR you are considering exploring larger HDDs, getting these clips the wrong way around or in the wrong direction will, at best, mean it won’t for back together and you need to redo them, or at WORST, you end up damaging the controller board and casing as you attempt to re-insert the drive.

Each screw uses a counter-sunk system and also arrives with a rubber washer between the screw head and the plastic. This means that you do not need to fully remove the screw, as there is a small % of space left. Regardless, just remove the four screws and each of the side panels should come off very easily.

Once again, make sure you keep track of which panel goes with each side of the HDD – As this will be a right pain during reassembly. An important area of note here is that IF you are considering adding larger/alternative drives to the Beestation and you have your heart set on an SSD, you are going to need a 2.5″ to 3.5″ HDD adapter, as the screw holes that the tray clips AND the PCB Backboard are not available on a 2.5″ SSD. This does also open the door to the potential for a Dual 2.5″ SATA SSD to 3.5″ SATA Adapter case, which would provide the performance benefits of 2x SATA SSD in a RAID 0, or the redundancy benefits of 2x SATA SSDs in a RAID 1, if the case supports internal RAID 0/1). Here are two options:

2.5″ to 3.5″ SATA Adapter ($7.99+) Find on Amazon HERE

SYNOLOGY ASSISTANT NOT CONFIGURED PICTURE Find on Amazon HERE

However, there is considerably more to adding a new hard drive to the BeeStation than just the physical injection!

The one we want to focus on is the HDD tray/cage. Carefully turn it around and lay the drive facedown on the table.

Once the drive is ‘face down’, you need to carefully (yes, THAT word again! Take a drink) remove the two silver screws, Try to touch the blue PCB controller board as little as possible.

Once you have removed those two screws, you need to either slide the controller board away from the Hard drive, or slide the hard drive away. You are doing this to disconnect the SATA connector that is soldered to the controller board. Do NOT leverage the hard drive upwards/downwards, as you run the risk of breaking the connector.

The controller PCB should come away very easily and with little resistance. But before we move forward, it’s worth checking the SATA connector is unharmed.

Place the controller PCB delicately to one side and then get your new storage media drive (your new HDD or SSD) unpacked and ready

Slot the new SATA drive into the PCB via the SATA slot.

Then flip the drive and board over, then screw in the two silver screws to attached the PCB to the HDD. Next, reattached the two tray clips to either side of the new HDD – gain, make sure you select the correct clips for either side and in the correct direction.

Then slot the drive cage back into the base Beestastion black plastic casing. It will be a very specific alignment and you will know it is correct, as the back ports will be completely flush with the rear port cavities on the casing

Screw the 3 base screws in place once again. plus then re-screw the two top placement screws

Then slide back into place the L-shaped top panel. Ensure the 4 hooks at the top slide in neatly and the LED cover at the front/base will meet flush with the other plastic panel.

Re-screw the two silver screws that hold the L-shaped panel in place and then re-attached the rubber foot panel.

Reconnect the local area network/internet connection, as well as the USB drive (if you have a USB backup) and finally the power cable. Then press the power button and now move over to your network connection PC/Mac/Linux desktop and we can start the reinitialization.

Re-Installing BSM on your BeeStation

When the device begins booting, after a few minutes you will hear the system beep. However, instead of heading to the usual Synology Bee Portal site page, you need to open up the Synology Assistant tool. It will scan the local area network and it will find the Synology BeeStation, but it will say that it is in the process of ‘Upgrading’

Now the amount of time this takes will depend on a lot of factors (drive size, download speed if the system is collecting the BSM software online. After some time has passed (10-20 mins tops), the system will reboot ( you will hear the drive spin down and the light on the system will change from a flashing orange light to a slow white light.

1 – UPGRADING

2 – REINITIALIZING

After a few minutes, the synology assistant should now show the message ‘Starting Services’. Don’t forget to click the ‘search’ button at the top left to rescan to see any new changes to the system status.

After a period of time, the system will now show a new message that indicates that the system needs configuration in the synology assistant:

Now you just need to double-click the Beestation listing on the Synology Assistant tool, and it will open up a new tab on your web browser that will guide you through the original BSM installation process, via the Synology Beestation Portal web site:

When you have logged into your Synology Account and have gone through the first 4 steps of the installation, you will be asked if the system is showing an orange light. If it does not, you will need to follow to on-screen restart prompts using the reset button, which will all the system to reboot into ‘find’ mode. Once you have the On-screen serial number prompt and the light on the BeeStation is Solid orange (not flashing) you can go through the usual system setup prompts and connect the BeeStation with your Synology account as normal and log in as you would have before.

What if my Synology BeeStation does not boot into the usual installer?

There IS a chance that your BeeStation will instead display a message saying ‘Not Configured’ upon the first power on after installing your new drive, typically caused by a lack of facility to download the latest firmware (i.e the network connection is not present or restricted on your network). This will result in the system booting into a similar system setup window as found on the Synology Diskstation/DSM devices.

If this occurs, double-click the BeeStation listing on the Synology Assistant tool, and it will open a new tab on your web browser that shows the manual installation steps for BSM on your BeeStation system via the LAN. Just follow the steps on the screen to select the downloaded BSM image you have on your PC/Mac machine, as well as begin the installation to the new HDD/SSD – This will wipe the contents of the drive, but that is normal and you should be using a new/blank drive anyway.

This will install the latest BSM software and the system will restart after 10 mins and you can follow the steps outlined in the previous section to setup the Beestation with your new HDD/SSD for the first time.

How to Restore Your Data to the Upgraded Drive BeeStation?

Now that your BeeStation is up and running, with your new HDD/SSD, you might have a backup of your data on USB or on the Cloud that you want to restore. If you want to use the BeeFiles Backup services for USB/Cloud, you can do this easily with the options in the BeeFiles tool and your cloud sync or USB that you created earlier can be re-connected and the data will be sent back to the Beestation. However, if you have opted to do the system-wide backup in the System settings menu, you will need to head in the system config page and select the Restore Tab on the left hand side of the page:

Next, select the Restore option, ensuring that you either have the USB Backup drive you used connected to the BeeStation system, or you have established a connection with your appropriate Synology C2 account.

Next, you need to go through the list of Backup Images (if you have multiple) and select the appropriate system backup image you want Then you need to select the backup and proceed with restoring this system image

It is worth noting that this process can take a great deal of time (depending on the size of the backup, whether it is cloud/local based and the filled % of the capacity that back was of the original 4TB drive. In my tests, it took 35 mins to restore the system that had 300-400GB of data – it is a slow by methodical process.

Once that is done, the system will reboot and when it has finished, you will need to re-enter and connect your Synology Account. After you log back into the system, you can go into the system setting and BeeFiles again, and you will see that not only is all the data restored, but also that the Synology BSM software has resized the partition to ensure that you are not losing any of the extra space that is available on your new possibly larger HDD (i.e it does not reinstall the 4TB system image, then ignore the extra HDD space – it expands the volume to the full available space of the drive)

And there you go! You have now installed a new HDD or SSD in your Synology BeeStation. REMEMBER, this is NOT authorized by Synology as use for the BeeStation system and will result in the brand not supporting you in the event of issues encountered as a result of installing non-recommended configurations such as this. The Beestation is a simplified cloud alternative to Synology DSM systems. If you want to experiment with more complex configurations, larger storage and faster systems, you should look at the Synology Rackstation and Diskstation systems.

---

I hope you enjoyed this guide and found in useful/informative! REMEMBER, I did this to show you what the inside of your BeeStation Personal Cloud looks like, so YOU DON’T HAVE TO! If you have any further questions, you can reach out to me on robbie ( at ) nascompares.com, or use our free advice section located on the right hand side of the page. Alternatively, you can reach us on our Discord HERE, our community forum HERE, or for faster and more personal support over on KoFi Commissions HERE. If you use and/or share the content of this guide online, please help us spread awareness of our platform and the work we do by backlinking us appropriately! Thanks for reading!

---

Synology BeeStation Personal Cloud Review – Quick Conclusion

READ THE FULL BeeStation Review HERE

Synology has clearly done their homework on the development and presentation of the BeeStation private cloud. They are targeting a whole new audience with this system, and therefore, criticisms based on experiences with their other hardware are likely to fall on deaf ears. The BeeStation is probably one of the best middle grounds I have ever seen between an easy-to-use and exceptionally easy-to-set-up private cloud system, while still managing to provide smooth and seamless features for accessing and sharing your private cloud’s storage securely. Looking at this system with a more network-savvy microscope kind of defeats the point, and I’ve tried to be fair in my assessment. The lack of LAN access by default seems a little odd, and launching the BeeStation series in this single-bay, 4TB-only fashion may be a bit of a marketing misstep, but overall, what you’re seeing here is an effectively priced and scaled private cloud system. It’s a fantastic alternative to third-party clouds and existing simplified NAS systems. With many users keeping an eye on their budgets and tightening costs, Synology, known for its premium position in the market, had a challenge scaling down to this kind of user. However, I have to applaud Synology’s R&D for creating a simple and easy-to-use personal cloud solution that still carries a lot of their charm and great software reputation. It may not be as feature-rich as DSM, but BSM does exactly what it says it will do, and I think the target audience it’s designed for will enjoy the BeeStation a great deal!

DEAL WATCH – Is It On Offer Right Now? These Offers are Checked Daily

---

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE

 

Synology CC400W Camera Review

Remember when Synology was only famous for its NAS? Yeah, me neither. Among all the server brands discussed here at NAS Compares, few have created such a diverse portfolio of home and business solutions, covering a wide array of peripherals and accessories, as Synology has. Although their CCTV and security application, Surveillance Station, has been available on their NAS devices for decades, it’s only in the past few years that we’ve seen the brand introduce their own range of surveillance cameras. The new CC400W is the latest addition to their lineup and, although it might look arguably less enterprise-grade compared to the BC500 and TC500 POE high-protection models, the CC400W doesn’t seem to be a slouch either! Targeting indoor use, this multi-surface deployable camera comes with impressively sleek integration with Synology Surveillance Station, no need for a camera license, industry-approved encryption, and wireless connectivity. Indeed, this was the kind of camera I hoped Synology would release in the first phase of their product series launch. Still, better late than never! Today, we’re going to review the new CC400W surveillance camera from Synology NAS and help you decide whether you can trust it with the security of your data and assets!

Note – Video Review Available NOW on YouTube HERE

Synology CC400W Camera Review – Quick Conclusion

The Synology CC400W, when viewed in isolation, stands out as a slightly above-average surveillance camera. It may not be at the cutting edge of technology, but it doesn’t aspire to be. Instead, Synology is focusing on expanding its camera lineup to complement its well-established surveillance NAS platform, aiming to offer robust and seamlessly integrated products rather than chasing the latest trends. The commitment to ensuring compatibility with third-party cameras while expanding its own range, including the CC400W, BC500, and TC500, is a smart move. It appeals to users seeking a unified first-party surveillance solution that minimizes compatibility issues and security vulnerabilities. One of the CC400W’s strengths is its honesty about capabilities, a refreshing approach in a market often dominated by overhyped claims. This camera clearly delineates its role in the surveillance setup, highlighting a balanced workload between the camera and the Synology NAS. This straightforward integration is likely to attract users looking for a hassle-free surveillance solution. The camera’s enhanced security features, compliance with US certifications, and the absence of a requirement for a surveillance camera license further contribute to its appeal as a reliable, if not revolutionary, product designed for long-term use.

However, there are aspects of the CC400W that could be improved. Given its exclusive design for use with Synology systems and services, the absence of an included SD card at its price point is a notable oversight. Additionally, a two-year warranty feels somewhat limited, especially considering the camera’s likely deployment in business settings for five to ten years, exclusively within Synology’s ecosystem. Moreover, there seems to be a gap in understanding among users regarding the camera’s object detection capabilities versus object recognition and analysis—a distinction Synology could clarify more effectively. Despite these drawbacks, for those looking to expand their Synology surveillance setup without the complexities of camera licenses, desiring quick setup and integration under a single brand, the CC400W confidently meets these needs.

DEAL WATCH – Is It On Offer Right Now?

---

Synology CC400W Camera Review – Presentation

Much like the other cameras in Synology’s lineup, the Synology CC400W arrives in a pleasingly aesthetic external package. Considering that 90% of other surveillance cameras on the market, whether for NVR or DVR systems, tend to arrive in plain, brown packaging with little fanfare, Synology deserves a nod here for their continued effort in the presentation of their solutions. The box sides, adorned with specific information relating to the camera’s specifications and capabilities, represent a step above the usual plain, brown, branded box design afforded to other cameras in the market.

Upon opening the retail package, the camera and accessories are all neatly laid out in individual quadrants. As this is a wireless camera, the range of accessories was always expected to be somewhat limited. Nevertheless, everything is presented very well, and each component bears the Synology branding. It also appears that the majority of the packaging materials are fully recyclable.

Alongside the CC400W itself, the camera comes with a remarkably compact PSU. Designed for exceptionally low power consumption, the diminutive five-watt power adapter reflects this. Furthermore, this adapter connects via a USB Type-C interface, meaning you’re not solely reliant on Synology’s own PSU.

The option to purchase much longer USB Type-C extension cables facilitates greater deployment distance from a power outlet. Additionally, with the right arrangement of five-watt external batteries and solar panels, the feasibility of deploying this camera via solar power is clear, as long as a USB-connected battery point is included in the setup.

While Synology doesn’t directly support this, and the CC400W doesn’t come with its own power bank for USB solar panel support, this does highlight the camera’s low power requirement.

The rest of the accessories are quite standard, including warranty information, first-time setup guidance, details on using the wall bracket and fixings, and instructions for attaching the camera. That’s about it, which is perfectly adequate for this kind of camera.

Anything more could have been unnecessary and potentially wasteful. However, I am a bit disappointed that Synology does not include an SD card of any capacity with these cameras at this price point, given the affordability of SD cards and their utility in Surveillance Station.

Additionally, it seems slightly unfair of Synology to only provide this camera with a 2-year manufacturer’s warranty when their other cameras come with a 3-year warranty. There’s an argument that those cameras were designed for higher outdoor durability and, with POE support in previous releases, they have fewer potential failure points. However, even though the CC400W isn’t exactly a budget camera, for its price point and intended use, it’s surprising that Synology didn’t offer a three-year warranty as they did with other camera releases. Nonetheless, the Surveillance Station software receives effective lifetime support on Synology NAS systems, so there’s no limitation in terms of security updates and feature enhancements.

Overall, the CC400W presents itself as a quite pleasing and well-packaged kit, a cut above many other supported ONVIF cameras used with Surveillance Station, yet not exactly a game-changer. My concerns regarding the lack of an included SD card and the 2-year warranty aside (considering that the majority of budget cameras barely come with a one-year warranty), I’m satisfied with what I find here. Now, let’s focus on the design of the new CC400W camera.

Synology CC400W Camera Review – Design

The Synology CC400W Camera is equipped with a 2.12 mm lens, designed to capture a broad field of view with its 125° horizontal, 72° vertical, and 145° diagonal viewing angles. This wide-angle lens ensures comprehensive coverage of the monitored area, making it ideal for various indoor settings where maximizing the field of view is essential for effective surveillance. The lens’s design aims to provide clear and detailed images across a wide area, enhancing the camera’s utility in security applications.

With an aperture of F2.0, the lens of the Synology CC400W allows for considerable light intake, contributing to the camera’s ability to produce crisp images even in lower light conditions. This feature is particularly beneficial for surveillance in environments with varying lighting, ensuring consistent video quality throughout the day and into the night. The effective aperture supports the camera’s high-resolution HDR video capability, enabling it to capture high-quality footage with balanced exposure in scenes with contrasting light and shadow.

The camera’s lens supports night vision capabilities, utilizing high power infrared LED to illuminate up to 10 meters away. This ensures that the Synology CC400W can provide clear video surveillance in complete darkness, extending its monitoring capabilities to 24/7 operation. The lens, in conjunction with the camera’s infrared capabilities, plays a crucial role in achieving effective night vision, making the CC400W a reliable choice for continuous surveillance needs, regardless of the time of day.

The Synology CC400W Camera not only records live audio as part of its surveillance footage but also allows for the output of custom alarms or direct voice communications through Synology Surveillance Station client services as needed. This functionality is enhanced by an audio sensor that can notify the surveillance setup of noise levels, which can be set permanently or according to a schedule, to preemptively warn of potential intruders. These audio detection alerts, along with physical tampering alerts, add valuable features to the camera’s capabilities, requiring a modern camera for smooth operation. Synology has commendably integrated these services into the camera, reducing reliance on the Synology NAS system to handle all the work.

Underneath a rubber panel at the base of the camera lies a reset button and, more importantly, an SD card slot. While SD card slots are not a novel feature in network cameras, their utility with third-party cameras in Synology’s Surveillance Station is notably limited. However, the SD card slot in the Synology CC400W can be fully utilized for edge recording. This means that in the event of a disconnection from the Synology NAS—due to network failure or system compromise—the camera will continue recording and managing alerts locally on the SD card. Once the connection is restored, it will sync the recordings and alerts back to the NAS. This feature, combined with the Synology C2 cloud recording service, ensures comprehensive protection across various failure scenarios and security threats.

The camera’s base hinge features a 360-degree rotating metal arm, allowing for adjustment across three axes. The base itself is magnetic, simplifying the installation process and significantly easing deployment. Despite its ease of installation and low power consumption, it’s essential to remember this camera still requires a power source, necessitating a USB Type-C outlet or the use of the included five-watt USB PSU. The magnetic base is a notably convenient feature, uncommon in surveillance cameras, and the locking mechanism for the aperture/hinges ensures once positioned, the camera remains securely in place.

The Synology CC400W Camera features an IP65 rating, indicating a high level of protection against dust ingress and water jets, although slightly lower than the BC500 and TC500 models. This rating suggests the camera is not designed for exposure to heavy rain or outdoor elements, emphasizing its suitability for indoor or sheltered outdoor use.

In the realm of government surveillance system installations within the United States, professionals are required to navigate with precision to adhere to specific legal requirements, notably under section 889 of the 2019 National Defense Authorization Act (NDAA). This legislation outlines stringent criteria for video surveillance equipment intended for use on U.S. government properties, prohibiting equipment and services from certain companies deemed a national security risk, including Huawei Technologies Company, ZTE Corporation, Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, and Dahua Technology Company. This mandate ensures that only compliant products, which do not incorporate components from these restricted entities, are utilized in sensitive government-related surveillance operations. For security professionals and installers, understanding and adhering to these regulations is crucial when selecting equipment for government projects to ensure legal compliance and maintain national security integrity.

Furthermore, the Trade Agreements Act (TAA) complements the NDAA by enforcing standards for products used in government contracts, requiring them to be produced in the United States or other approved countries. The compliance of security products with both NDAA and TAA is a critical factor for businesses and contractors engaged in federal government projects, signifying that the equipment does not contain components from restricted companies and adheres to trade regulations. The Synology CC400W, with its NDAA and TAA certification, stands as a prime example of a compliant surveillance camera suitable for use in government-related installations. This certification not only ensures adherence to U.S. laws but also positions the CC400W as a viable option for security professionals seeking to fulfill government contracts with confidence in the legality and security of their surveillance technology choices. So, unsurprisingly, the camera’s benefits of NDAA and TAA certification, make it a compliant choice for businesses, especially those dealing with U.S. government contracts. These certifications are crucial in the wake of security concerns and trade disputes, as they ensure the camera meets strict standards required for use in sensitive environments. The CC400W strikes a balance by offering compatibility with Synology’s platform, compliance with important regulatory standards, and moderate affordability for business users.

The design and production quality of the Synology CC400W Camera are commendable. While it’s still a surveillance camera and praise must be relative, it stands out as a compact and easily deployable option for business use. Some might note the absence of an included SD card or a solar panel with an internal battery system as drawbacks, but given its intended use case, these are minor concerns. The focus now shifts to how this camera integrates into your surveillance setup.

Synology CC400W Camera Review – Network Connectivity

The Synology CC400W is tailored specifically for integration with Synology NAS systems, eschewing support for use with third-party NVRs or NAS devices. It boasts wireless network connectivity, supporting dual-band Wi-Fi frequencies of 2.4 GHz and 5 GHz, providing a reliable and sufficient range for camera deployment and the maintenance of stable video streams. While recent trends have introduced Wi-Fi 6 surveillance cameras featuring the 6 GHz band, such enhancements are deemed somewhat superfluous in the surveillance domain, where ensuring ample coverage distance remains the primary objective.

Lacking a physical Ethernet connection, the CC400W might deter users seeking a hybrid deployment approach. However, its integration with Synology software streamlines the setup process. Notably, the camera does not require a Synology surveillance camera license for operation in Surveillance Station, allowing users to conserve the two licenses typically included with most Synology NAS systems. This camera’s compatibility facilitates seamless firmware updates and direct control via the Surveillance Station GUI, simplifying long-term management and maintenance compared to third-party camera solutions.

Deployment of the CC400W requires it to reside within the same local area network as the Synology NAS it is configured to record to. This setup may necessitate adjustments to existing VLAN configurations, especially in environments with scattered wireless access points. The absence of a wired connection option could pose challenges for some setups. Configuration is streamlined through the DS cam mobile app for Android and iOS, which automatically detects the camera within the local network, eliminating the need for manual setup. This ease of integration underscores the camera’s designed compatibility with Synology’s ecosystem, offering a hassle-free addition to existing surveillance systems.

During practical evaluation, the CC400W’s performance was tested using a $10, 10-meter USB-C extension cable to extend power delivery distance, demonstrating the camera’s low power requirements and flexible deployment potential. The camera maintained high-quality video transmission even when placed 8 meters away from the nearest wireless access point, ensuring desired bitrate and framerate consistency. The ability to integrate and manage live feeds, archival footage, and AI-driven alerts within Surveillance Station’s monitoring center highlights the CC400W’s seamless operation and contribution to comprehensive surveillance setups, emphasizing its role within Synology’s networked ecosystem.

Synology CC400W Camera Review – Surveillance Station Software Support

Reviewing the Synology CC400W camera without addressing the Synology Surveillance Station software would be incomplete. This camera essentially relies on a Synology NAS and its integrated surveillance software to function. It’s no exaggeration to say that for many, the Surveillance Station software—bundled with every Synology NAS, regardless of size—justifies the entire cost of the system. Offering an enterprise-grade surveillance platform that is both user-friendly and rich in features, Surveillance Station has evolved from a niche add-on to one of Synology’s primary selling points. The software’s accessibility, client support, security, and comprehensive feature set make it a standout, regardless of whether it’s paired with a Synology CC400W camera or a third-party option. To delve into a detailed review of Surveillance Station would significantly extend the length of this article. Fortunately, a comprehensive review of Synology Surveillance Station 9.1 has been previously conducted, available below, a full review on YouTube. This review covers the wide array of features and benefits offered by this surveillance software when used in conjunction with a Synology camera. The Synology CC400W camera is specifically engineered to provide optimal performance with Synology Surveillance Station, the current version being 9.1.1. The camera’s integration with Surveillance Station offers advanced functionality that outshines the features provided by third-party and non-edge-AI-recognition cameras.

The CC400W camera, when paired with Surveillance Station, supports a plethora of services that transform your security experience. It provides access to live camera feed (monitoring center), which can be scaled to accommodate several cameras on screen simultaneously. You can also view live feeds and previous recordings side-by-side on the software.

Additionally, the Surveillance Station allows for privacy mask and watermark applications on the feed.

It also supports the upload of eMaps and integrates with third-party mapping services like Google Maps and OpenMaps.

Surveillance Station isn’t limited to camera support. It also provides control for IP speakers, door controls, and I/O supported peripherals. Users can access the system swiftly and intuitively via a mobile app, and even use their mobile as another surveillance camera feed with Synology Live Cam. Alerts and push notifications can be scheduled for specific events, and the system generates downloadable analytical reports.

The Surveillance Station further extends its functionality with an array of additional add-ons. These range from YouTube Live Streaming and video integrity tools to transaction checking and IFTTT/Webhook services.

It also offers features like motion detection, missing object detection, idle zone monitoring, and foreign object area tagging. Access to the Surveillance Station is conveniently provided through web browsers, desktop clients, and mobile clients, either over the local network or remotely.

One of the key features is the Smart Lapse creation, which lets you truncate long periods of recording into speedy sequences. For example, you can turn a full day’s footage into a few minutes for quick scanning. It also supports cloud recording with Synology C2 Surveillance (available with a free trial, then on a subscription basis).

The Surveillance Station also offers a Home Mode, which allows automated camera schedules to kick in when a defined user exits or enters the premises using WiFi links. More details on these features can be found in our review of Synology Surveillance Station 9.1 on our YouTube channel:

The CC400W camera, paired with Surveillance Station, supports sophisticated AI detection techniques like people detection, vehicle detection, intrusion detection, crowd detection, and loitering detection. It also offers a Smart Search feature that lets you search a predefined area of a recorded feed for specific incidents.

Vehicle Detection – Similar to its capability for human detection, the CC400W camera extends its intelligent recognition to vehicles as well. This feature proves particularly useful in situations when the premises are closed, and an unexpected vehicle enters the vicinity. The surveillance system can be programmed to provide ‘out of hours’ alerts, notifying owners whenever vehicles approach their premises during closed or off hours. It’s an excellent way to ensure the security of your property when you’re not physically present.

Intrusion Detection – The CC400W camera takes intrusion detection a notch higher with its advanced features. Users can draw lines on the feed that can have multiple bend or break points, marking out specific areas as off-limits. This allows the system to monitor if people or vehicles cross into these forbidden zones. Thanks to edge AI recognition, you can customize this feature to fit your needs—for example, allowing an area to be entered by people but not vehicles or vice versa. This level of customization helps create ‘no go’ zones at specific times, further enhancing the security of your premises.

Crowd Detection – The CC400W camera’s recognition capabilities extend beyond just humans and vehicles. It also offers nuanced crowd detection. For instance, the system could be programmed to ignore one or two people in a predefined area. However, if that number increases to five or six, it could trigger an alert. This crowd detection feature enables you to set thresholds for alerts based on the number of people in a particular area, ensuring you’re notified only when necessary.

Loitering Detection – Similar to crowd detection, loitering detection is another impressive feature of the CC400W camera. This function enables the camera to alert you when an individual or vehicle remains within a predefined area for an unusually long period. People just passing by won’t trigger an alert, but if they loiter around for a while, the system will notify you. This helps you keep an eye on any potential suspicious activity around your premises.

Smart Search – This feature significantly enhances the surveillance process by allowing you to focus on a specific area within recorded feeds. For instance, you can set the system to alert you of any movement, person, or vehicle in a predetermined spot, such as a door, desk, or window. By combining Smart Search with Smart Time Lapse, you can sift through weeks of recordings in a fraction of the time, automatically identifying any noteworthy events in a particular spot. It allows you to retroactively apply advanced surveillance parameters, even if they weren’t set up at the time of recording.

While the CC400W camera is impressive, it’s important to note that it does not support database storage. It cannot store a reference of specific people or faces and vehicle registrations for future comparison when they appear in the feed, allowing alerts to be scaled accordingly. To access this kind of functionality, a DVA system such as the Synology DVA1622 2-Bay or DVA3221 4 Bay is necessary. Similarly, the CC400W camera cannot keep numerical track of the number of people or objects crossing the set intrusion lines, making it impossible to maintain an accurate count—for instance, knowing who is in or out during a fire alarm. Thus, while the CC400W camera provides a range of advanced features, it has its limitations.

Recordings are sent via HTTPS/SRTP encryption to the NAS, are encrypted when recorded to the local memory card, and remain encrypted when backed up on the Surveillance C2 cloud service. Furthermore, the previously mentioned Synology CC400W camera is NDAA and TAA compliant, which gives it a distinct edge over lower-priced Chinese cameras. In conclusion, while the CC400W Camera does not match up to more expensive Deep Video Analysis systems like the DVA162/DVA3221, its exclusive features and exemption from surveillance licenses make it a compelling choice.

Surveillance Station boasts a vast array of features and services, many of which are either managed by the system itself or utilized in collaboration with the security camera. The integration of AI services with the CC400W camera opens up additional possibilities, although these are somewhat limited when compared to the capabilities unlocked with Synology’s DVA (Deep Video Analysis) NAS units. The CC400W can recognize humans and vehicles, create paths and exclusion zones, and assist in AI-driven searches to accelerate archive retrievals. However, lacking an onboard AI database means it cannot perform more complex AI tasks that require immediate access to an extensive, regularly updated system database—such as people counting, license plate recognition, and facial recognition. These advanced functionalities necessitate a DVA NAS and are crucial to consider when setting up a surveillance system aimed at recognition or identification, as these tasks require different system resources and camera capabilities.

What IS and ISN’T Possible with the Synology Camera AI-Assisted Services?

Now, despite the Synology CC400W, BC500 and TC500 Surveillance Cameras arriving with onboard hardware for AI-powered recognition tasks, it is worth highlighting that using them is NOT the same as using the Deep Video Analysis (DVA) series of NAS servers in Synology’s portfolio. These operations are managed from inside the camera and the alerts are handled and actioned by the NAS after the camera sends the appropriate alert – and these cameras so NOT have the same level of hardware as the DVA1622 and DVA3221 inside each of them! Additionally, whereas the DVA series manages multiple tasks internally from multiple cameras, only using the camera hardware as a life ‘feed’, these cameras cannot run deeper AI tasks that involve counting, internal database management and keeping records of AI referral data internally – they do not have the storage or processing power for that. So more complex people counting and specific facial recognition will not be immediately available to your PLUS series Diskstation, just because you are using the BC500, CC400W and/or TC500. Here is a breakdown of the services available to users with either Synology Cameras or a Synology DVA NAS:

AI Service	Case Use	BC500 & TC500	DVA1622 & DVA3221
People / Vehicle/Loitering Detection	Reduce false alarm and protect against loitering	YES	YES
Crowd Detection	Monitor public safety or quality of service	YES	YES
Intrusion Detection	Protect perimeter and restricted area	YES	YES
Instant Search	Investigate incidents quickly after they happen	YES	NO
People/Vehicle Counting	Calculate occupancy in shops, food courts, or parking lots with aggregated counting of people and vehicles entering and leaving	NO	YES
Face Recognition	Automate personnel identification and prevent unauthorized access	NO	YES
License Plate Recognition	Identify license plates and set up triggers based on configurable allow or block lists	NO	YES

If you are unaware of the Synology Deep Video Analysis NAS system, you can find out more about it in the video reviews of the hardware and software below from our YouTube channel:

Synology CC400W Camera Review – Conclusion

The Synology CC400W, when viewed in isolation, stands out as a slightly above-average surveillance camera. It may not be at the cutting edge of technology, but it doesn’t aspire to be. Instead, Synology is focusing on expanding its camera lineup to complement its well-established surveillance NAS platform, aiming to offer robust and seamlessly integrated products rather than chasing the latest trends. The commitment to ensuring compatibility with third-party cameras while expanding its own range, including the CC400W, BC500, and TC500, is a smart move. It appeals to users seeking a unified first-party surveillance solution that minimizes compatibility issues and security vulnerabilities.

One of the CC400W’s strengths is its honesty about capabilities, a refreshing approach in a market often dominated by overhyped claims. This camera clearly delineates its role in the surveillance setup, highlighting a balanced workload between the camera and the Synology NAS. This straightforward integration is likely to attract users looking for a hassle-free surveillance solution. The camera’s enhanced security features, compliance with US certifications, and the absence of a requirement for a surveillance camera license further contribute to its appeal as a reliable, if not revolutionary, product designed for long-term use.

However, there are aspects of the CC400W that could be improved. Given its exclusive design for use with Synology systems and services, the absence of an included SD card at its price point is a notable oversight. Additionally, a two-year warranty feels somewhat limited, especially considering the camera’s likely deployment in business settings for five to ten years, exclusively within Synology’s ecosystem. Moreover, there seems to be a gap in understanding among users regarding the camera’s object detection capabilities versus object recognition and analysis—a distinction Synology could clarify more effectively. Despite these drawbacks, for those looking to expand their Synology surveillance setup without the complexities of camera licenses, desiring quick setup and integration under a single brand, the CC400W confidently meets these needs.

 

 

Synology DS423+ vs DS923+ NAS – Which Should You Buy

Buying your first network-attached storage device can be really intimidating! If you have spent the better part of a decade storing your personal or business data on public cloud services or in a drawer full of USB drives, but have now taken the grown-up decision to go ahead and migrate over to your own private network-attached storage (NAS). You might have done this for reasons of cost, centralization or perhaps for security, whatever the reason for your data migration, there is simply no denying that the world of NAS can be a fraction complex and confusing early doors. Like any kind of modern computer appliance, you want to make sure you buy right the first time and when it comes to choosing between two of the latest generations of Synology NAS devices, these two incredibly similar four-bay devices might be two of the most different solutions I have ever compared. The Synology DS423+ is a home and small business-focused compact NAS designed to leverage an affordable price point between reasonable hardware and reasonable software and abilities. The slightly older Synology DS923+ (by 6+ months), on the other hand, has much of a high and even in some places entry enterprise-level focus about its architecture and is needless to say the more expensive of the two. Nevertheless, both of these Synology NAS devices can be picked up for around $450 to $600 (without drives), the contrast between their pricing, are actually very different beasts. Therefore, for users that don’t quite know their AMD embedded from their Celeron integrated processors, or who aren’t sure of the benefits that ECC can bring, today I want to compare the Synology DS423+ and Synology DS923+ and help you decide which one best deserves your data!

Just before we get into the meat and potatoes of this comparison, it is worth highlighting that regardless of whether you buy the Synology DS923+ or DS423+, you are guaranteed to get a system that can perform all of the following:

• Both units feature x86 processors, which allow a wide degree of app/services to run well and are a good price vs hardware balance
• Both the DS923+ and DS423+ are constructed of plastic desktop compact chassis, thereby reducing power consumption, noise and heat generated
• Both can Stream 1080p HD or 4K media, with superior performance natively and mid-range performance in Plex
• Both the Synology DS923+ and DS423+ NAS support AI-supported photo and ‘thing’ recognition supported to a very high degree from the free branded software included
• For Business users who currently enjoy the use of Google Workspace or Office 365, both of these NAS provide excellent means to backup your mass cloud accounts (as well as natively sync, dupe and configure rules on the fly)
• Both the DS423+ NAS and DS923+ NAS support snapshots, for more incremental and version protecting failsafe in efforts to protect you from Malware and Ransomware attacks, by allowing multi-versioning storage history to browse through and restore
• Both units are DLNA certified so can be accessed, browsed and played from by popular DLNA devices, such as Amazon Firestick, Alexa, Google Home Chromecast, Apple TV, Bose, Sonos, iPads, etc, as well as connectivity between these platforms with IFTTT
• Both are multi-bay, RAID enabled devices NAS devices that support JBOD, RAID 0, RAID 1, RAID 5, RAID 6 and RAID 10 (as well as Synology Hybrid RAID too for their Plus series range), though it is worth highlighting the DS923+ is the only one that supports an expansion and therefore also can support RAID 5, RAID 6, RAID 10 and SHR-2 over an expansion (more on that later)
• Both devices run on their own proprietary operating system that can be accessed remotely or locally. These include regular updates to the firmware, security patches, applications and more. Ranging from multimedia, home and multi-tiered backup applications, to more business end tools such as Surveillance software, Virtual Machine deployment and business-class backup and synchronization tools.
• Both the DS423+ and DS923+ use and can be accessed equally by a multitude of mobile applications such as DS File, DS Video, DS Photo, DSCam and DS Music that are created by and constantly improved by Synology.
• Both NAS are completely compatible with Windows, Android and Mac systems, as well as acting as a bring between software platforms to share and distribute files for migration and file sync]
• Both units can be used as a mail and/or business servers, providing excellent 3rd party CRM and first-party CMS systems, as well as the fantastic Synology collaboration Suite of applications Chat, Drive, Mail, Calendar, Office and Active Backup Suite
• Both systems will support DSM 7.1 or DSM 7.2 out the box, as well as support software updates (security and feature) for many years moving forward
• Both systems support the Synology Surveillance Station applications, support numerous cameras and arrive with 2 camera licenses with your purchase

But you didn’t come to this comparison page to find out what they had in common, you wanted to know what makes them different and which one best suits your needs, so let’s crack on with this comparison.

Synology DS423+ vs DS923+ NAS – Price and Value

Now, for those of you that are keeping a very close eye on the budget, it will already be clear to you that the Synology DS423+ is the lower-priced NAS of the two, by quite a considerable margin! Arriving, depending on where you are in the world, for around $449 to $499, it will immediately look more appealing to those on a tight budget when compared against the $549 to $599 of the DS923+. And that is before you’ve gone ahead and purchased any storage media too, so that’s saving of $100 to $150 could go a long way to further bolstering your network-attached storage setup. So, if the most important thing to you right now is remaining within a tight budget, then it might be worth seeing to read the rest of this article as when comparing DS423+ and DS923+, we have to look considerably more at the subject of value, not price. Price. Both of these devices arrive with the same software, Synology DSM 7.2, as well as both systems being two drive NAS solutions that support nearly identical ranges of storage media too, but more on that later. In terms of physical size, the range of components, they are pretty darn similar at a casual glance. However, it is in terms of the individual hardware components and scalability where the Synology DS923+ shows its worth, which we will cover shortly in the hardware section. But at least in terms of numerical value, the Synology DS423+ carries the lead. However, the reality isn’t quite that simple:

This is because the Synology DS923+ was released approx than half a year earlier than the DS423+ (Nov 2022 vs April 2023) and because of its wider availability and longer presence in the market, it has been featured in numerous special offers throughout that time. We saw this near $500 NAS on a few considerably impressive special offers throughout Amazon Prime day and other smaller eShop-specific events. So, yes, the DS423+ is the lower-priced NAS of the two, but do make a point of checking your local online retailer to see if the DS923+ is on special offer right now!

Synology DS423+ vs DS923+ NAS – Hardware and Connections

The hardware architecture of the DS423+ and DS923+ clearly have two very different target audiences in mind. The DS423+ has more of a home and multimedia feel about it, while the DS923+ feels substantially more like a business solution. This is reflected in numerous areas such as the distinct differences in CPU, memory specifications, and potential for growth. Even if you were to take into account the affordability of the DS423+, it has to be said that in the majority of hardware available, the DS923+ is significantly more powerful and scalable in practically every way. Here is a brief summary of the key hardware highlights of either system, side-by-side:

Synology DS423+ vs DS923+ NAS Hardware Comparison
Synology NAS
Amazon Price:	$479 (Amazon 25/02/24)	$599 (Amazon 25/02/24)
Processor model	Intel Celeron J4125 (2019 Gen)	AMD Ryzen R1600 (2020 Gen)
processor architecture	64-bit	64-bit
processor clock	4-core 2.0 (base frequency) / 2.7 (burst frequency) GHz	2-core 2.6 (base frequency) / 3.1 (max overclock) GHz
Integrated Graphics	Yes (250-750Mhz)	No
Hardware encryption engine (AES-NI)	Yes	Yes
system memory	2 GB DDR4 non-ECC	4 GB DDR4 ECC
Pre-installed memory modules	Yes	4GB (4GB x 1) via SODIMM
Total number of memory slots	1	2
Maximum memory capacity	6 GB (2 GB + 4 GB)	32GB (16GB x 2)
The maximum number of disk slots for an expansion unit	N/A	7 (DX517 x 1)
M.2 drive bay	N/A	2 (NVMe, PCIe 3×1)
Compatible Disk Type	3.5″ SATA HDD 2.5″ SATA SSD	3.5″ SATA HDD 2.5″ SATA SSD M.2 2280 NVMe SSD
Disk hot-plug support*	Yes	Yes

So first and foremost, we need to discuss the main differences between the CPUs available here. The Intel Celeron found inside the DS423+ is a four-core, four-thread processor with a clock speed of 2.0 GHz that can be burst to 2.7 GHz when needed. However, despite the age of this CPU, which was released towards the end of 2019, it is the integrated graphics of this processor that gives it a slight edge for some users in terms of NAS deployment- especially those looking at multimedia use for their system. For users that are looking at the manipulation of graphical data, or more commonly are using the NAS as a multimedia server and wish to convert dense multimedia into something more manageable locally (for example, converting a dense 4K file into a much smaller and portable version to watch on the phone whilst commuting to work, on the fly), integrated graphics allow the NAS to perform this task with much lower overall resource consumption.

Thanks to it having a more specialized tool to get this job done. The embedded Ryzen R1600 processor on the other hand, lacks the integrated graphics and is a dual-core processor instead of a quad-core. However, it substantially makes up for this by being a much more powerful dual-core processor, with four threads that allow the system to assign system resources in a similar way to that of having multiple cores. Equally, the clock speed is noticeably higher here with the DS923+ CPU having a 2.6 GHz base power that can be burst when needed to 3.1 GHz. It is true that in cases of graphical manipulation or multimedia conversion, the AMD CPU here will be far less efficient and capable. However, in practically every other way, it is superior to that of the J4125 inside the DS423+. And if you are more concerned with traditional file transfer speeds internally and externally, the DS923+ will comfortably be the better-performing NAS.

 

The CPU choices in the DS423+ and DS923+ also result in very different memory architectures in each device, which will undoubtedly result in different scalability in the long term. The DS423+ arrives with 2GB of 2666Mhz memory, soldered to the main controller board, which can be further expanded via an available SODIMM memory slot to 6 GB total. This may be a little disheartening when you find out that the CPU here is actually capable of supporting 8 GB maximum memory. However, due to that initial 2GB memory being fixed internally, you cannot officially exceed 6 GB physically. This shortfall is considerably magnified when you bring into comparison the DS723’s memory structure. It arrives with 4GB of DDR4 3200Mhz memory which can be expanded to a whopping 32 GB total across two available SODIMM slots. Additionally, the system arrives with error-correcting code (ECC) memory, which ensures that data that passes through the memory during write operations will have its integrity checked by a separate module on the memory of the system. If any irregularities or inconsistencies are spotted, that data will be repaired. This goes a long way to reassure any doubts around the integrity of long-term archival data and susceptibility to things like bit rot. This is one of the main reasons why the DS923+ is considered much more of a business solution overall.

Much like the memory choices by Synology in these two NAS devices, the ports and connections of them both are similar, but one is definitely more scalable than the other. Both systems arrive with standard gigabit ethernet connectivity, with two available ports that each will provide up to a maximum 109 megabytes per second. Both systems also arrive with USB 3 connectivity, but it is only 5GB gen 1 USB. However, it is from here onward that the DS723 massively upscales things:

Model ID	Synology DS423+	Synology DS923+
Synology NAS
RJ-45 1GbE LAN port*	2 (Supports Link Aggregation / Failover)	2 (Supports Link Aggregation / Failover)
USB 3.2 Gen 1 port*	2	2
eSATA port	0	1
USB Copy	Yes (inc. Physical Button)	Yes
PCIe expansion	N/A	1 x Gen3 x2 LAN card slot
system fan	92 mm x 92 mm x 2 pcs	92 mm x 92 mm x 2 pcs
fan mode	full speed mode low temperature mode silent mode	full speed mode low temperature mode silent mode
Front panel LED indicators with adjustable brightness	Yes	Yes
Noise value*	19.8dB(A)	22.9 dB(A)
wake on lan	Yes	Yes
Power Supply / Transformer	90W	100W
AC input voltage	100V to 240V AC	100V to 240V AC
current frequency	50/60 Hz, single frequency	50/60 Hz, single frequency
Power consumption	28.3 W (access) 8.45 W (disk hibernation)	35.51 W (access) 11.52 W (disk hibernation)

For a start, the DS923+ features an eSATA external port that is used to connect the official Synology 5-bay expansion device, the DX517. This means that while the DS423+ has a maximum long-term capacity of four SATA drives, the DS923+ allows you to expand your storage down the line by an additional five SATA bays (so 9 Bays total). This can be done gradually and this storage can either mirror the original NAS or extend the storage pool across both devices.

Scalability and expandability do not stop there though, with the DS923+ also having the option to add a network adapter upgrade module (the E10G22-T1-MINI) to increase your network bandwidth to 10GbE. This is going to be incredibly useful for users who plan on taking advantage of SSDs or plan on having a much busier network environment between the NAS and multiple users and tasks at any given time. And it doesn’t stop there! Though BOTH systems also features two SSD bays on its base for installing M.2 2280 SSD modules (which can be used for caching or as raw storage pools, depending on which drive you use), the DS423+ is a Gen 2 PCIe lane system, whilst the DS923+ is a Gen 3 system – resulting in double the bandwidth per lane (ultimately, the difference between 500MB/s max per SSD on the DS423+ and 1,000MB/s on the DS923+). This is a feature that, although growing more common across Synology’s NAS portfolio, it is still unavailable on many of their lower tier/affordable systems (such as the DS224+) and, alongside the lack of storage expansion support, the gen2 speeds on these bays will place limits the storage potential long term on the more affordable NAS.

Finally, we need to discuss storage media compatibility, as this has grown to be another thing that has changed the way in which a user can populate their NAS quite a lot in recent years. On the list of storage media that they are prepared to verify as compatible with their systems. Although technically, one could say that any SATA media drive would be compatible with a SATA NAS, there are still a few incredibly isolated examples of compatibility, durability and stability. Synology requires that all drives need to be officially checked and verified before they’re prepared to add them to their list in order to truly guarantee that a user will get the promised Synology experience from their hardware with that media. As questionable as this might sound, the result is that the list of compatible storage media for both of these devices, despite their incredible similarities, is actually pretty darn different. Take a closer look at the slideshow below of compatible HDDs from WD and Seagate on these two NAS systems (from 21st July 2023) and see if you can spot an odd inconsistency:

In the case of the DS423+, we see a smaller pool of supported storage media, as well as a lower list of larger capacity drives being featured also. The DS923+, on the other hand, seemingly has a larger pool of more high capacity drives added and available to it, as well as a larger range of Synology’s own drives available for use with that system that includes the higher end options in the HAT5300 range. Synology has clearly prioritized higher-end drives for more advanced Synology systems, but for those that like to use their system clearly and rigidly within the defined parameters of a brand to maintain their warranty/guarantee, this is going to be a little disheartening to see the smaller pool of verified compatible storage media on the more affordable NAS solution. This is something that may well change over time as more drives are added to verified compatibility lists, but Synology has not exactly been putting their foot on the gas here. Given how close these two systems have been released side by side and the large disparity between their compatibility lists, I can’t see a huge amount of change happening anytime soon. It is absolutely no surprise that the more expensive Synology NAS has a better degree of hardware options in the long term. Though, it should be highlighted that a lot of the real benefits available in the DS723 are optional extras, long-term scalability and upgrades that are not necessarily available in the default model. It could be very easily argued that you are paying for entry to then pay extra for delivering upgrades, SSD upgrades, storage scalability, and increasing your memory years from now. Nevertheless, the fact that the baseline memory is ECC and the AMD CPU is indeed more powerful in most ways, does make up some of that additional cost and ultimately mean that in terms of hardware and connectivity, the DS923+ is the better of the two.

Synology DS423+ vs DS923+ NAS – Software and Services

At the risk of being incredibly repetitious, both of these devices are remarkably similar in what they can do in Synology’s premium DSM software platform, but the scalability and scope provided by the DS923+ inevitably leads to that more expensive system, ultimately giving you just more resources with which DSM can utilize. In terms of the actual range of applications, services supported on either system and scope for use right out of the box, both the DS423+ and DS923+ have got more than enough to run every single available app and tool available in DSM 7.2. Despite their rather modest scale, both systems can run multiple virtual machines, host a fantastically capable surveillance solution with numerous cameras, both can provide an excellent Plex media server experience (with a slight edge to the DS423+ in terms of conversions and transcoding when needed), and in terms of backups, both systems support the full range of services from Hyper Backup and Active Backup Suite. If you are a small business or just a small group of users who are going to be interacting with either of these NAS units fairly regularly, you’re going to have a largely identical experience in either one of these two systems using the baseline default hardware. However, things will change as soon as you start moving into larger simultaneous access, more high-volume application exchanges between the system and client hardware, and the scope of each one of those individual processes growing over time. In terms of the escalation of accessing the services of DSM and long-term future-proofing of a system running at top speed, despite growing requirements and demands of the system, the DS923+ comfortably wins.

Synology NAS	Synology DS423+	Synology DS923+
Maximum single volume capacity*	108TB	108TB
Maximum number of storage spaces	64	64
M.2 SSD volume support*	Yes	Yes
SSD Read/Write Cache (White Paper)	Yes	Yes
SSD TRIM	Yes	Yes
Support RAID disk array type	Synology Hybrid RAID Basic JBOD RAID 0 RAID 1 RAID 5 RAID 6 RAID 10	Synology Hybrid RAID Basic JBOD RAID 0 RAID 1 RAID 5 RAID 6 RAID 10
file agreement	SMB/AFP/NFS/FTP/WebDAV	SMB/AFP/NFS/FTP/WebDAV
Maximum simultaneous SMB/AFP/FTP connections	500	1000
Maximum number of simultaneous SMB/AFP/FTP connections (with extended memory)	1500	2000
Windows Access Control List (ACL) Integration	Yes	Yes
NFS Kerberos authentication	Yes	Yes
Maximum number of local user accounts	2048	2048
Maximum number of local groups	256	256
Maximum number of shared folders	256	512
Maximum Shared Folder Sync Tasks	8	16
VMware vSphere with VAAI	N/A	Yes
Windows Server 2022	N/A	Yes
Citrix Ready	N/A	Yes
OpenStack	N/A	Yes
Media Server	Yes	Yes
DLNA compatible	Yes	Yes
Synology Photos	Yes	Yes
face recognition	Yes	Yes
Snapshot Replication	Yes	Yes
The maximum number of snapshots supported by a single shared folder	1024	1024
Maximum number of system snapshots	65536	65536
Surveillance Station	Yes	Yes
The maximum number of cameras supported (camera authorization is required)	40 (including 2 sets of free licenses	40 (including 2 sets of free licenses
Frames per second (FPS) (H.264)	1200 FPS @ 720p (1280×720) 800 FPS @ 1080p (1920×1080) 350 FPS @ 3M (2048×1536) 280 FPS @ 5M (2591×1944) 170 FPS @ 4K (3840×2160)	1200 FPS @ 720p (1280×720) 1050 FPS @ 1080p (1920×1080) 600 FPS @ 3M (2048×1536) 360 FPS @ 5M (2591×1944) 200 FPS @ 4K (3840×2160)
Frames per second (FPS) (H.265)	1200 FPS @ 720p (1280×720) 1200 FPS @ 1080p (1920×1080) 600 FPS @ 3M (2048×1536) 480 FPS @ 5M (2591×1944) 200 FPS @ 4K (3840×2160)	1200 FPS @ 720p (1280×720) 1200 FPS @ 1080p (1920×1080) 1000 FPS @ 3M (2048×1536) 600 FPS @ 5M (2591×1944) 300 FPS @ 4K (3840×2160)
Synology Drive	Yes	Yes
Recommended number of clients that can sync simultaneously	350 (the number of devices that can be connected at the same time when the recommended number of stored files is reached)	350 (the number of devices that can be connected at the same time when the recommended number of stored files is reached)
Recommended number of files to store	5,000,000 (Applicable to files indexed or belonging to Synology Drive , files accessed through other protocols, please refer to the file service in the above field)	5,000,000 (Applicable to files indexed or belonging to Synology Drive , files accessed through other protocols, please refer to the file service in the above field)
Synology Office	Yes	Yes
Maximum number of users	1200	1200
Video Station	Yes	Yes
Virtual Machine Manager	Yes	Yes
Recommended number of virtual machines	2 (see more)	4 (see more)
Recommended number of Virtual DSMs (licensing required)	2 (including 1 set of free licenses)	4 (including 1 set of free licenses)
VPN Server	Yes	Yes
Maximum number of connections	40	40
Synology High Availability	Yes	Yes
log center	Yes	Yes
Number of logs received per second	800	800
Backup folders and packages	Yes	Yes
backup the whole system	Yes	Yes
Remark	Full system backup requires DSM 7.2 or later.	Full system backup requires DSM 7.2 or later.
Maximum number of Hybrid Share folders	10	10

Notwithstanding that the system has a much higher clock speed CPU that, despite only being a dual-core processor, features a four thread architecture with DSM, allowing a lot of the spreading of resources normally associated with cores to be made available with vCPU allocation (containers, virtual machines and just natively). Then there is the scope for the larger overall capacity available to be upgraded towards in terms of memory, with the rather modest 6GB of memory on the DS423+ looking quite underwhelming when compared against the whopping 32 GB maximum memory that is scalable on the DS923+. That ultimately adds up to the more expensive NAS system having a better opportunity to grow alongside a more demanding data storage network of connected devices and users over time. And we haven’t even touched on the performance benefit in DSM and all of the first and third party applications when we factor in support of Gen3 SSDs for caching or storage pools in the DS923+, both of which are going to allow much better, long-term utilization and overall, a much smoother experience for a considerably longer amount of time than that of the DS423+. Ultimately, if you think your utilization of the NAS is going to grow steadily and increasingly over time, the DS923+ is the better choice here in terms of software, in and out of DSM.

Synology DS423+ vs DS923+ NAS – Conclusion and Verdict

Unsurprisingly, what we have here is an old-fashioned case of getting what you pay for. The DS423+ is a very solid, and reliable NAS solution and is definitely more than capable of running the bulk of modern NAS hardware needs, also, remaining pretty flexible in the resources available to it on day one to get the job done. Equally, for home users and particularly those seeking a more flexible approach to multimedia, the DS423+ does bring a decent amount of bang for buck when you compare it against the bulk of other Synology solutions in the brand’s portfolio. But it just pales in comparison to the sheer scope of scalability, upgrade options and flexibility long-term that the DS923+ provides. And regardless of whether you’re a business user or a home user that may perhaps be looking to do something more aggressive with their storage down the line, the DS923+ justifies a lot of the extra expense, simply by the weight of it having that ECC memory, twice the default memory on day 1, Gen3 SSD NVMe storage options, expandability, 10G as an optional extra and the scale of how far you can upgrade the memory. As mentioned earlier, we have to at least acknowledge that a lot of these advantages that the DS923+ presents compared with the DS423+ are ones that you will only really take advantage of if you spend a little bit more money, but having the option for that scalability down the line for many users is going to be worth the investment on day one. Side by side, in most cases, the DS923+ will comfortably outperform the DS423+ even in the default model, so you still aren’t losing out just because you’re paying extra for upgrade options you may not use later down the line.

Synology NAS
Amazon Price:	Synology DS423+ NAS $479 (Amazon 25/02/24)	Synology DS923+ NAS $599 (Amazon 25/02/24)

SUBSCRIBE TO OUR NEWSLETTER
[contact-form-7]
Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. [contact-form-7] TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

WE LOVE COFFEE